Vietnamese Locale support on solaris 8 Rel Oct.2000

Does Solaris8 ( Rel. Oct.2000 ) Supports Vietnamese Locale like Japanese & chinese , etc..? If yes what are the Input Methods & Fonts required for working in Vietnamese Locale Environment. Please give me information.

Actually the Solaris 8 HCL was wrong the TNT driver never made it
into the Beta update. The release has the driver in it and should
be available soon.
---Bob

Similar Messages

HTTP Server is not currently supported with Solaris 10

I am having a problem to start the HTTP Server on Solaris 10 (I am installing HTTP Server as part of HTMLDB installation on Solaris 10).
I had a problem to install it at first, however I've found on 'AskTom' that unsetting ORA_NLS33 helps and it did. Now I can't start the HTTP server and I've found on metalink that 'HTTP Server is not currently supported with Solaris 10, this is targeted for Q2CY05'.
Has this been fixed yet?
Thank you for your time.
DanielD

Hi james,
I have checked the log file but i am unable to find what to do next.
I am giving the small piece of content of the log file. The following messages are repeating again and again...
Log content:-
07/09/23 17:20:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:26 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:30 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:40 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:44 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:42 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:28:57 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:29:01 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd

Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server

Dear All,
Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server.
I tried it in windows 2003 server but i couldn't. Atlease tell me wheather it support windows 2000 adv. server. This is my first dba job.
Under Doc ID: 66397.1 saying Oracle 8.1.6 Not Support Windows NT Server 4.0 Terminal Server Edition.
Under Doc ID: 77627.1 saying Oracle 8.1.6 Supports Windows 2000 Support.
Please help me out urgently.

Since you have access to Metalink, you could be looking at the Certify tab to find this information. But, the answer is that 8.1.6 is no longer supported by Oracle. However, you should be able to install it on Win 2000 advanced server. You just can't get any support for it.
The earliest version of db supported on Win 2003 was either 9.0 or 9.2, but 9.0 is desupported now as well.

Portal Server support on Solaris/Intel Architecture

Hi Gurus,
Is iPlanet portal supported on Solaris on Intel architecture? Any of you have this kind of setup and experienced any problem? or was it smooth sailing? or is there some particular version of Solaris OS that has to be used..etc.
Thanks
Ashok

The short answer is No. The current version of Portal Servers both 3.0 and 6.0 are supported only in Solaris / Sparc arch.

Sapjco support for Solaris 10 x86 and more...

Hi,
Does SAP offer a SAPJCO version that supports:
1-Solaris 10 using a x86 64-bit CPU?
2-Solaris 10 using a SPARC 64-bit CPU?
3-Linux 64-bit?
4-MsWindows 2003 64-bit?
PS: I am asking does questions, because I don't seem to have access to the SAPJCO download page.
Best regards.

Hi
Could you please refer this similar [Thread|https://websmp209.sap-ag.de/connectors] .
Regards,
S.Manu

OpenSSH 4.4p1 packages with PAM support for Solaris 9, 10

As mentioned in a previous post* , I've compiled OpenSSH packages with PAM support for Solaris 9 and 10. They've since been updated to version 4.4p1, and are compiled against a static zlib (1.2.3) and OpenSSL (0.9.8c). You can find them here:
http://firewallworks.com/downloads/unsupported/Solaris-sparc/
Regards,
Greg
* http://forum.sun.com/jive/thread.jspa?threadID=103378&tstart=105

Yes, zlib 1.2.3 is a requirement. In facts, zlib mentions a 2005 vulnerability fix but I found no matching patch in sunsolve. See
http://www.kb.cert.org/vuls/id/JGEI-6E7RC3
I have been wandering whether to replace the official zlib. Linking statically is probably a better idea. Thanks

CDE Support on Solaris 8

Hi all !
I have just installed Solaris 8 for Intel on a laptop. After lots of hassel with the video-driver, I got this working by installing Accelerated-X Laptop Display Server. But here it comes .... However,
Xwindows functions OK, whereas CDE fails. Has anyone had similar experience, and more importantly has anyone resolved the problem ?

I am sorry but Workshop 4.2 is supported on Solaris 7 and 8. I don't
see why it shouldn't be. If your statement means that Solaris 7
distribution doesn't come along with Workshop 4.2, then ignore my
statement, I am not sure of that. But Workshop 4.2 will work on both
Solaris 7 and Solaris 8.
Rajag.

