View all entries from a single calendar

Hi,
I have multiple calenders in my iCal. E.g. for all subscription renewals I have a calendar. Is there a way to get an overview of only the events from a single calendar?
Thx.

In the list of calendars in the top left corner of the iCal window turn off (uncheck) all except the one you want.
AK

Similar Messages

TS3274 All entries from my Calendar have disappeared from before 8 August 2013. I cannot restore them. Help!

All entries from my Calendar from before 8 August have disappeared. Very frustrating as this is a record for the year. How can I restore them? I tried to re-enter for 3 August and when I clicked Done, nothing appeared.

Settings>Mail, Contacts & Calendars>Sync>All Evens

Delete all entries from the following tables - Follow-up Activities (oracle)

Hello,
I performed a homogeneous system copy of our development BW system with the database (oracle 11.2.0.3) from the BW production system!
I already start the oracle database and the SAP system in the target system/server (development BW system) and I´m doing some follow-up activities. One of this activities is (at the system copy guide 6.2.3.2 Activities at Database Level) is to delete all entries from the following tables:
DBSTATHORA, DBSTAIHORA, DBSTATIORA, DBSTATTORA
I tried to delete them using SQL Plus:
sqlplus /nolog
SQL> connect /as sysdba
SQL> delete from DBSTATTORA;
delete from DBSTATTORA
ERROR at line 1:
ORA-00942: table or view does not exist
... and it show me that error message.
This is strange because when I go to transaction SE14 and check the DBSTATTORA I see that table exist and contain a lot of entries!
Why this is happened in SQL Plus!? I´m running the correct SQL statement for doing this type of task or not?
How can I delete the entries of that tables? Can I do that using the transaction SE14?
Can you help me please?
Thank you,
samid raif

Hello
sqlplus /nolog
SQL> connect /as sysdba
SQL> delete from DBSTATTORA;
delete from DBSTATTORA
ERROR at line 1:
ORA-00942: table or view does not exist
It doesn't surprise me as you are not mentioning the schema name here. Instead it should be
delete from SAPSR3.DBSTATTORA;
Assuming the schema owner is SAPSR3. if the owner is different then replace that with the correct one.
Regards
RB

How can I view all photos from a specific year?

How can I view all photos taken in one calendar year like 2010? Is there a way to filter this way?

Yes, create a smart album or a search with a "Date" rule or a Calendar rule.
For example: New > Smart Album
Add Rule: Date
Capture year is 2010.
or: Add Rule: Calendar
and click-step the year back to 2010:
In the Calendar it is a bit cumbersom to select a whole year, because it will only show 3 month at once. Select the first day and then scroll to to the end oft the year.

2 for all entries in a single select

Hi all,
I need to do 2 for all entries in a single select statement.Is there a way out?

Hi,
No you cant use two FOR ALL ENTRIES at a same time.
Use either of following:-
1. Only JOINS
2. One JOIN and one FOR ALL ENTRIES.
3. Use multiple queries to fill multiple internal table and then read these internal table to form a final internal table.
Hope this solves your problem.
Regards,
Tarun

Hello, can i taken over the entries from an old calendar to a new calendar? example entrie from 2013 to 2015?

hello, can i taken over the entries from an old calendar to a new calendar? example entrie from 2013 to 2015?

Duplicate the calendar, go to the Calendar Settings and change the year to what you want. Text entries to individual dates will remain but any photos added to a specific date will not. Photos added to the photo page for each month will remain so you will need to delete them from the page and calendar if you want new ones.

Retrieving ALL values from a single restricted user property

How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");

