View CR in Interactive mode

Hi,
Can anyone tell me if we can view a Crystal Report in infoview in interactive mode just like viewing a webi report in interactive mode. I have changed the mode to interactive under webi in InfoView preferences, but there is nothing like that for CR. Can any one help me in having this feature for a CR. My client wants to view CR in a interactive manner.
Ash

Hi Ash,
Basically no. Only options you would be able to give them would be Parameters to alter the results and then refreshing.
If you have a Developer available you could write your own interactive Report Viewer using the Report Application Server ( RAS ) in either .NET or Java. There is nothing SAP BOE ships for CR.
Thank you
Don

Similar Messages

Want to view Webi report in interactive mode in EP

Hi,
I am currently doing BO Integration with SAP 7.0. I have done the Integration successfully & have imported roles. Our requirement is that the reports needs to be viewed in EP. I have done the EP portal integration as per the installation document. I can view my CR & webi reports from portal. But my client wants to view the webi reports in Interactive mode as he views in BO Infoview 3.1. I can't find any work around for this.. can anyone help me in viewing the webi report in interactive mode inside EP.
Right now am viewing the report in html format, which is the default, (report viewer.do). Is there any functionality or other viewer name to make my requirement possible
I have installed SAP BO 3.1 & BO Integration Kit 3.
Any help will be greatly appreciated..
Thank you,
Ash

Hi,
you can integrate the viewing of Web Intelligence using OpenDocument or using the KM Integration. The type of the viewer then depends on the user preferences configured in InfoView.
ingo

GetURL issue on browser "interactive" mode

Hello all.
I'm having a hard time to show a webpage back on the browser,
after getURL is triggered to get it.
The environment is the following: Nokia N95, S60 3rd
Edition's web browser, Flash Lite 2.0.
Opening the mobile browser, I have a XHTML page, with a link
to a SWF. Upon clicking on it, the browser opens the Flash
Lite SWF properly (in the browser context - as opposite to
standalone - or more correctly even: "
interactive mode")
I'm seeing my very simple Flash application and I have a link
in a getURL on a movieclip
(see the code attached below)
Now, I know page is being accessed by the mobile browser in
the background - once i click the on the clip. However I can't see
it because my Flash Lite app is still visible on the screen.
How can I get to see the web page for which i called with
getURL in Flash?
Trying to come up with a solution, quitting the player by
adding fscommand2("quit"); right after the getURL call, seems to
immediately prevail as it actually closes the player, but doesn't
open the page before.
Does this means that it is not possible to click an object in
flash lite and view a webpage, when the player has been loaded in
browser context, rather than standalone?

Thanks for your reply dietmar.
In my case I wish to have different links with different
URLs.
Say like 3: one for homepage, other for favorites and a last
one for user profile for example.
Whenever the user would push a distinct button, it should
open a distinct URL.
In your solution you will still need to close using
fscommand("Quit");
which represents another new click. The user should not need
to think that he must close Flash in order to actually view the
page that the browser has loaded in the background.
Someone, Adobe or Nokia should be responsible to handle this
faulty behavior. But my first guess would be that it is a Flash
Lite Bug.
Also I am not able to pass JavaScript commands via Flash Lite
2.0 getURL function, to the S60 3rd ed. browser. Note that this
browser can handle window parameters like "_blank". I was able to
simulate the behavior I wanted with XHTML and JavaScript.
Unfortunately not with Flash Lite 2 and XHTML.

Screen Pop a View in New Query Mode

I am doing a Siebel screen pop customization and am having trouble figuring out how to open my desired view in query mode when the call comes in. I have specified my BusComp and BusObj as well as my SingleView in the custom EventResponse but am not sure where and how to specify the mode which I want the view to open in.
Anyone know how to do this?
Thanks in advance!

