VIEW DATA IN PSA

Hi,
I successfully loaded data in the PSA. I right clicked on the datasource and then Manage---- I still dont see the data in PSA.
Could some one tell me how to view the actual data in the PSA?
Thanks

Hi Daniel,
Please check the below path once again.
Go to the particular Data Source,,and right click to go to the manage screen,,and u will find ur requests for the corresponding PSA ...
and below it u will the PSA symbol and clicking on it u will find the number of records,,along with the selection parameters for the number of records and Status of the records...
and if u dont find the request in PSA maintenance screen,,,this means the data has not been moved to PSA.
If u have loaded already and still not finding them in ur manage screen,,,once log off,,,and login again...
Although it sounds crazy...sometimes i encountered the same problem,,
Hope this helps u..
Assign points if needful...
Best Regards,
VVenkat.

Similar Messages

Not able to view data from more than one data package in PSA

Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AM

Hi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe

Can not view data in a request from psa

Dear experts,
I have a problem with data in psa. If a select a mange of PSA, I see some request. I select one of them to see data. But there is no data. How is it possible?
If you delete a reques from psa, that request desappears from the psa, doesn't it?
Thanks in advance,
yeberri

it dosn't work. The problem is that you can see different green requests in manage from psa, but it is not possible to see internal data.
If I try to see data with se16 and the psa table, there are data for one request, but not for request that i need.
any idea? is very important to rescue this request.
thanks for your help.

BI 7.0 data load issue: InfoPackage can only load data to PSA?

BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!

You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

Unable to view data in the InfoCube as well as in the query

Hi all,
I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
It looks to be a strange sitaution.
Please help me out
Regards
YJ

Hi,
I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
Refer the note: 353042
And also refer the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
And also search this forum with "PROCESSKEY"
With rgds,
Anil Kumar Sharma .P

Data Federator - View Data in DF

Hi,
Can we view data in Data Federator if data source is SAP BW

>
> Although you may have tested the connection, check your "leselect" log file
>
Checked in leSelect.log
Could not start server: Connect to SAP gateway failed
>
> Is it a case of resolving the DNS name? check in BW via RZ11 that the name is fully qualified as that is what DF is expecting.
>
Tried. However what parameter supposed to be entered. should it be I_RFC_DEXTINATION ?

View data in client B from client A in the same SID without a valid logon?

Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.

Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan

View data in 10.1.3.4.1 is not working

Hi
I imported SH Schema from the oracle database to the repository.But i can not view the data in admintool in 10.1.3.4.1
the steps are the following
1.import sh schema from the database to the admin tool
2.click on any table in physical layer and click view data
i got a error"table or view does not exist ORA-00948 Issue"
but table and views are exist in the database.pls help

user13351713 wrote:
tnsnames.ora file entries are correct, i can connect to database with sql*plus
is any attribute in NQSCONFIG.ini may prevent view datanot that i'm aware of.
regards
John
http://www.obiee101.blogspot.com/

Can we view data in Multiprovider

Hello All
In one of my interview he asked me can v view data in multiprovider.(Not in reporting level).
I said no,he said yes?
If anyone knows abt this pl let me know.
Regards
balaji

Hi Balaji,
Yes. Your are right that teh multi-provider does not store any data. It is like a view that displays the data from various data targets using union. LISTCUBE displays the data using those unions and displays the data. It is not fetching data from any underlying table of the Multi-provider. Probably if you debug then you would find the various SQL statements fetching data from the other data targets using the join conditions.
LISTCUBE is just meant for displaying the data from an Info-provider in the backend.
If you are familiar with R/3 then you would have noticed that you can see the data in table or view in SE11/SE16 even though a table has data where as a View does not. It is something similar to that.
Hope this helps.
Bye
Dinesh

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Can't view data from BI Anaytics

Hi,
I am new to BI suite. currently our repository has two different connection pool associated with two different schema. Since my ex-coworker built the first one and left. I don't want to mess up with his work. I built another connection pool with different schema. There is no problem with deployment and i am able to view data in physical layer. But when i login to BI analytics and i found i am not able to view data. The error is:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 1031, message: ORA-01031: insufficient privileges at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT 0 s_0, "Sample Sales"."Products"."Brand" s_1 FROM "Sample Sales" FETCH FIRST 65001 ROWS ONLY
My DBA told me it might be ODBC driver problem since he told me he didn't even see the query from database monitor. When i check ODBC setup in BI server and found there is default odbc setup under System DSN.
does anybody know what this problem is?
Thanks