Well, the code you've got will retrieve the single value of the property
for the current user. You're getting the default value because the
current user doesn't have Locations property set, so the ProfileWrapper
returns the default value from the property set.
I assume you want to get the list of available values that you entered
into the .usr file in Workshop. If so, I've attached a
SetColorController.jpf, index.jsp, and GeneralInfo.usr (put in
META-INF/data/userprofiles) I wrote for an example that does just this.
It uses the PropertySetManagerControl to retrieve the restricted values
for a property, and the jsp uses data-binding to create a list from that
pageflow method.
For a just-jsps solution, you can also use the
<ps:getRestrictedPropertyValues/> tag. I've attached a setcolor-tags.jsp
that does the same thing.
Greg
Dirk wrote:
How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");
[att1.html]
package users.setcolor;
import com.bea.p13n.controls.exceptions.P13nControlException;
import com.bea.p13n.property.PropertyDefinition;
import com.bea.p13n.property.PropertySet;
import com.bea.p13n.usermgmt.profile.ProfileWrapper;
import com.bea.wlw.netui.pageflow.FormData;
import com.bea.wlw.netui.pageflow.Forward;
import com.bea.wlw.netui.pageflow.PageFlowController;
import java.util.Collection;
import java.util.Iterator;
* @jpf:controller
* @jpf:view-properties view-properties::
* 
* <view-properties>
* <pageflow-object id="pageflow:/users/setcolor/SetColorController.jpf"/>
* <pageflow-object id="action:begin.do">
* <property value="80" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="action:setColor.do#users.setcolor.SetColorController.ColorFormBean">
* <property value="240" name="x"/>
* <property value="220" name="y"/>
* </pageflow-object>
* <pageflow-object id="action-call:@page:index.jsp@#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="240,240,240,240" name="elbowsX"/>
* <property value="144,160,160,176" name="elbowsY"/>
* <property value="South_1" name="fromPort"/>
* <property value="North_1" name="toPort"/>
* </pageflow-object>
* <pageflow-object id="page:index.jsp">
* <property value="240" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#index.jsp#@action:begin.do@">
* <property value="116,160,160,204" name="elbowsX"/>
* <property value="92,92,92,92" name="elbowsY"/>
* <property value="East_1" name="fromPort"/>
* <property value="West_1" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#begin.do#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="204,160,160,116" name="elbowsX"/>
* <property value="201,201,103,103" name="elbowsY"/>
* <property value="West_0" name="fromPort"/>
* <property value="East_2" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.ejb.property.PropertySetManager#propSetMgr">
* <property value="31" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.profile.UserProfileControl#profileControl">
* <property value="37" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="formbeanprop:users.setcolor.SetColorController.ColorFormBean#color#java.lang.String"/>
* <pageflow-object id="formbean:users.setcolor.SetColorController.ColorFormBean"/>
* </view-properties>
public class SetColorController extends PageFlowController
* @common:control
private com.bea.p13n.controls.ejb.property.PropertySetManager propSetMgr;
* @common:control
private com.bea.p13n.controls.profile.UserProfileControl profileControl;
/** Cached possible colors from the User Profile Property Set definition.
private String[] possibleColors = null;
/** Get the possible colors, based upon the User Profile Property Set.
public String[] getPossibleColors()
if (possibleColors != null)
return possibleColors;
try
PropertySet ps = propSetMgr.getPropertySet("USER", "GeneralInfo");
PropertyDefinition pd = ps.getPropertyDefinition("FavoriteColor");
Collection l = pd.getRestrictedValues();
String[] s = new String[l.size()];
Iterator it = l.iterator();
for (int i = 0; it.hasNext(); i++)
s[i] = it.next().toString();
possibleColors = s;
catch (P13nControlException ex)
ex.printStackTrace();
possibleColors = new String[0];
return possibleColors;
/** Get the user's favorite color from their profile.
public String getUsersColor()
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
return profileControl.getProperty(profile, "GeneralInfo", "FavoriteColor").toString();
catch (P13nControlException ex)
ex.printStackTrace();
return null;
// Uncomment this declaration to access Global.app.
// protected global.Global globalApp;
// For an example of page flow exception handling see the example "catch" and "exception-handler"
// annotations in {project}/WEB-INF/src/global/Global.app
* This method represents the point of entry into the pageflow
* @jpf:action
* @jpf:forward name="success" path="index.jsp"
protected Forward begin()
return new Forward("success");
* @jpf:action
* @jpf:forward name="success" path="begin.do"
protected Forward setColor(ColorFormBean form)
// set the color in the user's profile
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
profileControl.setProperty(profile, "GeneralInfo", "FavoriteColor", form.getColor());
catch (P13nControlException ex)
ex.printStackTrace();
return new Forward("success");
* FormData get and set methods may be overwritten by the Form Bean editor.
public static class ColorFormBean extends FormData
private String color;
public void setColor(String color)
this.color = color;
public String getColor()
return this.color;
[GeneralInfo.usr]
[att1.html]

Getting All Entries from a cache

Hi Folks,
     Just a small interesting observation. In an attempt to get back all the data from my partitioned cache I tried the following approaches:
     //EntrySet
     NamedCache cache = NamedCache.getCache("MyCache");
     Iterator<Entry<MyKeyObj, MyObj>> iter = cache.entrySet().iterator();
     //iterator over objects and get values
     //KeySet & getAll
     NamedCache cache = NamedCache.getCache("MyCache");
     Map results = cache.getAll(cache.keySet());
     Iterator<Entry<MyKeyObj, MyObj>> iter = results.iterator();
     //iterate over objects and get values
     Retrieving ~47k objects from 4 nodes takes 21 seconds using the entryset approach and 10 seconds for the keyset/getal approach.
     does that sound right to you? That implies that the entryset iterator is lazy loaded using get(key) for each entry.
     Regards,
     Max

