Vietnamese Character in PO printing
Hi,
Were doing SAP vietnam, one challenging is how to make the PO prinout capture the Vendor Name written in Vietnamese character..
The vendor master name is created/entered in the vietnamese character, during PO creation, the correct vendor name in vietnamese character is captured but during PO printing, the vendor name is having inconsistent character..
eg. vendor name created in vietnamese Tạo mẫu
the vendor name change during PO printing T#o m#u
we are using a customize program Z(copied of orignal PO printing program and Zmedruck...
pls. help
This issue relates to the manner in which the print program is translating the characters, so i would strongly suggest work with your abaper & your basis consultant to ensure the requisite language packs are available.
Good luck.
Regards,
Vivek
Similar Messages
-
Character Mode Report Print in Developer 6i
How i can create character mode reports for efficeint printing on dot matrix printers. I m not asking about the Character Mode Template(in the report wizard). And how i can convert the existing reports to Character Mode.
I am using Reports 6i.Please post this question in the Rpeorts forum: Reports
-
Maximum number of character we can print in a column uing ALV grid display
Hi frnds,
My requirment is to print 500 charcter data in a column using ALV grid display.
Could any body tell me is it possible and the maximum character it can i print in a column using ALV grid dispaly.
Regards,
SandipanHi Sandipan,
refer notes 857823, 910300 and 959775. All these say there is a limitation of 128 characters.
857823 - ALV grid: Strings with a maximum of 128 characters
Symptom
Entries in cells of the type CHAR or string are truncated after 128
characters in the SAP GUI.
also refer,
ALV Grid Control (cl_gui_alv_grid), function module (Full-screen) Grid
(Reuse_alv_grid_display, SAPLSLVC_FULLSCREEN), SAPGUI, back end, front end
Cause and Prerequisites
The data table that is sent to the front end only allows character values
with the length 128.
Solution
This is the standard system behavior and cannot be changed. -
Character mode report printing
hi everyone,
When I am running report in character mode, it is working fine in previewer. But as soon as I am giving the printing from there, it is giving Rbe ERROR dialog box and runform is getting hanged. How can I get report printed directly from previewer in character mode report generation.
On the other hand if i redirect o/p to a file by making destination type file, then I am able to take to print of file. If any have a solution, please reply ASAP.
Thanking every one
AshishHi Ashish,
It is not clear from your question about the type of error message you are getting.
Please meake sure that the report is indeed a character mode report.
Please verify the following for that:
1. The mode in system parameters is defaulted to
'caracter'
2. In the property palette of the report, the "design in character units" should be marked as yes.
Please ensure that above points and try printing again.
thanks
The Oracle Reports Team -
Some of Vietnamese characters are not displaying in the PDFs.
Original Text : Số tham chiếu của ngân hàng
Text Displayed in the PDF: S tham chi u c a ngân hàngI assume you are running version 5.6. Take a look at the ^symbolset command in the Print Agent reference manual. You will see the supported code pages. You may need to revert to Unicode because as I said before, Vietnamese was not supported.
cheers
Chris
by the way...the default 1252 is WinLatin1 -
Character spacing messes printing and PDF exporting
I'm having problems printing and exporting to PDF from Pages.
The problem is that when I'm using Character spacing (ie. -7%) they display different on screen, on paper and in PDF. They display right on the screen. But PDF and printing get messed up, the spacing is not right and it adds more space to the fonts.
I'm using:
Mac OS X 10.5.1
Pages 3.0.1
Thanks,
FannarI was having the very same problem. I was trying to make a business card with my name centered and character spacing at 40%. The character spacing seemed to only work for the first character. When it came to print or export, the text had shifted left as if it were centered with the spacing applied.
Fear not! I found a solution. Instead of directly printing or exporting as a pdf, I chose to save as a PostScript file in the print dialog. I could then open this file in Preview and save as a pdf or print with the designed character spacing.
File>Print>PDF>Save as PostScript..
This work flow also fixed some nasty degradation of smaller fonts.
Pages Developers take note! -
Hi,
How can I set the character spacing when I printing?
eg. 10 CPI or 12 CPI etc. /CPI=Character Per Inch/
thx.Hi,
How can I set the character spacing when I printing?
eg. 10 CPI or 12 CPI etc. /CPI=Character Per Inch/
thx.Printing on what? Console or a UI component? -
How to print Chinese character in Zebra printer?
Hi,
Could you please advise how to print Chinese in Zebra printer, I have added below ZPL command line in SAPSCRIPT, but it did not work.
^CW1,B:MSUNG.FNT
FO711,60A1N,47,79CI17F8FB1561,3,0,LFN998^FSHi,
go through the following links.
[Printing Chinese Characters on Labels using ZEBRA;
I hope it helps.
Regards,
Rohit -
Junk character in ME23N print preview
Hi
the bleow text is maintained in at item level in tab strip 'Texts' in ME23N for Purchase order.
PRIX : 77,00 u20AC
REMISE 18 % : 13,86
Test ajout euro u20AC u20AC
autre test u20AC
when click on print preview.text is displayed as shown below
PRIX : 77,00 #
REMISE 18 % : 13,86
Test ajout euro u20AC#
autre test u20AC
Please suggest me the solution.