Good day !
I will to public my results with simple solving my problem,
because it may be useful to somebody else.
---------------- Create materialized view ---------
create materialized view easydw.CUSTOMER_PURCHASES_MV
TABLESPACE "EASYDW_DEFAULT"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON COMMIT
AS
select "CUSTOMER"."OCCUPATION" as "OCCUPATION",
"PURCHASES"."CUSTOMER_ID" as "CUSTOMER_ID"
from "PURCHASES" "PURCHASES", "CUSTOMER" "CUSTOMER"
where "CUSTOMER"."CUSTOMER_ID"="PURCHASES"."CUSTOMER_ID";
Now if one of tables updated, you must execute SQL-command
"COMMIT". Before this you must deselect "AutoCommit" at
SQL-window, if you use Application Express.
Winni.

Unable to view Data Analysis in Project Server 2007

Hi,
I am currently using Project server 2007. One of our PM is not able to view Data Analysis information which are available to other PM.
It says 'The query cannot be processed. Either the user doesn't have access to Analysis service Database or the database doesn't exist"
We checked the following.
Tools >
Internet options > Security tab > Click Trusted Sites >
Custom Level > Search for Access data source across domains and its enabled.
Kindly advice. Thanks in advance!

Hi Nathik,
You should also check that the PM in question has not been granted specific permission. If he doesn't have the "View OLAP Data" and "View Data Analysis" permissions, he will not be able to use the data analysis. Also check
that the PWA URL is in the trusted site of IE. Finally press CTRL F5 to clean IE cache. Check also that the OLAP cubes were successfully built.
A good way for you to debug is to use your admin account on his machine to see if it is a permission issue or a IE setting issue.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to view data in SNC after getting transferred from ERP

Hi all
I have transferred material ,vendor, customer ,scheduling agreement ,demand from ERP to SNC system.
Now I want to view this demand in SNC. What I have done is in SNC is I opened supplier view.
In supplier view, I opened SMI monitor. Now when I click on F4 help of product I am not able to view the material
which I had transferred. Same is the case with location.
I know that in SNC, in order to view data following assignment is required.
Material  Location  Business Partner ( Org ) --- > BP ( Person )  User.
Now I have assigned Material to location .
Location to BP ( Org ).
BP ( org ) to BP ( Person ).
BP ( Person ) to user.
But still I am not able to view the data in F4 help ( For SMI overview screen ).
Next I learnt about Selection modes in SNC.I think I need to assign selection mode u201CPDNF_NEWu201D
To application ID of SMI overview screen in order to view Product and location in F4 help.
If I am correct than please let me know how should I proceed. Else please let me know
What all configuration is required to view product and material data in F4 help and eventually the demand which I
Had transferred from ERP.
Best Regards
Rahul

Hi Vasu/ hi Nikhil,
I have done what you mentioned but still could not see the data in SNC Web UI.
Let me explain once again.
Consider a case when Panasonic ( Supplier ) is managing inventory for Walmart ( Customer ).[ VMI scenario ]
Now
Step 1 : Walmart will create Material,Location,SA ,demand in his ERP.
Step2 : Master data with demand will get transferred to from customers ERP system to SNC system.
I can see Product and location by SNC -- > Master data -- > Product/Location.
Till this point everything is fine.
Next I have done following.
Assign my user to Business Partner of type org ( Customer ).
Location is assigned to Business partner.( Customer ) as material will be shiped to customer location.
Location is assigned to model 000
Material is assigned to Location and Planning version 000.
Now logically assignement is as follows.
User -- > BP --> Location --> Material.
Now when I go to customer view ,in product and location,I should be able to see my product and Location.
But I am not able to see.
Could you help where I am going wrong.
Regards
Rahul

Unable to view data in some HR tables

Since I upgraded to SQL Developer 2.1.1.64 I have not been able to view data in the data tab for the following tables that I have run accross: per_all_people_f, per_all_assignments_f or per_all_positions_f.
Other tables that I have been using seem to be working fine, but these I need to use all the time. I get the column numbers returned, but no data or column headings.
Another co-worker that has upgraded is experiencing the same problem.

