View Field Formatting in the Active Studio:

Hi
View Field Formatting in the Active Studio:
I need to format a date type using the Brazilian format: “dd/mm/yyyy”.
How can I create this format? What do I do to show this format?
Alexandre

Any ideas?
Thanks
Alexandre

Similar Messages

Getting 404 while view in browser from the site studio desinger..10gr4

Hi ,
Thanks for the help guys.
I have a question here...I have created a website using site studio designer and a home page ..when i right click on the home page i have created...to view in the browser..its giving me 404 error...i am not sure whats the problem is...
the url looks like this
http://myucmIpAddress/sitestudiosamplewebsite/index.htm

Hi
Reason is you have missed out to make the config changes in Apache webserver's httpd.conf file . It should be like this :
<Location "/">
IdcSecurity idc
</Location>
Restart apache after this and then test .
Thanks
Srinath

The data field format for the sql* loader

the data field in my data file was surrounded by ",", such as "1","2","3",...
so in my control file, I coded
fields terminated by ',' enclosed by '"'
no error after I execute sqlldr command.
however, on data has been inserted into table either.
if I remove "" and ,
the data field changed to 1 2 3 ...
and the data has been inserted into my table
However the first format is what I want. can anyone experienced silmilar situation? please give me a hint.
your help is highly appreciated
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Renali ():
say:
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS (
colname1,
colname2,
colname3)
the data field in my data file was surrounded by ",", such as "1","2","3",...
so in my control file, I coded
fields terminated by ',' enclosed by '"'
no error after I execute sqlldr command.
however, on data has been inserted into table either.
if I remove "" and ,
the data field changed to 1 2 3 ...
and the data has been inserted into my table
However the first format is what I want. can anyone experienced silmilar situation? please give me a hint.
your help is highly appreciated
<HR></BLOCKQUOTE>
null

Calculated Field formula not appearing in Power View Field List panel

Hi,
On Power View1 sheet of this
workbook, the two PowerPivot calculated Field formulas (First Visit and First date of FY) are not appearing in the Power View Fields panel on the right hand side.
I want to drag client and First Visit (calculated Field) to the Power View.
Why is this happening?
Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

I found a workaround for it - I was having the same problem as you. I wanted to display the last refresh date of my data, but Power View wouldn't display a date resulting from the [Last Refresh]=MAX(Date[Date]) formula.
HOWEVER, a Pivot Table can handle that Calculated field just fine. So I renamed my measure "Refreshed Date" and added another tab in the Excel Sheet. I added a Pivot Table from PowerPivot into cell A1 and the only thing I put was that single
measure (A2). To the right of that, I did =A2 and created an Excel Data Table. The title of that was "Last Refresh". Now, I could add that Data Table to the PowerPivot Model and into Power View. And then I hid that tab.
The only downside to this method, is that if you're refreshing single tables at a time, you have to remember to refresh the Pivot Table when new data is added AND update the data in the model. I'm only connecting to one database, so I just choose
"Refresh All" in Excel and it updates everything. It works perfectly! :)
Well shoot, I even took a screenshot that helped explain everything, but it won't let me post it because my account isn't verified and it won't tell me how. If you have any questions, please let me know and I'll clarify!

Have to diplay all the active employees in an Organizational unit n HR ABAP

HI,
I am new to HR ABAP.
In my selection screen I have to get the Organizational unit from the user and based on that organizational unit value i have to display the details like pernr,fname and other fields of all the active employee in that OU.
I have to use logical database in the program .
so it would be helpful if anyone of you can give some idea or send some sample programs or materials for reference.
Regards,
Kiruthi

HI,
I am new to HR ABAP.
In my selection screen I have to get the Organizational unit from the user and based on that organizational unit value i have to display the details like pernr,fname and other fields of all the active employee in that OU.
I have to use logical database in the program .
so it would be helpful if anyone of you can give some idea or send some sample programs or materials for reference.
Regards,
Kiruthi

Numberfield displaying exponetial format when the num 99999999999999948

Hi,
As mentioned in the sub,i am facing the problem with the number field format.If the number is greater than 99999999999999948 (ie 99999999999999948 + 1) then the fiels is display in exponential format(1.2e+005).
I want to display the number as it is.
I am using crystal report vertion 11.5 and front end is C#.I am using .TTX file as data connection file in the report.
Regards,
Shiva.

