View and Generic datasource in a transport request

Hi All,
I have created a view and a generic datasource by using the same in R/3. But I have saved them as local objects. Can some one please guide me through to collect them in a transport request to send them across the landscape.
Many thanks in advance...
Best Regards,
Nene.
Message was edited by:
Nene BW

View: SE11 -> Goto -> Object directory entry -> Assign a transportable package
DS: RSA6 -> Transport button ...

Similar Messages

How to view the File created against the Transport Request in ASCII format

Hi all,
We have a requirement where in the file created against the Transport reauest and its content should be viewed in ASCII format.
Experts do you have answer for this.
Is thers any method to work out.
Thanks in advance.
Every usefull answers will be awarded points.*********

Hi Anji Reddy,
Thanks for your reply.
Let me clear my querry.
when we create a program in se38 and save it in a zxxxx package then it will create a transport request. The Content of TR i mean is not the Program name or the object list in the TR. The content i mean here is the abap code written in the program. which will be stored as a file in the server. when we open this file it will give the SAP format. Which i want to view in ASCII format.

Application Hierarchy in BW and Generic Datasources

Hi,
I am not able to see the updated Application Hierarchy in BW. ie with the Datasources I installed from RSA3 in the R3 system. I am successfully using then by loading them but it shows in New_Hier_root and then shows in Nodes_not_connected.
I had done the following
- in R3 - rsa5 - activated extractor,
rsa6- check extractor,
sbiw - transfer application comp hier
in BW - replicate data sources - assign - install Biz content - use it in loading
I need to create a Generic Datasource for a Y Table, again I am not able to specify an application component for the same, since it shows the unupdated applicaiton component hierarchy.
Please help
Thanks
Pranab

Dear Ravindra,
I am not able to address that issue through that.
When i go to SM31 and go to table you suggested it
- Its attributes indicate it is transportable in R3 and in BW
Kindly help the Issue has not be addressed yet .

Created Date and time of a Historical Transport Request

Hello,
Is there a way for me to find the created date and time of a Transported Request (DEV>QTY>PRD)? I mean the TR which is now realesed and transported to production system?
I will award full points to the best answer.
Thanks in advance!
---ANiL
Edited by: Anil Raparthi on Sep 11, 2008 2:09 PM

Dear Anil,
We generally follow a convention where we put the date of creation of the transport request in its description, so that we can identify the requests' based on creation date.
There has to be some table to store such creation dates but I am not aware of any
Regards,
Yogesh

BTE AND Generic Datasource

I have a standard table REGLRO i want to find the BTE so that i can create the delta for this generic datasource, can u tell me how can i create the BTE or where to find what is the BTE that captures the changes to the Table needed.
I do not have last change date in my table so no straight delta technique applicable. help me if you any other way to make the delta at datasource level.
Thanks
Regards
Soniya

Hi,
Were U able to solve this issue?
If yes please let me know ..
thanx and regards,,
Mustafa

Problem in creating a view and generating datasource

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field      Type
MANDT     CLNT
RECNO     NUMC
STATUS     CHAR
LMODF     CHAR
Table2 has Fields
Fields     Type
MANDT     CLNT
RECNO     NUMC
PHCOS     QUAN
MATNR     CHAR
EQSFS     QUAN
MEINS     UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

Hi,
I think the problem here might be due to the fact that you are using MSEG table in your views.
I see that you have used MEINS in your Table2. So for Field PHCOS give your reference table as TABLE2 and field as MEINS as MEINS is already present in your table. Please leave out MSEG from your View.
Hope this helps. Please revert in case of any issues
Regards,
Pramod

Regarding Creation of Views and Multiple Datasources.

