View 2 v tracks simultaneously

Relatively new user of FCE 1.0... So, is there any way to view 2 video tracks side by side? The closest I've come is to use compositing and make one of the tracks a small "picture in picture" on top of the other. But then I'm blocking what is underneath the superimposed picture, and they're different sizes. I want to view two same-size video tracks running simultaneously, side by side, in windows that are the same size. Obvious, right? Beats me... Thanks for any ideas!

http://discussions.apple.com/thread.jspa?threadID=3832
54&tstart=0
Many thanks for this!

Similar Messages

Viewing multiple viseo tracks simultaneously

Can this be done? Say, to view a video track 1 and video track 2 side by side in separate viewers,(or a viewer partitioned) Possibly even viewing maybe for tracks at once?

product wrote:
Can this be done? Say, to view a video track 1 and video track 2 side by side in separate viewers,(or a viewer partitioned) Possibly even viewing maybe for tracks at once?
do you mean "four" instead of "for?" You're asking because you do not now have FCP? Check the marketing pages for FCP, Apple has done a marvelous job of detailing the features and capabilities.
If you already have FCP, you need to spend a few days deep inside the manual, locating as much free online training as you can tolerate, and experimenting for many hours.
The mutlicam funciton in FCP is cool and fun but the interface is absurdly complicated and requires several obscure and nonintuitive settings. Patience. You will NOT get it the first few times.
bogiesan

Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously?

Hi Apple community,
This is my first go at this so be kind,
My question concerns launchpad. Coming from Snow Leopard I had been using spaces. I like to keep certain bundles of programs on separate desktops, for example all word processing related tasks in one place. I have set up the equivalent on Yosemite.
My problem is concerns the loss of exposé. Now I know when you swipe into launch pad you get a very similar effect but the issue I am having concerns the "zoom out" effect when you swipe into launchpad. With exposé all open apps/pages etc would be fully exposed - in my case several (sometimes as many as 9 word documents). What I am running into is when I do this in / into launch pad the "pile" of docs is exposed but they are still overlapping so I can't get a good look at which is which and visually identify where I want to navigate to.
My question is this; Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously? If so, instructions on how to do so would be greatly appreciated. Any alternative suggestions to doing this outside of launchpad are also welcome. If there is an exposé app for example, I would be quite willing to go that route.
My main concern is being able to quickly (ie a touchpad gesture) expand all the open pages so I can bounce between them.
Much thanks from a loyal Apple friend.

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

When attempting to view the date track history for one employee, errors out

Hi All
When I attempt to view the date track history for one employee, it gives errors.
To get the details, the navigation is :
1. Search for employee xxxxxx
2. click on Assignment button
3. click on Date Track History.
4. Receive error APP-DT-52554.
5. Click OK on error message
6. click on Full History button.
7. Receive error APP-PAY-06153
What could be the problem and how to solve this?
Regards
Rahman

Sounds as if there is an inconsistency with the date tracked records. Can you check the records through TOAD or SQL Plus?
Have alook at MetaLInk article 343070.1 which refers to the second error message.
Regards
Tim

How to zoom out and view an entire track in the window

There's got to be a way to zoom out so an entire track can viewed at once so that segments of the track can be shifted around. I have a track that is about 50 minutes long with several segments in it. I want to shift the segments around. Right now I can only view about a minute of the track at a time and have to click on the segment then move the cursor either left or right and wait for Garageband to scroll to the time where I want to put it. Isn't there a way to just zoom out and view the entire track and then shift segments around without all the scrolling? Does that make sense?

Christoph Drösser wrote:
Hm ... mine zooms out to more than an hour?
interesting!
I opened GB4 and it maxed out at 4 minutes. then i opened GB6 and it maxed out at 15 minutes. then i opened another project in GB 6 and it maxed out at 35 minutes.
so there must be something else going on here, perhaps like how time sigs affected length in the older versions?