Hi Shiva,
Crystal Reports is built using C++ compilers and the limit for integers is 15 digits plus 1 digit for the sign of the number. There is no option to increase this.
Your only work around is break your field into pieces. You can put them back together by dropping the each field into a text box. You can keep them as a numeric field type but just be aware to not use any addition or other math fucntions on the fields that may cause them to add or subtract from each other.
Thank you
Don

Difference between refresh of Report in Active Viewer and Active Studio BAM

We use the Oracle SOA Suite with BAM (on Linux) 10.3.2.0.
I have 2 questions:
1. We have made a report with several items and in Active Studio --> Select Report --> Edit mode --> I see the correct values for my report. When I open my report in Active Viewer I see data from yesterday. The report is not being refreshed. How can I change this, what is causing this difference between Active Viewer and Active Studio in Edit mode??
2. One of my items in my report always gives the message: opening (only in Active Viewer, in Active Studio/edit mode I can see the correct data).

Is your popup blocker turned off? I can only imaging that the popup blocker may be keeping the Live Data window from appearing and updating the dashboard. Active Studio doesn't do a Live update, but an update on report load.

How do I change the numerical format of the axis in Diadem view and report

Is there a method for changing the format of the AXIS labels to show more significant digits? Second, I can't find how to display the menu shown in NI help document 3FIEI5LE. When I right click to (select properties) I get a different menu labeled (set proerties for display).
Thanks,
Doug

Hi Doug,
There is no way to configure the display of the X axis in VIEW-- this is for a quick look at or an interactive visual inspection of your data. For a fully configurable report creation environment you should switch to REPORT. Note that the last button on the top icon bar in VIEW with the tipstrip "Transfer to REPORT" will transfer what you currently have displayed in VIEW into a new REPORT layout.
In REPORT if you double-click on the numbers below the X axis, a "2D - Numeric display" configuration dialog will appear which has the field "Format:" in it. Type in "d.dddd" ("d,dddd" in Europe) or as many d's after the decimal character as you want to display. There are also other formatting options for scientific display, etc.
I honestly didn't understand your second question about the help dialog-- what version of DIAdem are you using?
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Using compressor DVD Studio Pro 4 will only accept ac3 format in the burn process. ac3 makes a nnsense of the good sound delivered, 30% reduction in volume, auto volume levelling giving unwanted volume variations. Used to be able to burn using AIFF/WAVE,

AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
Phil

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

How can we make one view field value to be copied to other field of the the

Hi
   I am new in CRM2007 I have enhanced sap component & enhanced SAP View but I wanted the field value of the enhanced view to be mapped to the field value of the same view which is added from EEWB
Pls tell me if the added new field can be made as Dropdown list box without fixed values & Design Layer customizing I mean to say through coding can we made the input field as Dropdown
Appreciate any help in advance
Thanks
Neel

Hi,
You can write your own ligic in GET_V_<FIELD> method. Select the values which needs to be displayed in the drop down list based on your own condition. Some sample code is given below:
METHOD get_v_zzverksomr.
DATA: lt_ddlb           TYPE bsp_wd_dropdown_table,
          ls_ddlb           TYPE bsp_wd_dropdown_line,
          lv_display_only   TYPE string,
          gr_ddlb_verksomr type ref to CL_CRM_UIU_DDLB,
          ls_verksomr_values TYPE LINE OF vrm_values.
    SELECT verksomr verksomrtxt FROM zkb_verks
       INTO TABLE lt_ddlb.
    IF sy-subrc EQ 0.
      INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
    ENDIF.
IF gr_ddlb_verksomr IS NOT BOUND.
    FREE gr_ddlb_verksomr.
    CREATE OBJECT gr_ddlb_verksomr
      EXPORTING
        iv_source_type = 'T'.
    LOOP AT gt_verksomr_values INTO ls_verksomr_values.
      ls_ddlb-key   = ls_verksomr_values-key.
      ls_ddlb-value = ls_verksomr_values-text.
      APPEND ls_ddlb TO lt_ddlb.
    ENDLOOP.
    gr_ddlb_verksomr->set_selection_table( it_selection_table = lt_ddlb ).
ENDIF.
rv_valuehelp_descriptor = gr_ddlb_verksomr.
ENDMETHOD.
Thanks
Swagatika

Is there a way to automatically open the Activity Viewer & make it float?

