Videos using .RAM format

Is the OS X able to view a video in the .RAM format and if so how? Thanks.

Download plug-ins from Real Networks. It's their format.

Similar Messages

I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them to upload to youtube but it won't let me import them.

I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them so i can upload them to youtube but it won't let me import them, even after changeing them to MP4 format, it just comes up with the message: "No Importable Files None of the selected files or folders can be imported. Change the selection and try again."
Ive even tried opening in itunes and copying from thier but they wont open in Itunes, no message or anything they simple just dont open. its strange because it does open in quicktime player.
please if anyone has any ideas that can help me please let me know XD thanks.

First problem: You're fine. The hotter it gets, the more the fans spin up. The computer is designed so that at max load, at max fan speed, it won't overheat (unless it's obstructed by something, e.g. sitting on your bed swallowed by a comforter). It's not the best thing to keep it that toasty for days at a time, but a couple hours at a time shouldn't be a problem.
Second problem: If something in the trash won't delete, just use Secure Empty Trash and it should be fine. Since .torrent files are quite small, it should only take a couple seconds.

Problem Exporting a Video Originally Imported using F4V Format

the last version of flash i used with Macromedia Flash MX. Now i'm using Flash CS6, in fact this is my first time using it and i've been trying to get this task done for just over 12 hours now but i can't seem to figure it out....
I have 3 videos that i split up into 3 scenes using windows live movie maker
then i used media encoder to convert all the cenes to F4V
From there, i imported the first Scene of each video into individual layers in Flash CS6 used the "Load external video with playback Component Method
The reason why i use that method was because when i use the other method with the video in FLV format the video and audio was out of sync when i exported/test scene
with the load external video method it works perfect in test scene... pretty much the way i want it to, however when i export the video it doesn't even play my best guess is that's because each video is only on one keyframe. and needs to be converted and action added.
am i right? where do i go from here? how can i export these scenes... what am i missing?

these are the supported youtube formats:
.MOV
.MPEG4
.AVI
.WMV
.MPEGPS
.FLV
3GPP
WebM
and, of those, only mov and avi can be exported from flash pro. those exports are usually unsatisfactory because flash pro is not a video editing program. ie, you are using the wrong tool for the job.
check adobe premiere.

Unable to play recorded video using BB multimedia api in other platform

Hi all,
I am new to Blackberry application development. The application I am developing it is required to record a video using multimedia api.
I am using
video encoding : MPEG-4
audio encoding : AMR
res : 320 x 240
Device using Curve 8250
It is the same encoding combination BB curve use to record a video from default recorder.
_player = Manager
.createPlayer("capture://video?encoding=video/3gpp&width=320&height=240&fps=12&video_codec=MPEG-4&audio_codec=AMR");
After recording it from my application I am able to play the video in vlc even in BB devices. But when I am trying toplay in android,J2ME and iPhone platform. It is unable to play the video..Can anybody help me out in this regard.
I am really in trouble. I need your help .
Thanks in advance.
Regards,
Angan

In my experience if windows media player plays it(the mpeg4), it will not be compatiable with quicktime. At least if you do not go installing the codecs to read ISO mpeg 4 (.mp4 is the standard extension that quicktime puts on the files). Another thing to check is if you are creating ISO compliant files. The mpeg4s that windows media reads by default are not ISO compliant. You also need to keep in mind that Quicktime is a simple profile mp4 and main profile mp4 player (although not all b frames are compatable with quicktime). See http://en.wikipedia.org/wiki/Quicktime for a basic overview of the profile support. I suggest that you try playing the media with free softwares such as vlc http://www.videolan.org/vlc/ and mplayer http://www.mplayerhq.hu/design7/news.html and check that the format and codecs are correct. Although they will play non standard files they will list the codecs in use (make sure that you are using ISO compliant standards as you can put more than MPEG 4 in mp4).

