View files by default on startup
Is there a way to get rid of the prompt for each file when
Dreamweaver 8 starts up, which asks you what you want to do for
files that are not checked out (read only)? If the file is read
only, then I want to view it by default. If it is checked out...
then the program does not prompt you. This prompt is annoying since
I usually get it about 8-10 times each time I start up dreamweaver.
The prompt says: "blah.asp is a read only file and can be
viewed but not changed. What would you like to do with this file?
[View] [Check Out] [Cancel]"
Thanks for any tips!
PREFERENCES | General > Uncheck "Reopen documents on
startup".
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Eeve" <[email protected]> wrote in message
news:f1cl5q$edd$[email protected]..
> Is there a way to get rid of the prompt for each file
when Dreamweaver 8
> starts
> up, which asks you what you want to do for files that
are not checked out
> (read
> only)? If the file is read only, then I want to view it
by default. If it
> is
> checked out... then the program does not prompt you.
This prompt is
> annoying
> since I usually get it about 8-10 times each time I
start up dreamweaver.
>
> The prompt says: "blah.asp is a read only file and can
be viewed but not
> changed. What would you like to do with this file?
[View] [Check Out]
> [Cancel]"
>
> Thanks for any tips!
>
Similar Messages
-
Mail not loading a Viewer Window by default.
My question is how do I set Mail so that it does open the viewer window by default? I am running Mail 8.0 on a 2014 iMac running Yosemite.
I have tried to locate .plist files (although that is close to the edge of my expertise) and there is no "Mail" folder in Hard Drive/Library
Any advice would be awesome!My question is how do I set Mail so that it does open the viewer window by default? I am running Mail 8.0 on a 2014 iMac running Yosemite.
I have tried to locate .plist files (although that is close to the edge of my expertise) and there is no "Mail" folder in Hard Drive/Library
Any advice would be awesome! -
Bridge CC file association default not working
Greetings.
I've recently upgraded to CC from CS6. Uninstalled and removed CS6 files properly (why have them on C:/ taking up space?).
Ps, Ai, Id, all working properly (thank my lucky stars...), which are the three apps I use daily,... and Br, however, Bridge CC is acting up it seems. Screenshots for your pictorial review.
Double-clicking on a JPG, PNG, TIFF, GIF image file within Bridge CC will result in,
Right-clicking, selecting to "Open With", and selecting "Window Photo Viewer 6.1 (default)" will produce the same result.
With Ps, Ai, and Id, double-clicking a '.psd', '.ai', and '.indd' will open in their respective app. However, when selecting to "Open With", and selecting either 'Photoshop' or 'Illustrator' will result in an errors (even tho' each app shows as default):
I've checked the default settings for the respective file types involved, in Bridge CC preferences,
—PNG, GIF, and TIF files are also associated to 'Windows Photo Viewer 6.1' as show below for JPG—.
and Windows 7,
It would appear that the file types are properly associated yet Bridge CC does not read/apply these settings.
It proved useless to uninstalled/re-installed Bridge CC. Windows Photo Viewer works perfectly fine as default in Windows 7 browser.
I've read that a solution could be to uninstall all CC apps, run some kind of cleaning process and re-install apps. I find solutions rather odd; plus, it takes h-o-u-r-s to download/install each app.
I'm stumped, not to mention quite annoyed. Any thoughts?
Thank you!Thank you for your reply Curt Y, but I didn't foul anything; I followed standard procedures which I have umpteen times—prompts from the install/uninstall app which usually take place all on their own.
I read post 20, to which you referred me, however, after reading it, it appears that you may have misunderstood my situation; I'll try again, for everyone's benefit as well.
In Bridge CC:
Ps files (.psd) defaults to Ps CC when double-clicked and open in the app—no problem.
Id and Ai files also open to their respective default app—no problem either.
HOWEVER, and most interestingly, if I should "Open With" and select either 'Photoshop' or 'Illustrator", to open a '.psd' or'.ai' file respectively, I would get the errors,
While this is an issue I can work around it is not my main concern. My MAIN problem is opening JPG, PNG, GIF, BMP, and TIF files (thus far) in the Windows Photo Viewer (WPV), whose operation apparently is associated to the 'PhotoViewer.dll' file inside the Windows Photo Viewer folder.
Outside of Bridge CC the WPV works perfectly.
It is entirely absurd that one should have to launch an app (Ps, for example) every time one wants to simply view an image in a larger scale/window, such as in WPV.
It is also possible that one would want to open any of the file types listed above in Ps, for example, but as of now the "Open With" as I've described is not working properly—this I could live with.
In the end, having made the changes to the Ps string as described in "post 20", nothing has changed from my initial post.
And where would one make the appropriate string corrections for Ai?
I STILL cannot open JPG,PNG,TIF, GIF, and BMP files in Windows Photo Viewer from Bridge CC.
Thanks again. -
Windows native file dialog default sort is by date instead of name
I somehow managed to get the Windows common file dialog default sort to be by date instead of name, so I have to resort by name every time I select a VI to load. I haven't been able to identify the registry entry that tell how the MRU list is sorted. How do I make the default sort by name instead of date, short of removing and reinstalling LabVIEW?