Dear All,
I hv a COreport(Cost Center Report).the data is coming from tables of CO,FI,SD,MM.
The Tables from CO are COEP,COSP,COSS,CSKS,CRHD,CSKU,CRCO,CSKB
The tables from SD are VBRK,KNA1
The Tables from MM are EKKO,LFA1.
The table from FI are SKAT,BKPF,BSIK,BSAK.
1)Can i create a view for these tables?Can a view be called a DS.
2)With these tables i hv Multiple DS's.So can i use Multiple DS's to extract data
3)Can i use FM to extract Data?If i use FM,vll i face errors during Support?
4)Please Guide me how to create Views for these tables and How to handle Multiple Datasources.
Thanks

Noor,
Have you checked suitable business content datasources.
I think you have lot of options
FIrst You need to have a multiple data source
--> Check for suitable business content datasources
--> check whether these details are already available in BW through any means (through other standard datasources to ODS)
--> Create customized extractor finally as a last option
All these tables are atandard and nost probably you would find a standard datasource ( again multiple) I am sure for costing you have standard
Few or more standard datasources or already existing BW objexts with 1 or 2(rarely) customized extractor would do the purpose that you look for,....
Good Luck !!!
Regards
VJ

Two nodes under Transport Request for Datasources

Hi all,
I need to transport 3.x DataSource from DEV to PROD.
Using TRANSPORT CONNECTIONS I have added all required Datasources in my transport request.
In SE10 I can see 2 nodes under my transport request.
DataSource Replica
DataSource (Active Version)
All Datasources are shown in DataSource Replica but a few of them (not sure why) in DataSource (Active Version).
I wanted to know the if this is the right way to transport ???
Will it result in an error while transporting to PROD ???
Please help me in clearing my doubts.
Regards
Shalabh

Hi,
U need to transport the Data source replica as well when ever u transport ur DS for the first time.. along with the ur DS...
So make sure that u have collected IS, DS, DS replica, TR, UR, IO if any and targets.
Thanks
Assign points if this helps

Transport Request and Cross-Application techniques

Respected Members,
I want to know what is the difference between the transporting request and Cross-Application Technique( eg ALE)
Generally suppose you have made some object in development server and then a transport request will be created and through transporting to the production server same data can be transported to production server.
Same thing we do with ALE also that we can transport the data from one server to another server or from one client to another client.
THen what will be the difference between the transport objects and Cross-Application techniques.
Clear this picture by giving your valuable answers.
Thanks a Lot.
Manish

Hi Manish,
The applications transferred through Transport Requests and the data passed through ALE or EDI are completely different technologies.
The Transport requests transfer the programs and the configurations that you do within the development Server or rather the SAP system to the Production Server and then you execute them to get the desired result.
On the other hand,ALE(Application Linking and Enabling) or EDI(Electronic Data Transfer) transfers the data or rather business documents(for example vendor payments or making the payme nt through cheques) from one system to another system,i.e different Landscapes.
If suppose you want to transfer the data from one SAP system to another SAP system which are in completely different landscapes,then you use ALE and in case you transfer it from one SAP system to another Non-SAP system or vice-versa,you use EDI.
Moreover,you cannot view the coding or the configuration part in case of ALE or EDI whereas you can view the same in terms of Transport requests.
The landscape means all the clients within one SAP system.
I hope I have made it In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.clear.

Transport request for BW queries and roles.

Hi All,
we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role. Both the roles and queries does not exist and will be created in Developement environment.
We just want to know how we can transport them in the quality environment. What is the right method to transport them.
Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
Thanks & Kind Regards,
Hardeep

Thanks a lot for all of you for your quick response. But i still have questions.
If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role.

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

Crystal Reports - Saving and the transport request screen

Good morning BI people,
Has anyone had this annoyance?
You are creating a Crystal report(2008 v12.2.7.598) with connection to sap bi(7.01) and when you save, the transport request screen doesn't come up front of crystal reports, it is created behide the screen. so, you sit and look at the hour glass for 5 mins, move on to other things, and then you realize that the transport screen is behide the crystal reports screen. and, it is not like you can minimize the crystal screen. you have to minimize all your screens and then click on the crystal screen from you tool bar and then, the transport screen comes up.
anyone have a fix for this?
or am i alone....
thx,
Erik

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Transport request and task releasing?