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

LRP
Thanks for the follow up.
In Premiere Elements 13/13.1, your export choices are in the Publish+Share section of the project. There are several choices and sub-choices.
Example: Publish+Share/Computer/and then a list of choices under that, such as, MPEG, AVI, AVCHD, XAVC-S, Windows Media, QuickTime, Image, Audio.
And each has Presets which define the export settings. Adobe offers default settings which are usually optimized ones. But, it also allows you to customize the preset selected. You do that by clicking on the Advanced Button of the selected preset and customizing the settings under the Video Tab, Audio Tab, and, if applicable, Multiplexer Tab.
From what you wrote, I thought that you might be asking about exporting a video with a video codec = Photo JPEG.
To do that you would to to
Publish+Share
Computer
QuickTime
with Presets = either the one for 4:3 of 16:9 as appropriate for your project,
and then clicking on the Advanced Button, and then the Video Tab under the Advanced Button.
Then selecting Photo JPEG for the video codec field.
Tip: The QuickTime choice is not seen unless you scroll down the list of Computer choices. Use the thin scroll bar to the right of the Computer choices.
Please explore Premiere Elements 13/13.1's Publish+Share/Disc/DVD with standard or widescreen preset for your creation of the DVD-VIDEO on DVD disc.
The Premiere Elements timeline destined for this choice could consistent of supported photos and or videos.
Please consider.
Any questions and need clarification, please do not hesitate to ask.
ATR

Is there a way to turn off using ram as intermediary when transfering files between 2 internal hdds? (write cache is off on all drives)

right forum? first time here. none of the options seem perfect. so i guess this applies to 'setup.' i tried to describe what's happening verbosely from the start of a file transfer to completion of writing file to 2nd hard drive.
win 7 64bit home - i2600k 3.4ghz - 8gb of ram - 2hdd 1 ssd
I have this problem when transferring files between 2 internal hard drives. one is unhealthy (slow write speeds but not looking for advice to replace it because it serves its unimportant purpose). so, the unhealthy drive drops into PIO mode - that's acceptable.
however, a little over 1gb of any file transfer is cached in RAM during the file transfer. after the file transfer window closes, indicating the transfer is "complete" (HA!), it still has 1gb to write from RAM which takes about 30minutes. This would
not be a problem if it did not also earmark an additional 5gb of ram (never in use), leaving 1gb or less 'free' for programs. this needlessly causes my pc to be sluggish - moreso than a typical file transfer file between 2 healthy drives. i have windows write
caching turned off on all drives. so this is a different setting i can't figure out nor find after 2 hours of google searches.
info from taskmanager and resource monitor.
idle estimates: total 8175, cached 532, available 7218, free 6771 and the graph in taskman shows about 1gb memory in use.
at the start of a file transfer: 8175, 2661, 6070, 4511free and ~2gb of ram used in graph. No problems, yet.
however, as the transfer goes on, the free ram value drops to less than 1gb (1gb normal +1gb temporary transfer cache +5gb of unused earmarked space = ~7gb), cached value increases, but the amount of used ram remains relatively unchanged (2gb
during transfer and slowly drops to idle values as remaining bits are written to the 2nd hard drive). the free value is even slower to return to idle norms after the transfer completes writing data to 2nd hard drive from RAM. so, it's earmarking an addition
5gb of ram that are completely unused during this process. *****This is my problem*****
Is there any way to turn this function off or limit its maximum size. in addition to sluggishness, it poses risk to data integrity from system errors/power loss, and it's difficult to discern the actual time of transfer completion, which makes it difficult
to know when it's safe to shutdown my pc (any data left in ram is lost, and the file transfer is ruined - as of now i have to use resmon and look through what's writing to disk2 -> sometimes easy to forget about it when the transfer window closed 20-30minutes
ago and the file is still in the process of writing to the 2nd disk).
Any solution would be nice, and a little extra info like whether it can be applied to only 1 hard drive would be excellent.

