View, dm_os_volume_stats, missing after Service Pack 2 install

I installed Service Pack 2 for SQL Server 2008 R2 Standard Edition.  No errors were encountered.  However I expected to find a new view called, dm_os_volume_stats.  I do not see this view.  I have patched 4 instances and none of those
instances have this view.  Please advise.

Have you verified the @@VERSION on all these servers? Do you have VIEW SERVER STATE permission?
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Similar Messages

  • Intel-based PC constantly rebooting after Service Pack 3 install

    I know many of people were having this problem, but since my PC doesn't have an AMD processor, I'm not sure what to do.
    My PC is an HP Pavilion with an Intel Pentium 4 3.0 GHz. I don't exactly know the model number and since I'm away from home I can't look at it right now.
    I installed Service Pack 3 the other day and I'm getting the common error where the computer is constantly rebooting. I'm hesitant to do what the following link suggests since it seems to be only applicable to AMD computers:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01457284
    I can't boot in Safe Mode nor the last known working configuration. I don't have the recovery disks and I don't have a copy of XP for reformatting either. I figure my answer is in the Recovery Console?
    Since I can't post from home this'll be a slow process. What should I do? Thank for reading!

    Try altering the Windows registry key as follows. Once it is completed then once again begin installation of SP3:
    1. Click Start - Run - Type “regedit” and press enter.
    2. Navigate to
    HKEYLOCALMACHINE
    \Software
    \Microsoft
    \Windows
    \CurrentVersion
    \Setup
    3. In the right pane, Right-click and select New - String value
    4. Name it as “BootDir” and set its value to “C:\”
    This should help. Try installing SP3 and should work fine.
    Axel F.

  • Vista Service Pack 2 install error message and Realtek incompatibility

    Just want to inform that service pack 2 install gave me an error message when I installed it on a clean rebuild of my Toshiba laptop. Something about an incompatible driver. As I had already installed the latest drivers from Toshiba pages, I choose the 'ignore and continue' action at install, and the update successfully completed.
    I then ran the Windows Upgrade advisor utility (just search a Microsoft website to find it) which checks for hardware/driver compliance with Vista.
    Their report says that the Realtek RTL8187B wireless adapter driver has an issue with Vista, and recommends that the latest driver be installed. Since I do have the latest Toshiba driver installed, what is the procedure to follow?
    The wifi connection with this laptop functions well, with the only 'problem' being a 45 second delay when waking up from sleep mode to being able to open a new web page. This is the time it takes to establish a connection to my router/modem.

    > Their report says that the Realtek RTL8187B wireless adapter driver has an issue with Vista, and recommends that the latest driver be installed. Since I do have the latest Toshiba driver installed, what is the procedure to follow?
    You could try the Realtek WLan driver from the Realtek driver page.
    There you can find the latest Realtek drivers for different Realtek chips.
    But to be honest I would not be worried about this massage.
    Something like that can happens always after any installations of the Microsoft service packs.
    I remember that many drivers were not supported by SP1 but they ran properly
    So take it easy ;)

  • How to tell what Service Pack is installed?

    Hello, can anyone tell me how to determine what service pack is installed on my computer?  I am running Crystal Reports XI Release 2 .NET 2005 Server.
    Thanks in advance!
    Tim

    Hello Kultar, this did not work for me but something that I did find to work was a registry setting.  The setting is:
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Viewer
    The subkey is PrintControlVersion which should have a value of "11,5,10,1263"
    Best regards,
    Tim

  • How can I get what the service pack is installed on my machine from java co

    Hi..
    Advanced Thanks to everyone, who visit this thread..
    In one of my program, I need to find, my Operating System details from java code.. ofcourse I can get OS type and version by System.getProperties().., But especially I need to get what the service pack is installed.. SP1 or SP2.. Can anyone tell me how can I get that info..

    Prasad.Kollipara wrote:
    Hi boss..
    Not to hack the system or not check whether it is hackable or not..
    I am developing a tool and before installing it, I need to verify whether it satisfy the requirements or not..
    My tool need Minimum Windows Server 2003 OS with SP2..Why would a Java application need that? Sounds like something that should have been done in C#.

  • How to identify which service pack is installed in BO XI R2

    Hi,
    I am currently workng in BO XI R2. Can any one please let me know how to find which service pack is installed ?
    Below is the version number mentioned in metrics under Central management server in CMC.
    Version: 11.5.10.1263
    Thanks
    Anand

    Hi,
    take this Version Number and post it into the "Help & Support" are of the SAP Service Marketplace.
    If all of your Servers have Version 11.5.10.1263 you are running on SP4.
    For more Information check SAP Note -  1318289.
    Regards
    -Seb.

