View connected clients?

Am I able to view all the connected clients on my AEBS at any time?

You can view connected clients via the AirPort Utility. (ref: AirPort Utility > Select the AirPort > Manual Setup > Advanced > Logging & Statistics > Logs and Statistics > Wireless Clients or DHCP Clients tabs)

Similar Messages

Where to view connected clients

With a TimeCapsule router, how do I view connected clients?

Via the AirPort Utility. (ref: AirPort Utility > Select the TC > Manual Setup > Advanced > Logging & Statistics > Logs and Statistics > Wireless Clients or DHCP Clients)

Remote Desktop Connection Client 9.3.9600 unable to connect to Server 2012 RDS via Gateway

Hi,
I have a Windows Sever 2012 R2 RDS environment with two Gateways servers configured in high availability mode (RD Web Access, RD Gateway, RD Connection Broker roles installed) and four Windows Server 2012 R2 RDS Session Hosts. The servers are all running
the most recent public server updates. With this configuration I when connecting externally using a Windows 7 computer with the older Remote Desktop Connection client (6.1.7601) I am able to connect without any problems however when I try connecting with a
newer client from a computer running Windows 8.1 and the 9.3.9600 client I am unable to connect.
At the moment a NAT rule is configured to pass 80/443 traffic to only one of the RDS gateway servers, I've removed our load balancer from the configuration for the moment to reduce the complexity.
No error is generated by the client when it tries to connect it just stops trying to connect after a while.
On the Gateways servers event logs for
Things I have looked into so far.
- I've double and triple checked the RDS configuration and checked it against one of my other clients configurations that is working and they are identical.
- Connecting from an older client version works fine.
I'm not sure what else can be checked does anyone have any ideas?

Hi,
1. What entries are you seeing in the RD Gateway's log? Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Gateway
2. How come you are not forwarding UDP port 3391 in addition to TCP port 443? It should work without UDP, but you will not have UDP support which is one of the benefits of RDP 8.0/8.1.
3. Are there any non-default group policy settings being applied to the servers and/or client PCs? To be clear, I'm asking if any changes have been made to the default local and domain security policies, group policy objects, new GPOs that may have
been added, etc., that are applicable to the servers and or client PCs.
-TP

How to get the information like IP address,Host name of connected clients v

Hi Every one,
I want to get the information like (IP Address,Hostname,Active sessions , Database Server.etc) of the connected clients
via V$Views(ORACLE).
And then I like to load these infromation into a table Client_Table.
Could some one give me suggestion that which V$ views/method I use in order to get the above information and then
how to load these information into a table Client_table?
Your suggestions will be highly appreciated.
With Regards
BILAL

