View Characteristics Value in COOIS

Hi,
Is there a way where I can view the characteristics value for the Production Orders using COOIS?
Thanks.
Cheers,
Sue

Hi,
I have a few characteristics I would like to see, let's say SIZE and DIMENSION which is in the configuration of the Production Order.
Is that possible?
Pls advise.
Thanks.
Cheers,
Sue

Similar Messages

How can I reduce the selection for the characteristics value in a BW query

Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSC

hi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva

How to find the list of material variant based on the characteristics value

Hi
We are creating materials variants for FERT Material Type in material master in MRP-3 view .There we configure the variant by attaching characteristics value
Now we want to have a report , which can give the list of material variants , if char value is given in selection
Can somebody guide me if there is standard report for this OR what is the linkage in Table , so that we can develop a report
rgds
Sandeep

I couldn't find a standard report to get the material variants based on characteristic values (the nearest I could find was CT12) but I wrote a report some time back here's the table join logic for the main select statement.
select a~matnr
        e~atwrt
        h~atwtb
into table i_tab
      from MARC as a
      inner join IBIN as b
      on b~instance eq a~cuobj
      inner join IBIB as c
      on c~ibase eq b~ibase
      inner join IBINVALUES as d
      on d~in_recno eq b~in_recno
      inner join IBSYMBOL as e
      on e~symbol_id eq d~symbol_id
      inner join CABN as f
      on f~atinn eq e~atinn
      inner join CAWN as g
      on g~atinn eq e~atinn
      and g~atwrt eq e~atwrt
      inner join CAWNT as h
      on h~atinn eq g~atinn
      and h~atzhl eq g~atzhl
     where     a~matnr in s_matnr
            and e~atinn in s_atinn
            and e~atwrt in s_atwrt
           and b~valto eq '99991231235959'. "This is important condition
I included bare minimum fields to suite your requirement needs you can add whatever other field you want . Though I tested the table join, I suggest you to test it again before writing your own ABAP program using SE16N.

Where we maintain the cost of characteristics values in variant conf.

Hello guys,
This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
    Actually i am unable to understand how costing takes place in variant configuration.
    Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
    Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
     Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
   So where to maintain the prices of these characteristics values?
        Plz guide.

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

Picking or copying Characteristics Value from material master

Dear Experts,
Please i create five Characteristics which i assign to a Class ( of type 022 ). The Class is then assigned to materials in the classification View of the Material Master.
I want one of the five Characteristics to copy its values from specific parameter value maintaned in the Material Master.
Please assist on how to accomplish this?
I did the following but did not get the desired results; While creating this Characteristic, in the Values Tab, I filled ''MARC'' in the Tablename field & in the Fieldname field, i enter the technical fieldname of the particular field from table MARC which i want.
I want this particular value to be automatically copied into the Characteristics Value field in the Foreground for eacb batch anytime Goods Receipt is done.
after doing this, anytime Goods Receipt is done & a batch number generated, it takes me to the Classification screen, but this particular field which i desire to be auto updated remains blank.
Please assist ?

Hi,
1. This will not automatically updated just as we wil fill the addtional date table and field.
2. you need to write the object dependency to get it updated when you call somewhere
3. Generally in the batch level you will be able to do this .( even you can use function / object dependency )
Reg
Dsk

Same Batch Number with different characteristics value

Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation      Batch number               batch Class               Length     width     Diameter
1                        1000                              022                              100        50             20
2                        1000                              022                              120        25             10
3                        1000                              022                              150        70             30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
Vimal

Dear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds,

Hi experts , regarding finding characteristics values for BOM

We have requirement to retrieve classification data which is used for BOM components in CV03N .
If anyone knows the function module which retrieves the characteristics values of that class, reply me.
CLAF_CLASSIFICATION_OF_OBJECTS using this i am retiving characterisics assosiated with material.
I want for BOM.

Hi,
Hint: any field y want to chk, follow these steps.
Goto Se11 -- in table view --- Entry help / check table --- go to this tables if avaliable.
Hope this will help you a lot.
Jogdand M B

Enable/Disable Characteristics value assignment during Configuration in SD

Hi,
I have a sales order which has to be configured using Variant Configuration.
During the configuration process, I want to restrict the value assignment by classes. Meaning I have 2 classes - one for GRP1 and another for GRP2.
During creation of sales order, I give the sales ppl authorization to class for GRP1, which allows them to do characteristics value assignment for all the characteristics in the class called GRP1. The other users are not allowed to change any values assigned in GRP1 but they can view the info in GRP1, these users can only configure whatever characteristics in GRP2.
I tried using authorization object C_TCLS_MNT.
Mentioned in the SU21,
C_TCLS_MNT Authorization for Characteristics of Org. Area object can be used.
Actvt : 23 Maintenance of characteristics for org. area allowed , any other value Display area only characteristics for org.
However, I am unable to assign any other value other than 23. It mentioned that any other value is Display but I am unable to assign the other value.
It seems to be that C_TCLS_MNT is not working. Even when I do not assign C_TCLS_MNT (disable it) but using C_TCLS_BER (with org area), it allows user to do everything (display and change).
Pls help.
Thanks.
Cheers,
Sue

