View change documents for risks and functions

Is there a way to see what changes have been made to risks and/or functions?  Our SOX group would like to monitor the changes that have been made, who they've been made by and when.  Currently we can go into the individual functions and risks and look at the "Change History" but not sure if there was a way to see a massive list?  Possibly a table that we can pull?
Thanks for any help!
Elizabeth

Hello Elisabeth,
unfortunately in 5.2, you will have to go to the individual functions.
5.3 will have a one-click overview for risk/function changes, as well as configuration changes.
Frank.

Similar Messages

  • Changes documents for BOM and Routing

    How Can I find the change documents for a BOM and routing?

    Change Documents For BOM
    CS80 - Material BOM
    CV80 - Document Structure
    IB80 - Equipment BOM
    IB81 - Functional Location BOM
    CS81 - Standard BOM
    CS82 - Order BOM
    CS83 - WBS BOM
    Change Documents for Routings
    CA60 - Task List Changes
    CA61 - Routing
    CA62 - Reference Operation Set
    CA63 - Rate Routing
    CA64 - Reference Rate Routing
    Hope the above may help you.

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • View Change Animation For Slide Off/On Screen?

    Hi All,
    I found the view change animations for flipping and peeling, but is there a way to get one view to slide off the left side of the screen and another one slide in from the right?
    Thanks
    Ray

    No, for some reason the push animation used by the Nav Controller isn't available with UIView animation. You can use CATransition, which includes push from left or right types (see the ViewTransitions sample app). But that transition isn't the same as you get with the Nav Controller. Some people don't like the way the outgoing view fades at the end of the transition.
    If you don't like the CATransition push, try this one: [http://discussions.apple.com/thread.jspa?messageID=9239601&#9239601].

  • Change documents for Classification View

    Hi,
    Can anyone please tell me how to activate Change documents for the Classification view of material master.  if we activate that one what will be consequences?
    Thanks in adavance

    CHANGING CLASSIFICATION VIEW FOR MATERIAL USING BAPI
    ->CREATE CHARACTERISTIC USING TCODE CT04
    ->CREATE CLASS USING TCODE CL01 .
    -> RUN THIS PROGRAM TO CHANGE THE CLASSIFICATION VIEW
    PARAMETERS: P_MATNR TYPE MARA-MATNR. "MATERIAL
    DATA: OBJECTKEY TYPE BAPI1003_KEY-OBJECT,
    OBJECTTABLE TYPE BAPI1003_KEY-OBJECTTABLE,
    CLASSNUM TYPE BAPI1003_KEY-CLASSNUM,
    CLASSTYPE TYPE BAPI1003_KEY-CLASSTYPE,
    ALLOCVALUESNUMNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_NUM WITH HEADER LINE,
    ALLOCVALUESCHARNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CHAR WITH HEADER LINE,
    ALLOCVALUESCURRNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CURR WITH HEADER LINE,
    RETURN TYPE TABLE OF BAPIRET2 WITH HEADER LINE.
    OBJECTKEY = P_MATNR.
    OBJECTTABLE = 'MARA'.
    CLASSNUM = 'MTS_CABLE_BIN1'. "CLASS(CREATED USING CL01)
    CLASSTYPE = '023'. "CLASS TYPE (023 FOR BATCH)
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
    EXPORTING
    OBJECTKEY = OBJECTKEY
    OBJECTTABLE = OBJECTTABLE
    CLASSNUM = CLASSNUM
    CLASSTYPE = CLASSTYPE
    STATUS = '1'
    STANDARDCLASS =
    CHANGENUMBER =
    KEYDATE = SY-DATUM
    NO_DEFAULT_VALUES = ' '
    IMPORTING
    CLASSIF_STATUS =
    TABLES
    ALLOCVALUESNUMNEW = ALLOCVALUESNUMNEW
    ALLOCVALUESCHARNEW = ALLOCVALUESCHARNEW
    ALLOCVALUESCURRNEW = ALLOCVALUESCURRNEW
    RETURN = RETURN
    LOOP AT RETURN.
    WRITE: / RETURN-TYPE ,RETURN-MESSAGE.
    ENDLOOP.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    WAIT =
    IMPORTING
    RETURN =
    BY VENKAT