I could not get the ddl to show up on the sql tab in version 2.1.1.64, but I did run it in version 1.5.4 and this is what was returned.
-- Unable to Render DDL with DBMS_METADATA using internal generator.
CREATE TABLE HR.PER_ALL_PEOPLE_F
PERSON_ID NUMBER(10, 0) NOT NULL,
EFFECTIVE_START_DATE DATE NOT NULL,
EFFECTIVE_END_DATE DATE NOT NULL,
BUSINESS_GROUP_ID NUMBER(15, 0) NOT NULL,
PERSON_TYPE_ID NUMBER(15, 0) NOT NULL,
LAST_NAME VARCHAR2(150 BYTE) NOT NULL,
START_DATE DATE NOT NULL,
APPLICANT_NUMBER VARCHAR2(30 BYTE),
BACKGROUND_CHECK_STATUS VARCHAR2(30 BYTE),
BACKGROUND_DATE_CHECK DATE,
BLOOD_TYPE VARCHAR2(30 BYTE),
COMMENT_ID NUMBER(15, 0),
CORRESPONDENCE_LANGUAGE VARCHAR2(30 BYTE),
CURRENT_APPLICANT_FLAG VARCHAR2(30 BYTE),
CURRENT_EMP_OR_APL_FLAG VARCHAR2(30 BYTE),
CURRENT_EMPLOYEE_FLAG VARCHAR2(30 BYTE),
DATE_EMPLOYEE_DATA_VERIFIED DATE,
DATE_OF_BIRTH DATE,
EMAIL_ADDRESS VARCHAR2(240 BYTE),
EMPLOYEE_NUMBER VARCHAR2(30 BYTE),
EXPENSE_CHECK_SEND_TO_ADDRESS VARCHAR2(30 BYTE),
FAST_PATH_EMPLOYEE VARCHAR2(30 BYTE),
FIRST_NAME VARCHAR2(150 BYTE),
FTE_CAPACITY NUMBER(5, 2),
FULL_NAME VARCHAR2(240 BYTE),
HOLD_APPLICANT_DATE_UNTIL DATE,
HONORS VARCHAR2(45 BYTE),
INTERNAL_LOCATION VARCHAR2(45 BYTE),
KNOWN_AS VARCHAR2(80 BYTE),
LAST_MEDICAL_TEST_BY VARCHAR2(60 BYTE),
LAST_MEDICAL_TEST_DATE DATE,
MAILSTOP VARCHAR2(45 BYTE),
MARITAL_STATUS VARCHAR2(30 BYTE),
MIDDLE_NAMES VARCHAR2(60 BYTE),
NATIONALITY VARCHAR2(30 BYTE),
NATIONAL_IDENTIFIER VARCHAR2(30 BYTE),
OFFICE_NUMBER VARCHAR2(45 BYTE),
ON_MILITARY_SERVICE VARCHAR2(30 BYTE),
ORDER_NAME VARCHAR2(240 BYTE),
PRE_NAME_ADJUNCT VARCHAR2(30 BYTE),
PREVIOUS_LAST_NAME VARCHAR2(150 BYTE),
PROJECTED_START_DATE DATE,
REHIRE_AUTHORIZOR VARCHAR2(30 BYTE),
REHIRE_REASON VARCHAR2(60 BYTE),
REHIRE_RECOMMENDATION VARCHAR2(30 BYTE),
RESUME_EXISTS VARCHAR2(30 BYTE),
RESUME_LAST_UPDATED DATE,
REGISTERED_DISABLED_FLAG VARCHAR2(30 BYTE),
SECOND_PASSPORT_EXISTS VARCHAR2(30 BYTE),
SEX VARCHAR2(30 BYTE),
STUDENT_STATUS VARCHAR2(30 BYTE),
SUFFIX VARCHAR2(30 BYTE),
TITLE VARCHAR2(30 BYTE),
VENDOR_ID NUMBER(15, 0),
WORK_SCHEDULE VARCHAR2(30 BYTE),
WORK_TELEPHONE VARCHAR2(60 BYTE),
COORD_BEN_MED_PLN_NO VARCHAR2(30 BYTE),
COORD_BEN_NO_CVG_FLAG VARCHAR2(30 BYTE),
DPDNT_ADOPTION_DATE DATE,
DPDNT_VLNTRY_SVCE_FLAG VARCHAR2(30 BYTE),
RECEIPT_OF_DEATH_CERT_DATE DATE,
USES_TOBACCO_FLAG VARCHAR2(30 BYTE),
BENEFIT_GROUP_ID NUMBER(15, 0),
REQUEST_ID NUMBER(15, 0),
PROGRAM_APPLICATION_ID NUMBER(15, 0),
PROGRAM_ID NUMBER(15, 0),
PROGRAM_UPDATE_DATE DATE,
ATTRIBUTE_CATEGORY VARCHAR2(30 BYTE),
ATTRIBUTE1 VARCHAR2(150 BYTE),
ATTRIBUTE2 VARCHAR2(150 BYTE),
ATTRIBUTE3 VARCHAR2(150 BYTE),
ATTRIBUTE4 VARCHAR2(150 BYTE),
ATTRIBUTE5 VARCHAR2(150 BYTE),
ATTRIBUTE6 VARCHAR2(150 BYTE),
ATTRIBUTE7 VARCHAR2(150 BYTE),
ATTRIBUTE8 VARCHAR2(150 BYTE),
ATTRIBUTE9 VARCHAR2(150 BYTE),
ATTRIBUTE10 VARCHAR2(150 BYTE),
ATTRIBUTE11 VARCHAR2(150 BYTE),
ATTRIBUTE12 VARCHAR2(150 BYTE),
ATTRIBUTE13 VARCHAR2(150 BYTE),
ATTRIBUTE14 VARCHAR2(150 BYTE),
ATTRIBUTE15 VARCHAR2(150 BYTE),
ATTRIBUTE16 VARCHAR2(150 BYTE),
ATTRIBUTE17 VARCHAR2(150 BYTE),
ATTRIBUTE18 VARCHAR2(150 BYTE),
