View Attached Disk (Time Capsule) on Windows?

I have just brought a new Time Capsule and i have attached a 250GB External HDD. The purpose of this hard drive is to share content over my wireless networks to my other OSX devices. I was wondering if there was a way to see this attached HDD on a windows baised machine? Is this possible?

P.wrangles wrote:
I had to download and install Airport Utility on the windows PC in order to see the attached hard drives. Once i had done this both the TC data and attached HDD appeared in My Computer.
Yes, that loaded bonjour for windows.. it is not the utility which is important.. it is bonjour.. as I put in my first post.

Similar Messages

Access hard disk in time capsule from Windows XP installed in VMware Fusion

Hello.
I have installed VMware Fusion 3.0.2 on my iMac (Mac OS X Version 10.6.3) , and then have installed Windows XP on the Fusion.
Now, I can not access the hard disk in the Time Capsule from Windows XP.
Does anyone have an idea to overcome this problem?
Thank you for your help.
Best Regards,
Hoss
hoss_serri (at) yahoo (dot) com

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Fusion. You should post your question in the Fusion forums:
http://communities.vmware.com/home.jspa

Firmware 7.4.1 Time Capsule and Windows

Hi
I know that firmware 7.4.1 has caused problems for people using Time Capsules with Windows PCs:
http://theappleblog.com/2009/03/06/a...ate-available/
I know that this problem affects the original TCs as I actually have an original TC and I had the problem with firmware 7.4.1 (fixed by downgrading to 7.3.2).
Does anyone know if the problem with 7.4.1 only affects the older TCs or does it affect the new updated TCs (released earlier this year) as well?
I want to buy another TC, but not if it has the 7.4.1 problem and not if it can't be downgraded to 7.3.2.
Thanks

i have been using an AEB w/ an attached USB drive to backup wirelessly using Time Machine for several months. I've had no problems restoring several files wirelessly from the TM backup. No problems at all so far. I have a 2nd hard drive attached to the AEB which serves iTunes and movies wirelessly. No problems there either.
The only issue is that accessing these drives is slow even when the mac is connected to the AEB via ethernet (the TC exhibits the same issue). If you aren't upset by that speed, or don't mind jacking the drive straight into you mac when you need to make big transfers, it's a perfectly livable system. I was certainly hoping that the new AEB and TC would feature upgraded server ability and loosen up that bottleneck but they apparently have not. c'est la vie
As far as an official comment from apple is concerned, it's doubtful that you'll ever get that. And if you did get it, what good would it do? Do you think they'd pay you a huge settlement if they 'officially supported' this backup method and you wound up with a corrupted backup that caused data loss? It either works or it doesn't and personally I give more credence to the experience of other users and my own cautious trial than I do to any official statement Apple makes on the subject.

Time capsule in windows XP

How do you set up the time capsule in windows XP as a network drive, I tried to map it using \\10.0.1.1\name but i cant see the drive

Did you load bonjour for windows onto the PC.. ?? That helps alot.
The full windows version of the airport utility includes bonjour I believe.
Did you set the TC in the right workgroup.. on the disk file sharing page of the manual setup in airport utility?
Did you turn on guest access with read and write permissions.
Also just use the IP and see what resources are available.. if you misspell the name it will already fail. And use SMB compatible names.. ie short no spaces.. no apostrophe in particular.. as Apple setup loves to do.. pure alphanumeric.

How do i set up my time capsule with windows

How do I set up my airport time capsule using Windows 7 home premium?

If you have the newest AC model TC.. you might be in trouble. Apple specifically state you need v6 airport utility. They do not provide v6 with windows.. only Mac and iOS. If you happen to have iphone, ipad even itouch, you can download and install the airport utility and use that.. you just cannot do the setup from windows.

Using Printer via Time Capsule for Windows

Hi,
Could you please guide me how can I use printer connect to my time capsule from windows based PC. I can do it from my mac but unable to print it from Windows PC.
I have also downloaded Bonjour, it detects my HP printer 1018 but when it comes to driver it is not able to locate also tried so many different option for the driver but unfortuntely no luck so somebody please guide me to print (HP Laserjet 1018 printer) from windows connected via Time Capsule 2TB.