Thank you Fuzii,
I am a Siebel newbie and am trying to figure out how to do a few things with custom screen pops.
My EventResponse looks like this:
[EventResponse:AnsweredInboundCall]
QueryBusComp = "<busComp>"
QueryBusObj = "<busObj>"
QuerySpec = "[<fieldName>] = '{<variableName>}'"
SingleView = "<viewName>"
So the specified view will show when there is a match on the variableName. In case that variable is empty or a match is not found, then I would like to have the view open in query mode. I am doing this directly in the Siebel Admin Configuration but it doesn't seem that there is a way to tell the applet which mode to open in here.
If I set the Auto Query Mode to 'New Query' in Siebel Tools, will my specification for SingleView in EventResponse override it and show the view with that record found?
Thank you for the help :)

Sharing a view in read only mode

Hi,
I am new in this domain. I have made an application in which I made two local development projects. Through that I am using views of one into another with the help of "Used WebDynpro Components" concept. After deploying, I have got these two views.
But the problem is that I want that view in read only mode which I have taken from other local development project and this view was not in read only mode in its local development projects.
Please provide me the solution in detail so that I can understand easily.

Hi Manish,
Say View1 is the view in main Component,View2 is the view in used Component. Exactly follow these steps.
Create a context attribute enable of type String in used Component's controller,used Component's Interface controller, View1 and View2.
Using context mapping map these attributes View2 -> used Component's controller-> used Component's Interface controller -> View1 ( if you don't know how to map double click the the Main component: Data navigation modeler is opened; In the diagram, right side select small arrow first select View1 drag to used Component's Interface controller,in the wizard select right hand side enable attribute drag to left side)
you can map similarly View2 -> used Component's controller-> used Component's Interface controller.
In View2 create another variable edit of boolean type.
Open Layout tab of View2, bind this attribute to enable property of all the UI elements which you want to disable.
In implementation tab of View1 in method wdDoInit() write this code
wdContext.currentContextElement.setEnable("display");
In implementation tab of View2 in method wdDoInit() write this code
if(wdContext.currentContextElement.getEnable().equalIgnoreCase("display"))
wdContext.currentContextElement.setEdit(false);
else
wdContext.currentContextElement.setEdit(true);
Hope this helps for you.
Best regards,
Siva
Message was edited by:
Armin Reichert

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

Chrome, Mountain Lion and Full Screen Interactive Mode

I'm running into an issue when entering Full Screen (Interactive) Mode-- long story short, the Message and "Allow" button are over-magnified and don't appear on the screen for me to click, thereby making it impossible to use other keystrokes (and see certain things in the interactive game window t'boot).
This issue does not exist in Snow Leapord on an older machine, though the same updated versions of Chrome (and assumedly Flash Player) are at work there.
Any suggestions on something I can tweak-- or even a work-around/hotkey for Allowing FSI Mode?
The actual game screen itself is fine, albeit slightly cut off around the edges.

Man, do you have Sophos antivirus? If that so, you need to uninstall it the right way:
For Sophos Anti-Virus for Mac OS X version 7.x , go to Macintosh HD|Library|Sophos Anti-Virus.
Select 'Remove Sophos Anti-Virus.pkg'.
Follow the instructions on the screen.
NOTE, if you are running Sophos Anti-Virus for Mac OS X version 4.x, the path in step 1 is Macintosh HD|Library|Application Support|Sophos Anti-Virus.
It seems that Sophos antivirus is crashing ML. They have an update but I'll wait some time becuase I've really had a painful time these days.

Download of saved views of an interactive report

Hi all
When I am on a saved view of an interactive report and choose 'Download', I always get the data of the actual worksheet but not that form the saved report.
Has anyone a solution of this problem?
best regards
Gerhild

Hi Dan
that posting contains a good deal of information about REPORT_ID of an IR on rebuild environment or updating application, but nothing about saving IRs to file.
But in the meantime I detect the following issues:
1. using the Repot Id Item of Advanced Attributes, you get the behavior I had described above.
2. if you keep Repot Id Itemr of Advanced Attributes clean, the current view of the IR is downloaded to the file.
3. Therfore I thing, that the given REPORT_ID in the Item set in Repot Id Item of Advanced Attributes is only saved once, when loading the page, but not when the current view is changed by asynchronous javascripts (AJAX function apex.worksheet.ws.pull). But the funktion for downloading data of IR (apex.worksheet.ws.download ? - body of function is emty) uses the content of that item obviously.
I had a look at that scripts, but don't found the link between a variable of javascript and the Repot Id Item. For this reason I wasn't able to check this by eding the javascript of APEX; but I think this will be the only way to get the expected behavior.
Best regards
Gerhild
Edited by: gaselmeyer on Aug 27, 2009 1:08 PM