Regards
KiranHi,
is a placeholder for non printable signs such as horizontal tabs and many others.
Please check the hex content of the text in debug mode. There should be no spaces there.
Regards,
Klaus -
IPod's display of Vietnamese character
Does anyone know why iTunes can correctly display vietnamese characters, but iPod doesn't? Is there a way to remedy this?
This page shows the languages currently supported on the iPod.
http://support.apple.com/specs/ipod/iPodwith_video_30_60GB.html -
How will the typed character in a textField not be printed
Hi all, I want to trap the typed characterfrom the user in a txtField. If
the character is not digit it will not be printed in the componet. I used
keytyped event with the folloing code...
char typedChar = e.getKeyChar();
String currText =txtFldMsBdIndxWeight.getText();
if (!Character.isDigit(typedChar))
if (currText.length()!=0)
currText = currText.substring(0, currText.length()-1);
txtFldMsBdIndxWeight.setText(currText);
else txtFldMsBdIndxWeight.setText("");
the problem is when the text of the componet is empty (currText.length()==0)
the non digit character will be printed in the componet, the code...
txtFldMsBdIndxWeight.setText("");is not working.
What am i doing wrong thank you for advance,
KostasHere is the JNumberField implementation for you
Ashish
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.text.*;
* <P>This Class is used to create number Text Field
public class JNumberField extends JTextField {
private boolean isReal=false;
private int digitCount;
private boolean copyPasteSupported=true;
* <P>This is a default constructor.It creates text field with length of 10 , right aligned and
* without decimal point
* @param
* @return
public JNumberField()
this(10,RIGHT,false);
* <P>This constructor creates text field with specified length , right aligned and
* without decimal point
* @param integer digitCount indicates the length of the text field
* @return
public JNumberField(int digitCount)
this(digitCount,RIGHT,false);
* <P>This constructor creates text field with specified length,specified aligned and
* without decimal point
* @param int digitCount indicates the length of the text field
* int alignment indicates the alignment.It can be LEFT or RIGHT
* @return
public JNumberField(int digitCount,int alignment)
this(digitCount,alignment,false);
* <P>This constructor creates text field with specified length,specified aligned and
* flag to assign decimal point
* @param int digitCount indicates the length of the text field
* int alignment indicates the alignment.It can be LEFT orRIGHT
* boolean isReal flag to set decimal point
* @return
public JNumberField(int digitCount,int alignment,boolean isReal)
this(digitCount,alignment,isReal,false);
* <P>This constructor creates text field with specified length,specified aligned and
* flags to assign decimal point and to support copy paste operation
* @param int digitCount indicates the length of the text field
* int alignment indicates the alignment.It can be LEFT or RIGHT
* boolean isReal flag to set decimal point
* boolean copyPasteSupported flag to support copy paste
* @return
public JNumberField(int digitCount,int alignment,boolean isReal,boolean copyPasteSupported)
setDocument(new NumberDocument());
setDigitCount(digitCount);
setHorizontalAlignment(alignment);
setReal(isReal);
setCopyPasteSupported(copyPasteSupported);
addKeyListener(new JNumberFieldKeyAdapter());
* <P>This method sets the flag to support copy paste operation
* @param boolean copyPasteSupported flag to support copy paste
* @return
public void setCopyPasteSupported(boolean copyPasteSupported)
this.copyPasteSupported=copyPasteSupported;
* <P>This method checks the copy paste is supported
* @param
* @ return boolean copyPasteSupported flag
public boolean isCopyPasteSupported()
return copyPasteSupported;
* <P>This method sets the Real Value support flag
* @ param boolean isReal flag to set the Real value
* @ return
public void setReal(boolean isReal)
this.isReal=isReal;
* <P>This method checks whether Real Value is accepted
* @param
* @ return boolean isReal flag
public boolean isReal()
return isReal;
* <P>This method sets the text alignment
* @param int alignment value can be LEFT or RIGHT
* @return
public void setHorizontalAlignment(int alignment)
if(alignment==LEFT || alignment==RIGHT)
super.setHorizontalAlignment(alignment);
* <P>This method gets the no of digits of text field
* @param
* @return int digitCount
public int getDigitCount()
return digitCount;
* <P>This method sets the no of digits of text field
* @param int digitCount of text field
* @return
public void setDigitCount(int digitCount)
this.digitCount=digitCount;
* <P>This is an inner Class which overrides the Document Class
public class NumberDocument extends PlainDocument {
* <P>This method overrides insertString method of PlainDocument Class
* @param int offset - The Location of a String to be inserted
* String String str - The String to be inserted
* AttributeSet a - Attributes of a text Field
* @return
* @Exception throws BadLocationException when the offset value is negative or exceeds the
* length of the text field
public void insertString(int offset, String str, AttributeSet a) throws BadLocationException
if((getLength()+1) >getDigitCount())
return;
if(str.length()==1)
if(Character.isDigit(str.charAt(0)))
super.insertString(offset,str,a);
else
if(str.charAt(0)=='.' && isReal())
if(JNumberField.this.getText().indexOf('.')<0)
super.insertString(offset,str,a);
else
boolean isStringContainsChar=false;
for(int i=0;i<str.length();i++)
if(!Character.isDigit(str.charAt(i)))
isStringContainsChar=true;
break;
if(!isStringContainsChar)
super.insertString(offset,str,a);
* <P>This is an inner Class which listens the Key Events
public class JNumberFieldKeyAdapter extends KeyAdapter {
String textBeforKeyPressed="";
* <P>This method captures the Key Event and prevents the copy paste operation
* if copy paste is not supported
* @param KeyEvent ke - captured Key Event
* @return
public void keyPressed(KeyEvent ke)
char keyChar=ke.getKeyChar();
if(keyChar=='\r' || keyChar=='\n')
System.out.println("EnterPressed ");
String modifire=ke.getKeyModifiersText(ke.getModifiers());
if((modifire.equalsIgnoreCase("Ctrl") || keyChar=='v' || keyChar=='V')&& !isCopyPasteSupported())
ke.consume(); -
Report cant print Chinese character properly when direct output to printer
I have follow the instruction {How to Print PDF/UTF8 in R12? [ID 778970.1]} {PASTA 3.0 Release Information}
I am able to print the chinese character properly in PDF format. (direct to printer)
However, some standard report like "Final Payment Register" "TEXT format" NOT able to print chinese character(direct to printer)
When I preview the report it can display chinese character properly.