  • IQ770 crashed after service pack 1 automatic update.

    after service pack one was downloaded ,while on line i would get kicked off.eventually windows wouldnt boot up,and then received a blue screen with an error message saying windows has shut down to prevent further damage to the computer.then the computer would only boot up in safe mode.i tried system restore in safe mode,but it did not work.i called hp technical support. they told me i need to do a system recovery.i tried a system recovery through the hard drive, it went through the whole process,and i thought it was going to work,but when it was time for windows to boot up the computer froze.the tech said i need to purchase a recovery cd and it should work.i ordered it and i followed the directions and ran the cd.when the disc was complete the screen was white,and there was no response of any kind.then after a few hours i shut the computer off.when i turned it back on there was nothing but a screen with vertical colored lines,and no response.i have had the computer for 14 months when this happened.i don't know what to do? has this happened to anyone els?

    hi, ive got almost the same problem. I just haven't followed through on the back-up as far as you have. good thing, it looks like. I've almost filled my hard drive, now going on 19mos later. i wish i could help. my video is fine, i think. ive ran every free malware, virus, defender and anti spyware prog i could find for this. and got rid of a lot of supposed threats. but the problems get worse and worse. lately i cant get my hardware to work right. seems one thing after another one piece or another seems to go out. weird thing is: the drivers say they are totally updated just for some reason not working and needs to go online but wireless and ethernet both have "hardware connection errors" so i cant get the sucker online. then my system speakers are out. ive tried uninstalling, disabnling, updating via sd card and hp and microsofts sites (all the trials and errors not necessarily in chronological order) but i dont know what to do. winlogon shuts off, oembios shuts off, now i look over and windows explorer keeps going out aaaaaaarrrrrrgh, i dont have that much money to get new warranty. <text deleted> since i cant get online with mine its not up to me when i can check my email. but if someone wants to try and troubleshoot this with me via messenger if im on or email id really appreciate it. im at a loss cuz im normaly the it tech to go to for vista, but now im lost and would really appreciate any and all info or idea...even if ive tried it, maybe my sequencing was off and im willing to retry ....thanks
    Message Edited by WendyM on 08-24-2009 08:13 AM

  • Workflow errors after service pack upgrade

    Hi all,
    We have a problem with workflows after service pack upgrade. Workflows are working fine in Development system but not on test and production. Generating lot of dumps.
    What could be the reason for this ?
    'Start verification workflow' in SWU3 is giving error 'Workflow: No workflow definition found'.
    Thanks in advance

    Getting series of short dumps 'CALL_FUNCTION_REMOTE_ERROR'
    Error while calling '
      call function 'RH_GET_WFD_ID' destination 'NONE''
    But RFC destinations are working fine.

  • Coprocessor drivers missing after window 8.1 installed

    coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran  windows 7; and it did install; but will not install drivers off the file now.

    morris2672 wrote:
    coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran  windows 7; and it did install; but will not install drivers off the file now.
    What program are you talking about? Coprocessor is built into the Processor nowdays...
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Tx2510us - Fingerprint Reader Not Detected after Service Pack 1 for Windows 7 installed

    Have had Windows 7 32-Bit installed and running fine since early last year..   Today Windows Update installed Service Pack 1.
    Now, the fingerprint reader (AuthenTec AES1610) is not detected.   Digital Persona reported the fingerprint reader isn't connected and the Device Manager shows installed and working properly..   When the computer boots, the logon screen shows not detected..
    Have seen several older posts that reference a page with a fix for AuthenTec/Digital Persona, but get a 403 error when trying to access..
    Hoping someone still has this info, or possibly there's a new fix to work with Service Pack 1..
    Thanks
    ~~~~ Nothings forgotten. Nothing is ever forgotten. ~~~~

    Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
    I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
    Have again performed a roll back in order to remove SP1, now Firefox works again.
    If somebody has advice it would be very welcome!

  • Oracle and Instance Service Not Starting After Win2K Service Pack 4 Install

    Please help
    We are running Oracle 8.1.6 on Windows 2000 Server and everything ran fine. Our Network Admin installed Windows service pack 4 and now after a reboot we have to manually go in and start Oracle because it does not start automaticially.
    I've looked everywhere and cannot find any documented resolution to this problem.
    Regards,
    Andy

    If you completely patched your server then it might be related to the problems some of us are experiencing with a certain MS patch. Check this thread for more details:
    ORACLE NOT AVAILABLE..ORA 01034