CRIO application works in interactive mode but broken VIs reported in error log when run built application on target

I have been getting more than my fair share of grey hairs the past few days because of this. Over the past few months this almost never happened. Lately, after a seemingly minor change to some serial communications code, hardly a single build works without throwing errors like this:
#OSVers: 6.3
#OSBuild: Jun 6 2014, 09:14:16
#AppName: /c/ni-rt/system/lvrt.out
#Version: 14.0
#AppKind: AppLib
#AppModDate:
InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
InitExecSystem() call to GetNumProcessors() reports: 1 processors
InitExecSystem() will use: 1 processors
starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507679466.00933790, (19:24:26.009337710 2015:02:24)]
starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507679470.59560204, (19:24:30.595601929 2015:02:24)]
starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507679481.25993776, (19:24:41.259937648 2015:02:24)]
Thread consumption suspected: 3 Try starting 4 threads
starting LabVIEW Execution System 2 Thread 4 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 5 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 6 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
starting LabVIEW Execution System 2 Thread 7 , capacity: 24 at [3507679515.59324312, (19:25:15.593243004 2015:02:24)]
Thread consumption suspected: 8 Try starting 1 threads
starting LabVIEW Execution System 2 Thread 8 , capacity: 24 at [3507679515.73854351, (19:25:15.738543576 2015:02:24)]
and
#Date: TUE, FEB 24, 2015 04:47:22 PM
#OSName: VxWorks
#OSVers: 6.3
#OSBuild: Jun 6 2014, 09:14:16
#AppName: /c/ni-rt/system/lvrt.out
#Version: 14.0
#AppKind: AppLib
#AppModDate:
InitExecSystem() call to GetCurrProcessNumProcessors() reports: 1 processors
InitExecSystem() call to GetNumProcessors() reports: 1 processors
InitExecSystem() will use: 1 processors
starting LabVIEW Execution System 306708506 Thread 0 , capacity: 1 at [3507670087.84041262, (16:48:07.840412710 2015:02:24)]
starting LabVIEW Execution System 306708507 Thread 0 , capacity: 1 at [3507670092.45153570, (16:48:12.451535843 2015:02:24)]
starting LabVIEW Execution System 2 Thread 0 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 1 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 2 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
starting LabVIEW Execution System 2 Thread 3 , capacity: 24 at [3507670103.11840487, (16:48:23.118404925 2015:02:24)]
VI_BROKEN (0): [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NC serial comms protocol.lvlibet Lower Temperature Limit.vi" (0x04667310)]
this->flags=33563136, compilerError=6
VI_BROKEN (0): [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "Heater Control HAL.lvclass:Write Heater Control Active.vi" (0x058c4e98)]
this->flags=50340352, compilerError=6
VI_BROKEN (0): [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
VirtualInstrument:etOrClearBadVILibrary - now VI is bad on [VI "NI_LVConfig.lvlibave Config File.vi" (0x047b7e90)]
this->flags=33563136, compilerError=6
and so on.
This is using a cRIO 9074 running CompactRIO recommended software set 14.0.1 .
These errors happen right at startup. Memory use is steady in interactive mode, about 20 MB contiguous memory is unallocated out of 128 MB. I have taken pains to prevent allocation and follow cRIO besta practices non concatenated strings array building in loops etc). CPU is 50-60% when running interactive mode.
Really at my whit's end here, I have tried the various combination of enabling / disabling debugging in the RTEXE, disconnecting typedefs etc. I have not noticed a pattern.
Regards,
MarkCG

Hello MarkCG,
What minor changes did you make to the serial communication code? Posting the VI or a screenshot of the VI with the modifications which caused the RTEXE to stop functioning could be useful to troubleshoot the issue.
Regards,
J_Bou