Thanks for the reply.
(Although i have an undergrad degeee in computers, it's been 15years and my vocab is terrible. so, i will try my best. keep an open mind. it's not my occupation, so i rarely have to communicate ideas regarding PCs)
It operates the same way regardless of the write-cache option being enabled. It's not using the 5gb for read/write buffer - it's merely bloating standby memory during the transfer process at a rate similar to the write speed of destination (for my situation).
at this point i don't expect a solution. i've tried to look through lists of known memory leaks but i dont have the vocabulary to be 100% certain this problem is not documented. as of now it can't affect many people - NAS's with low bandwidth networks, usb
attached storage etc. do bugs get forwarded from these forums? below i can outline the consistent and repeatable nature not only on my pc but on others' pcs as well (2012 forum post i found).
I've been testing and paying a little more attention and i can describe it better:
Just the Facts
Resmon Memory Info: "In Use" stays consistent ~1gb (idle amount and roughly the same when nothing else is running during file transfer)
"Modified" contains file transfer
data (meta data?) which remains consistent at little over 1gb (minor fluctuations due to working as a buffer). After the file transfer window closes "Modified" slowly diminishes as it finishes lazy writing (i believe that's the term). I forget idle
pc amount, but after transfer this is ony 58mb)
"Standby" as the transfer starts it immediately rises to ~2gb. I'm sure this initial jump is normal. However, it will bloat well over 5gb over time with a large enough transfer increasing at a consistent rate during the entire transfer
process. the crux of the matter.
"Free" will drop as far as 35-50megabytes over time.
as the transfer starts, the "Standby" increases by an immediate chunk then at a slow rate throughout entire transfer process(~1mb/s). once writing metadata to RAM no longer occurs, the "Modified" ram slowly (@500kb/s matching resmon disk
activity for that file write) diminishes as it finishes lazy writing, After file is 100% written to destination drive, "Standby" remains a bloated figure long after.
a 1.4gb transfer filled 3677MB of "Standby" by the time writing finished and modified ram cleared. after 20minutes, it's still bloated at 3696MB. after 30-40mins it's down to 2300mb - this is about what it jumps immediately to when transfer starts
- it now remains at this level until i reboot.
I notice the "standby" is available to programs. but they do not operate well. e.g. a 480p trailer on IMDB.com will stop-and-go every 2-3seconds (stream buffers fine/fast) - this would be during the worst case scenario of 35-50mb "Free"
ram. my pc isn't and never was the latest and greatest, but choppy video never happens even with 1 or 2 resource hogs running (video processing/encoding, games, etc).
Conjecture Below
i think it's a problem when one device is significantly slower at writing than the source device - this is the factor that i share with others having this problem. when data is written to modified ram then sent to destination, standby memory is expanded
until it completely or nearly fills all available RAM - If the transfer size is large enough relative to how slow the write speed of destination device is. otherwise it fills it up as much as the file size/write speed issue allows. the term "memory leak"
is used below but may not technically be one, but it's an apt description in layman's terms.
i saw a similar post in these forums (link at end). My problem is repeatable and consistent with others' reports. I wasn't sure if i should revive it with a reply. some of these online message boards (maybe not this one) are extremely picky
and sensitive, lol.the world will end if an old thread revives - even if for a good reason.
i can answer some of the ancillary issues. one person (Friday, September 21, 2012 8:33 PM) mentions not being able to shutdown, i asume he means stuck on the shutdown screen - this is because lazy writing has not completed - his nas write speed is significantly
slower than reading from source - the last bits of data left in ram still needs to be writen to the destination. shutdown will stall for as long as needed until the data finishes writing to destination to prevent data loss.
another person (Monday, September 24, 2012 6:31 PM) mentions the rate of the leak, but the rate is more likely a function of read speed from source relative to write speed of destination. which explains why my standby expands closer to a 1:1 ratio compared
to his 1:100 (he said 10mb per 1000mb)
we all have the same exact results/behaviour, but slightly different rates of bloating/leaking. as the file is written from from the ram to the destination, standby increases during this time - not a problem if read and write speeds are roughly equal (unless
your transfering a terabytes then i bet the problem could rear its head). when writing lags, it gives the opportunity for standby ram to bloat with no maximum except the amount of installed ram. slower the write speed, the worse the problem.
The reply on Wednesday, September 26, 2012 3:04 AM has before and after pictures of exactly what i described in
"Just the Facts". Specifically the resmon image showing the Memory Tab.
The kb2647452 hotfix seems to do some weird things relative to this problem. in the posts that mention they've applied it: after file completes it looks like the "standby" bloat is now "in use" bloat. as per info from Tuesday, October
09, 2012 10:36 PM - bobmtl in an earlier post applies the patch. compare images from earlier posts to his post on this date. seems like a worse problem. Also, his process list indicates it's very unlikely they add up to ~4gb as listed in the color coded bar.
wheres the extra gb's coming from? likely the same culprit of what filled up "standby" memory for me and others. it looks like this patch relative to this problem merely recategorizes the bloat - just changes the title it falls under.
Link:
https://social.technet.microsoft.com/Forums/windows/en-US/955b600f-976d-4c09-86dc-2ff19e726baf/memory-leak-in-windows-7-64bit-when-writing-to-a-network-shared-disk?forum=w7itpronetworking