ATTRIBUTE19 VARCHAR2(150 BYTE),
ATTRIBUTE20 VARCHAR2(150 BYTE),
ATTRIBUTE21 VARCHAR2(150 BYTE),
ATTRIBUTE22 VARCHAR2(150 BYTE),
ATTRIBUTE23 VARCHAR2(150 BYTE),
ATTRIBUTE24 VARCHAR2(150 BYTE),
ATTRIBUTE25 VARCHAR2(150 BYTE),
ATTRIBUTE26 VARCHAR2(150 BYTE),
ATTRIBUTE27 VARCHAR2(150 BYTE),
ATTRIBUTE28 VARCHAR2(150 BYTE),
ATTRIBUTE29 VARCHAR2(150 BYTE),
ATTRIBUTE30 VARCHAR2(150 BYTE),
LAST_UPDATE_DATE DATE,
LAST_UPDATED_BY NUMBER(15, 0),
LAST_UPDATE_LOGIN NUMBER(15, 0),
CREATED_BY NUMBER(15, 0),
CREATION_DATE DATE,
PER_INFORMATION_CATEGORY VARCHAR2(30 BYTE),
PER_INFORMATION1 VARCHAR2(150 BYTE),
PER_INFORMATION2 VARCHAR2(150 BYTE),
PER_INFORMATION3 VARCHAR2(150 BYTE),
PER_INFORMATION4 VARCHAR2(150 BYTE),
PER_INFORMATION5 VARCHAR2(150 BYTE),
PER_INFORMATION6 VARCHAR2(150 BYTE),
PER_INFORMATION7 VARCHAR2(150 BYTE),
PER_INFORMATION8 VARCHAR2(150 BYTE),
PER_INFORMATION9 VARCHAR2(150 BYTE),
PER_INFORMATION10 VARCHAR2(150 BYTE),
PER_INFORMATION11 VARCHAR2(150 BYTE),
PER_INFORMATION12 VARCHAR2(150 BYTE),
PER_INFORMATION13 VARCHAR2(150 BYTE),
PER_INFORMATION14 VARCHAR2(150 BYTE),
PER_INFORMATION15 VARCHAR2(150 BYTE),
PER_INFORMATION16 VARCHAR2(150 BYTE),
PER_INFORMATION17 VARCHAR2(150 BYTE),
PER_INFORMATION18 VARCHAR2(150 BYTE),
PER_INFORMATION19 VARCHAR2(150 BYTE),
PER_INFORMATION20 VARCHAR2(150 BYTE),
PER_INFORMATION21 VARCHAR2(150 BYTE),
PER_INFORMATION22 VARCHAR2(150 BYTE),
PER_INFORMATION23 VARCHAR2(150 BYTE),
PER_INFORMATION24 VARCHAR2(150 BYTE),
PER_INFORMATION25 VARCHAR2(150 BYTE),
PER_INFORMATION26 VARCHAR2(150 BYTE),
PER_INFORMATION27 VARCHAR2(150 BYTE),
PER_INFORMATION28 VARCHAR2(150 BYTE),
PER_INFORMATION29 VARCHAR2(150 BYTE),
PER_INFORMATION30 VARCHAR2(150 BYTE),
OBJECT_VERSION_NUMBER NUMBER(9, 0),
DATE_OF_DEATH DATE,
ORIGINAL_DATE_OF_HIRE DATE,
TOWN_OF_BIRTH VARCHAR2(90 BYTE),
REGION_OF_BIRTH VARCHAR2(90 BYTE),
COUNTRY_OF_BIRTH VARCHAR2(90 BYTE),
GLOBAL_PERSON_ID VARCHAR2(30 BYTE),
COORD_BEN_MED_PL_NAME VARCHAR2(80 BYTE),
COORD_BEN_MED_INSR_CRR_NAME VARCHAR2(80 BYTE),
COORD_BEN_MED_INSR_CRR_IDENT VARCHAR2(80 BYTE),
COORD_BEN_MED_EXT_ER VARCHAR2(80 BYTE),
COORD_BEN_MED_CVG_STRT_DT DATE,
COORD_BEN_MED_CVG_END_DT DATE,
PARTY_ID NUMBER(15, 0),
NPW_NUMBER VARCHAR2(30 BYTE),
CURRENT_NPW_FLAG VARCHAR2(30 BYTE),
GLOBAL_NAME VARCHAR2(240 BYTE),
LOCAL_NAME VARCHAR2(240 BYTE)
, CONSTRAINT PER_PEOPLE_F_PK PRIMARY KEY
PERSON_ID,
EFFECTIVE_START_DATE,
EFFECTIVE_END_DATE
ENABLE
TABLESPACE "HR_DATA_SPACE_01"
LOGGING
PCTFREE 10
PCTUSED 40
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 48K
NEXT 8000K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PEOPLE_F_FK1 FOREIGN KEY
BUSINESS_GROUP_ID
REFERENCES HR.HR_ALL_ORGANIZATION_UNITS
ORGANIZATION_ID
) ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PEOPLE_F_FK2 FOREIGN KEY
PERSON_TYPE_ID
REFERENCES HR.PER_PERSON_TYPES
PERSON_TYPE_ID
) ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT HR_PER_DATE_OF_DEATH CHECK
(DATE_OF_DEATH >= DATE_OF_BIRTH)
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_ON_MILITARY_SRV_CHK CHECK
(ON_MILITARY_SERVICE IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_DPDNT_VLNTRY_SVCE_FLAG_CHK CHECK