Running Forecast in the backgrd chooses Forecast from the INTERACTIVE mode

Folks
When I tried to run forecast through background job, instead of running the forecast based on the Master Profle & Univariate profile I had defined in the Activity, forecast is being run based on the Master Profle & Univariate profiles specified in the Interactive mode?
I had even tried by checking the "Always use job profile' checkbox in the background activity but this didnt work ?
Are there any other extra settings I need to make to overcome this problem ? Any ideas or suggestions ?
TIA
Edited by: Krishna Tummala on Jun 16, 2008 12:36 AM

Hi Srinivas
I do have one question based on your response. This scenario might not arise in the real scenario.
As each selection profile can be assigned with a different forecast profile in the Interactive planning/forecasting mode, what Forecast profile would the system use in mass processing, as the Activity assigned to background job can have only one Master and Forecast profile and the selected ID's in this example has more than one Master and Forecast profile.
Thanks

Solaris 10 U6 jumpstart installation always goes into interactive mode desp

While doing the Solaris 10 U6 jumpstart installation, it is going into interactive mode for netmask.
This is the sysidcfg file configuration being used :
bash-3.00# cat /export/home/iserver/jumpstart/donau1/sysidcfg
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 netmask=255.255.252.0 ip_address=10.50.57.24 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=5YcgZqC0krYjo
bash-3.00#
Here the network interface specified is "ce2" and the netmask is as shown above. Still, we observe the problem all the times.
and I have seen the following messages on the screen
Attempting to configure interface ce3...
Skipped interface ce3
Attempting to configure interface ce2...
Configured interface ce2
ip_arp_done: init failed
ifconfig: setifflags: SIOCSLIFFLAGS: ce2: Cannot assign requested address
Attempting to configure interface ce1...
Skipped interface ce1
Attempting to configure interface ce0...
Skipped interface ce0
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file 10.50.57.214:/export/home/iserver/jumpstart/donau1/sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...
after this it is going into interactive mode and prompting for netmask . After providing the netmask, installation goes through successfully.
so please suggest me some solution to avoid it going into interactive mode.

I have seen this too over the years and it ultimately comes down to something innate:
Here are a few suggestions:
1. Try and use interface ce0.
2. Check default route on both jumpstart server and client.
3. The arp cache may need to be flushed on the Jumpstart server.
4. Use snoop and see what happens during the actual RARPing phase between the server and host.
5. Switch the order in the sysid config file as indicated below:
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 ip_address=10.50.57.24 netmask=255.255.252.0 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=*****************
Please note I blanked your root password. Let me know if this helps.

How to run a test in interactive mode?

If I want to run a test in interactive mode, how do I set it up?
For vcsi, there is a compile time option "-debug" and then in run
time, you could execute "./simv -gui". Do you have such flows available?

Hi
You can define 2 radio button one foreground and otherfor background then
for background use FM BP_JOB_CREATE or BKK_UPT_DISP_JOBS_START or DB2_SCHEDULE_JOB_IMMED
Regards
Shiva

Starting WLST in Interactive mode

I am having a lot of trouble starting WLST in Interactive mode. I am running setWLEnv.sh and then using the command java weblogic.WLST and I get the following error.
root@esrsqa1 bin# ./setWLSEnv.sh
CLASSPATH=/opt/bea/patch_wlw1001/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/patch_wls1001/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/jrockit_150_11/lib/tools.jar:/opt/bea/wlserver_10.0/server/lib/weblogic_sp.jar:/opt/bea/wlserver_10.0/server/lib/weblogic.jar:/opt/bea/modules/features/weblogic.server.modules_10.0.1.0.jar:/opt/bea/modules/features/com.bea.cie.common-plugin.launch_2.1.2.0.jar:/opt/bea/wlserver_10.0/server/lib/webservices.jar:/opt/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/bea/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar:
PATH=/opt/bea/wlserver_10.0/server/bin:/opt/bea/modules/org.apache.ant_1.6.5/bin:/opt/bea/jrockit_150_11/jre/bin:/opt/bea/jrockit_150_11/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/oracle_client/product/11.1.0/client_1/bin:/root/bin
Your environment has been set.
root@esrsqa1 bin#
root@esrsqa1 bin#
root@esrsqa1 bin#
root@esrsqa1 bin# java Weblogic.WLST
Exception in thread "main" java.lang.NoClassDefFoundError: Weblogic.WLST
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Caused by: java.lang.ClassNotFoundException: Weblogic.WLST not found in gnu.gcj.
runtime.SystemClassLoader{urls=[file:./], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
I can use WLST just fine if I pass it a python script but it will not work interactively. I am using WLST in my startup and shutdown scripts and they work flawlessly. Does anybody have any ideas?
Thanks,
Scott
Edited by: carters2 on Apr 2, 2009 6:46 AM
Edited by: carters2 on Apr 2, 2009 6:49 AM