How to play videos in other formats other than mp4 in ipod touch.

how to play videos in other formats other than mp4 in ipod touch.
I have tried an app named VLC streamer. But I never knew how to use it...
Can someone suggest anything else?

Under "General" in iTunes Preferences, does "Play
Videos in.." allow you to set the playback of videos
as you desire?
kind of. It does spawn a new window, which is great (thanks!). But it seems to be at a lower resolution - does iTunes compress further or display at lower res? What is the function that people are supposed to be able to use to use iTunes as a media center to watch movies?

I downloaded to iTunes using Lossless,can I burn cd's using another format?

I've downloaded all my music to iTunes using Lossless. What I want to know is,can I burn cd's using another format so I can get more music on to a cd for my car stereo.I would like to keep the Lossless format for my home stereo use.
All help is welcomed
Randy
17' iMAC Mac OS X (10.4.8) iTunes 7, external h/d for iTunes
17' iMAC Mac OS X (10.4.8) iTunes 7, external h/d for iTunes

Converting does not mean losing the original files.
iTunes creates copies of the files in the chosen format.
You can easily distinct them by looking at the 'Kind' column or by sorting on 'Date Added'. The converted files will have the most recent 'Date Added'.
Then put them in a playlist, choose 'MP3 CD' in the Burning preferences and burn them to CD-R.
If you don't like a long list of songs, read iTunes: How to set the play order of songs on an MP3 CD how to burn by artist or album.
If all went well, you can delete the mp3's from your library.
If you would like to keep them, but not in your current library, drag them from the library to a folder on your desktop and then delete them. Dragging to a folder will create copies of the mp3's.
If you're using iTunes 7, you could then create a second library and drop the folder with mp3's in that one.
Creating a second (third etc....) library is done by pressing and holding the Option-key when launching iTunes. Hold the key until you see a window which enables you to create or choose another iTunes library.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.1

Aperture Does Not Import Videos using IMPORT FOLDER AS PROJECTS

SOLVED - Aperture 3.2.1 does not import videos using "Import Folder as Project"
After 2 days of trying to figure this out (actually around 2 hours total) I've finally managed to import all my photos & videos last year. 200 Gigs 54,000 files. First few tries resulted with referenced photos only, no videos. I had no luck with Google, even tried moving a couple of .plist as mentioned from this thread: https://discussions.apple.com/message/11188017?messageID=11188017#11188017 - this worked for some but not for me. Some issues were solved by NOT selecting "Raw Only", this will cause Aperture to skip your videos.
Thank you to these people who took time to share. In return I am posting my micro contribution to the Aperture Community. FILE > SWITCH TO LIBRARY > then create a new library. You should be able to import your photos with videos in folders.
I hope this gets into Google soon. :-)

, I see only the file, where these photos are, not the photo names or thumbs inside the file (Aperture import path).
You mean in the Aperture Import panel the folder, where the jpegs should be, is empty?
Then you may have excluded jpegs from import in your "Import Settings".
Check the above settings in the "Import Settings" options in the "Import Window". I.e-make sure the Raw+Jpeg Pairs option is set to "Both", even if you do not import raws.
After reassembled all the programs to a new hard drive in Mac Pro
Is this new Harddrive your system volume? And are the jpegs you wat to import located on this drive? Or are the on another external volume? If yes, how is this volume formatted?
Have you checked the permissions and ownership of the jpegs?

