View does not show data

Hello All,
I develop an iview which is subscribing to the employee search iview event.  so whenever manager clicks on an employee...i get some employee information from my bapi and display to the manager...the problem i am facing is that...i can not seem to get the data to display....
i did some debugging and found that bapi is returning all the required data...and also employee pernr is getting pass to bapi as well...so all is good there...
also i have this bapi call in the same action where i get the pernr from my dataObject parameter...which is filled by the event...when the manager clicks on an employee....
i thought that i might have mapping issue....so i moved the same code for calling bapi to my wddoinit method of my component controller...and assign a static pernr....it seems that mapping is correct...since i was able to see the data in my view...
i can not seem to figure out...why when i call bapi from my action...no data is visible....but when i call bapi (using the same code )from wddoinit method...my data is visible....
any input on this...
Thanks...
J.

Hi..
At first you have to check table cardinality set to 0.n or any other else..cardinality set..0.n.then create
nade instance which is mappint to ur table.after that ..you have to check back end node which is having data from backe end..if data is available then make it loop upto back end table size.then
table instance.getnodeattributElementAt(i).getAny data.
then add element into table node.
wdcontext.nodetable.addelement(element).
then iot will work fine.

Similar Messages

  • CFGRID does not show data (CF9.0)

    Under development server, CFGRID show data , all is fine , correct. (CF9.0  version dev)
    Under production server , CFGRID does not show data, only a grey line (like a HR).
    How to debug this ?
    Thanks,

    Kindly check below to troubleshoot this issue:-
    Is there any difference between your CF production & developement server setting summary?
    Is there any browser script level difference between your both CF server?
    Are you getting any relevant logging error in your CF server application.log & exception.log?
    Run a very simple cfgrid running app to check, either getting issue with that too or not.

  • IOS 7 Calendar Day View does not show any all-day events ?

    Hi,
    I realize that iOS 7 Calendar Day View  does not show any all-day events.
    Is this a bug ?
    Any help given is much appreciated.
    Thanks and Regards.

    Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

  • PMI Problem (End-to-End Monitor does not show data)

    (End-to-End Monitor does not show data)
    As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
    But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
    and shows summary:
    Errors:                     0  Average
    Open                  904  Maximum
    Successfully Completed         0  Minimum
    Overall:                  904
    I thing End-to-End Monitor doesn't get data from PMI...
    why does't show any errors, which is shows in SXMB_MONI
    Please tell me how to resolve that problem
    Thanks in Advanced
    Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

    Hi,
    A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
    This might be a reason so you can  implement the correction of the destination in a manual way as follows:
    Open the J2EE visual administrator.
    Select the Destination service.
    Select the HTTP "pmistore" destination.
    Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
    Thanks,
    Hemant

  • 4EA2 the Detail display for views does not show comments for the view

    I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
    The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
    This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.  

    Hi Penny Halsall,
    Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
    Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
    OR
    You can generate the associated HTML code from this page :
    https://developers.facebook.com/docs/plugins/
    Regards
    Sonam

  • Table or view does not exist - Data Dictionary Import Wizard(Data Modeler)

    Hi All,
    In Data Modeler, Data Dictionary Import Wizard, I'm able to connect to database.But while going to the second stage (Select Schema/Database), I'm getting an error "ORA-00942: table or view does not exist".
    I am able to select the table with select * from all_tables and I can open many tables as well.
    Could anyone tell me, whether I'm missing any privilege, that causing this error.
    Thanks in advance for you support.
    Thanks.

    Hi,
    Thanks for your response, sorry for my late reply as I was away from my place.
    Yes, it is showing "Connection established successfully".
    log file as below-
    2012-08-02 10:37:26,471 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler 3.1.1.703
    2012-08-02 10:39:42,889 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    Pls see oracle version details-
    Oracle Database 11g Enterprise Edition
    11.1.0.6.0
    64bit Production
    Thanks again and waiting for reply.