JNI FC1063 HBA support on solaris 10

Hi ,
I have upgraded Solaris 9 to Solaris 10 using Live upgrade.Server is SUN fire V880 and the HBA is JNI FC1063.
After upgrading ,I am not able to see the FC LUNS .
Does The JNI Fc1063 HBA has support on Solaris 10.
Thanks

I would beg to differ on this response. This is not a service call and the storage vendor is not responsible for making decisions on what the customer is allowed or not allowed to use.
EG, I have a Sun StorEdge 9990 (actually a HDS USP 1100 and not the 9990 Lightning series which is on the web site) and I made the call to put the Fibre Channel HBA's of my choice into my systems and I also chose the Cisco 9509 switches. Both HDS and Cisco put out documentation regarding compatibility of the HBA's.
So, I would suggest RPS check out the Brocade website or sales people and ask them if they recommend anything.
http://www.brocade.com/products/pdf/Fabric_Aware_Compatibility_Matrix-060521.pdf
states that the option X6768A is supported for Solaris 10.
Sun 9980 will work on most of the HBA's available in the system handbook.
The could be either the rebadged Qlobic or JNI HBA's. You could even use Emulux if you are that way inclined.
My systems are full of dual channel HBA's such as SG-XPCI2FC-QF2.
You should also be aware that the 1280 has only one 66 MHz PCI slot. You can upgrade the I/O boat to all 66 MHz slots if you are after good throughput. The upgrade will also give the opportunity to use the 4 Gb HBA if you can find a system to use them on.
Stephen

Level of ACPI support with Solaris 10?

What is the current level of ACPI support with Solaris 10 x86? I have been searching forums and Sun documentation and I have not found an official answer to this question from Sun. I have seen posts in which people state what they "think" they know or they know how something worked with "their" system but nothing official from Sun. I assume there is some support for ACPI because the eeprom command can be used with the acpi-user-options. Can I just enable ACPI support on my motherboard and let Solaris 10 Update 3 do the rest? Thanks for the help?

I found this site that seams to answer this question.
http://blogs.oracle.com/jsavit/entry/ours_goes_to_11_features

HBA support for solaris 10

Hi All
I need to know which HBA card will support solaris 10.we have sunfire 1280 server, brocade silkworm 12000 and hitachi 9980
Regards
RPS

I would beg to differ on this response. This is not a service call and the storage vendor is not responsible for making decisions on what the customer is allowed or not allowed to use.
EG, I have a Sun StorEdge 9990 (actually a HDS USP 1100 and not the 9990 Lightning series which is on the web site) and I made the call to put the Fibre Channel HBA's of my choice into my systems and I also chose the Cisco 9509 switches. Both HDS and Cisco put out documentation regarding compatibility of the HBA's.
So, I would suggest RPS check out the Brocade website or sales people and ask them if they recommend anything.
http://www.brocade.com/products/pdf/Fabric_Aware_Compatibility_Matrix-060521.pdf
states that the option X6768A is supported for Solaris 10.
Sun 9980 will work on most of the HBA's available in the system handbook.
The could be either the rebadged Qlobic or JNI HBA's. You could even use Emulux if you are that way inclined.
My systems are full of dual channel HBA's such as SG-XPCI2FC-QF2.
You should also be aware that the 1280 has only one 66 MHz PCI slot. You can upgrade the I/O boat to all 66 MHz slots if you are after good throughput. The upgrade will also give the opportunity to use the 4 Gb HBA if you can find a system to use them on.
Stephen

Dmenu error: No locale support

My dmenu recently started to spit out this error:
$ echo -e "foo\nbar" | dmenu
no locale support
According to wiki:dmenu this is because of an invalid encoding in $LANG. However, I can't figure out whether $LANG should be set to "en_DK.UTF-8" (as it is now) or "en_DK.utf8" in /etc/locale.conf. Wiki:locale says it should be "en_DK.UTF-8", but that leads to the dmenu-error shown above.
Here is my current "setup":
$ cat /etc/locale.conf
LANG=en_DK.UTF-8
LOCALE=en_DK.UTF-8
$ echo $LANG
LANG=en_DK.UTF-8
$ grep -v "#" /etc/locale.gen
da_DK.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_GB.UTF-8 UTF-8
$ locale -a
C
da_DK.utf8
en_DK.utf8
en_GB.utf8
POSIX
EDIT: This guy seems to have the same problem.
Last edited by graph (2013-05-24 19:59:21)

UnsolvedCypher wrote:Does the solution in the other thread work for you?
Sort of. If I change $LANG to "en_GB.utf8" it works. However, if I change to "en_DK.utf8" it doesn't.
"da_DK.utf8" also works, but it makes Pacman throw out errors in Danish, which is not preffered at all.
However, I'm curious to have this doesn't work with "en_DK.utf8" specifically?
EDIT: Dunst is also complaining about "no locale support"
Last edited by graph (2013-05-25 07:05:21)

OpenInstaller is only supported on Solaris 9 or later error

I was trying to install java 1.6 version on an Solaris machine During install it failed with the following error message "openInstaller is only supported on Solaris 9 or later" since the Solaris version on this machine is 5.8
As per the sun download page, it was mentioned like supported version is Solaris 8,9 and 10.
http://www.java.com/en/download/help/5000010600.xml
My Solaris machine version is 5.8
./java_ee_sdk-6u1-jdk-solaris-sparc.sh
extracted: install/metadata/view/jwsdp_5.png
extracted: install/metadata/view/jwsdp_6.png
extracted: install/metadata/view/jwsdp_7.png
extracted: install/metadata/view/updatetool.xml
openInstaller is only supported on Solaris 9 or later
Could you please let me know what is the issue and how to resolve this issue.
Thanks,
Ricks

bumping this up in hopes of an answer....
it appears that the jar installer works fine, the problem is with .bin installers only.....
in install docs found proposed solution of "use df compatible with used posix" - that must be a joke, right ??
we're supposed to replace df that comes with OS with some version that works with posix used by the installer ?? Really ?@?@?

