View BT26H_APPT/ApptDetails is not defined in the run time repository.

Hi,
I am getting this error when i component work bench.view BT26H_APPT/ApptDetails is not defined in the run time repository that was loaded. can i manually load in run time repository or how can i approach this issue.
rose.

Hi Rose,
While enhancing any component using an enhancement set you can give any name for bsp application under customer namespace ( like z, y) but usually when we create a new application we just put the z or y infront of the component name and create it for example if you want to enhance bp_head_search then usually people create a new bsp appl with name zbp_head_search because it will help in finding it in se80 to figure out the component anyway you can give any name if you want.
For each component you need to create a new bsp appl.
You should use one enhancement set per client, you can use sm30 and view BSPWDV_EHSET_ASG to define your enhancement set for each client.
So to enhance all the component in same client you should use same enhancement set for that client.
I think that would be useful, let me know if you have any other doubts.
Thanks,
Shobhit

Similar Messages

View YLOY102H_MSH/YSolCONconfMA is not defined in the runtime repository

Hi Gurus,
We have enhanced one LOY102H_MSH component and added various custome view in it.
After 3-4 months there is a requirement in which I need to add on custom view in the same component.
i added on custom view YSolCONconfMA and at the time of creation I have added two context node (Membership and MAGenAtt). I have tired without context node as well but same error message is coming as mentioned below.
Problem : 1 When I am double clicking and try to open the new created view it giving message "View YLOY102H_MSH/YSolCONconfMA is not defined in the runtime repository that was loaded"
2. these two context nodes are not coming with the new created view.
Any budy have have any idea.....
Best Regards,
Durga

Hi Durga,
You can cross check the created view in the YLOY102H_MSH. Check whether the context nodes are there
under the view.
In the used component, check in the repository if you have this interface view availabel under the
component usages.
Regards,
Leon

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

View zview is not defined in the runtime repository that was loaded.

Hi,
I created an enhancement for component BT111H_OPPT and created a view "ZVIEW" in it.When i clock on my ZVIEW i am getting the following message:
view zview is not defined in the runtime repository that was loaded.
What does that imply?
Isnt the view defined in the runtime repositry when we use the wizard to create it?
Thanks in Advance.
Regards
Shilpi

Hi Shilpi,
Did you add your view into the Viewset/Window in Repository Browser ?
Good Luck
Eli Steklov
Please Reward Points if it Helped

RV13B is not defined in the ABAP dictionary

Hi Experts,
Iu2019ve a requirement to create a smartform,and then save it as a pdf and email. I have all of this done except for one part. At present my email address (for testing purposes) is hard coded as the email address. However I want to automatically pick up the email address to which my form is to be sent.
The email address is found in transaction mn22. The pdf will be emailed to RV13B-PARNR (Partner) based on KOMB-LGORT (storage location). Each storage location is unique.
Iu2019ve put in the following code:
SELECT PARNR FROM RV13B INTO CORRESPONDING FIELDS OF TABLE it_vemail[]
WHERE stor_loc EQ KOMB-LGORT.
However Iu2019m getting the error RV13B is not defined in the ABAP dictionary as a table, projection view or database view.
Could anyone give me some help?
Thanks,
Mike.

Mike,
F1 Technical help will not give you the table name in some cases.Instead of the table it will refer to the structure.In such a case you need to get the corresponding table for that field either from SQL trace or searching the possible tables with such field using SE84 which requires a bit of analysis in zeroing on the correct table where you can get the appropriate data related to that field.
SE84>>ABAP Dictionary>>Fields>>table fields.
Give PARNR and get the list of the possible tables containing PARNR as a field.If one is aware of the functionality then it will be easier to zero in on the field and the corresponding table from that list.
SQL trace can help you in tracing out the possible tables used by a transaction code.ie if you do a SQL trace on VA01 you will come to know all the possible tables of VA01.
Thanks,
K.Kiran.

Data Source Z*** is not defined in the source system

Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?

Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny

Namespace not defined in the SWCV error

Hi Experts ,
I am new to PI.
I am executing one IDOC to IDOC scenario for MATMAS05.
I have done all the source side, integartion server and destination side server configuration.
Source:SAP R/3 server
Int server:PI
Destination : SAP ECC 5.0
I have imported the MATMAS05 IDOC.
Created one name space under my predefined SWCV.
Then i copied that IDOC to both the source and destination in message mapping.And map all the red mark required filed of the target with source.
While activating the message mapping I am getting one error.
Namespace http://piidcoctoidoc is not defined in the software component version MANISHASC2 , 1.1 of manisha.co
and
Mapping not sufficiently defined
Can anybody help me how to resolve this?
Thanks
Manisha

hi Manisha
while activating the objects which you have created , you must be getting this error\
so while activeting the object select your Software component also and activate both then you will not be getting the error
becuase every time you generate a namespace in any software component then you need to activate the software compnent along with the object
if you left SWC and activating only the object then you must be getting this error.
for activating any objevt your software component must be activated first
what you must be doing ,,,,,, you are activating only the object and not your software component
so activete both first your software component and then your object
Thanks
sandeep
If helpful reward points
Edited by: sandeep sharma on May 16, 2008 1:04 PM

The tax code entered is not defined in the company code country.

Dear sap guru's
I am facing a problem while doing invoice or while cancelling the invoice or even during Subsequent Credit/Debit
Tax code V0 in procedure is invalid
   Message no. FF704
Diagnosis
   The tax code entered is not defined in the company code country.
System Response
Procedure
   Check and, if necessary, correct the entry.
Procedure for System Administration
   If it is not an input error, check and possibly change the system
   settings.
   To do this, choose Maintain entries (F5).
   1. Check whether the required tax procedure has been allocated to the
       company code country. The Procedure field is on the detailed screen.
   2. If you need a new tax code, you can create one yourself.
For this i have checked the assignment of company code and tax code V0 in Tcode (OBCL)
In FTXP the tax code is created in country IN, for the same tax procedure and the tax is a input tax.
please suggest what could be the exact problem
Regards
Sujit

Hi Sujit,
1.Go to FTXP and create tax code V0 for country IN and procedure ZAXINN.
2.In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
3.Also things to be checked
1> assign country to company code
2> assign company code to tax code
3> create tax code for country IN
4.Under the following menu path, pls check if you have assigned your tax code to Company Code
IMG>Logistics (General)>Tax on Goods Movement>India>Basic Settings>Determination of Excise Duty>Condition Based Excise Determination>Assign Tax Codes to Company Code
Hope it clears,
Rahul.

InfoSource 8ODS_SLS is not defined in the source system

Hi Guys,
    When I tried to load data from ODS to Infocube, I am getting the following error.
InfoSource 8ODS_SLS is not defined in the source system
      Source System is not R/3. It is just a flat file and data was uploaded into ODS. When transferring the data from ODS to Infocube, I get this problem. And I have defined the update rules for infocube and also given the infosource name as ODS.
      But the data is not getting uploaded in the Infocube.

First replicate your BWSELF system.
Then, Run this program in SE38:
rs_transtru_activate_all
Enter the source system (your BW system)
Enter the datasource (8ODS_SLS).
If you get an error message immediately, the datasource doesn't exist. If it runs, check and make sure you get no error messages.
/smw

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

Infosource 8ZISCMS10 is not defined in the source system

Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...

When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

Error: Infoobject is not defined in the source system

hi
(I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
this is my issue:
I am trying to load master data (attr) for an infoobject.
But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
"Infoobject is not defined in the source system"
"Erros in source system".
(I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
any help on what could be wrong here? Pl let me know,
thanks

Thanks Ricardo,
I have tried that b4. and it says the "source system connection is OK".
any other idea?
Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
thanks
Message was edited by: Esan

InfoSource is not defined in the source system

Hi,
We are getting error 'InfoSource is not defined in the source system' while extracting data from Planning book to Cube in APO.
Data is coming up to Extrack checker ( RSA3 ) but not comming to PSA.
Please help me.
Thanks
Subba Rao

Hello Subba,
Have you replicated the datasource on the BW side? If you use the 3.x data flow then you also need to assign the datasource to and infosource.
Best Regards,
Des

ZSD_TABLE is not defined in the ABAP dictionary as a table"

Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
Thanks

Hi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna

DataSource 0HR_ATT is not defined in the source system

Hi Gurus,
When I am trying load data for HR Master data Attribute it is not loading any anything. I checked that datasource in Rsa3 at R/3 side there it is showing
"DataSource 0HR_xx_attr is not defined in the source system", can anybody give me the solution.
I will assign full points.
Thanks in advance.

Hi Sergio,
I have replicated the datasource in BW. Still It is showing the same.
Kindly advice.
Maruthi

View BT26H_APPT/ApptDetails is not defined in the run time repository.

Similar Messages

Maybe you are looking for