  • Page does not show data

    Hi all,
    I would appreciate any help for the following problem that I am facing.
    I have created master-detail pages sharing the same AM.
    The details page shows details of the request from 3 different VOs.
    The VOs are entity-based and I modify the VOs using the setwhereclause for my purpose.
    The master page runs fine and shows the searched request but when I goto the details page, it renders correctly but does not show any data.
    Thanks in advance.

    Hi,
    Thanks for the reply.
    The view instance and view attribute to the details page columns are already set.
    To add to the information,the AM is also used by othe pages for logic calcuation.
    After executing these pages for one of the request, when I use ther master detail page for ther same request, it works.
    But for the other requests, the details page does not return any data.
    I suppose this is linked with EO not getting updated/refreshed with the new search request in the master details page.
    If this is supposedly the reason,then how can I refresh the EO for each master detail search?
    Has anybody encountered this issue before?
    --Riyaz
    Edited by: mriyaz on Mar 7, 2009 12:29 PM

  • View does not show column type

    I have two views containing a column, which is defined exactly in the same way. One view shows the column type as VARCHAR2 (200 CHAR) and the other does not show anything as the type.
    Here is the screen shot:
    http://public.ceving.de/2012050900/postaladdress.png
    First question: why is there a difference?
    Second question: why is the type VARCHAR2 although the modeler does not know VARCHAR2 but only VARCHAR as a column type?
    Here are the definitions of the views:
    This is "user_status":
    WITH user_status_data AS
    (SELECT work_user_status_data.person_id,
    MAX(work_user_status_data.startdate) AS startdate
    FROM work_user_status_data
    GROUP BY work_user_status_data.person_id
    SELECT person.id AS tmdid,
    person_a.lastname,
    person_a.firstname,
    person_a.email AS emailaddress,
    person_a.address
    || ', '
    || person_a.zipcode
    || ' '
    || person_a.city
    || ' '
    || person_a.country AS postaladdress,
    person_a.phone,
    person_a.mobile,
    person_a.company AS organization,
    person_a.orgunit_abbr AS orgunit,
    work_user_status_data.pwdresetflag,
    work_user_status_data.lockaccount,
    work_user_status_data.primarypwd,
    work_user_status_data.expdate,
    work_user_status_data.iamtid,
    work_user_status_data.startdate,
    work_user_status_data.stopdate,
    'IN PROGRESS' AS status
    FROM person_a
    INNER JOIN ts
    ON ts.id = person_a.ts_id
    INNER JOIN person
    ON person.id = person_a.person_id
    INNER JOIN user_status_data
    ON person.id = user_status_data.person_id
    INNER JOIN work_user_status_data
    ON user_status_data.person_id = work_user_status_data.person_id
    AND user_status_data.startdate = work_user_status_data.startdate
    WHERE ts."until" IS NULL
    And this is "work_user_status":
    SELECT person.id AS tmdid,
    person_a.lastname,
    person_a.firstname,
    person_a.email AS emailaddress,
    person_a.address
    || ', '
    || person_a.zipcode
    || ' '
    || person_a.city
    || ' '
    || person_a.country AS postaladdress,
    person_a.phone,
    person_a.mobile,
    person_a.company AS organization,
    person_a.orgunit_abbr AS orgunit,
    work_user_status_data.pwdresetflag,
    work_user_status_data.lockaccount,
    work_user_status_data.primarypwd,
    work_user_status_data.expdate,
    work_user_status_data.iamtid,
    work_user_status_data.startdate,
    work_user_status_data.stopdate,
    work_user_status_data.action,
    work_user_status_data.progress
    FROM person
    INNER JOIN person_a
    ON person.id = person_a.person_id
    INNER JOIN work_user_status_data
    ON person.id = work_user_status_data.person_id
    INNER JOIN ts
    ON ts.id = person_a.ts_id
    WHERE ts."until" IS NULL
    Edited by: 931739 on 09.05.2012 06:37

    I just found out that the engineered version (10g) is also quite strange:
    http://public.ceving.de/2012050900/postaladdress_10g.png
    It shows the values in the columns for the types.
    This looks very buggy.
    Is it not recommended to create views with the data modeler?
    Edited by: 931739 on 09.05.2012 06:38

