View Dashboards from NWBC
Hi All,
i have adopted dashbaords and saved them to infoview and no problem while viewing them through infoview. But i'm not able to view the same through NWBC.
An error has occured: An error occured while trying to view the document.
I do not have this problem for viewing crystal reports in NWBC.Pls suggest on this.
Regards,
Raj
solved by myslef.
Have to specify below path
Dashboard :http://<servername>:<port>/OpenDocument/opendoc/ openDocument.jsp?iDocID=<insert Document id>
Similar Messages
-
Dear Freinds,
We are creating a Material from Nwbc, after activation and workflow approval it is visible in ECC mm03, But cannot be viewed in nwbc display material.
There is some configuration mistake or technical issue?
Regards
SukumarDear Sukumar,
MDG Material search is based on Enterprise search. Pls check if the ES at MDG system is configured correctly and is working fine with all connectors in "active" status.
Regards, JVR -
Always prompted with Save As Dialog when viewing dashboard
Post Author: jgagarin
CA Forum: Performance Management and Dashboards
Hi,
We are having problem viewing dashboard which contains Xcelsius document. In our development server we were able to view all dashboards with embedded Xcelsius document but when we move it to our production server it shows different output. Everytime we try to view the dashboard it keeps on prompting a "Save As Dialog" instead of showing the Xcelcius file. I really have no idea on what to do next, please help.
Thanks,
JagPost Author: amr_foci
CA Forum: Performance Management and Dashboards
its an issue of macromedia flash player, if you already installed it on ur machine, remove it and reinstall the last version from the macromedia website thenrestart your mcahine.
good luck -
Can't view dashboard with relative url in BI 4 Launchpad
I created a dashboard using BIWS connections and I am able to preview the dashboard when i have the full path of Web Service URL but when I use the relative url and publish to launchpad I get the "Cannot access external data......, Unable to load URL:/dswsbobje/Services/Session..." error message. Any ideas on how to solve this?
ThanksAre you trying to preview the dashboard from dashboard designer tool ? If yes, then you must have a full web service url, otherwise, it will not be able to resolve the server and port.
But, if you use relative URL and export the same to BO repository, you will be able to view the same by logging into BI Launchpad. There it can resolve the server name and port from existing session. -
Cannot View Dashboards on BO 4.1
Hi Guys,
I have done a full installation of BO 4.1 Server/Client to test dashboards on Iphone and Ipads.
The installation was successful and I created a connection from SAP BI App to view dashboards.
when I log in via Iphone I cannot see any folders or dashboard on Iphone.
Pleas let me know what am I missing here.....
Thanks for your help in advance,
JitanHi Guys,
Thanks for your response! We got the IPad connected to our network and the connections are working.
Here's what I did to view the report on Ipad -
Saved the dashboard on BI Launchpad in Mobile format.
Downloaded the App and set up the connections.
I can view the dashboard but there are components that cannot be seen on Ipad because of the compatibility.
Any suggestions?
Thanks again for your help,
Jitan -
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Cannot open dashboard from connected client to restore a single file
I have a small business network with an existing Server 2008 R2 domain controller. In order to backup all the client machines with an experience something like windows home server I recently purchased a new server with windows server 2012 r2 and
installed the essentials role.
I'm able to connect client machines (running windows 7) to the new server and get them to backup. I assume (but have not yet tested) that I would be able to do a full image restore by creating a client restore bootable usb key and booting a client from
that, but first I'd like to be able to browse the files in a client backup and restore a single file rather than the full image. It seems that the only way to do that is to run the dashboard as a remoteapp from the client, but when I try that I get this
error:
I thought that I might need to add the remote desktop services role. So I tried doing that and publishing the dashboard as a remoteapp, but the error still appears. Even if that fixed the problem, though, I would be concerned that would mean we
needed RDS CALs for each client which seems like overkill just for the ability to restore a single file from a backup.
So, is there any other way to get to the dashboard or otherwise restore files onto a client?
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights.Um, well looky here :)
https://social.technet.microsoft.com/Forums/windowsserver/en-US/cf6abdeb-a517-424c-bbef-050bee22a658/remoteapp-error-when-launching-dashboard-from-client-pc?forum=winserveressentials
Grey
PS: Has nothing to do with the price of eggs, but interesting ?
http://www.windowsnetworking.com/articles-tutorials/netgeneral/host-remoteapps-windows-pcs-part1.html -
Not able to print the ALV Report from NWBC
Hi,
I have created one report in ECC and that is attached to NWBC portal via. Tcode.
When I am taking printout of report using SAP GUI then its printing but while printing it from NWBC its giving Error.
Please find the attached screen shot.
Please suggest.