  • First Page blank -Crystal Reports 2008 Service Pack 1 install issues

    Hi,
    After installation of  Crystal Reports 2008 Service Pack 1 - Redist Install on Web server. First page of all the reports are blank .But when next page is clicked next page displays information ,then previous page the report displayed.
    On loading the first page of the report is blank.
    The report is fine in Crystal reports
    After navigating to the second page - the data on the second page appears with no issues -
    Then Navigate back to the first page then the first page data appears.
    Thanks in advance .
    Regards
    Prakash

    Just to clarify why this needed to be done. The CR msm and msi files install the correct files into a bin directory. The bin directory is specific to the version of Crystal Reports. Also, the viewer files are installed into the default web site aspnet_client folder. Thus if an application is installed into a custom website, you will have issues, such as red X-es instead of images, errors, failure to load report, etc. For more documentation on this issue see these articles:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80
    Ludek

  • XP Service Pack 3 installed B4 Bootcamp 2.1

    I installed XP Service Pack 3 before I realized I should have installed Bootcamp 2.1 first.
    Now Windows XP won't start up.
    What should I do?

    How about booting from the Windows disk by pressing the Option Key at startup and choosing Boot From CD. Windows will present you with options to Repair/Restore. Choose Repair existing installation. My hope here is that it will put the installation to where you were actually able to boot up to the desktop. Once the repair is complete then you can boot to the desktop and immediately insert the Leopard CD and get the 2.1 drivers installed. After that you can install SP3.
    See if that works.
    Axel F.

  • Crystal Reports XI R2 Service Pack 3 Install Issues

    Post Author: iamtgo3
    CA Forum: Crystal Reports
    Crystal Reports XI R2 check automatically for updates when I open it. It finds an update Crystal Reports XI R2 Service Pack 3. Now when you go to install it I get this error.
    "Crystal Reports XI R2 Service Pack 3 is for Crystal Reports XI R2 only, and cannot be installed on top of other Business Objects XI R2 products."
    A while back a service packe came out for both Crystal Reports Server and Crystal Reports that would update both of them same Service Pack. I am sure this is why I now have the issue. If this is the issue then why the heck post it for updating both. Plus how can I remove other Service Pack so I can install this one? I am sure it is a reinstall of complete CR product. I have purchased CR2008 so I am just trying to buy time till Visual Studios 2008 is complete and release (Not just the 90 day trial)
    So any suggestions on how to install Crystal Reports XI R2 Service Pack 3 with my above issue would be helpful thanks.

    Hi
    You have mentioned that "There are others in my company that after they installed SP3 they were able to successfully connect and I am still getting a login fail error."
    So would like to know the version and type of database that the Universes are based on.off.
    1) Please ensure that you have the exact version and type of the database installed on your machine, that your colleagues are using .
    Say for e.g if the Universes are based off Oracle 9 database, then ensure that you have the Oracle client(version 9) installed on your machine.
    2)Please make sure that you have been added in the user list in the database.
    May be we could come close to narrowing down on the issue by checking these 2 things.

  • Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed

    I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
    Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
    Using SCCM 2007 R3
    Task Sequence installs Office Professional Plus 2010
    Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
    The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
    When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
    If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
    in my environment this will not work.
    Can anyone please suggest a solution to this problem?
    Thank you,

    Hi
    According to my research, this issue occurs when one of the following conditions are true:
    If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
    A required registry key is not set correctly or is missing.
    If you want more detailed information, please refer to the following link:
    http://support.microsoft.com/kb/2400124/en-us
    Hope it helps
    Regards

Maybe you are looking for

  • Trying to call a data bean from jsp

              I get the following error:           C:\bea\user_projects\infologic1\.\myserver\.wlnotdelete\extract\myserver_BibleApp_BibleApp\jsp_servlet\__menu.java:146:           cannot resolve symbol           probably occurred due to an error in /men

  • Error in Post Processing Action for a Conc-Request

    Hi, I am using XMLP 5.5 and facing the following issue with a particular report. The issue is not encountered when tested in the XMLP 5.5 Desktop Viewer, but gives the following error when run EBS 11i10. The following is the OPP log: [1/23/06 12:31:0

  • Connect harmony one to apple tv

    How do you connect the apple tv with a harmony one?

  • Episodes/Song in Reverse Order

    I upgraded my iPod Touch software to 2.2, and all of the chapters in my audiobook podcasts are now in reverse order. (They are downloaded from Librivox.) All of the chapters are in correct order on iTunes and when my iPod is hooked up to iTunes, the

  • Is it possible to write a result of query to a CLOB field in another table

    Hi all, I have a table with 50 columns which will ideally have around 250,000 rows. I want to select all the rows from this table and insert the result in to another table's CLOB or BLOB column. ( I think CLOB is preferred for strings !!) f.i Table1