  • Internal table field does not show data.

    hello experts,
    I am currently modifying a code in a report where it shows PO's and it amount, downpayment, Invoice, GR, payment and balance. Now the problem is, some of the PO amount(it gets the amount from ekpo-netwr) does not show on the report output. the field is t_amount-netwr. I really need help on this one guys. Thanks and take care!
    PERFORM process_with_budat.
    FORM process_with_budat.
      DELETE t_pohistory WHERE hist_type <> 'A'
                           AND hist_type <> 'E'
                           AND hist_type <> 'Q'.
      LOOP AT t_account.
        DELETE it_dtl WHERE ebeln = t_account-ebeln
                        AND psphi IS initial.
        DELETE t_ekpo WHERE ebeln = t_account-ebeln
                        AND ebelp = t_account-po_item.
        t_proj-ebelp = t_account-po_item.
        SELECT SINGLE psphi FROM prps INTO t_proj-psphi
              WHERE posid = t_account-wbs_elem_e.
        CHECK sy-subrc = 0.
        LOOP AT t_pohistory WHERE po_item = t_account-po_item
                              AND ebeln   = t_account-ebeln.
          t_amount-ebeln = t_account-ebeln.
          t_amount-psphi = t_proj-psphi.
          ON CHANGE OF t_pohistory-po_item.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
          ENDON.
          IF v_ebeln IS INITIAL AND v_ebelp IS INITIAL.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
            v_ebeln = t_account-ebeln.
            v_ebelp = t_account-po_item.
          ELSEIF v_ebeln <> t_account-ebeln AND
                 v_ebelp <> t_account-po_item.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
            v_ebeln = t_account-ebeln.
            v_ebelp = t_account-po_item.
          ELSEIF v_ebeln = t_account-ebeln AND
                 v_ebelp <> t_account-po_item.
            CLEAR v_netwr.
            SELECT SINGLE netwr FROM ekpo INTO v_netwr
                  WHERE ebeln = t_account-ebeln
                    AND ebelp = t_account-po_item.
            t_amount-netwr = v_netwr.
            v_ebeln = t_account-ebeln.
            v_ebelp = t_account-po_item.
          ENDIF.
          CHECK NOT t_amount-psphi IS INITIAL.
          if t_pohistory-pstng_date LE pa_augdt.
         IF t_pohistory-pstng_date IN so_augdt.
            IF t_pohistory-db_cr_ind = 'H'.
              t_pohistory-val_loccur = - t_pohistory-val_loccur.
              t_pohistory-val_forcur = - t_pohistory-val_forcur.
              t_pohistory-cl_val_loc = - t_pohistory-cl_val_loc.
            ENDIF.
            IF t_pohistory-hist_type = 'A'.
              IF t_pohistory-currency <> 'PHP'.
                t_amount-dpamt = t_amount-dpamt + t_pohistory-val_forcur.
              ELSE.
                t_amount-dpamt = t_amount-dpamt + t_pohistory-val_loccur.
              ENDIF.
            ELSEIF t_pohistory-hist_type = 'E'.
              IF t_pohistory-currency <> 'PHP'.
                t_amount-gramt = t_amount-gramt + t_pohistory-val_forcur.
              ELSE.
        t_amount-gramt = t_amount-gramt + t_pohistory-val_loccur.
              ENDIF.
            ELSEIF t_pohistory-hist_type = 'Q'.
              IF t_pohistory-currency <> 'PHP'.
           t_amount-iramt = t_amount-iramt + t_pohistory-val_forcur.
              ELSE.
                t_amount-iramt = t_amount-iramt + t_pohistory-val_loccur.
              ENDIF.
            ENDIF.
            IF t_pohistory-currency <> 'PHP'.
              IF t_pohistory-val_loccur = 0 OR
                 t_pohistory-val_forcur = 0.
                t_amount-tramt = t_amount-iramt.
               t_amount-tramt = t_amount-dpamt.
              ELSE.
                t_amount-tramt = t_amount-iramt.
              ENDIF.
            ELSE.
              t_amount-tramt = t_amount-iramt.
             t_amount-tramt = t_pohistory-cl_val_loc + t_amount-dpamt.
            ENDIF.
            IF NOT t_pohistory-cl_val_loc IS INITIAL.
              CONCATENATE t_pohistory-mat_doc t_pohistory-doc_year
                    INTO bkpf-awkey.