Hi Gene,
     I actually posted the question, because we are currently performance-tuning our application, and there are scenarios where (due to having a large amount of badly organized legacy code with the bottom layers ported to Coherence) there are lots of invocations getting all the entries from some caches, sometimes even hundreds of times during the processing of a HTTP request.
     In some cases (typically with caches having a low cache-size) we found, that the entrySet-AlwaysFilter solution was way faster than the keyset-getall solution, which was about as fast as the solution iterating over the cache (new HashMap(cache)).
     I just wanted to ask if there are some rules of thumb on how long is it efficient to use the AlwaysFilter on distributed caches, and where it starts to be better to use the keyset-getall approach (from a naive test-case keyset-getall seemed to be better upwards from a couple-of-thousand entries).
     Also, as we are considering to move some of the caches (static data mostly, with usually less than 1000 entries, sometimes even as few as a dozen entries in a named cache, and in very few cases as many as 40000 entries) to a replicated topology, that is why I asked about the effect of using replicated caches...
     I expect the entrySet-AlwaysFilter to be slower than the iterating solution, since it effectively does the same, and also has some additional filter evaluation to be done.
     The keySet-getall will be something similar to the iterating solution, I guess.
     What is to be known about the implementation of the values() method?
     Can it be worth using in some cases? Does it give us an instant snapshot in case of replicated caches? Is it faster than the entrySet(void) in case of replicated caches?
     Thanks and best regards,
     Robert

How do I copy multiple events from a single calendar to another calendar?

I have multiple events from my "Family" calendar that I want to move. I would like to create a new calendar and move only specific events from my "Family" calendar to this new calendar. I have tried to select each event, then export, but this doesn't seem to work. It seems to export all events in the "Family" calendar, not just the ones that have been selected. Is there any way to do this aside from exporting each event one at a time and reimporting to a new calendar?

Drag them there. The volume they’re put onto needs to be formatted as Mac OS Extended.
(111592)

For all entries from 2 tables that have no common key

Hello
I have the next querry that i want to write in abap
AUFK -
>aufk-aufnr = afko- aufnr----> AFKO
AUFK---->aufk-pspel = afvc-projn -
>AFVC
AFKO-----> afko-rsnum = resb-rsnum   -
> RESB
AFVC-----> afvc-aufpl = resb-aufpl       -
> RESB
AFVC-----> afvc-vornr = resb-vornr      -
> RESB
So that i have to start with AUFK and from there i read AFKO and AFVC and with the entries from AFKO and AFVC i have to do a select on RESB.
How can i do this
select from RESB
for all entries in AFKO
   where ...
for all entries in AFVC
   where... ?
I do not have any common key between AFVC and AFKO. How can i select the correct entries from RESB?
I have to mention that i have 1-1 entries for AUFK and AFKO
                                       and 1-N entries for AUFK and AFVC
Thank you

Why don't you use afko-aufpl = afvc-aufpl ?
Regards,
Raymond

How to view all procedures from commandprompt

Hai All,
we have query select * from tab; in oracle
to view all tabels in database.Like this how can we view all procedures

The oracle specific response:
In oracle, select * from tab is actually only included for backwards compatibility (With Oracle 5)
It is better to use the view USER_TABLES
ie select * from user_tables
For stored procedures:
select * from user_procedures
More applicable to the Java world, and also database independant, check out the class java.sql.DatabaseMetaData
It has methods
getTables() and getProcedures() that should give you much the same info, just directly in java.
Cheers,
evnafets

How to create playlists on all devices from a single shared iTunes music library?

i have an iMac. my kids each have their own iMac. my wife has a PC. all three of their devices can "see" my shared iTunes library on their computer. all three of those devices can play my shared iTunes library on their computer. BUT, those other three devices cannot use the songs in my iTunes library to create their own playlists and they also can't drag playlists on my computer into their playlists.
we all share one iTunes account, so i want them to be able to do more than simply play the songs from my iTunes library on their computers; i want them to be able to put their purchases on their iPhones, iPods, etc.
help appreciated in advance.

