View CRM billing document from FB03 - Accounting document

I am working with a client who creates some orders in R3 and now some in CRM.
The orders are billed in their respective system.
The CRM billing is then transfered via BDOC's into R3 which create an accounting document.
However, in the environment tab, there is no original document.
Does anyone know if you can access via some form of document flow or function module call from R3 to go direct to the CRM billing document?

Hi Mark
I noticed that your Forum has now been answered.  Could you please share how you resolved the issue of displaying a CRM billing document from FB03 as an "original document".
Many thanks,
Verity
Edited by: Verity Watts on Aug 3, 2010 9:32 PM

Similar Messages

  • Unable to view the billing document created through vf01 tcode

    Hi,
    i'm unable to view the billing document which was created through vf01. when i want to display the document through vf03 it say document not created. As an abaper i'm not able to find any error..
    Is there any configuration missed by the fn guy.

    Hi,
    While you are saving billing document i think you got Express document (please check in Transaction code SBWP :- Business work place of particular user). As per me the number range has completed for the particular document type(might be excise invoice also, if u have excise invoice auto generation functionality)  that is why system is not able to update the invoice.
    Hope this will be helpful
    Regards
    bvdv

  • How do you view original CRM billing document from R3

    We have sales orders and billing now in CRM.
    We have a requirement to link the accounting document to the billing document in CRM.
    Does anyone know if there is a standard function module to get the document flow or link to the CRM document?

    Thats a cool idea.....but, it seems its not something that can be done, due to browser and word restrictions rather than robohelp else.
    Your browser is going to download the .dotx file, and open that rather than allowing the new-file-based-on-template macro thing to run.
    Only work around I could suggest would be to use the template to create a blank .doc or .docx and link to that rather than the template.
    some info I found...
    http://getsatisfaction.com/pbworks/topics/link_to_word_template
    http://en.allexperts.com/q/Microsoft-Word-1058/2008/7/template-link-webpage.htm
    good luck.

  • Mapping of CRM  Billing Document to GTS within Service Parts Management

    Hello,
    We are currently implementing Service Parts Management with GTS.
    We would like to map certain fields coming from CRM Billing to the GTS Customs Document.
    Does anyone know which BADI/user exit can be used to complete this mapping.
    We have seen that to be able to transfer billing documents to GTS we need to activate Service Parts Management.
    Further, how can we get the values for these fields into the customs documents , once these are mapped.
    Which BADI, structures, tables are used for this?
    Does anyone have a sort of data structuring model for the different fields in the customs document , on header and item level.
    How fields are triggered. This could be very useful to have this kind of documentation for doing enhancements etc...
    Now we are struggling with structures.
    Thanks in advance
    Regrds
    Frank

    Frank,
    The key tables for the customs document are:
    /SAPSLL/CUHD (header)
    /SAPSLL/CUIT (item)
    /SAPSLL/CORPAR (partners)
    You can find additional tables in SE16 by search for table names that start with /SAPSLL/CU* or /SAPSLL/COR*
    Unfortunately, I am not sure about the BAdi for document transfer from CRM but the available BAdi's should be listed in the IMG in CRM similar to ECC.
    Sascha

  • CRM Billing: document flow.

    Hello, everyone!
    Did anyone face the problem like this, when I create a follow-up bill doc. from service confirmation then I get surprisingly situation.
    In doc flow tab of billing document I can see the preceding document Service Confirmation, but in doc flow tab of Service Confirmation I can't see the follow-up document Billing document. (the situation is the same in WebUI and in GUI)
    What's the matter? Is it customizing problem or SAP_Basis problem? 2 days ago it was OK, but today I can't see the billing document in doc. flow.
    Please, advice me where to find the solution?

    Hi Andrey,
    Were you able to resolve this and how?
    Regards,
    Kay

  • HT4098 I was automatically renewed for a subscription, and didn't realize this until I got the notice.  I want the bill reversed from my account.  How do I do that?

    I was automatically renewed for a subscription, and I didn't realize it until I got the renewal message.  How do I get this charge reversed.  It was renewed yesterday!

    All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Profict Center substitution in accounting Document of CRM billing

    Hi Experts,
    Currently we are using ECC6.0 and CRM 2007.
    When CRM billing document is released for accounting,
    We are required to Substitute profit center in accounting document/PCA document.
    Presently we tryed user exit PCACRM01 ,
    function module EXIT_RKECRM_PCA_40_001 using a break point but was not reached at tht point.
    Kindly suggest something on this matter.
    Thanks,
    SA

    Debbugging billing doc:
    1)     Before saving the document enter /h and save.
    2)     Now try to place the break point in the function module /1BEA/CRMB_BD_MWC_O_FLOW(CRM)
    3)     This function module calls the method of the PROCESS_OUTBOUND of class CL_SMW_MFLOW. In the method make the variable  ls_header-dbgmode
    To X.
    4)     By doing this the BDOC stops in the debug stage.
    5)     Now go to SMW01 . Select the BDOC and reprocess it. Before reprocessing it enter /h.
    6)     Place the break point at the function modules BEM_UPLOAD_FI_SRV(CRM).
    7)     Once this function module is executed it calls CRM_UPLOAD_TO_OLTP.
    In this function module make the variable i_nosend to 'S'.This
    Function module also calls the function module CRM_UPLOAD_TRIGGER
    To debug the code in R/3 make the variable lv_synchron to u2018Xu2019 and
    Make sure that RFC user is Dialog user
    8)     Now the control is in R/3. In the flow it call
        BAPI_BILL_DOC_PROXY_CREATE and BAPI_ACC_DOCUMENT_POST.
    Now you canplace the breakpoint in the ur userexit.
    Note: Pls do not try this Production.