             SELECT SINGLE * FROM bkpf
                   WHERE awkey = bkpf-awkey.
    *AVH - removed wrbtr and dmbtr from selection
              SELECT augdt augbl shkzg FROM bsak
                    INTO (bsak-augdt,bsak-augbl,bsak-shkzg)
                    WHERE bukrs = bkpf-bukrs
                      AND gjahr = bkpf-gjahr
                      AND belnr = bkpf-belnr.
    *AVH
                if not bsak-augbl is initial.
                  select belnr gjahr from bsak
                   into (bsak-belnr, bsak-gjahr)
                    where bukrs = bkpf-bukrs
                     and belnr = bkpf-belnr
                     and gjahr = bkpf-gjahr.
                    select awkey from bkpf
                     into v_bkpf_aw
                     where bukrs = 'GLOB'
                       and belnr = bsak-belnr
                       and gjahr = bsak-gjahr.
                      w_len = strlen( v_bkpf_aw ).
                      w_off = w_len - 4.
                      v_awkey_1 = v_bkpf_aw+0(10).
                      v_awkey_2 = v_bkpf_aw+w_off(4).
                      select single dmbtr wrbtr from ekbe
                        into (ekbe-dmbtr, ekbe-wrbtr)
                       where belnr = v_awkey_1
                         and gjahr = v_awkey_2.
    *AVH - Changed all bsak-wrbtr to ekbe-wrbtr and dmbtr to ekbe-dmbtr.
                      IF bsak-shkzg = 'H'.
                        ekbe-dmbtr = - ekbe-dmbtr.
                        ekbe-wrbtr = - ekbe-wrbtr.
                      ENDIF.
                      IF t_pohistory-currency <> 'PHP'.
                        IF bsak-augdt GT pa_augdt.
                 IF bsak-augdt IN so_augdt.
                          t_amount-tramt = t_amount-tramt + ekbe-wrbtr.
                        ENDIF.
                      ELSE.
                        IF bsak-augdt GT pa_augdt.
                 IF bsak-augdt IN so_augdt.
                          t_amount-tramt = t_amount-tramt + ekbe-dmbtr.
                        ENDIF.
                      ENDIF.
                    endselect.
                   endselect.
                  endselect.
                endif.
              ENDSELECT.
            ENDIF.
            IF t_account-distr_perc <> 0.
              t_amount-dpamt = ( t_account-distr_perc *
                                 t_amount-dpamt ) / 100.
              t_amount-gramt = ( t_account-distr_perc *
                                 t_amount-gramt ) / 100.
              t_amount-iramt = ( t_account-distr_perc *
                                 t_amount-iramt ) / 100.
              t_amount-tramt = ( t_account-distr_perc *
                                 t_amount-tramt ) / 100.
            ENDIF.
          ENDIF.
          IF t_amount-tramt < 0.
            t_amount-tramt = 0.
          ENDIF.
          t_amount-tramt = t_amount-iramt.
          t_amount-blamt = t_amount-netwr - t_amount-tramt.
          COLLECT t_amount. CLEAR t_amount.
          APPEND t_proj.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR v_netwr.
          SELECT SINGLE netwr FROM ekpo INTO v_netwr
                WHERE ebeln = t_account-ebeln
                  AND ebelp = t_account-po_item.
          t_amount-ebeln = t_account-ebeln.
          t_amount-psphi = t_proj-psphi.
          t_amount-tramt = t_amount-iramt.
          t_amount-blamt = t_amount-netwr - t_amount-tramt.
          COLLECT t_amount. CLEAR t_amount.
          APPEND t_proj.
        ENDIF.
      ENDLOOP.
    endform.
    **This is where it transfers the data**
    LOOP AT t_amount.
        it_dtl-netwr = t_amount-netwr.
        it_dtl-dpamt = t_amount-dpamt.
        it_dtl-gramt = t_amount-gramt.
        it_dtl-iramt = t_amount-iramt.
        it_dtl-tramt = t_amount-tramt.
        it_dtl-blamt = t_amount-blamt.
        MODIFY it_dtl TRANSPORTING netwr dpamt gramt
                                   iramt tramt blamt
              WHERE ebeln = t_amount-ebeln
                AND psphi = t_amount-psphi.
        CLEAR it_dtl.
      ENDLOOP.