How can I record 2 tracks simultaneously in GarageBand for iOS?

I am trying to record 2 tracks at the same time, one, a line in for my guitar and the other a vocal mic. I am using an Alesis i/o Dock with my iPad Air 2, everything is updated, and everything is plugged in correctly. When I select either track from the multitrack screen, I can see that both work appropriately. However, when I hit the record button, the screen goes from the multitrack view to the track that is 'highlighted' and the record process goes from there. So if the 'amp' (guitar) track is highlighted, the app take me from the view with both on it to the 'guitar amp' selection, showing the head that I selected. Now, in the past, I have recorded 2 tracks at the same time. I still have the original recording showing both tracks and their settings. Even when I try to match the setting (both were on Left Channel, for example) it doesn't work. On my recent attempt to record (the one this question is about) I put the mic track on Right Channel and the line in on Left Channel, and vice versa. I tried putting them both on the same thinking that maybe that's what I did before because the app might not be able to do both Channels at the same time. I tried using the Mic track in stereo and the Line In on Left and tried it on Right; nothing. Has GarageBand taken this feature out on iOS? I do see if I had a Mac there is an 'Enable Multirack Recording' box to check, but I don't see anything like that for iOS... Can anyone help??

in one the YouTube Tutorials, it is not possible in iOS. but hopefully in the later version it should be.

How to view ALL selected tracks in iTunes

Simple question, I hope, but I've got more tracks on my iTunes than I can fit into my iPhone and I would like to be able to see how much memory my selected tracks take up, in total, not just by artist, before I try to sync.
Is there anyway of viewing all selected tracks in iTunes?

Create a new playlist using the command File > New Playlist. Drag the selected tracks into it. Open the playlist and look at the bottom to see the number of tracks, total size, and playing time.

Not able to view the usage tracking dashboard in production

Hi ,
I tried to incorporate the usage tracking of the dashboard in my development which is working fine ,but the same when i moved to production .I was not able to view the usage tracking dashboard itself .
Can someone pls help me out to solve the issue.
Thanks in advance.

Do you mean the actual dashboard is missing or can you not see data in it?

Can I record multiple tracks simultaneously in v. 1.1?

Hey, I found some instructions online about how to record multiple tracks simultaneously in version 3, but I can't figure out how to do it in the old version I have, 1.1. Any help is appreciated. I'm crossing my fingers and hoping this feature wasn't implemented later. I have a two-mic setup for podcasts, and need to record both on diff. tracks.

Multi-track recording was added in v2
From STP 2 Manual - New Features:
Multitrack Recording
With Soundtrack Pro 2, you can record across multiple tracks in the Timeline. (This is limited only by your hardware setup.)
So, not available in v1
Have you tried Garageband?

Recording 2 tracks simultaneously?????

I'm having trouble recording 2 tracks simultaneously in Logic Pro 7. I'm recording a podcast and want to record 2 separate mic's, one for each host.
I have the Lexicon Lambda audio recording interface.
For some reason i cant figure out how to select "Input 2" for my "Track 2". I guess that's really all i need to know how to do........ select "Input 2". I've seached throughout the program and clicked everywhere and just cant seem to figure out how to select it. I click on the bar that says "Input 1", but nothing happens.
Even if i do figure out how to select "Input 2" (which i think i did one night), will i be able to record 2 tracks at once, using 2 different inputs?
This is driving me nuts......... it seems so easy, but i just cant figure it out!!!
Thank you!! Love you!!!!!!