  • Export and import change document for user master data

    Dear Gurus,
    I have two queries on change document for user master data:
    1. Are there any approaches to export and import change document for user master data?
    We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
    2. Change document for Role change in QAS
    When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
    Could you advise this is by SAP design or are there any approaches to record this transported role change  in the role change document in QAS?
    Thanks
    YBY

    1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
    2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
    Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
    Cheers,
    Julius

  • Configuration documents for Training and event management &apprisals?

    hello xperts
    can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

    Thanks for your suggestions.
    i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS.  appraisal has to done in the ECC only.
    Done the customization like this :
    created scales
    created appraisal model and assign the scales
    for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
    Now Appraiser (Manager) from APPCHANGE complete the appraisal.
    now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
    how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
    Please help in this requirement.
    Thanks and Best Regards,
    Praneeth kumar

  • Can't display archive change documents for agreement (COND_B)

    Hello,
    I want to display archive change document for object class : COND_B (agreement) via transaction MEB3:
    The archive works fine, and I can found the archive change documents form SARA.
    (Archive Objetc = CHANGEDOCU
    Archive info structure = SAP_CHANGEDOCU2 (is active))
    But the display from the application transaction : MEB3 doesn't work.
    In the DEBUG:
    the Function module is called automatiquely: COND_B_DISPLAY_DOCUMENT
    THEN SUBMIT RSSCD100
    THEN The function module is called with the no parameter READ_CHANGEDOCU (ie with space value)
    THEN the program reads only from DB
    Question : HOW I oblige the program to read from the archive  (READ_CHANGEDOCU = 'X') ?
    I checked these SAP notes 1050935,1299903, 1308024, 1128954, 1050335
    but no results.
    May be I forgot some customizing ( SARA,, AOBJ )?
    Thanks for your help.

    Hi,
    As I understand, the change documents archived using the CHANGEDOCU archiving object are no longer available using the application object.
    Refer to Notes 1257133 and 140255 where they mention the above point.
    If you want to read change documents along with the application, then you must first archive the change documents along with the application.
    In your case, for agreements, you should use object SD_AGREEM so that the change documents also gets archived along with the agreements. Refer to note 761281 to check whether the archiving class CHANGEDOCU is already defined along with object SD_AGREEM in your system.
    Hope this helps,
    Naveen

  • Using a change document for Z table maintenance generatro to log changes

    Hi Forum,
    I have created a a change document for one of the Z tables now I want to use it in the table maintenance generator of this table so that any changes made to this table using maintenance generator are logged in table CDHDR and CDPOS.
    I am using the event 02     After saving the data in the database
    and have created a new FORM..ENDFORM for this event and it is working fine till here.
    But I am unable to find any table or structure where the information of the action performed in maintenance generator is kept for eg. what action was performed like add, delete or change and on how many records and contents of those records.
    I can update the tables CDHDR and CDPOS only if I have the above information.
    Please guide me as to where can I find all this information within the maintenenace generator program?
    Thank you,
    Anubhav

    Hello Anubhav,
    Are you calling the change document function module in your save event ? The function module needs to be first created using SCDO for your Z table, select the fields on which you want to track the changes.  Auto generate the programs for this change object. Once the FM is generated, you will have to call this FM in your SM30 event.
    The change document tracking also needs to be enabled at the data element level..
    Regards,
    Jay

  • Change documents for STXD texts

    hello,
    does someone have an idea if it is possible to create change documents for texts created/manipulated with functions from function group STXD? E.g. such texts written and edited with SAVE_TEXT, EDIT_TEXT and so on.
    it seems to me those functions do not natively support change documents....
    regards,
    anton

    Config can lock the texts showing date/time/userid for when created and not allowing change to the text that has already been saved...you can edit as I recall, adding more lines, but not modify what was already there.  This is sometimes used in QM, etc., so that there's a "trail"...