    hi ,
    just place the code and check for a particular po if its there inthe ekpo table then it has to get it for ur select single query .
    but ur logic is build on if --- endif.check this option first of all.
    if in the debugging u see the value then as u say in the report output u r not able to see the value then the problem will be space alignment also.
    check the value in debugging and let us know first of all . okay
    vijay.
    IF v_ebeln IS INITIAL AND v_ebelp IS INITIAL.
    CLEAR v_netwr.
    SELECT SINGLE netwr FROM ekpo INTO v_netwr
    WHERE ebeln = t_account-ebeln
    AND ebelp = t_account-po_item.
    break-point.
    t_amount-netwr = v_netwr.
    v_ebeln = t_account-ebeln.
    v_ebelp = t_account-po_item.
    ELSEIF v_ebeln <> t_account-ebeln AND
    v_ebelp <> t_account-po_item.
    CLEAR v_netwr.
    SELECT SINGLE netwr FROM ekpo INTO v_netwr
    WHERE ebeln = t_account-ebeln
    AND ebelp = t_account-po_item.
    break-point.
    t_amount-netwr = v_netwr.
    v_ebeln = t_account-ebeln.
    v_ebelp = t_account-po_item.
    ELSEIF v_ebeln = t_account-ebeln AND
    v_ebelp <> t_account-po_item.
    CLEAR v_netwr.
    SELECT SINGLE netwr FROM ekpo INTO v_netwr
    WHERE ebeln = t_account-ebeln
    AND ebelp = t_account-po_item.
    break-point.
    t_amount-netwr = v_netwr.

  • PLD Report does not show data from Query

    Hello,
    SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
    Thanks,
    Nick

    Hi Nicholas,
    Please check below links.
    query based print layout design
    Print Layout Designer \Custom Reports
    How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
    http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
    Hope this help
    Regards::::
    Atul Chakraborty

  • Report does not show data , but data exists in the cube.

    Hi All,
    I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
    It shows the data if I load directly from the extractor, but not when I load data thru DSO.
    Any ideas.
    Alex(Arthur Samson)

    Hi Alex,
    I am facing same problem, i have data in cube but in report i cant see....
    i have created a generic DS, i loaded the data to DSO  then CUBE.
    data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
    i think you solve this issue... plz help me to resolve this issue.
    Regards,
    SHAIK.

  • Application Insights Online does not show data. How to find out where the problem is?

    Hi, 
    I have application insight set up, sometimes I see data online, but sometimes I don't. I am wondering how to: 
    1. Make sure the monitor is running for my application?
    2. see there is data has been sent to cloud server? I tried to run DebugView but it does not show up anything. Is there a log flag that can be turned on so I can log everything to a log file while it is being sent to server?
    Thanks.

    Hello ChadKaKit,
    You can try Fiddler2 to see whether something gets out of the box to dc.services.visualstudio.com.
    Make sure to either run application under the same account as a Fiddler or set a .NET proxy settings in web.config (app.Config for executables) to redirect to Fiddler.
    Also, you can take a look at the AI traces with PerfView:
    Perfview.exe /onlyProviders=*Microsoft-ApplicationInsights-Extensibility-Web,*Microsoft-ApplicationInsights-Core,*Microsoft-ApplicationInsights-Extensibility-RuntimeTelemetry,*Microsoft-ApplicationInsights-Extensibility-Rtia-SharedCore collect