So I've made progress..... In the menu of the Audio window on the left where it says "Channel: Track 2", I click on the little arrows and I am able to select "Input 2". But then the window underneath the Audio window (the window with the level meter) changes a bit.
I am able to highlight the record button on both tracks 1 and 2, and i'm showing separate volume readings for each...... so everything is good so far.
The problem comes when i actually hit record. I hit record, and the cursor runs, but nothing gets recorded. No waveforms pop up. I've figured that this only happens when i have "Input 2" selected.
Track 1 still will record, but only if it's record button is highlighted by itself.
This is driving me insane!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have noticed that in any track that i have "Input 2" selected, the little snowflake button dissapears, as well. This snowflake button is next to the mute and record buttons in the track window. I dont even know what this snowflake button does. Is it a "solo" button? Button. Button. Button.
Does anybody know what is going on??
Do I need to select some kind of "Stereo" setting or something in my Preferences?
Please help!!!!!!!!!!!!!!!

Recording audio and software tracks simultaneously ?

recording audio and software tracks simultaneously ?
I am recording a software piano instrument track and a vocal audio track in logic Pro X. Problem#1
When the replace"X" button is selected,
when recording audio and a software track simultaneously,
I can hear the previously recorded instrument track that I am recording over.
(very distracting)
When recording a software instrument track alone (without simultaneously recording an audio track)
The software/midi instrument track will record over and erase existing data and I will not hear the previously recorded track. (as it is suppose to do) Problem #2
Both tracks are armed ready to record.
If the software instrument track is not highlighted, it will not record.
The audio track will record regardless of whether it is highlighted or not. Craig C.
Calistro Music

Click record on the MIDI/Inst track.
Shift click record on the audio track.
Hit record

Watching 2 video tracks simultaneously

Working on a video using FCP 3.02 on G4 with 10.5.6 OSX. Would like to be able to view video track 1 in the viewer and video track 2 in the canvas at the same time. Any ideas? Thanks!

You can view both in the canvas, just not full size. Go into the motion tab and make the size of each, say 60%. Then move one into the top left corner and one into the lower right.
You might also read up on the Gang Playhead Sync option to see if this is similar to what you want. I've never used it, but it is in the manual.

Recording software tracks simultaneously in 10.3 is not working for me

How do I record software tracks simultaneously on 10.0.3? When I press the record button on each software instrument track and press record on the main, it only records the highlighted track even though I hear both instruments.

A few dozen have looked so I may not be alone. Yet no one has offered a suggestion? I am still at 10.2.2.214 and iPhone on iOS 4.2.1. iTunes takes very long time to open 3+ minutes and does not respond when device connected then fails to see any device connnected. Will Apple address or fail to fiind this issue? two years ago a few months passed and few upgrades then iPhone was recognized. All worked fine until last month with10.2 update. What are my options here? Please I have gone through ideas presented here for amonth, get one or two to work for a day and then fail after that. I would like to get stable operation of iTnes and then I'll leave things alone. I really do find the 3GS a good buy right now but, with no iTunes why buy it?

How can I record multiple tracks simultaneously?

How can I record multiple tracks simultaneously? Or rather what hardware do I need to do this? I currently run guitars and mic into a PA and then the PA into Garageband. But this is just one track. I want to record the guitar as one track while simultaneously recording vocals as another track. What hardware do you suggest - keeping it affordable?

if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
if you want better quality, any two channel interface will work:
http://www.bulletsandbones.com/GB/Interfaces.html

Can a Macbook Pro Dualcore 2,4 ghz handle 8 track simultaneous recording in Garageband?

Can a Macbook Pro Dualcore 2,4 ghz handle 8 track simultaneous recording in Garageband?
I am looking to buy a used Macbook Pro Medio 2010, with a 2,4 Intel Core Duo, 6 GB Ram and a 120 Gb SSD harddrive.
I am mostly going to be recording drums, with 8 individual channels + midi (More likely only 6 channels at a time though)
Is this powerfull enough to record 8 tracks at the same time without any significant hicups?
- Ken

I was floored on how good the ipad did. The DAW I was using has a cpu meter and I was barely pushing it.
Off topic: Have you seen this, isteveus?
Guitar solo on an iPad with Garageband https://discussions.apple.com/message/24899232#24899232

View 2 v tracks simultaneously

Similar Messages

Maybe you are looking for