Vienna Suite plugins problem, post Logic X install

I just installed Logic X, without un-ininstalling Logic 9, and now my Vienna Suite plug-ins say that "it is not licensed to run, check that the dongle is inserted". This is only for the Suite plug-ins. Vienna Instruments and Ensemble, etc all work still. Anyone know what is going on? I've already updated the maintenance for the eLicenser Control Center as well...

Contact VSL and ask them for assistance....
They are usually pretty quick at resolving such issues...
http://www.vsl.co.at/en/65/75/281.vsl

Similar Messages

Problem while trying to install OVI suite

Hi, guys! How you doing? I've got a problem while trying to install OVI Suite: I'm getting a warning signal that says "Something got wrong - Nokia Ovi Suite installations require that PC Connectivity solution 7.0.0.0 or a later version to be already installed before continuing installation" and I can't install after that. I've been searching at Google, but I have found nothing. Hope you can help me. Thanks in advance.
Attachments:
error.png ‏7 KB

Many thanks : I had been directed to this file already, but it was the french version, with many translation mistakes that made it unusable. Much clearer in english.
I have
Again the tab problem !
Message Edité par chilly charly le 12-06-2005 02:45 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Problem opening logic 9 in Mountain Lion

Hi there
Just bought a new 13" Pro and wondered if anyone else has had problems opening Logic in Mountain Lion.
The whole of Logic Studio has been successfully moved across with Migration asssistant, except Logic Pro itself whichwon't open because:
'You can't use this version of the application "Logic Pro 9.0.0.app" with this version of OS X.'
Problem is when I I try to install the update 9.1.7 I get the message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.
I also get this message when trying to install the 9.1.7 update on my old MacBook Pro, which has the original version of Logic 9.
Any suggestions?

Post in the Logic Pro forum area.

Oracle SOA Suite (10.1.3.3.0) install as Windows service

Hi Guys,
This is a repost. Since the original thread was kinda hijacked, I think maybe I should start a new thread.
I was installing Oracle SOA Suite (10.1.3.3.0) on Windows Server 2003.
Original issue: by default installation, 10gAS cannot run as windows service.
Following MetaLink Note, I manually created OreacleMyHomeProcessManager service, after start this service, seems everything works fine now.
However, in original MetaLink Note it asked to create two services, another one is OracleMyHomeASControl - but the nmesrvc.exe file cannot be found anywhere in my installation, so I did not create it.
My questions are:
1. Do I really need to create the 2nd service?
2. Why the 10gAS works fine without this 2nd service?
3. Without 2nd service, any potential problems it may cause?
Thanks a lot in advance for reply!
WMC
null

Don't worry, you are good to go. I just posted my comments on the earlier thread:
Oracle SOA Suite (10.1.3.3.0) install question
Thanks
Shail

The Problems With Logic (as I see them) - PART TWO!

Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com

11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work.

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

ITunes fails to load. Message is Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services. Never had this problem before trying to install this upgrade

iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?

Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

Uninstall FCP for rendering problem? Then re-install?

I keep loosing my render files. I think the problem started when I installed an update for FCP. Now, the render files disappear. I'll render, but then they go away.
I've seen posts with others having this same problem. Would un-installing FCP work? Of course, I'll back up my video on an external drive - just in case. Then I'll re-install my FCP, hoping that this will solve my disappearing render files.
If you'd like more details to my rendering problem, here's the post I put up a few days ago that describes in greater detail what's happening...
http://discussions.apple.com/thread.jspa?threadID=1394901&stqc=true
Do you think un-installing would work?

Hi JGD 500, and a warm welcome to the forums!
I noticed there is no mention of hardware space - should there be? This information doesn't show up anywhere in the disc utility diagnostics/profile - leading me to the thing the harddrive is busted - but the hardware test found no problems.
Yes, I believe if it can't see the HD, it won't test it or even mention it.
I've seen several Notebook HDs die within a years time, they've always been the worst HDs, but I think the pressures of today's world are making them even worse.

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox s

Several problems continuous since first installing Firefox. Personal google search settings don't save; remember me options on web sites like Facebook aren't remembered; Youtube and Flixy videos don't play despite removing/reinstalling/upgrading Firefox several times; upgraded the latest flash plugin today, but no difference, symptoms are black play box with youtube and white box with Flixy. Disbale AV and antimalware makes no difference either.
== URL of affected sites ==
http://

I have a new problem with secondary web pages opening up without any action on my part other than simply moving the mouse pointer across the screen.

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6 & a mac osx 10.7.5 I have downloaded the pluginhttps://sourceforge.net/projects/panotools/ I drag it to the applications folder (applications/photoshop/plugins) and it shows up there, but it does not show up when I reopen photoshop, can anyone tell me if this is a valid plugin or what I am doing wrong?

Thank you for the link, I don't see where the licensing is listed at all, I also don't see where it says it is for existing CS2 users only & the line install a special version that does not require activation -
doesn't scream it'd be a problem to load it especially since I already own a later version that I can't use the plugin on - …I don't find the site all that informative. I appreciate all the answers & responses to my use of CS2 but I'd really just like to receive an answer to the original question of if the plugin works with it or not…if anyone has that answer I'd appreciate it.
Is there a place I can purchase it? I will gladly do so if I can get the plugin to work-that is my goal.