  • CRM Billiing document not posted in Accounting

    Hi Experts,
    Issue:
    CRM Billing documents not posting to FI.
    We idenfied while debugging in middleware we identified that, Billing document header data doesn't contain value for  "Component for RW interface"(COMPO_ACC).
    Where we need to maintain/configure value for this field in CRM/ECC, please provide me details.

    Is this a case of data migration to new GL.
    FAGL_SPLINFO is the table which gets updated for the split information at the time of document posting. If its from migration, please check that the referred RV document is an open item and was migrated correctly.
    Thanks and Regards,
    Mamta Sarda

  • External Number Range for Billing documents in CRM

    In CRM, billing document external number range can only be numeric or alpha, but NOT alphanumeric. Is this a bug or is there some legitimate reason to have this limitation.
    This question stems from a data conversion where the legacy system invoice numbers are alphanumeric. So when we try to convert those invoice numbers, CRM cannot handle the external alphanumeric number.

    Check this thread
    [Re: Customize Billing Number Format|Re: Customize Billing Number Format]
    thanks
    G. Lakshmipathi

  • Billing Document in B2B Shop.

    Hi gurus,
    we have the following issue that we try to solve since days without result.
    We have a B2B shop connected to CRM 2007. Orders created from the web shop are transferred to ERP where they are delivered and billed. In our Dev and QA system we can see all the delivery and billing documents in the document flow in CRM and we can access/view the billing document in our B2B shop. However in our Production System we only see LIKP documents in the document flow in CRM, but no vbrk documents (invoicing) neither is there a link in the web shop to display the invoice.
    The web shop settings are in all 3 systems the same.
    Any idea where to look or what can go wrong?
    Thanks a lot in advance,
    Nicole

    Hi all,
    just to let you know the answer. Basically our root cause was that the synchronization of our crm adapter filters with ERP went wrong. Even CRM gave as a feedback everything is fine, the filters were synchronized from CRM Prod to ECC TEST. Therefore in the document flow the billing document was filtered out.
    In the ERP table CRMOBJTAB there  we missed entries for object SALESDOCUMENT. The same for table CRMOBJECT.
    Hope this information help someone.
    Cheers,
    Nicole

  • Posting date from CRM Billing doc cancellation

    hello,
    I have an issue in the CRM billing documents transferred from CRM to ECC. When do a biling doc, the document and posting are taken from the document date in CRM billing document.
    But when I do a cancellation of the billing document, the document date is taken from the document date in CRM, however the posting date is taken from the Value date in CRM. We have made some exits in CRM billing where the value date is determined as document date + 5 days.
    I am not sure why the cancellation takes place on the value date. Can anyone here please explain and also tell how this can be made as billing document.
    thanks in advance,
    jigar

    SB,
    Have a look at user-exit USEREXIT_MOVE_FIELD_TO_VBKD in include MV45AFZZ
    PeteA

  • BADI during billing document save

    Hi There,
    I need to change the order status after CRM billing document has been created. Is there any BADI linke ORDER SAVE in billing?
    Regards,
    Ram.

    Hi,
    Check Badi that is called then document is saved.
    cl_Exithandler
    Denis.

  • Billing Document Change history

    Hi,
    Is there any t code or programme availiable for the view of billing document change history.
    suresh

    Dear Suresh,
    Through VF02 transaction itself you can find the changes involved in the billing document.
    Go to VF02 transaction enter billing document number to which you want to check the changes then go Menu>Environment>Click on changes now system will take you the Display changes screen here you give the options then execute.
    I hope this will help you,
    Regards,
    Murali.

  • VIEWING NEW EMAILS FROM MULTIPLE ACCOUNTS

    In Mozilla I have multiple accounts (Hotmail,gmail etc.) I simply want to view all unread emails from all accounts without having to open each account separately. I thought this would be an obvious feature sorry if it is!

    http://kb.mozillazine.org/Global_Inbox#Unified_Folders

  • Badi for CRM billing information...

    Hi experts...
    Is there  any Badi or Exit in ECC to see the CRM Billing Document informatin before accounting document gets generated.
    Or In CRM any BAdi is there to send some values to ECC when billing document gets release.
    Actually i need contract number is to be captured in assignment field of accounting document. Currently we have a provison in ECC i.e in GL  master data one sort key field is there (108- Service contract). If we select this sort key contract number is coming in assignment field of accounting document for the contracts created in ECC(VA41).
    But for CRM contract numbers its not capturing.
    Thanks in advance
    A

    .

Maybe you are looking for