You could use a LOGON TRIGGER so every session insert its own environment into your client_info table.
You could use the following view and choose whatever attribute you need:
create or replace view my_userenv (
AUDITED_CURSORID ,
AUTHENTICATION_DATA ,
AUTHENTICATION_TYPE ,
BG_JOB_ID ,
CLIENT_IDENTIFIER ,
CLIENT_INFO ,
CURRENT_SCHEMA ,
CURRENT_SCHEMAID ,
CURRENT_SQL ,
CURRENT_USER ,
CURRENT_USERID ,
DB_DOMAIN ,
DB_NAME ,
ENTRYID ,
EXTERNAL_NAME ,
FG_JOB_ID ,
GLOBAL_CONTEXT_MEMORY ,
HOST ,
INSTANCE ,
IP_ADDRESS ,
ISDBA ,
LANG ,
LANGUAGE ,
NETWORK_PROTOCOL ,
NLS_CALENDAR ,
NLS_CURRENCY ,
NLS_DATE_FORMAT ,
NLS_DATE_LANGUAGE ,
NLS_SORT ,
NLS_TERRITORY ,
OS_USER ,
PROXY_USER ,
PROXY_USERID ,
SESSION_USER ,
SESSION_USERID ,
SESSIONID ,
TERMINAL
) AS SELECT
SYS_CONTEXT ('USERENV', 'AUDITED_CURSORID') ,
SYS_CONTEXT ('USERENV', 'AUTHENTICATION_DATA') ,
SYS_CONTEXT ('USERENV', 'AUTHENTICATION_TYPE') ,
SYS_CONTEXT ('USERENV', 'BG_JOB_ID') ,
SYS_CONTEXT ('USERENV', 'CLIENT_IDENTIFIER') ,
SYS_CONTEXT ('USERENV', 'CLIENT_INFO') ,
SYS_CONTEXT ('USERENV', 'CURRENT_SCHEMA') ,
SYS_CONTEXT ('USERENV', 'CURRENT_SCHEMAID') ,
SYS_CONTEXT ('USERENV', 'CURRENT_SQL') ,
SYS_CONTEXT ('USERENV', 'CURRENT_USER') ,
SYS_CONTEXT ('USERENV', 'CURRENT_USERID') ,
SYS_CONTEXT ('USERENV', 'DB_DOMAIN') ,
SYS_CONTEXT ('USERENV', 'DB_NAME') ,
SYS_CONTEXT ('USERENV', 'ENTRYID') ,
SYS_CONTEXT ('USERENV', 'EXTERNAL_NAME') ,
SYS_CONTEXT ('USERENV', 'FG_JOB_ID') ,
SYS_CONTEXT ('USERENV', 'GLOBAL_CONTEXT_MEMORY') ,
SYS_CONTEXT ('USERENV', 'HOST') ,
SYS_CONTEXT ('USERENV', 'INSTANCE') ,
SYS_CONTEXT ('USERENV', 'IP_ADDRESS') ,
SYS_CONTEXT ('USERENV', 'ISDBA') ,
SYS_CONTEXT ('USERENV', 'LANG') ,
SYS_CONTEXT ('USERENV', 'LANGUAGE') ,
SYS_CONTEXT ('USERENV', 'NETWORK_PROTOCOL') ,
SYS_CONTEXT ('USERENV', 'NLS_CALENDAR') ,
SYS_CONTEXT ('USERENV', 'NLS_CURRENCY') ,
SYS_CONTEXT ('USERENV', 'NLS_DATE_FORMAT') ,
SYS_CONTEXT ('USERENV', 'NLS_DATE_LANGUAGE') ,
SYS_CONTEXT ('USERENV', 'NLS_SORT') ,
SYS_CONTEXT ('USERENV', 'NLS_TERRITORY') ,
SYS_CONTEXT ('USERENV', 'OS_USER') ,
SYS_CONTEXT ('USERENV', 'PROXY_USER') ,
SYS_CONTEXT ('USERENV', 'PROXY_USERID') ,
SYS_CONTEXT ('USERENV', 'SESSION_USER') ,
SYS_CONTEXT ('USERENV', 'SESSION_USERID') ,
SYS_CONTEXT ('USERENV', 'SESSIONID') ,
SYS_CONTEXT ('USERENV', 'TERMINAL')
from dual;

Is there a utility to manage/view connected devices to my Apple Airport Extreme from my mac?

MacBook Air 13"
1.7ghz i5
4gb ram
128 ssd.
Latest version of mac os x and all software up to date.

AirPort Utility is located Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
You can view connected wireless devices by clicking directly on the word Wireless Clients
DHCP Clients will display all connected devices both wired and wireless
What other actions do you need to perform?

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Hi,
I need some guidance here, please.
I have some questions about replication:
When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Is possible to automate the failover process? Just like happens in a cluster.
What changes do I need to do in order to guarantee that my clients reach my replica? For example, I need to do a failover to my Exchange Server Replica and I need to minimize the downtime. The same applies for a DC or a SharePoint Server
  Thanks in advanced.

Hi efebo,
“The same applies for a DC ”
As for replicating virtualized DC (Personally,  I do not suggest to replicate DC , even though it can be replicate ), please refer to following link:
http://technet.microsoft.com/en-us/library/dn250021.aspx
"In short, Exchange does
not support the Hyper-V Replica feature. Exchange has a long history of supporting virtualisation from
Exchange 2003 onwards. It is fully supported to install Exchange
2007,
2010 or
2013 as a virtual machine on Hyper-V, but using the Hyper-V replica feature is not supported.
For details please refer to following link:
http://blogs.technet.com/b/rmilne/archive/2013/07/29/exchange-and-hyper-v-replica-support.aspx
I assuming that the "Remote DR site" and the primary site both have public IPs .
Based on my knowledge you can not access replica site VM  directly after a disaster , maybe you need to rebuild primary site and replicate VM back .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot open dashboard from connected client to restore a single file