Please adviseHowever, some standard report like "Final Payment Register" "TEXT format" NOT able to print chinese character(direct to printer)
When I preview the report it can display chinese character properly.Please see (What Happened To The Preliminary And Final Payment Register In R12? [ID 746339.1]).
Thanks,
Hussein -
Printing special character from report
I was reading thru the other discussion on the same subject as I hv a similar problem. I am trying to print the character ' in a report. Note that it is not coming from the database. It is a hard typed character in the text of the report. It works fine on NT but doesn't work when we run the report under Unix. Currently our report server is on Unix so.. It just prints a '?'. Any suggestion will be highly appreciated.
Thanks,I was wondering if there is a way to bypass
Unix fonts and send the character to the
printer using PL-SQL code in this
particular case. Any idea?Ideas, maybe, answers, no. I haven't had
that particular problem, but if I did, I
would:
1) First step: make sure you can generate
a report that has the correct character
code value and that your Unix OS doesn't
force it to '?' because of US7ASCII.
2) Second step: make sure the printer is
given something it can understand; the
character has to be in it's font palette
too. Either it has to know what to do
with B1 hex, or you have to put a header
in your output file telling it how to
interpret that.
Good luck, sorry I couldn't help more.
-- Allan Plumb -
Printing character dash on MICR printer
Hi,
C®UD-CHECT&C A®UH-UBNKL&A ®UH-UBKNT&C
I am Using the above code to print the check number and... On MICR printer.
Above the value of REGUH-UBNKL is 60020-002 on printer it is printing
60020 002 but I want to print this 60020002
I mean in between 60020 and 002 I want to print the character dash on printer.
For this what code changes I need to do in C®UD-CHECT&C A®UH-UBNKL&A ®UH-UBKNT&C.
Thanks a lot.Unfortunately, the zebra printer I have cannot print beyond 4 Inch width. I used to get this error initially but when I have created a custom device type which was copied from lb_zeb2 and included the page format ZBGLBL which is the page size of 2 1/2 X 4 1/2 I started getting this new error.
I am not sure, if this is the right way to handle this. Also do we need do some special coding using ZPL4 if yes where and what are those commands
Thanks
Venkat -
Cannot print Chinese character in postscript 11iAS
We are using HRMS 11.5.10AS.
We want to print the report in postscript. However, some chinese character cannot be print correctly. ( it's right in TXT )
Anyone know how to solve it?chulongjiang,
i solve the problem with your advice, thanks lot!
Regards,
Alan 24/11/2005
Maybe you are looking for
-
Issue wth Microphone iPad 2 3G
Hello everyone, Today I have realized the microphone in my iPad 2 3G is not recording sound anymore. I have read the issue is presented in this model What should I do ? This iPad was purchased 2 year ago Would Apple recognize the issue and repair it
-
How do i stop quicktime playing videos
How do I reach a live person
-
User Exit to add custom field in Component Screen
Hi Friends, I searched alot but could find exit to add custom field or tab in material component detail screen for SAP 4.7. Please let me know if there is any exit or workaround possible. Thanks, Raj
-
Is there any standard report available to view the loan payments for the FY
Hi Experts... Is there any standard report to view the loan payments taken by the employees in a paticular financial year. We are entering the details of loans through 0045 and through a subtype. When im using tcode pcoo_m99_cwtr... thet are showing
-
How to generate schema DDL from SQLD 1.5?
There used to be "Tools -> Export DDL" to export DDLs for multiple objects of a schema. It is not seen in my SQLD 1.5 (Version 1.5.0.53). Has it got lost / navigation changed? - Jayant