When you setup the printer choose a local printer.. then change the port to TCP/IP and type in the IP of the TC.
Complete the setup.. and choose the 1018 HP printer drivers.
That should be all there is to it.
Download the airport utility for windows and see if the printer is there.
Ensure you have the TC setup in WORKGROUP for file sharing.
Make sure the computer is in home.. not work or public.
Make sure you do not have homegroup activated.
If that doesn't work turn off the firewall and try again.

Removing Password Protection From External Disk Attached to Time Capsule

I have an TV and when I try to watch a show it always says that "file format is not recognized." I am pretty sure it is because my computer gets disconnected from the external disk that all the media is on. This disk is attached to my time capsule. I wish I could make it so it would automatically reconnect with the disk after being disconnected, but I can't figure out how to make the external disk non password protected without making my network password protected also. Does that make sense? How do I make a disk so it is not password protected if it is on my password protected network? If my computer is on the network then I should be able to access discs without having to put in an additional password, no?

I have an TV and when I try to watch a show it always says that "file format is not recognized." I am pretty sure it is because my computer gets disconnected from the external disk that all the media is on. This disk is attached to my time capsule. I wish I could make it so it would automatically reconnect with the disk after being disconnected, but I can't figure out how to make the external disk non password protected without making my network password protected also. Does that make sense? How do I make a disk so it is not password protected if it is on my password protected network? If my computer is on the network then I should be able to access discs without having to put in an additional password, no?

Backing up a external hard disk attached to Time Capsule

I have a hard drive attached to the USB port on my Time Capsule where i keep iTunes music and iPhoto Library, however my problem is that this drive does not get backed up through Time Machine. For some reason Time Machine cannot 'see' it? Any advice?

Time Machine does not support backup of a NAS device (e.g. HDD inside or connected to TC). If your USB HDD is formatted HFS+, you can connect it directly to your Mac and TM will back it up.

I can see my usb disk when it is attached to Time Capsule but not its contents. How do I change that?

When connected to Time Capsule
I have "custom" permissions
everyone can rfead and write
no one else has anything
When connected to a USB port
I can read and write
staff can read and write
everyone can read only
This is in my AirPort profile
Software Versions:
Menu Extra:    6.2.2 (622.2)
configd plug-in:    6.2.5 (625.6)
System Profiler:    6.0.1 (601.1)
Network Preference:    6.2.2 (622.2)
AirPort Utility:    5.5.3 (553.20)
IO80211 Family:    3.2 (320.1)
Interfaces:
en1:
Card Type:    AirPort Extreme
Firmware Version:    Atheros 5416: 2.1.14.6
Locale:    FCC
Country Code:    US
Supported PHY Modes:    802.11 a/b/g/n
Supported Channels:    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status:    Connected
Current Network Information:
BriarRose:
PHY Mode:    802.11n
BSSID:    0:1f:5b:88:89:39
Channel:    6
Country Code:    US
Network Type:    Infrastructure
Security:    WPA2 Personal
Signal / Noise:    -42 dBm / -96 dBm
Transmit Rate:    117
MCS Index:    14

I figured it out.
http://www.brighthub.com/computing/mac-platform/articles/48709.aspx

Access to WD 500 GB HD connected to Time Capsule on Windows PC

I have a 500 GB WD My Book hard drive connected to 500 GB Time Capsule via USB. I am able to view both hard drives on my MacBook, but I can't view the attached My Book on my Windows PC. Can anyone help? Is it possible to view the My Book on my Windows PC? Any help would be greatly appreciated.

Make sure file sharing is turned on and give the TC full access to the guest account. ie read and write
Make sure the WORKGROUP is set correctly.
This is Mac version but is basically the same as the windows version.
Then in Windows Explorer type in the IP of the TC...
\\10.0.1.1 or whatever it is.
If it does ask you for username and password.. admin and public will do nicely.
No luck the windows computer is blocking the access. Ensure no firewall is blocking by turning them all off.. and ensure the computer is set to home location, not work or public.
No luck.. get rid of the USB and plug it in properly by ethernet.
USB to ethernet adapters are bad.