I have a small business network with an existing Server 2008 R2 domain controller. In order to backup all the client machines with an experience something like windows home server I recently purchased a new server with windows server 2012 r2 and
installed the essentials role.
I'm able to connect client machines (running windows 7) to the new server and get them to backup. I assume (but have not yet tested) that I would be able to do a full image restore by creating a client restore bootable usb key and booting a client from
that, but first I'd like to be able to browse the files in a client backup and restore a single file rather than the full image. It seems that the only way to do that is to run the dashboard as a remoteapp from the client, but when I try that I get this
error:
I thought that I might need to add the remote desktop services role. So I tried doing that and publishing the dashboard as a remoteapp, but the error still appears. Even if that fixed the problem, though, I would be concerned that would mean we
needed RDS CALs for each client which seems like overkill just for the ability to restore a single file from a backup.
So, is there any other way to get to the dashboard or otherwise restore files onto a client?
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights.

Um, well looky here :)
https://social.technet.microsoft.com/Forums/windowsserver/en-US/cf6abdeb-a517-424c-bbef-050bee22a658/remoteapp-error-when-launching-dashboard-from-client-pc?forum=winserveressentials
Grey
PS: Has nothing to do with the price of eggs, but interesting ?
http://www.windowsnetworking.com/articles-tutorials/netgeneral/host-remoteapps-windows-pcs-part1.html

Converting from a Business View connection to a non-Business View Error

I have CR 2008 report with SP1. The report has a sub report. The main report is based off of a BV but the sub report is using an ODBC connection. When I try to update the ODBC connection I recieve an error message telling me that:
Quote:
"Converting from a Business View connection to a non-Business View connection is not supported."
I am do not want to update the BusinessView just the ODBC connection for the subreport.

Hi Michael,
When you try to update both the Business views and ODBC connection you will be prompted for those errors.
You need to break the link in the report and update the connections individually.
Thanks,
Naveen.

Converting from a Business View connection to a non-Business View connectio

I have a report on our Crystal Reports Server that I need to move to a machine with Crystal Reports XI installed and no connection to the Business Objects Server.
When I create an ODBC connection pointing to the same table and then try to use Set Datasource Location to Update the Data Source I get an errormessage:
Converting from a Business View connection to a non-Business View connection is not supported.
What can I do? It is a complex report that I don't want to take the time and energy to rewrite.
Thank You for any answers.
<a href="http://farm4.static.flickr.com/3234/2942702182_72365cc04f_o.jpg">Screen Shot</a>

Hello Brundibar,
I recommend to post this query to the [Universe Designer and Business Views Designer|Semantic Layer; forum.
This forum is dedicated to topics related to the universes and business views.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Universe Designer and Business Views Designer queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

How to Install VPN and how to connect client Application server

Hi All,
Could any one tell me. How to connect Client's Application server and How to Install VPN. Thanks in advance.......
Thanks & regards
Vardhan

where r u working?
ask your help desk to give the URL link to down load vpn
after downloading install it, its just like a wizard
you need to give your userid and password , and secureid number
secureid is a small device which displays a number(say a 6 digit number ) this number is keeps on changing for every one minitue.
you need to enter the number which is displaing while you are trying to connect to vpn.
in the middle of connecting to vpn if your secureid number changed , you need to login once again by the same procedure

How to connect Client to server in SAP B1 8.8

Hi All,
how i can connect client with other server in sap B1 8.8
Plaese tell me the way
Thanks

You may check these threads:
Re: XL Reporter and SQLEXPRESS: unable to connect to XL Reporter
Re: 8.8 Annoying licence-server switching
Thanks,
Gordon

Missing "View|Application Navigator" and "View|Connection Navigator"

My default Oracle JDeveloper 10g Early Access 10.1.3.34.12 is missing "View|Application Navigator" and "View|Connection Navigator" from the View toolbar. Am I simply missing an additional installation or do I not have something configured correctly?
Thanks,
Scott

Thanks for the answer, that's exactly what it is. I'm new to this environment and had it installed for me, hence I didn't see the differences at the download choosing time. Thanks again.