Team,
As per the instructions, I have changed the port from 7001 to 10003
java weblogic.WLST
wls:/offline> connect()
Please enter your username [weblogic] : weblogic
Please enter your password [weblogic] : weblogic
Please enter your server URL [t3://localhost:7001] : t3://localhost:7001
Connecting to t3://localhost:7001 with userid weblogic ...
edit()
startEdit()
cd ('Servers/AdminServer')
cmo.setListenPort(9999)
save()
activate()
When I tried to start the server, I am receiving the following error
May 4, 2010 4:15:41 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun
Microsystems Inc.>
<May 4, 2010 4:15:42 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 380194 Fri Oct 24 13:20:13 IST 2008
WebLogic Server Temporary Patch for 8408837 Fri Apr 03 17:01:18 EDT 2009
WebLogic Server Temporary Patch for CR378781, CR380313 Fri Sep 19 13:34:16 PDT 2008
WebLogic Server Temporary Patch for CR381056 Mon Oct 06 10:48:50 EDT 2008
WebLogic Server Temporary Patch for CR374413, CR378680 Tue Sep 02 09:55:36 PDT 2008
WebLogic Server Temporary Patch for CR378102 Wed Sep 10 23:28:48 PDT 2008
WebLogic Server Temporary Patch for CR378741 Tue Sep 09 13:08:51 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<May 4, 2010 4:15:43 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 4, 2010 4:15:43 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<May 4, 2010 4:15:44 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea\user_projects\domains\osb_domain\servers\AdminServer\l
ogs\AdminServer.log is opened. All server side log events will be written to this file.>
<May 4, 2010 4:15:44 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
java.net.UnknownHostException: aaa.bbb.org:10003
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:849)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1200)
at java.net.InetAddress.getAllByName0(InetAddress.java:1153)
at java.net.InetAddress.getAllByName(InetAddress.java:1083)
at java.net.InetAddress.getAllByName(InetAddress.java:1019)
at java.net.InetAddress.getByName(InetAddress.java:969)
at weblogic.rjvm.JVMID.setLocalID(JVMID.java:201)
at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
How do I start the server now?

Lion's Finder settings for "always view in column/list mode" not working

I set specific folders to "always view in column/list" mode using Command+J setting. After upgrading to Lion, Finder seems to always opens folders in the last view mode of the previous folder I open.

Did you try right clicking in the folder area then select "Show view options" then check always show in List/Icon view? You can do this in individual folders as you please.

Cannot export Financial Report from HTML view to Query Ready Mode

Hi,
I am opening Hyperion Financial Reports in Workspace in HTML mode. On the bottom right of the report, when I click on "Export in Query Ready Mode", the report does not get transported to excel. Rather, a message flashes for a split-second and disappears. The message is "The address is not valid". Can anyone please advise as to what should I do to get the report in excel? I did notice that there is also File->Export->Excel->Fully Formatted Grids & Texts, but we want to get it in Query Ready Mode.
Version is 11.1.1.3. Thanks for any suggestions.
ABG

We have resolved this issue. The problem was that Smart View installation/configuration was not complete on the machine which I used to launch report into Query Ready Mode. Once Smart View was fixed, we were able to convert report from HTML view to Query Ready Mode.
ABG

View CR in Interactive mode

Similar Messages

Maybe you are looking for