I just upgraded from Panther Mail, and I really miss knowing what was going on and having to constantly open the activity viewer and reordering the windows every time I do something. Is there a way to somehow make the activity viewer open with mail each time and keep it floating above the other windows (so I can have an indication of what's going on like in Panther Mail)?
I'm afraid I'm going to shut mail down in the middle of a crucial activity. No doubt that might well be behind all the problems that develop with it over time.
Thanks!

I had two problems relating directly to the Tiger upgrade, one I solved with help here. That was importing saved mail that failed to be imported into one mailbox, the saved messages were showing up as IMAP messages ("haven't been downloaded from the server yet"). When both my accounts were POP, I never even had an IMAP account. I solved that and everything else with mail is fine now, except I want to see what's going on like I was able to in Panther. I especially miss not seeing outgoing mail sent progress, especially with long messages.
The other issue was font related, and I still cannot get Fontbook to save the fonts I have disabled, so I just removed the duplicates manually (leaving the ones in the system folder as the defaults). As long as I don't open fontbook again, and it doesn't automatically re-enable the fonts, my system is fine. I will leave it alone now for a couple of years like I was able to in Panther. I have over 3000 fonts installed and available at all times which I need for my print work.
Other than that and a 25 minute log-in time (as it reads the fonts; in Panther it was 7 minutes and I learned to live with that) everything is finally ok.
The long log-in might also be Spotless related; I don't know enough about it to figure it out; all I know is if it is, it is a small price to pay for the way the system flies not having to index all my loaded drives all the time, not to mention the wear and tear on my drives.
Tiger is so much faster than Panther (once I shut down Spotlight) it's like having a processor upgrade. Once you work out all the glitches, it's definitely worth the money and time put in. I was very careful with the install... counting backup time the usual precautions and updates to everything afterward (including third-party programs), it took over 30 hours.
Thanks!

How to handle Multiple date formats for the same date field in SQL*Loader

Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.

The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

How to maintain the amount field format after GUI_DOWNLOAD

Hi everyone.
I have this problem on my object.
The format of field ERFMG in table AUFM is 3.921,569.
After I SELECT it INTO an internal table it becomes like this 3921.569
I would display this internal table in ALV and its ok. Its format is 3.921,569 The format is also not changed when I download it into an excel file using LIST -> EXPORT -> LOCAL FILE -> SPREADSHEET.
However my program should automatically download to local if the user tick a checkbox in the selection-screen. It will use function module GUI_DOWNLOAD. When this is used, the format of ERFMG changes to 3921.569 again, since it is using my declared internal table.
How will I use GUI_DOWNLOAD without changing the format of amount fields like ERFMG? What are my other options to do this?
The Decimal Notation in my User Profile is already set to 1.234.567,89
Thank you in advance.

Hi Cris,
To get the output in the user format for the decimals, try the following code.
data: wg_dec(7) type p decimals 2.
data: wg_dcp type usr01-dcpfm.
data: wg_dec_str(10) type c.
wg_dec = '111135.67'.
select single dcpfm from usr01
into wg_dcp
where bname = sy-uname.
move wg_dec to wg_dec_str.
if wg_dcp ne 'X'.
replace all occurrences of '.' in wg_dec_str with ',' .
endif .
write:/ wg_dec, wg_dec_str.
I dont feel there is any other option where you can change the decimals format as per the user profile.
While giving the output of decimal values in a list, the system automatically displays it in the profile set by the user.
This code will help you to set the decimal value as '.' or ',' as per the user profile.
Note: It wont add the unit separator for hundreds and thousands. Again you have to do that manually.
Hope this proves of some help to you.
Regards,
Pulkit

Concatenated field required in the DME format

Dear All,
I am using DMEE tree for the format required by the bank. In the format I need to change the field value after concatenating it.
For Eg.
If the Payment Method of the transaction is 'N' then the value in the output file will be 'N06'.
For this first I want to know which is the field available in the DME tree for the payment method.
Second how i can implement the concatenation of the field.
Thanks & Regards
Edited by: Vinda bailwar on May 3, 2011 5:48 AM

Hi,
If you want to concatenate than you need to create atoms for passing value.
Please follow the below steps:-
For Element
At attributes tab select: mapping procedure as Own Mapping(atoms) and Atom handling: 01
For payment method atom
At attributes tab select : mapping procedure as Structure Field.
At Source tab provide
Structure: FPAYH
Field name:RZAWE
For Constant '06' atom
At attributes tab select: mapping procedure as Constant.
At Source tab provide: 06
Regards,
Anand Raichura

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

View Field Formatting in the Active Studio:

Similar Messages

Maybe you are looking for