My simple chat server does not send messages to connected clients

Hi!
I´m developing a chat server. But I can not get it work. My client seems to make a connection to it, but my server does not send the welcome message it is supposed to send when a client connects. Why not?
removedEdited by: Roxxor on Nov 24, 2008 10:36 AM

Ok, I solved my previous problem and now I have got a new really annoying one.
This is a broadcasting server which meand it can handle multiple clients and when one client sends a message to the server, the server should broadcast the message to all connected clients. It almost works, except that the server just sends the message back to the last connected client. The last connected client seems to steal the PrintStream() from the other clients. How can I solve that?
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.lang.Character;
import java.io.OutputStream;
import java.util.Vector;
public class ChatServer extends MIDlet implements CommandListener, Runnable
     private Display disp;
     private Vector connection = new Vector();
     private TextField tf_port = new TextField("Port: ", "", 32, 2);
     private Form textForm = new Form("Messages");
     private Form start_serverForm = new Form("Start server", new Item[] { tf_port });
     private Command mExit = new Command("Exit", Command.EXIT, 0);
     private Command mStart = new Command("Start", Command.SCREEN, 0);
     private Command mDisconnect = new Command("Halt server", Command.EXIT, 0);
     ServerSocketConnection ssc;
     SocketConnection sc;
     PrintStream out;
     public ChatServer()
          start_serverForm.addCommand(mExit);
          start_serverForm.addCommand(mStart);
          start_serverForm.setCommandListener(this);
          tf_port.setMaxSize(5);
          textForm.addCommand(mDisconnect);
          textForm.setCommandListener(this);
     public void startApp()
          disp = Display.getDisplay(this);
          disp.setCurrent(start_serverForm);
     public void pauseApp()
     public void destroyApp(boolean unconditional)
     public void commandAction(Command c, Displayable s)
          if(c == mExit)
               destroyApp(false);
               notifyDestroyed();
          else if(c == mStart)
               Thread tr = new Thread(this);
               tr.start();
          else if(c == mDisconnect)
               try
                    sc.close();
               catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
               destroyApp(false);
               notifyDestroyed();
     public void run()
          try
               disp.setCurrent(textForm);
               ssc = (ServerSocketConnection)Connector.open("socket://:2000");
               while(true)
                    sc = (SocketConnection) ssc.acceptAndOpen();
                    connection.addElement(sc);
                    out = new PrintStream(sc.openOutputStream());
                    textForm.append(sc.getAddress() + " has connected\n");
                    ServerToClient stc = new ServerToClient(sc);
                    stc.start();
          catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
          catch(NullPointerException err) { System.out.println("NullPointerException error: " + err.getMessage()); }
     class ServerToClient extends Thread
          String message;
          InputStream in;
          SocketConnection sc;
          ServerToClient(SocketConnection sc)
               this.sc = sc;
          public void run()
               try
                    in = sc.openInputStream();
                    int ch;
                    while((ch = in.read())!= -1)
                         System.out.print((char)ch);
                         char cha = (char)ch;
                         String str = String.valueOf(cha);
                         out.print(str);
                         //broadcast(str);
                         textForm.append(str);
                    in.close();
                    //out.close();
                       sc.close();
               catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
}

Always Connected Client

Hi Experts,
I am getting started with the Netweaver Mobile - always connected
is there any client to install on my PDA .... isn't it the same as occasionally connected or it is different??
please clear it to me

Hi Ahmed,
Occasionally connected clients and Always connected clients are different.
Always connected clients enables the users to directly access the business application online using mobile devices such as pocket PCs and Blackberry wireless handhelds.
You can refer the below link to get more details on always connected clients.
https://www.sdn.sap.com/irj/sdn/nw-mobile?rid=/webcontent/uuid/20ffed54-9812-2a10-9fb5-cb973a37ba3b#section4 [original link is broken]
For Occasionally connected client, please refer this link.
SAP NetWeaver Mobile [original link is broken]
Regards,
Dhanya
Edited by: Dhanya K Moni on Dec 10, 2009 6:51 AM

How to connect client database to server database

please provide me the steps that how to connect client database to server database in oracle 10g i am getting error ORA-12560 TNS:Protocol adapter error.

Why don't you search in this forum ???? There are many link which would help
ORA-12560 adapter error, connecting to remote database
ORA-12560: TNS:protocol adapter error
How to solve ORA-12560:TNS:protocol adapter error?
ORA-12560: TNS: protocol adapter error

View connected clients?

Similar Messages

Maybe you are looking for