Converting home video using iTunes

I have a new iPod with video 3rd generation. Everything works great with all video I purchase through iTunes (I'm using the latest version for XP). However, when I try to convert a home video file (in the correct format) to play on the iPod, only the audio plays... the video portion is white. For example, I take a video clip (.avi format) and convert to .mpeg4 or .mov or other acceptable video format and import it into iTunes. The video plays back great in iTunes. I then 'convert' so I can install on the iPod, and the video turns white and only the sound comes through. Any thoughts? Thanks.

No offence taken!!! As you sent your response I finally got success! I am not sure what the problem was.... I seemed to have a dll clash, but not sure if that caused any issues. Anyway, re-downloaded and installed and all seems to be fine now. Thanks so much for your help and perseverance! I shall now continue to convert my videos.

HT3775 how do you play a video with this format/title DVDSCR XViD AC3-sC0rp?

How do you play a video with this format " DVDSCR XViD AC3-sC0rp" using quicktime?

Try this. It can handle formats Quicktime can't:
VLC

I make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
I know this is not the best fix, but it might work.
You can duplicate an edit in the main screen, then delete the last bits and export,
do the same for the other half.
Then import the two bits (or more if you need) in a new edit.
Out of curiosity, can you post what format the video is in?
Copy a video straight from the camera to your computer.
Open it in Quicktime player, and with out playing type Apple + i
or Control + i for PCs
It should tell you lots of info about the video, and might help us to see what is wrong.
This is what it looks like:

Video used to wrk but doesn't now.

I need some help figuring this out. I used to use the video chat feature all the time when i was running tiger and everything worked great. Now that i have upgraded to Leopard i always get the same message: A communication error has occurred while trying to connect to 'ScreenName'.
Here is my set-up
White Macbook 2GHz Core 2 Duo
2 GB RAM
OS 10.5.4...upgraded from 10.4.?
Video used to work but will not work anymore. Tested on my Airport express at home where my iMac with same OS works just fine. Firewall settings are the same and quicktime streaming rate is the same. Any help will be greatly appreciated. Thank You.
--Jesse

Make sure Internet Shring id Off in System Preferences > Sharing
10:00 PM Friday; August 8, 2008

CS4 using a Mac and want to play video using windows media player

Hi I am having issues with file types to play video back using Windows media player.
I am producing video using Premiere CS4 on a Mac and I need to know what format to use to have the files play in windows media player as .mp4 is not compatable with wm player.
Thanks

I have Windows Media Player installed on my PC workstation and I do remember installing a codec so that MP4 files could play in WMPlayer 11 on Windows Vista 64-bit (should work on 32-bit also)
look near the bottom section of this link for further information. The codec is called DirectShow
http://support.microsoft.com/kb/316992#34
Otherwise if you're posting videos on a webpage for example in the mp4 format use the Quicktime html wrapper so that people using Mac's can also view your videos that are encoded for PC's. If you encode in wmv format (Windows Media Video) then provide a link to the "Flip4Mac" application that can use Quicktime on the Mac to play Windows Media Files. I think you can find it on www.mactopia.com .

How to embedd video using adobe 9 pro, and making it compatible to earlier versions?

Many companies lag in updating the latest version of adobe reader for their field employees. I am dealing with a company now that has field computer with version Adobe reader 6.
Using adobe 9.3 Professional.
How can I embed a video (video format - mpeg, wmp, mov, etccc) into the document and be able to run this adobe file in reader 6 or above and it be able to run.
I would like to send the file with the video embedded directly into the file, and would we fine with adobe popping a new window to play the video using Windows media player.
The problem that I am seeing is there seems to be a path that gets defined when you embed a video file.
The idea here is to create a portable file that can go out to the field, with this defined path from the orginating computer seems to be assigned to the file and thus crashing the abilty to run the video, when place on other computers.
Any advise?

You won't find any specifics about future versions of Adobe software on these forums, those involved in the programs all operate under an NDA.
Speaking in general terms the user interface for the Acrobat Family was defined back in version X after a lot of consultation with the target customer groups (enterprise knowledge workers), so it's not surprising that Adobe have stuck with it ever since. Major UI changes scare big enterprises as they get hit with a huge bill for retraining their staff.

Videos using .RAM format

Similar Messages

Maybe you are looking for