  • Dreamweaver Design view does not show parts of the page

    Hello all,
    I was working on a page update - page was created using a
    template so
    that the client can add content with Contribute - and have
    discovered
    that suddenly whole sections of the page are no longer
    visible in Design
    Mode. This caused me some panic until I viewed in code view
    and found
    everything still in there. Viewing in browser shows the page
    there in
    entirety too, and uploads just fine. But no matter what I do
    - restart
    the program, restart the computer - nothing changes, the page
    design
    does not show parts of this page. Everything is in an
    editable area and
    should be visible.
    I have been editing the code as that was my only option, but
    now I have
    heard that my client cannot view those sections of the page
    in her
    Contribute either.
    The page is here:
    http://www.craft-design.ns.ca
    Any help would be gratefully received.
    Thanks
    Ellie

    > (I find it strange that it is now like this, as I
    understood that th was
    > depracated? So I went through and removed them all.)
    <th> deprecated? Certainly not.
    > There are editable regions in the page as it has been
    working for the past
    > year and a half. I find that after an amount of editing
    by Contribute
    > users, the pages do tend to fall apart.
    Normal template files have two editable regions in the head
    of the page -
    doctitle, and head
    The one you linked does not.
    That's what I was talking about.
    > Contribute sounds a great thing, but is a huge pain and
    ends up costing me
    > money fixing the messes my clients end up making, though
    this should not
    > be possible...
    I have stopped recommending it to my clients.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Ellie" <[email protected]> wrote in message
    news:[email protected]...
    > Thanks Murray,
    >
    > I see all this.
    >
    > (I find it strange that it is now like this, as I
    understood that th was
    > depracated? So I went through and removed them all.)
    >
    > There are editable regions in the page as it has been
    working for the past
    > year and a half. I find that after an amount of editing
    by Contribute
    > users, the pages do tend to fall apart.
    >
    > I will have to remake the template and remake the page
    from that.
    >
    > Strange thing is it was working perfectly well before.
    >
    > Thanks for the help, Murray.
    >
    > Contribute sounds a great thing, but is a huge pain and
    ends up costing me
    > money fixing the messes my clients end up making, though
    this should not
    > be possible...
    >
    > Ellie
    >
    > Murray *ACE* wrote:
    >
    >> You have no editable regions in the head of that
    page - why is that?
    >>
    >> As for the display in DW, perhaps it's the 175
    validation errors that the
    >> W3C validator finds on the page?
    >>
    >>
    http://validator.w3.org/check?verbose=1&uri=http://www.craft-design.ns.ca/mbg_past_shows.h tml
    >>
    >> Most of these are serious coding problems....
    >>
    >

  • "Library" view does not show ALL photos

    My "Library" view is not showing me the last 2 rolls I imported. If I click on the specific year views, I can see the photos, but I expect all photos are displayed in the "Library" view.
    While still running iPhoto 5, I imported a roll of images from disk that included photos taken at the end of Dec 2005 and in Jan 2006. These are the photos that do not show in the "Library" view. This was happening with iPhoto 5 and is still happening with iPhoto 6.
    Any suggestions for getting all photos to shwo in the "Library" view ?
    Thanks,
    Eliot

    Thanks -- I figured out my problem...
    Since iPhoto now seems to group items into "rolls", I had imported images from several different dates. The first image was from Sep'05, so it placed ALL the images imported, even those from Jan'06, with the Sep'05 photo in the middle of of my "Library" view.
    Is there a way to have the "Library" view sort in date order instead of by imported roll ?
    Thanks,
    Eliot

  • Viewer does not show all of the clip

    Import routine:
    MTS format from Canon > Converting to Quicktime with Voltiac software. Resolution 1920x1080.
    Impossible to set correct In and Out points in the Viewer as the whole clip is not shown. Can change the duration of the clip in the Timeline as the whole clip is shown there. After rendering there are no problems in the Canvas.
    Anybody got a solution? Would be much appreciated!
    Regards,
    Tryg

    I'd be converting to 1440x1080 because FCE does not support 1920 without rendering.
    At any rate, why the whole clip does not show up in the Viewer and does in the Canvas eludes me.
    Al

Maybe you are looking for