MP3 Support in Solaris

Hi
I'm starting a new project that requires MP3 support. What is the support of MP3 using JMX in Windows and Solaris with the Enhancement Pack. Can I decode it? Can I encode it?

I'm starting a new project that requires MP3 support.
What is the support of MP3 using JMX in Windows and
Solaris with the Enhancement Pack. Can I decode it?
Can I encode it?I am not entirely sure, but I have been working on some
webstart examples of launching the Performance Pack
versions of JM Studio(1) & JMF Registry(2).
(1) http://www.javasaver.com/testjs/jmf/#test3
(2) http://www.javasaver.com/testjs/jmf/#test4
I expect (OK hope) the second can tell you what
it supports for Solaris - particularly for the mime-types,
e.g. for the Windows PP, it looks like this..
http://www.javasaver.com/testjs/jmf/#mime

PAM Support fpr Solaris SGD 4.3

Hi,
where can I find more informations howw to integrate PAM Support under Solaris SGD 4.3
I read in the relase notes:
Support for PAM for UNIX User Authentication
Secure Global Desktop now supports PAM (Pluggable Authentication Modules) for UNIX user authentication. The change affects the following login authorities:
* ENS
* UNIX User
* UNIX Group
Secure Global Desktop uses PAM for user authentication, account operations and password operations.
When you install Secure Global Desktop on Linux platforms, Setup automatically creates PAM configuration entries for Secure Global Desktop by copying the current configuration for the passwd program and creating the /etc/pam.d/tarantella file. On Solaris OS platforms, you can add a new entry for Secure Global Desktop (tarantella) in the /etc/pam.conf file if required.
Using PAM gives Secure Global Desktop Administrators more flexibility and control over UNIX user authentication, for example by adding new login tests, account limits, or valid password checks.
But how this should be done, I could not find out....
Regards
Lukas

Hi,
Yes I now that. Pam is allways configured via Operating System. But where can I find some documentation how to configure pam to allow unix authentication against the ssgd.
I do not want to create a unix user for each sgd user (ldap) which is using a AS 400 connection or a classroom object. So I that this could be done via PAM Module for ssgd
Thanks for further advise.

PS Store error, local support team refuses to help.

Hello everyone, Before I begin, please understand that I am not here to complain. I am not an upset customer on a rant. And I am not new to the service and the way Sony/PlayStation handle things. I simply want to report a few things 1) An error on PlayStation Store.
2) The inability of my local support team.
3) A solution to my problem. Now, on with it... On the 23rd of July I made a avatar purchase on the PlayStation Store using my PS3. I bought the avatar Deception IV TNP - Avatar Laegrinna. Here's a shot of my download list after the purchase. As you can see, Laegrinna avatar is on my download list. So I download it. However, when I got to select it on my avatar list, instead of Laegrinna I get the Allura avatar. Which is the wrong avatar. Now, since my account is based in Portugal, and I used the Portuguese Store, I contacted the Portuguese support team.After proving the needed information, I was asked to provide screenshots for further evidence. So, I did.
The next email I was asked to select the appropriated field on my avatar list and be sure to scroll down the list and look for it. I did, and replied back saying that it still not there. Now, up until this point I am a reasonable person. I understand why so many questions and the need for verification. They must first verify that what I'm saying is true. Fair enough. However, this is where I lose faith in my fellow country people.
Up until now I've been exchanging emails with one person. But now a second person replies back to me with detailed instructions on how to select an avatar for my account. Even though I already know how to do that, and had this person read the previous email chain they would have come to that conclusion, since I provided a screenshot of me accessing the avatar menu. This sent me straight back to the start. I feel like I've made no progress what so ever. Because now I had to explain the situation all over again to someone who's clueless of the entire situation.
I'm taking this to the English forums where hopefully there's more common sense.So here's the thing. I just want people to take responsibility over this error on the PlayStation Store. I was given the wrong item. I did not received what I paid for. I either want a refund, or the error fixed so that when I download it, I get what I paid for. It's not about the money, it's about principle. This was only a few cents. But what if it was an expensive special edition full game and the store instead gives the wrong game? I would obviously contact the support team, but for what? So that I can be told that there's nothing wrong and that I don't know how to download the correct game? I would be most grateful if someone could look into this situation. I am willing to provide further details if needed upon establishing contact. Thank you for your time. [UPDATE] After replying to the second person and explaining myself again, I've received a generic reply saying that my email has been directed to a different sector to deal with it.

DEKOWOLF wrote:
Appreciate the feedback! I'm afraid email is the only way I can contact the support team right now. I'm not living in Portugal. Thing is, I'm not even mad. Like I said, it's a simple matter of principle.Getting my problem fixed is the lower priority for me. What I want is someone higher up (like a Sony Europe HR department) to address the support team and tell them how to run their ship. Oh i see. Yeah I get what you mean.

Vietnamese Locale support on solaris 8 Rel Oct.2000

Similar Messages

Maybe you are looking for