Videos telling me my device is in safe mode but it is NOT

I've had the Lenovo Yoga 10 tablet for a year now and all was well until 1 month ago. Now intermittantly but more often than not, when I play a video I'm getting, "video can not be played in Safe Mode". What the %$£!!. The videos are of cute animals and stuff like from Facebook or Upworthy and funny stuff. The only safe mode I know of is YouTube settings and that is OFF in ALL my devices including the tablet.So if it's not that what the heck and what can I do about it??I've googled but there is absolutely nothing.Thanks for any help on this

If it's in recovery mode, you'll have to restore it.  No choice.

Similar Messages

  • I want to close the bokkmarks side bar, I have tried to open firefox in safe mode but this does not help.

    This morning I opened firefox as usual and found that a sidebar for bookmarks on the left side of this page. I did not request this to open and I want it removed from my computer. I do not like the way it uses up the space on the page. I have tried to open firefox in safe mode but his did not clear it. If I can not remove this sidebar I will want to close firefox.

    There should be a little 'x' Close button in the top right corner of the sidebar.
    Alternatively, Ctrl + B will close it too.

  • MacBook Pro won't boot - tried safe mode but it went to black screen after trying.

    my MacBook Pro froze after the fan was running very loudly. I turned it off and try to reboot but just got a gray screen. I tried to boot in safe mode but that did not work.any other thoughts on what might help?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My G5 tower will boot and run fine in safe mode, but...

    When I boot normally I get artifacting and it locks up. I replaced the video card, reformatted and installed a new copy of OSX, etc. Thanks!

    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Why will my iMac boot fine in Safe Mode but freezes on a normal boot?

    It is a 17" iMac.  1.83Ghz Core 2 Duo.  1GB RAM.  160GB Hard Drive.  Combo Drive with Intel GMA 950 GPU. 
    I took out the screen and put in in a different computer a while back.  This was a working computer before hand.  I pulled it off the shelf the other day to get it going (using an External Monitor) and when it gets past the Apple Screen, it goes to the blue screen, and then loads the wallpaper and some of the taskbar, but no dock and it freezes.  (This is on a fresh install of Leopard).  When I boot to safe mode, it boots fine.  I have tried reseating RAM, different RAM sticks, and a different hard drive. Also replaced PRAM battery.  Done a SMC reset and a PRAM reset.  No change.
    Also worth noting was that when I tried to boot my Leopard disc, it would freeze at the Choose Language screen.  So I took the HD out and installed Leopard thru my other iMac and reinstalled OS X.  Did the same thing when I tried to boot from a Snow Leopard disc. 
    Ideas??

    Hello, in Safe Mode did you try setting a good resolution on the Display?
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons
    See this great post by themachead on how to list the extensions in Safe Mode with System Profiler then compare to the extension folder!
    http://discussions.apple.com/thread.jspa?messageID=10161377&#10161377

  • My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great, My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great

    My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great, My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great

    HI,
    First, there are no Mac viruses in the wild.
    recently random sites have had a warning message thing come up that looks like a Norton Anti-virus telling me to run my browser in 'safe' mode or something.
    So far it hasn't really done anything malicious, but I'd like to stop it before it does.
    The file is an .exe file and unless you are running a Windows partition on your Mac, the Mac OS X cannot open those files. You're OK! If you are running Windows then you would need anti virus software, but it would be installed on the Windows partition, not the Mac OS X.
    Nothing to be worry about. They are trying to get your to purchase anti virus software. Norton a/v for a Mac is the worst thing you could install. It's invasive and impossible to UNinstall.
    You are running Snow Leopard... read here.
    Mac Has You Covered - Defense against viruses and other malware
    Carolyn

  • Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?

    Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • My Mac starts up fine in safe mode, but freezes before the login screen in normal mode.

    I have the 2012 MBP, 4 GB of RAM, 500GB HD, 2.5GHz Intel i5 processor.  Everything worked fine, until one day it freezes all of a sudden.  I shut down and restarted.  The Apple logo appears with the loading animation underneath.  A few moments later, the animation disappears, and the mouse cursor appears.  This is normal.  What's not normal is that it stays on this screen forever.  I can't get to the login screen even after waiting sooo long.  Even restarting 5 times only repeats this problem.  I finally boot into safe mode.  I am able to login and get to the desktop in safe mode, but not normal mode.  Clearing every startup item in System Prefs, and in the startupitems folders does not solve the problem.  Disk utility says no problems.  Resetting PRAM does nothing.  Can anyone please tell me what I should do next?