Thanks in Advance.Hi,
Check out the following code
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IT_FIELDCAT = v_fdcat "v_fdcat type SLIS_T_FIELDCAT_ALV,
TABLES
T_OUTTAB = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
You have to pass the it_fieldcat and the output is obtained as a table.
Hope this helps.
Regards,
Deepthi.
Edited by: Deepthi S on Jan 28, 2009 2:02 PM -
My iMac is authorised to play iTunes content, but my Apple TV keeps asking for me to authorise and I am unable to view content from my iTunes Library. How can I convince my Apple TV that I am authorised?
I am not exactly sure what you mean by "authorised", but I am experiencing a similar problem...or the same, in that Apple TV keeps telling me to enable home sharing in my MacBook Pro. It does not seem to recognize that home sharing is already enabled on my Laptop.
Is home sharing and "authorised" one in the same? It used to work just fine before these recent Apple TV updates.
Apple TV, Mac OS X (10.7.2) -
How to create an incremental key in a Matrialized View created from Union?
I am trying to create some sort of incremental key in a materialized view that is formed from several Select and Union statements.
Why? My materialized view has a composite inteligent key of 5 columns. So, when I want to find a particular records, I don't want to have to do a select statement with some many WHERE and AND clauses.
The ROWNUM I tried didn't work (as I thought) because my Materialized view is made out of several union and each select statement of the UNION generates a new set of incremental numbers.
I also tried creating a SEQUENCE (I understand the sequence number will keep growing each time I do a refresh ) but it doesn't look like I can create a SEQUENCE on Matrialized View.
Anyone has any suggestion as how do I create some kind of incremental number in a materilized view created from an Union.
Thank you.
HI'm assuming that this is a continusation of your earlier message
Re: Can I create Sequence on Materialized Views?
It doesn't seem to make sense, as others mentioned in that thread, to try to add this sort of key to a materialized view. Since the key would change every time you refreshed the materialized view, I'm having difficulty understanding how this will simplify your life. Your code would still have to refer to all 5 columns of the composite key since that would be the only constant.
Justin -
Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep? Regardless of whether I am using iMessage from my iPhone or iPad, when I open my MBP, I get attacked by Messages notifications for iMessages I've obviously already seen or responded to. Is there a way to change this? Are others having this issue?
Additionally, previous iMessages sent or received from those devices sometimes don't populate into the Messages window on the MBP. I haven't been able to identify when or what causes this; sometimes it just doesn't seem to work (and I verified that the messages sent/received were, in fact, iMessages and not SMS).
Thanks - any help or insight would be appreciated!First you need to determine what laptop model you have; then we can help you. A Mac Book Pro cannot run OS 9.1.
With your Mac booted up, click on the at the far left of the menu. Then click on About This Mac. It will show what version of OS you are running. What is the version?
A MBP will be running something like version 10.x.
If you are running version OS 9.x, you don't have a Mac Book Pro.
Cheers, Tom -
Calling a method in the view controller from the component controller
Hi
Is there anyway to call a method in the view implementation from the component controller??
Thanks
jackThanks for all your replies. I want this kind of a functionality because Im trying to invove a DC (Child DC) from a Parent DC such that the Child DC's view is displayed onto the view container of the Parent DC. I have embedded using 'interface view of a component instance' in the Parent Window and am able to create the component and set usage though the onPlugDefault of the Child View.
But I observe that when i make a call from the parent, the flow is like this:
1. The wdDoInit of the Child Component Controller gets triggered first.
2. Then the wdDoInit of the Child's <b>VIEW</b> gets triggered
3. and <b>THEN</b> the onPlugDefault of the Child Component Interface View
What I had actually wanted was to Fire onPlugDefault where Im calling a method LoadData(), after which the Child DC's view must be triggered so it can display the fetched data.
What is actually happening is the view gets displayed, but no data is displayed in the view.
Right now I have just given a work around where Im triggering <b>LoadData()</b> of the <b>COmponent COntroller</b> from the <b>wdDoInit</b> of the <b>VIEW</b>.
Is there a better way to do this? I find it strange that I have to load the Data from the view.
Thanks
Jack -
Error while trying to access dashboards from EPM
Hi
We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration."
Please , help us in solving the above issue.
Thanks.Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI -
ADF - Accessing view object from a button in a window
Hi
I am using Jdeveloper 10.1.3.2.0 to build a Swing/ADF application.
I added a method to a view class to call a database procedure.
I use that view as a base of a jTable to display data in a window.
Now I need to call the method that I created in the view class from a button on the same window where I display the data, ideally using the same db connection.
I am quite new to ADF and I have no idea how to get a reference to the view instance in the button method to call my new method. How can I do that? Is there another way to achieve this?
Thanks!