Thanks for your time Mona.
Without modifying the Table Interface I solved my problem.
Earlier I mentioned that the exceptions were not highlighting when created in BEx. the reason is I gave negative % range -10 to -1000.
But when I changed that range as -1000 to -10, It worked fine. I created the same exceptions for all the 7 queries in BEx. So all those execeptions are automatically highlighted the result in Portal.
Cheers
POPS

Linux client not returning all entries from LDAP

We have Solaris and Linux systems using ODS 11.1.1.5.0 for login authentication. The Solaris clients see all the users with no problems, but the Linux systems are only seeing 2161 entries. I have SizeLimit set to 5000 and LookthroughLimit set to 30000 in ODS. There are VLV indexes created and Solaris is using them. When I do a getent passwd on Solaris I see this in the ODS logs :
[08/May/2012:13:32:53 -0400] conn=7 op=9133 msgId=9134 - SRCH base="ou=people,o=tsg,o=ge.com" scope=2 filter="(&(tsgunixstatus=A)(|(tsgservergroup=USERS)(tsgservergroup=nec_dev)))" attrs="cn uid uidNumber gidNumber gecos description tsgunixhomedirectory tsgunixloginshell"
[08/May/2012:13:32:53 -0400] conn=7 op=9133 msgId=9134 - SORT cn uid
[08/May/2012:13:32:53 -0400] conn=7 op=9133 msgId=9134 - VLV 0:999:0:0 1:5857 (0)
[08/May/2012:13:32:55 -0400] conn=7 op=9133 msgId=9134 - RESULT err=0 tag=101 nentries=1000 etime=2
etc, until all the entries are returned. On Linux, the same getent passwd gets this in the ODS logs :
[08/May/2012:13:12:19 -0400] conn=8189 op=1 msgId=2 - SRCH base="ou=people,o=tsg,o=ge.com" scope=2 filter="(&(objectClass=tsgposixaccount)(&(tsgunixstatus=A)(|(tsgservergroup=USERS)(tsgservergroup=nec_dev))))" attrs="uid userPassword uidNumber gidNumber cn tsglinuxhomedirectory tsglinuxloginshell gecos description objectClass"
[08/May/2012:13:12:26 -0400] conn=8189 op=1 msgId=2 - RESULT err=11 tag=101 nentries=2161 etime=7 notes=U
[08/May/2012:13:12:26 -0400] conn=8189 op=2 msgId=0 - RESULT err=80 tag=120 nentries=0 etime=0
I see that Linux adds an extra (objectClass=tsgposixaccount) to the search filter, and I added VLV indexes for linux to match what is shown in the logs for the filter. The only piece I was not sure of was the Sort for the linux VLV, I used cn uid as Solaris uses.
Is there something I need to do to get the VLV's to work with Linux clients? I do not want to set my SizeLimit or LookthroughLimit to unlimited if I do not have to. The /etc/ldap.conf for linux are pretty standard. I did add a pagesize 1000 and nss_paged_results yes but neither was any help.
Thanks,
Jay

Hi Jay,
just looking at the access log, the output of the first search (the one performed by the Solaris client) basically queries/handles the first 1000 records, whereas the second search (issued by the linux client) is getting far more results even though the search filter in theory is more restrictive (having a logical AND plus: &(objectClass=tsgposixaccount) )
Did you by chance implemented the nsslapd-search-tune parameter in the dse.ldif, activating bits 8 and 16? We don't see the 'notes=F' that is generally applied when filters are skipped, but it could be due to the fact that we already have the 'notes=U' for the unindexed search on (presumably: objectClass=tsgposixaccount). And in the end, the fact that one of the components of the filter is unindexed could lead to have in the result set also entries not matching the search filter.
HTH,
marco

Can not view all apps from app world on my playbook

I just got my playbook for Christmas. My brothers and my sister got one as well. They are seeing and downloading apps that I can not. They are all the same. I am trying see and down load Jetpack Joyride. Please help.
Solved!
Go to Solution.

The app you mentioned has a 13+ rating. That is probably why you can't see it.
Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands

HT201317 How do I view all photos from my photo stream on my PC?

When talking to an Apple employee, they stated that I had 374 photos in my photo stream but when bringing it up on my PC under pictures/photostream I can only get 114. Why can't I get the other 260 photos?

If your system meets the iCloud system requirements for photo stream (OS X 10.7.2 or later and iPhoto '11 9.2 or later or Aperture 3.4), you can sign into your iCloud account and enable photo stream, as explained here: http://www.apple.com/icloud/setup/mac.html. This will import photo stream photos added in the last 30 days. To import ealier photos you would need to create a shared photo stream that included these photos and invite yourself, as explained here: http://help.apple.com/icloud/#mmc0cd7e99.
Another option is to save them to your camera roll (if not already there) by opening your my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac using your USB cable, as explained here: http://support.apple.com/kb/HT4083.

View all entries from a single calendar

Similar Messages

Maybe you are looking for