  • Displaying change documents for custom fields  in FPP2

    I have added a new subscreen to the Business partner via BUPT. The new fields are on a custom table. I have created change documents for the new fields and all that is working fine - details are being written to CDHDR/CDPOS as expected. In the standard FPP2 transaction the user can select Extras / Partner changes which will display a list of the change documents. This does not include my custom fields.
    Does anyone know if it is possible to include my custom field changes in this list? I have searched several forums but cannot find any reference to this.

    Hi,
    Fix a break-point in the following function modules and check whether you are passing custom fields
    CHANGEDOCUMENT_SINGLE_CASE
    or
    CHANGEDOCUMENT_MULTIPLE_CASE
    SAP uses the above said function modules to update change documents. Its have two import paratmeters
    WORKAREA_OLD
    WORKAREA_NEW 
    or
    TABLE_OLD          
    TABLE_NEW 
    a®

  • Table to look for change documents for users

    Hi friends,
    Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
    Thanks for you support.

    Julius
    Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
    I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
    Regards
    Colleen

  • Creation of Change document for HR Assignemnt Infotype in Transaction- CR02

    Hi,
       I have to create change document for HR Assignment in Transaction CR02.
    I have gone thru the documentation available in SAP help.
    Please help me if anybody has worked on it.
    Thanks & Regards,
    Alok.

    Hi Raja,
    I didn't quite understand what you mean by creating/changing data using transaction codes, because within SAP MDM 3.0 you are in a portal environnment and don't work with transaction codes.
    General remark: Information on the up-to-date MDM 5.5 is provided in the Service Marketplace. For an overview of MDM 5.5, see also http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/mdm/capabilities provided with sap mdm 5.5.pdf.
    Kind regards, Markus

  • I woke up this morning and my Bookmarks is working different.  Has a setting changed, or did Apple change it for me and how do I get it back?????????

    I woke up this morning and my bookmarks are functioning different, and the tool bar has changed.  Instead of opening the bookmarks in a page on Safari, I get a menu on the side of the page.  Then I have to go click on the bookmark icon again to get rid of the menu.  Has a setting changed or did Apple change it for me and how do I get it BAAAAAAACK????????????

    The first G4 models were basically a repackaged/upgraded G3 & came in 350 & 400MHz models. This design was called PCI version. The next G4 models were AGPs. This link http://www.everymac.com/systems/apple/powermac_g4/index-powermac-g4.html has the specs/pictures of all the G4 models.
    Power Mac G4: How to Differentiate Between Models
    http://docs.info.apple.com/article.html?artnum=58418
    Power Mac G4: How to Differentiate Between Models (Part 2)
    http://docs.info.apple.com/article.html?artnum=42739
    Using these links, you should be able to determine which model you have.
    Removing the battery causes all settings in the internal memory to be reset, just like resetting the PMU/CUDA. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
     Cheers, Tom

  • Change documents for created for Customer Master

    An existing program makes changes to the Customer master table KNA1. The changes are made at the table level using the UPDATE command. Since the changes are being made at table level, the change documents are not created.
    I need to create IDocs for all changes. So the question is, how to create change documents for changes to the particular fields being UPDATEd in the report program.
    I understand that a BDC program on XD01 screen should have been the best way for this, but I'm here to break-fix and trying to identify solutions with least development effort.

    Hi ganadeep,
    When an application makes any changes to an object it wrties change documents which are stored in the table CDHDR and CDPOS for each change made.
    BDCP table holds the change pointers which point to the change documents in the  CDHDR table.
    Regards
    Parag

Maybe you are looking for