LuisYou usually do this by creating the method at the application module level and then exposing it as a client method. You can then drag and drop it onto your form as a button.
See details in the ADF Developer Guide chapters 8.3-8.5:
http://download.oracle.com/docs/html/B25947_01/bcservices003.htm#sm0206 -
How to view images from application's path?
Hello,
I am using the codes below to view images from an ACCESS database listed as ".\image.png", the images are included in the application's path. I'm able to view the images while running crystal reports alone; However when I include the same report and databse in my VB.NET application, the images don't show. I was told that the report looks for the images in a temp folder, an alternative solution would be to copy the image files to a temp folder before attempting to run the report, but so many things can go wrong with such approach. Do you have a better solution to this problem?
Thanks in advance.
Victor
Code:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim myaop6viewer As New aop6viewer
Dim myaop6report As New AOP6V2
Dim crConnectionInfo As ConnectionInfo = New ConnectionInfo
crConnectionInfo.ServerName = (Application.StartupPath & "\AOP6V2.mdb")
crConnectionInfo.Password = "testaop"
setDBLogonForReport(crConnectionInfo, myaop6report)
myaop6report.RecordSelectionFormula = "isnull({image.country}) = false"
With myaop6viewer
.CrystalViewer22.ReportSource = myaop6report
.Show()
End With
myaop6report = Nothing
End Sub
Private Sub setDBLogonForReport(ByVal connection As ConnectionInfo, ByVal report As ReportDocument)
Dim mytables As Tables = report.Database.Tables
Dim mytable As CrystalDecisions.CrystalReports.Engine.Table
For Each mytable In mytables
Dim mytablelogoninfo As TableLogOnInfo = mytable.LogOnInfo
mytablelogoninfo.ConnectionInfo = connection
mytable.ApplyLogOnInfo(mytablelogoninfo)
Next
End SubI tried following your suggestions, but I'm unable to link to the image file from the application, can you please help me link to the image from the application.
1. Created a formula name test with the folowing data:
".\test.png"
2. In the Gphics Location, entered:
{@test}
3. Below is the code in my application
Imports System.Data.OleDb
Imports Microsoft.VisualBasic.ControlChars
Imports CrystalDecisions.Shared
Imports CrystalDecisions.CrystalReports.Engine
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim myaop6viewer As New aop6viewer
Dim myaop6report As New AOP6V2
Dim crConnectionInfo As ConnectionInfo = New ConnectionInfo
crConnectionInfo.ServerName = (Application.StartupPath & "\AOP6V2.mdb")
crConnectionInfo.Password = "testaop"
setDBLogonForReport(crConnectionInfo, myaop6report)
myaop6report.DataDefinition.FormulaFields.Item("@test").Text = "path + picture name" '???????
myaop6report.RecordSelectionFormula = "isnull({image.country}) = false"
With myaop6viewer
.CrystalViewer22.ReportSource = myaop6report
.Show()
End With
myaop6report = Nothing
End Sub
Private Sub setDBLogonForReport(ByVal connection As ConnectionInfo, ByVal report As ReportDocument)
Dim mytables As Tables = report.Database.Tables
Dim mytable As CrystalDecisions.CrystalReports.Engine.Table
For Each mytable In mytables
Dim mytablelogoninfo As TableLogOnInfo = mytable.LogOnInfo
mytablelogoninfo.ConnectionInfo = connection
mytable.ApplyLogOnInfo(mytablelogoninfo)
Next
End Sub
Thanks,
Victor
Maybe you are looking for
-
Hi, Joann JustAnswer has asked me to answer your question -- "I have iPad 2 and I don't see the little box at top in safari with the number on it that I can tap to get to my open pages On iPad 1 it was next to the little open book
-
Hi guys so I have an iPod touch 5 16 gb and I'm very confused? I have heard ipod 5 has airplay but on my iPod touch i don't see like an airplay icon! Please help me because I'm very confused! I know my name is IPOD_GENIUS but I'm not a genius on this
-
How to create storage locations in a standalone scenario??
Hello everybody, I need some help. I'm working with SRM 5.0. I'm making a standalone scenario. When I created the organizational plan, in the check tab, a error appears. The message is: "Define the attribute LAG". The attribute LAG is the storage
-
HP Pavilion x360 Toucpad is erratic
This is a new system purchased J it an 15. I have not used much as I am converting my data from Mac to PC. I have from the beginning been having serious issues with the touchpad cursor or any controls being all over the place and just doing what
-
Unable to perform for-each on quer-database() result
Hi I am using the quer-database function in my XSLT which is returning more than 1 value. when i try assigning these values I am only able to assign the first row of elements. When I try dragging the for-each activity and try using it with the qurey-