(DPDNT_VLNTRY_SVCE_FLAG in ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_SECOND_PASSPORT_CHK CHECK
(SECOND_PASSPORT_EXISTS IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_FAST_PATH_EMPLOYEE_CHK CHECK
(FAST_PATH_EMPLOYEE IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_COORD_BEN_NO_CVG_FLAG CHECK
(COORD_BEN_NO_CVG_FLAG in ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_RESUME_EXISTS_CHK CHECK
(RESUME_EXISTS IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_SEX_CHK CHECK
(SEX IN ('M', 'F'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_EXPENSE_CHECK_SEND_CHK CHECK
(EXPENSE_CHECK_SEND_TO_ADDRESS IN ('H', 'O', 'P'))
ENABLE
CREATE INDEX HR.CSUH_PPF_ATTR12_IDX ON HR.PER_ALL_PEOPLE_F (ATTRIBUTE12 ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE
INITIAL 1M
NEXT 104K
MINEXTENTS 1
MAXEXTENTS 8192
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.CSUH_PPF_ATTR1_IDX ON HR.PER_ALL_PEOPLE_F (ATTRIBUTE1 ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 560K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 8192
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N1 ON HR.PER_ALL_PEOPLE_F (UPPER(FULL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N2 ON HR.PER_ALL_PEOPLE_F (UPPER(LAST_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N50 ON HR.PER_ALL_PEOPLE_F (LAST_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 496K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N51 ON HR.PER_ALL_PEOPLE_F (EMPLOYEE_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 328K
NEXT 80K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N52 ON HR.PER_ALL_PEOPLE_F (APPLICANT_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 8K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N53 ON HR.PER_ALL_PEOPLE_F (NATIONAL_IDENTIFIER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 496K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N54 ON HR.PER_ALL_PEOPLE_F (FULL_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 760K
NEXT 240K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N55 ON HR.PER_ALL_PEOPLE_F (PARTY_ID ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N56 ON HR.PER_ALL_PEOPLE_F (NPW_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N57 ON HR.PER_ALL_PEOPLE_F (UPPER(GLOBAL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N58 ON HR.PER_ALL_PEOPLE_F (UPPER(LOCAL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N59 ON HR.PER_ALL_PEOPLE_F (EMAIL_ADDRESS ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N60 ON HR.PER_ALL_PEOPLE_F (GLOBAL_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
;

Unable to load the data from PSA to INFOCUBE

Hi BI Experts, good afternoon.
    I am loading 3 years data( Full load ) from R/3 to Infocube.
   So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
       SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
   Please give me the solution how to solve this problem.
Thanks & Regards
     Anjali

Hi Teja,
   Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
          Anjali

VIEW DATA IN PSA

Similar Messages

Maybe you are looking for