> I tried using authorization object C_TCLS_MNT.
> Mentioned in the SU21,
> C_TCLS_MNT Authorization for Characteristics of Org. Area object can be used.
> Actvt : 23 Maintenance of characteristics for org. area allowed , any other value Display area only characteristics for org.
>
> However, I am unable to assign any other value other than 23. It mentioned that any other value is Display but I am unable to assign the other value.
Please assign the value as ' ' (Single space included within single quote) to use "Any other value" option.
The other Objects can be used here are:
C_CLMM          CLAS     Mass Processing of Classifications
C_TCLA_BKA     CLAS     Authorization for Class Types
C_TCLS_BER     CLAS     Authorization for Org. Areas in Classification System
C_TCLS_MNT     CLAS     Authorization for Characteristics of Org. Area
Please check how many of these are present for the TCode you are using in TCode SU24 as Check/Maintain (or Check Indicator = Check & Proposal = Yes : If you are in ECC).
The activity 23 means "maintain"
Regards,
Dipanjan

From which table characteristics value is been picked in Batch(023 class)

Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification screen , characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
Siddhrtha

Hi
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Regards

From which table characteristics value of Batch management is been picked

Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification button , there characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
Siddhrtha

Hi Merwyn,
I cannot find any common field between AUSP and MCH1 ,could you tell me the procedure to link these 2 tables.
Thanks N Regards
Siddhartha Chatterjee
Hi,
Using AUSP table pick the object No. and link it with MCH1 to find the Batch No.
using the batch No. link to MSEG-CHARG

How to populate read only input field or text view form value help only

Hi experts,
I have one requirement to populate a read-only field or text view from value help.
User cant put any value there.value comes only from the value help.
For example,
when we read context using Code Wizard,we cant type any value there.value only comes from value help.
How to implement that functionality?
Please reply.
Thanks in advance,
Subhasis.

Yes it is possible.
1.Create a context Attribute and then bind this attribute to the Text view UI element.
2. read context attribute and then set value to the context attribute like this way.
DATA:
    elem_context1                        TYPE REF TO if_wd_context_element,
    stru_context1                        TYPE if_first=>element_context ,
    item_potxt                          LIKE stru_context-potxt.
get element via lead selection
elem_context1 = wd_context->get_element( ).
stru_context1-potxt = 'PO'.
elem_context1->set_attribute(
    VALUE = stru_context1
    name   = 'POTXT'
thanks
Suman
Edited by: suman kumar chinnam on Sep 9, 2008 12:12 PM

Transfer of characteristics values from material variant to its subordinate

Gurus
Need your Expert opinion on Variant configuration
We are using Multi level Material Variants and our bussiness process demands for configuration of These Material variants in Transaction MD81 and during creation of Sales order .These configuration will not affetc the BOM explosion but will only be passed to the The lower level components (Which are again theMulti level Configuriable Material variants ) as manufacturing instructions .To Enable these Flow of Characterisitcs we have Applied a Note which allows the Multi level Configuration of Material Variants and Pass this Values to lower Level and the characteristics value flow is visible as well for lower level from CU50 ,but when i create the requirement through CIR or sales order and Configure the Material Variants and Generate the Procurement Proposals to fullfill these requirements (MD02) in the form of Planned order we are unable to pass one the Characterisitcs values to planned orders of lower level Components of Material Variants .These characterisitc values are Used as Manufacturing Instructions and should be passed on to the Lower level of Material Variants through the use of dependencies in Configuration profile .but the problem is it works in CU50 and does not flow in planned orders , does any body have a solution for this ?
Thanks In Advance
awaiting reply
Milind

Hi Milind,
I check that you implement a Note which allows the Multi level Configuration of Material Variants? is it sap note? mind to share the number.
I ever faced this problems to before but fortunately the case in simpler so i just create another variant and maintain the component for the variant. For example : characteristic color. I create variant with color red black etc. For variant red, maintain component red. For variant black maintain component black, so on. Is it possible for your case?
Regards,
Arman

Mass Upload of object dependency for characteristics value

Hi ,
I need to upload the object dependency for characteristics values through transaction CT04. My input data consists of characteristcs name , characteristics value and the object dependency (KNNAM) . Need to populate the KNNAM field alone .
Have tried with the FM 'CTMV_CHARACT_CHANGE_KNOWL_VAL' which suits my requirement but teh dependencies are not getting uploaded . Am I missing anything ? Since I do not have class details i.e class num and class type I am not able to use the BAPI like 'BAPI_CLASS_CHARVALUE_LOCAL_DEP ' . Please suggest any othe r suitable method .
Thanks in advance.
Sanjeev

Hi,
Please check the below link..
BAPI for Characteristic Dependency
Thanks.

How to change characteristics values in PPDS planned order?

Hi,
I have few PPDS planned orders. I want to change the value of few characteristics of existing PPDS planned order.
How can I do the same?
Any standard T.Code or function module or report available to update the characteristics values of PPDS planned order in APO.
Thanks in advance.
Warm Regards,
Surajit Das

Hi Surajit,
Char can be changed programatically.
If you want to change the Planned Order characteritics before its creation, you can do so at the time Planning run itself (/SAPAPO/RRP3) in BADI /SAPAPO/RRP_SRC_EXIT, Method RRP_USEX_PLORD_CREATE.
Planned Order characteritics can be changed after it creation.using BAPI BAPI_MOSRVAPS_SAVEMULTI3.

View Characteristics Value in COOIS

Similar Messages

Maybe you are looking for