Several problems on new openbox install

Hi guys I switched out my computers and installed openbox on my new one (2001 computer ). First of all I finally got x.org to work on this computer. hurray for me. ok first problem
1. I installed gtk-chtheme to change my gtk2 themes and i installed the clearlooks package to try it out, but it segfaults on me when i try to change a theme.
[jeff@open-box ~]$ gtk-chtheme
/usr/share/themes/Clearlooks-Olive/gtk-2.0/gtkrc:44: Clearlooks configuration option "menuitemstyle" is not supported and will be ignored.
/usr/share/themes/Clearlooks-Olive/gtk-2.0/gtkrc:45: Clearlooks configuration option "listviewitemstyle" is not supported and will be ignored.
/usr/share/themes/Clearlooks-Olive/gtk-2.0/gtkrc:46: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
/usr/share/themes/Clearlooks-Olive/gtk-2.0/gtkrc:44: Clearlooks configuration option "menuitemstyle" is not supported and will be ignored.
/usr/share/themes/Clearlooks-Olive/gtk-2.0/gtkrc:45: Clearlooks configuration option "listviewitemstyle" is not supported and will be ignored.
/usr/share/themes/Clearlooks-Olive/gtk-2.0/gtkrc:46: Clearlooks configuration option "progressbarstyle" is not supported and will be ignored.
Segmentation fault
2. I have pcmanfm as a file manager and I would like it to start up with the same settings that I just told it to use. I like it to set my background and use icons on the desktop (all of which can be turned on via it setting dialog). I have it started as pcmanfm& in my autostart.sh. Then I found a post somewhere that said to use the -d option but that didn't work either.
3. I use obconf and obmenu to manage my openbox setup, but they won't work. They give me a "operation not permitted" type message. I ran obmenu as root (via sudo) and it worked perfectly. obconf still didn't function as root or a regular user. weird
4. I have no sound as well. I installed alsa and turned up the volume controls and unmuted them. no luck. do i need esd or something as well?
Last edited by theringmaster (2008-05-03 16:28:41)

I'd check the permissions and ownerships in my home directory if I were you. Your third problem is almost certainly caused by something along those lines: either rc.xml itself is unwritable, or one or more of the directories in its path is. It's just about possible the autostart.sh problem is related. Is autostart.sh executable by your user?
The last one: No, you don't need esd. Just a thought, one of those "obvious-but-it's-best-to-check" things: is your user in the audio group?

Problem updating Logic Studio

Hey there all,
I have been having a problem updating Logic Studio 9. My purchased version is 9.0 (full, not upgrade) and I tried to update to 9.1 a while ago. When I did it, I got this very strange error message that said there was a system error of some sort. This of course sent me in to a panic, however my system itself seems to be stable, so I can only assume this is a problem with the updated software.
Eventually, I deleted the updated software (which left 9.0 on my system), and since then (this was a WHILE ago), I've spent a lot of time trying to figure out what to do to be able to update the software. I can't tell you how many times I have uninstalled, reinstalled, and re-uninstalled the original disks. I just can't get the software updater to recognize that I uninstalled 9.1 so that I can re-download the software update. And for god know what reason, I am not able to connect to the downloads server to get the upgrade.
Can anyone tell me where/how/if I can fix this?? Logic 9.0 keeps crapping out on me. I'd like to have access to my songs, etc.

hi, Colpanique.
A couple of ideas. Is your OS up to date? Are you running SL? It's better for LP9 than Leopard. Is LP9 registered?
Software updates sometimes have a proapp u/date. This is for Logic/final cut etc. If they aren't on your system, the later LP u/date might not install.
Another reason why LP 9 caps out is ram. I have LP8, and I know 9 requires more ram. 1G is at the low end, and might be insufficient for the OS and LP9. Run out of ram and the app will crash. This true if you load samples or drums etc,
If LP 9 isn't registered, the apple server won't let you get 9.1. I tried, as I wanted to go from 8 to 9 and bypass the bugs in LP 9.0. 9.1 is more stable.
Anyway, hope thsi is of some help. Good Luck. Scorpii Pirates.

Problem with Logic Pro 7 Academic Version

I've been using my academic version of logic pro 7 for about a year, and just recently it hasn't been starting up the way it used to. Usually when it launches, it says logic pro 7: academic version. But now it just says logic pro 7 and tries to run it as a one day trial of the retail version. I tried to get help over the phone but they were saying that they can't help me troubleshoot because they can only help out with logic studio. basically, they say to just reinstall it and if still have problems post it on this discussion. so here i am after the reinstall with the problem still occurring. some help please?

i just updated my xskey from the xskey updater in the utilities folder and it works now.

9i Developer suite login problem. help needed ASAP

i installed oracle 9i developer suite, my problem is i can't login. this is the error ora12560: TNS: oracle adapter error.
or
if i put the hostname it displays a no listener error and closes. i tried to create a listener in net configuration assistant, but i can't see it in services.
i'm using windows XP. and not conneted to any machine.
do i need any changes on my window settings?
please help...
thanks
here is my listener.ora
ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\OraHome)
(PROGRAM = extproc)
tnsnames.ora
TEST.ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test.ABC)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)

check your operating system network protocole is TCP/IP is installed if so check is there any problem with these protocoles. this error is encounter generally due operating system network protocoles it is not an oracle error. here is discription.
TNS-12560 TNS:protocol adapter error
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors.For further details, turn on tracing and re-execute the operation. Turn off tracing when the operation is complete.

Vienna Suite plugins problem, post Logic X install

Similar Messages

Maybe you are looking for