View backed up files in Time Capsule

how can I check that time capsule is actually backing up all my files
How do i tag folders i want backed up in Time Capsule?

mackerman wrote:
how can I check that time capsule is actually backing up all my files
See #15 in Time Machine - Frequently Asked Questions.

Similar Messages

  • How to improve the speed for backing up files to time capsule via in hose wifi?

    How to improve the speed for backing up files to time capsule via in hose wifi?

    via in hose wifi?
    Use a bigger hose??
    House??
    Need to spell this out a bit more..
    But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

  • Can you rename backed up files on time capsule?

    Can you rename backed up file on time capsule?

    You can rename the sparsebundle file that Time Machine has used for the backups of a Mac on a Time Capsule.....if that is what you are asking......just like you can rename any file on a Mac.

  • Can't find backed-up files on Time Capsule

    I have a MacBook and, more recently, an iMac, both of which have been regularly backing up to a iTB Time Capsule. Then the hard drive on my MacBook, which contained all my iTunes and my photos, broke and had to be replaced. Now that I have my MacBook back with a new (but empty) hard drive, I want to restore all my old documents to it. But when I go into Time Capsule, "Documents" and "Music" are greyed out. All that I can recover are applications. Will someone please tell me that my old documents were in fact being backed up and that they can still be recovered?

    tom,
    Welcome to the Apple Discussions!
    The following may be helpful in migrating your data back to the new hard disk.
    *_Migrating User Data From One Mac to Another_*
    *Wirelessly or Directly Connected?* (For AirDisk Users)
    Bear in mind that for Time Machine to successfully migrate user data, the backup disk must be accessed in the same manner in which the backups were originally created. Otherwise, the backups may not be visible for migration.
    In other words, if backups were performed wirelessly to a hard disk attached to an Airport device, then the restoration will need to be performed wirelessly. On the other hand, if backups were performed with the hard disk attached directly to your Mac, then the restoration will need to be performed with the hard disk connected directly to your Mac You cannot perform backups via one means and be able to access them via another means.
    *Using Time Machine Before Initial Launch of New Mac*
    Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac.
    Start the new Mac and begin the setup process. At some point it will ask you if you would like to Migrate/Import user data from another computer or a Time Machine backup disk. Follow the prompts and select the date of the backup you would like to restore your user data from. Once the migration is complete use Disk Utility to repair any permissions issues.
    *Using Time Machine After Initial Launch of New Mac*
    If you have already created a User Account on the new Mac using a DIFFERENT Username and Password from the old Mac, then do the following:
    Attach the hard disk containing the previous Macs' Time Machine backups to the new computer.
    Go to Applications --> Utilities --> and launch Migration Assistant.
    At the welcome dialogue click "Continue." You may be required to enter your Admin password.
    For Migration Method choose "From a Time Machine backup or other disk".
    Select the hard disk containing the previous Time Machine backups. (Give Migration Assistant some time as it scans the disk for eligible data to migrate.)
    Now select which User Accounts you would like to migrate over.
    However, if you have already created a User Account on the new Mac using the SAME Username and Password as the old Mac, then you will need to do this:
    Create a new User Admin Account on the new Mac with a completely unique name.
    Now, delete the first User Account you created on the new Mac - The one that is identical to the old Mac. (Of course, backup any important files that were created using the new User Account before deleting it.)
    Finally, use Migration Assistant as described above to move the old User Account data over from the Time Machine backups.
    *Full Backup After Restore*
    Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
    Let us know if this was helpful.
    Cheers!

  • How to delete backed up files from Time Capsule in Lion.

    Since I upgraded to Lion I have been unable to delete old backed up items in Time Machine. I use Time Capsule and previously with Snow Leopard I could right click on a file and choose to delete all copies of the file. The option to do that is no longer available. Is there a setting I'm missing here? Thanks.

    You cannot delete items from Local backups (the white "tick marks").  See #30 in Time Machine - Frequently Asked Questions.