How to use my time capsule with windows vista

i have a 2tb time capsule iphone 3gs appple tv and a ipad 2 the wife and kids have iphone 3gs and 4 and id like to set up a home network for us all to use and share music and photos is this possible

Sorry the title never gets into detail at any point.. no vista computer is listed.
Access the vista computer to TC turn on the guest network and allow full read write access. Make sure you have the workgroup set correctly. There are issues sometimes on the windows side but try that.
As for using the TC as a file store.. well it isn't a good idea. It is a backup device.. which has no ability to back up itself. There is no mirrored disks and one day it will die and you can say bye bye to your precious photos and music. You can work your way around the issue.. sure.. in the end you will need an alternative backup on a computer.. that alternative backup will then be backed up to where??
If you must run your itunes and iphoto library on the TC just read about how to set up the libraries in network location. Google will find the posts.
http://gigaom.com/apple/using-time-capsule-as-a-media-drive/
You perhaps should read all the other posts about why not.. as well as how to.

How can I see my network drive from time capsule on windows vista pc?

I connected my Time Capsule 2tb to Windows PC and do not see the Network Drive for TC. I can see TC on my wireless MacProBook, but cannot see TC drive on the pc. What can I do on the PC to find Time Capsule's drive?
Thank you.

From the Mac as it is easier to use.. open airport utilty and go to the disks, file sharing page. turn on the guest account.. give read write access.. and make sure the TC is in the correct workgroup or type in the work group name.. update the TC.
In vista.. Open windows explorer.. in the address bar type \\ip\
IP meaning the IP of the TC. . wait.. waiting wait.. windows scratches its bum.. thinks some more.. will finally kick up a username and password request.. type in whatever you need. Voila.. TC appears.

Time Capsule With Windows 7 Please Help Going Round in Circles!

Hi
have just got a 1Tb time capsule for Xmas. I have a 13" Macbook unibody and have installed the time machine and airport utility through this, thinking apple computer + apple time capsule will be easier. All went well and the Macbook sees the Drive and has backed itself up nicely. So very pleased.
Then the problem i have a windows 7 machine and went off and installed the airport utility on the machine. All went fine, but i cant see the HDD, i can see it in network places but all i can do is read it, i can't write to it from my windows machine. Have looked at loads of posts about mapping drives making sure latest firmware (7.5) etc but am totally lost as i read so many different things that i just ended up going round in circles!
What i wanted to do was put all my media, documents and pics on the TC and allow both machines to share from it and use it. But no matter what i try it seems i can only write to it from the mac. I have seen in the airport utility on the windows machine under disks (after selecting manual setup)> file sharing that the secure shared disks is set to "with device password", now i have the passwords, i just cant seem to see where i can see that drive in windows and where to enter the password!!! Should that be set to something else? File sharing is enabled.I assumed once i had installed the airport utility on the windows machine the HDD would just pop up in my computer or something like it popped up easily on the mac! Or am i being stupid and it doesnt work like that?
The windows machine is connected via ethernet and the mac is wireless.
Please can someone help as its driving me mad and i just cant seem to figure it out. Am not that computer savvy when it comes to things like this and am probably missing something really stupid but you know what its like when you have stared at something for hours. Any help would be most appreciated or SIMPLE guide or something
Many thanks in advance and happy Xmas to you all

Just an update to the above i can now no longer see the time capsule in network places!! All i have done is retstarted!!! I can still see the time capsule from my mac and access it!!!

Time Capsule and Windows 7 Back Up and Restore

Hello,
I would like to know i can manage to save my backup of windows 7 on the Time Capsule using the back and restore tools ?
I am using on my time capsule the file sharing with the disk password, but it doesnt seems to work.
Can u please help ?
Thx !