Hi all,
I've three systems dev,QA and prod.I'm working on dev client and I've a two reports(say A and B) under the same transport request with different tasks,If I want to release the report 'A',is it necessary that I shud be releasing th ewhoel request number or if I release the task it's enough.why a transport request will have different tasks,when the transportationof ht ese taks associated with the transport request is independent.
I've released the task to QA and the QA sytem had some problem and did nto get he task,what I shud be doing now,release the task again or ?
Can a report be assigned to different tasks(numbers) under the same transport request.can the report be assiged to different transport requests.please let me know.
thanks and regards
Message was edited by: henry

There is a transport route defined by your Basis Team for the transport scenarios. There, the possible ways through which request can be moved( from Dev --> QA & Dev --> Prod ) are defined.
But it does not mean that you can't transport your request to production without transporting it to QAS.
Furher, when you release a transport request, it does not automatically move to QAS or Production but someone from your Basis Team has to run the TP through Xn STMS, which in turn imports the objects from your Dev Request and put it on QAS / Production.
In case of any error encountered while importing to let's say QA, you need to check whether it's a problem with the transport buffer or is it because some objects are missing from the transports or dependent transports are not moved as yet.
Please understand that there is no concept of re-release.
You can only ask your Basis guy to re-import it.
According to the encountered problem, you need to decide whether you should just ask you Basis consultant to re-import the same Transport.
Or create a new request through SE10, and include all the objects from your last request. Release it and ask your Basis guy to import it to QAS.
Or first move the dependent transport and then ask your Basis guy to re-import your current transport.
Or create and group the changed objects, altogether in a new transport by changing all the objects which were contained in the original request.
Further, to your other queries, if two users are modifying the same program ( not exactly at the same time - that's not possible but one after other )then that program will be contained in two separate tasks of the same transport request.
I hope it answers a few of your queries.
Thanks,
Ram

Issue in BI Objects collection into Transport Request

Hi Experts
I am experincing a Issue in collecting Infocube and related objects into a transport requests using transport connection.
My Scenario is as explained below
1.Migrated 3.x Dataflow into BI 7.0 Dataflow
2.Dataflow consists Infocube -->DSO (two separate DSO) --> Infosource (only 1) --> Datasource (from 2 different Source systems)
I have manually captured all my objects into a transport requests. i.e while activation.
The issue is when I try to use transport connection on this infocube with "Dataflow before" & Automatic collection options.
I am getting the below mentioned error.
Object '4C3C4WGBCRK9UWKNDGGYNKDNA' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '4C3C4WGBCRK9UWKNDGGYNKDNA' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
I am sure that all my objects are collected into transport requests & I checked the object entry of all the dataflow objects..
Appreciate your valuable inputs on this.
Thank you in advance
PKC

In that case, pls ignore my prevoius post...
The issue is when I try to use transport connection on this infocube with "Dataflow before" & Automatic collection options.
With this option, system should have collected the related routines. Did u expand routine node, and check (ON) the check box for that routine ???
(Once all objects got collected, now from the right most window, expand each node (application, infoarea, routines etc) and put checkbox 'ON' (checked) to ONLY the objects (routine 4C3C4WGBCRK9UWKNDGGYNKDNA' ) u want to transport. Once u r done with that, click on Transport (truck Icon) and enter package name, if system prompts.)

To show the release status of the transport request

Hello Experts,
I am having a requirement like the following:
I need to list the transports along with the release status of the transport request in a View.
Release status means that transport request imported into Development system, Quality system and Production system.
Which table will hold this information?
I have checked with E070. But i dont know how to find in that. Or any other table is there to do this?
Thanks and Best Regards,
Suresh

Hello Kalyan,
I dont know how to find my request in TMSBUFTXT.
For example i am having a TR now in Dev system: XXX45678.
If i have imported it to Quality system, then how to find this entry?
Or if i have imported it to Production system, then how could i find that the TR XXX45678 is now in Production system.
Since i am creating a View, i need the information that in which Database Table this entry will be stored.
I dont want Function module name.
Best Regards,
Suresh

View and Generic datasource in a transport request

Similar Messages

Maybe you are looking for