  • Time Machine does not see back-up file on Time Capsule

    I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
    How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
    Thanks in advance to the collective brain trust.
    Robert

    I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
    How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
    Thanks in advance to the collective brain trust.
    Robert

  • Backing up personal files to Time capsule and then upgrading to Leopard

    Hi.
    I recently bought the upgrade disks to Leopard from 10.4.11.
    i also bought Time capsule.
    I was advised in the store to save all my personal files (photos, I tunes library, work) to time capsule, then perform a clean upgrade to Leopard, the replace all my personal files to my iMac, then doing the complete system back up to the time capsule.
    I have managed to get the iMac talking to Timecapsule, I can print so this is all cool, but how do I save all my personal data to the timecapsule? I'm sorry if this is too daft a question, but I have tried seeing if there was an intuitive way of learning this on the Mac but as these files are so important, I really don't want to make a mistake that would lead to me losing everything.
    Many thanks in advance.
    M.

    in the Finder use the Go command (top file menu) and in the window type afp://10.0.1.1 or whatever your TC ip address is, then you should be able to access that hard drive. you should use Airport Utility to assign a password to your TC hard drive.

  • HT201250 Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet?

    Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet? i want to buy an iPad Air and to forget my laptop and i think that even the 128 gb wont be enough some times. I am wandering if time capsule can be used as external hdd and to connect on it via wifi ...

    No. You cannot access your Time Capsule directly from an iOS device. The only way to back up an iOS device is to a computer through iTunes or to iCloud, though in some cases you can open and save files via another cloud-based service such as Dropbox.
    Regards.

  • After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

    after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

    Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

  • How can I be sure that the back up to my time capsule has backed everything up as when I enter time capsule and interogate the back ups i can't identify individual music or picture files?

    How can I confirm that the back up to my time capsule has backed everything up as when I enter time capsule and interrogate the backs ups I can't identify individual photo or music files?

    You cannot browse a Time Machine backup with the Finder. To restore individual music files or any other files normally available in the Finder, open your Music folder then "Enter Time Machine" using the Time Machine icon.
    Restoring individual photographs is slightly more cumbersome. Apple recommends restoring the entire iPhoto Library, but if you want to locate an individual photograph you could use Time Machine to restore the old Libary. Restore it to an alternate location to avoid overwriting your existing one. Open iPhoto while holding an Option key, open the restored Library, find the photo you need and export it, close iPhoto, re-open it with your usual Library, and import the photo.
    Time Machine depends upon a number of sound engineering principles for reliable operation, one of which is "faith"
    Your files will remain intact until your Time Machine backup device becomes inoperative.

  • Can I access the data backed up on my time capsule remotely via the Internet?

    Can I access the data backed up on my time capsule remotely via the Internet? Let us say I have all my music or photos on my time capsule at home and I want to access it while I am outside over the Internet can I do this?

    See remote access methods here.
    https://discussions.apple.com/community/wireless/airport?view=documents
    I am not sure what format these files are in.. but if they are itunes or iphoto.. have a care.. it is easy to corrupt them.

  • How to restore mail files from Time Capsule onto a different machine?

    My Macbook Pro hard drive crashed, and I want to restore my backed-up mail files from Time Capsule onto my Desktop Mac (iMac 27").  When I try to restore by opening Time Capsule with Mail already open, I can only see the current mail files on the iMac (not the backed up files on the MacBook Pro), even when I point to the MacBook Pro backup file.

    Hello there, AngryMario.
    The following Knowledge Base article offers up how to restore mailboxes and content using Time Machine:
    Mail (Mountain Lion): Restore mailboxes and their content
    http://support.apple.com/kb/PH11713
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Encrypt files in time capsule

    how to encrypt files that are backed up in airport time capsule?

    The option to encrypt backups will appear when you first select a disk to be used for backups.
    If you want to encrypt a disk that already has backups, you must remove the disk from backups, then click to use that disk, and the option to encyrpt will appear.

  • Can't access files in Time Capsule in WIN7 64 Bit- says folder is empty

    Hi there. I can't seem to access my files in Time Capsule using WIN7 64 BIT, it works fine as a router , i can see the time capsule online and how much space it's occupied, however whenever i click on it , it says folder it empty. I can access the files from OSX 10.6 (Snow Leopard).
    I tried to drag and drop new files into the Time Capsule in WIN7 , it copies/paste the files fine for a second and then disappear, and if i go back to the Snow Leopard i can see those folders again , so i am guessing i need enable some kind access/ file sharing option or whatever that allows the files to be visible. Has anyone faced this situation in WIN7 64 BIT ?
    Thanks

    http://www.nullriver.com/products go download Connect360 gives your Mac the ability to share through Xbox360.

  • My start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    my start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

Maybe you are looking for