    Do you hear the startup chimes?
    If so, then the startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utillities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
    Make sure to back up all important files first before using OS X Recovery.
    OS X Recovery does require a broadband high speed internet connection.

  • Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

    hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
    my problem is
    imac works fine in safe mode,
    but when you try to startup normal it's connstantly restart by it self.

    in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't  see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

  • My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

    My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

    If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key.  If you Macbook boots to your desktop then you have a faulty cable.  If you get the same error, then your hard drive just died on you.
    good luck.

  • MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

    Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

    Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
    Run the Startup Manager to select Startup disk:  http://support.apple.com/kb/HT1310
    If those did not work your disk may be sick or dying.  The top priority at this point is to make a backup copy of your data.
    Check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Even if it does not show “Verified” you can still attempt a backup. 
    Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.
    If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable.  A trip to an Apple store for confirmation would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one.  Any 1 TB external drive will do.
    Assuming it is still breathing you can try to recover the data without booting from the sick disk. 
    Reformat the external disk.  (This will erase all data on the external disk.)
    Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    It may take a long time for the backup.
    If that will not complete post back for other emergency data recovery methods, including those from a brody.
    If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it does not finish with a green OK message try to repair it once or twice more.  If it repairs with a green OK message, will it boot normally?  If not, boot from the Recovery Partition and reinstall OS X.
    If it is still not healthy, post back for further instructions.

  • G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

    14" iBook G4 1.2GHz with 1 gig of RAM.
    I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
    After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
    It was then that I got to experience the first of many kernel panics.
    Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
    Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
    I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
    Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
    I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
    When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
    I've tried running fsck, but nothing changes.
    I'm still not sure why it seems to work in Safe Mode but not in regular mode.
    I'd appreciate any suggestions or ideas.

    Hi,
    A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
    John

  • I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

    I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

    Hi jim1287,po
    Check for the latest updates. Installing latest updates should resolve this problem.
    Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
    Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
    Regards,
    Ajlan Huda.

  • When i double-click the mozilla icon, it doesn't start. In the task manager i noted that the process "firefox.exe" appears and desappear after 5 seconds. The problem remains in mozilla safe-mode, but not in windows safe-mode. Thks!

    Yesterday i installed the firefox 6.0 on my windows 7 computer. When i double-click the mozilla icon, it doesn't start. I opened the task manager and noted that the process "firefox.exe" appears and desappear after 5 seconds. I tried to start mozilla in safe mode but the problem remains. The only way to use mozilla in my computer is restarting the windows in safe-mode. Last thing: i already tried to reinstall the program. Please help me!

    I'm also using Windows 7 on a Lenovo U310 laptop.

  • HT204074 I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help

    I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help

    If you want to add it then you need to do one of the 3 things mentioned on that page e.g. use iTunes Match on your iPad, use automatic downloads on it, or redownload one of your past purchases. I think that the 'manage devices' section will only show when you have one or more devices/computers associated to your account, if you don't have any associated then it won't appear.

Maybe you are looking for

  • Can anyone tell me if this error report information points to something specific wrong with my MacBook Pro?

    Hi All, I pasted the error report info below that the most recent error brought up. My MacBook Pro will, on occasion, freeze up on me and usually turn the monitor completely black. This also happens occasionally when trying to boot up from a Standby

  • Error while posting mb1c

    He seniors, I am getting error while posting stock in T. code- MB1C Error- G/L account 799999 dose not exists in company code. dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their thanks......

  • After downloading FF 20.0.1, I can no longer open multiple FF windows; tabs still work.

    I upgraded directly from version 18.0, and now I can't open more than one Firefox window. Like I said, all my tab functions are still working, but I'd like to be able to open multiple windows at times. I had the same problem with version 19.0, which

  • Query syntax check

    Hello all I wrote an query and regarding one part, i have syntax problem, when should we seperate different arithmetic operators in a query? for example select  density_with_desert.popp  /  density_with_desert.arr  -  sum(darea)  from counytyi don't

  • Life in months is not populating from interface in Mass Additions Post

    Hi, We have one critical issue in FA conversion.We have popultaed the life_in_months in fa_mass_additions table.When we run the Mass Additions Post,it is defaulting the life_in_months from category and not from fa_mass_additions interface table.As pe