Open the guest access and give read and write permissions.
Also make sure you actually give the WORKGROUP name in the WORKGROUP area, correct to the win7 workgroup..
If you still cannot access the TC try turning off the firewall in win7.. you may also need to ensure that win7 is recognised as in home, ie local network, not work or public.
Open a command window and ping the TC to make sure you have network access.
In windows explorer type \\ipaddressofTC\ into the address bar.. that being its IP address. You can also try netbios name.
If none of that works post again but it should.. on latest firmware on the TC??
You need to use windows backup which is near useless.. I recommend you download a utility that can do a proper disk image.. there are plenty around.

External Drive attached to Time Capsule failing to work consistently

This problem has been occurring since we started using an external drive attached to our Time Capsule as a backup destination for Time Machine over a year ago:
Everything will be fine for a few days or weeks, but at some point backups stop working. This sometimes gives errors (Time Machine could not complete backup, I think) or sometimes it just looks like the backup has gotten stuck (reporting 235.32 MB of 22.86 GB for days). With the latter problem it seems to cause other issues with the OS like System Preferences not responding anymore and certain Save As... dialog boxes not appearing.
Every time this happens, what I do is disconnect all users through AirPort Utility and then plug the drive into one of the computers and run Disk Utility on it.
Each time, without fail, there is the error "Incorrect number of Access Control Lists" stating it should be 0 and it really is something in the thousands usually.
The volume is always repaired successfully, but then the cycle continues.
We've tried a couple of different drives and it always ends up happening.
I've seen other posts with similar problems, but nothing laid out exactly like my problem, and no real fix for it.

Yes, indeed. Let me give some background.
I have an old Gigabit AEBS (7.4.2) as my main router with a Gigabit connection to my Time Capsule (500GB, 7.4.2) running in bridge mode. Both run as wireless access points for my network "Hogwarts." I backup several machines to the TC's internal drive with absolutely no problems whatsoever. Practically bulletproof. I backup two media heavy machines to the external drive attached to the TC. The drive is a Western Digital My Book 1.5TB that before the TC came into our lives, ran flawlessly when attached to my iMac as a backup destination. The media machines are Dumbledore, my mini running as a HTPC, and Tonks, my wife's laptop busting with pics and video of our son. Once I started backups to this drive connected to the TCs, I started to have problems with backup. That's the situation. Here's what I've tried to correct it.
I had a year's worth of backups. Went to the Genius Bar who recommended starting over after they checked out my setup over Back to My Mac. They couldn't find anything wrong and supposed my backups were hopelessly corrupted. So I followed their advice with Dumbledore and archived those for Tonks. Trying to start over with Dumbledore fails within the first 75 of 500 GB to backup every time. I've redirected syslog reporting at Debug level from the TC to my iMac and formatted the external drive several times. I have done disk repairs on the drive, Dumbledore's sparse bundle, and the TM volume contained in the sparse bundle. I've only gotten the "too many ACL's" error. The WD drive comes with SmartWare software I've used to check the S.M.A.R.T. status (100% OK), test the drive (100% OK) and deactivate the Virtual CD partition used to, among other things, encrypt the drive. My drive is unencrypted and have made it as plain vanilla as I can: GUID with one 1.5 TB Mac OS Extended Journaled partition.
What I've noticed when I check the status of the TC when the bakcups fail is that the drive becomes unmounted with no logged error. The client computer either hangs Finder or reports the backup failed. My wife has become so frustrated with hard restarts that she has turned off Time Machine until I fix this. Airport Utility simply no longer sees the drive. The client computer can reconnect over AFP but the drive will not be accessible unless I restart the TC. Then if I do some Disk Utility repairs on the external drive and on the virtual volumes it contains, I can start backups again...until the next spontaneous unmounting of the drive. Which leaves me talking to you as a completely frustrated and disappointed Apple user. This is so not Apple quality experience.
The only shot in the dark I've seen is that the TC repeatedly updates its DHCP lease every 5 minutes or so despite having a 4 hour TTL. Weird.

View Attached Disk (Time Capsule) on Windows?

Similar Messages

Maybe you are looking for