I think its a Windows issue and nothing to do with LabVIEW since LabVIEW just calls the MS common dialog. Do you see the same behaviour when using Windows Explorer? I know that with Win2K, I can set the default folder view to always sort by date. To go back to the default, select My Computer>Tools>Folder Options>View>Reset All Folders. I don't have easy access to any computers with a different OS right now so I can't describe what the process is for them.
-
Can only view file in its blue psd format when I open them in CS6
Can only view file in its blue psd format when I open them in CS6
Is anyone else having this problem?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I am on Mac Lion. I downloaded about 36 photos from a friends storage place online.?
I usually select about 10 at a time and view in preview (default) to make my selections. But Lion is saying "blahblah.jpg is an application downloaded from the internet. Are you sure you want to open it?" These are files not applications (jpg's)
Is there no way to change this and not get the question every time? I will have to do it for every picture one at a time- what a pain. The older operating system did not do this.It's possible, but not recommended unless you're an advanced user who understands the risk. Install the free application "TinkerTool" (not "TinkerTool System"), select the Applications tab, and check the box labeled "Don't show quarantine warnings for downloaded files." Log out and log back in. This action will disable the built-in protection against malware. You've been warned.
-
After deleting files of default temporary tablespace.
I'm just doing "Practice 7" in "Administration Workshop II, Students Guide".
According to this guide I've deleted (at OS level) files of default temporary tablespace. I then restart the database and poerformed query that involves sorting of data.
According guide I should receive a message:
ORA-01157: cannot indetify/lock data file 201 - see DBWR trace file
ORA-01110: data file 201: /home/oracle/oracle/oradata/temp1.dbf
However, in my database the query runs without any problems. I then looked if the temp1.dbf file exists and it does. I suppose it was automaticaly created at database startup.
Could you tell my why is the difference in work of my database in comparison to that in student guide?
Thanks in advance.
JacekIn trace file I have this:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
External cache id: 0x0 0x0 0x0 0x0
Absolute fuzzy scn: 0x0000.00000000
Recovery fuzzy scn: 0x0000.00000000 01/01/1988 00:00:00
Terminal Recovery Stamp 01/01/1988 00:00:00
TEMP FILE #201: External File #401
ERROR: Record not owned by caller (7, 1)
(name #8) /home/oracle/oracle/oradata/orcl/temp01.dbf
creation size=2560 block size=8192 status=0x1c head=8 tail=8 dup=1
tablespace 3, index=5 krfil=1 prev_file=0
unrecoverable scn: 0x0000.0006cec7 11/20/2006 13:02:01
ORA-01122: database file 201 failed verification check
ORA-01110: data file 201: '/home/oracle/oracle/oradata/orcl/temp01.dbf'
ORA-01565: error in identifying file '/home/oracle/oracle/oradata/orcl/temp01.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-01258: unable to delete temporary file /home/oracle/oracle/oradata/orcl/temp01.dbf
I don't see any information about creation of missing tempfile, however. -
Whenever i try to open a PDF file it says " The adobe/acrobar reader that is running can not be used to view files in a web browser. Plz exit adobe/acrobat readerand exit your web browser and try again." Wt do i need to do, plz suggest.
Regards
Aditya BhargavaHi adityabhargava01-
My first suggestion is to upgrade to the most recent version of Firefox by going to this link:
http://www.mozilla.org/en-US/firefox/new/
My second suggestion is to read this article on how to many your preferences on how Firefox deals with PDFs and all other file types:
[[Options window - Applications panel]]
I hope that helps! -
How do I save PDF files by default to the folder of the source file?
How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?
I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere? -
In Lion 10.7.5 is there a way to view files in alphabetical order in column view?
In Lion 10.7.5 when viewing files/folders in column view, if I select arrange by name it does not sort the names alphabetically. Is this a bug or is there a way to view files in alphabetical order in column view?
I've been using Column View for years and have it set to None:
It has always shown in alphabetical order automatically. -
HI,
I have been using the RT Write Text File found in the following link. This demonstrates how to read and write to a text file on the cRIO and what I want to do is verify that the file is being created and that the appropriate data is being stored. How would I go about viewing files on the cRIO? I've been looking into using the NI Web-Based Configuration and Monitoring but I'm having issues with this. If someone can give me a bit of assistance that would be great.
So far I've been through Max, clicked on the NI-RIO and added the developer computer into the Remote Device Access. Also from the project window, I have added the same IP address under the VI Server in the project window and clicked the enable remote panel server under the Web Server.
I also have a question regarding to what happens to the data in a sudden shut down?
Solved!
Go to Solution.
Attachments:
Read and Write Files to Crio.PNG 31 KBHi,
remember, you can browse to a file on your remote RT system by opening a Windows Explorer and typing in FTP://ipaddres
Does this work?
This is an example how to read and write to a text file:
Read and Write to Text File on Compact RIO or Single Board RIO
https://decibel.ni.com/content/docs/DOC-9605
Regards,
Michael -
What software do I need to view files or watch movies on my imac/time capsule, from my macbook (away from home)?
imac is running lion...macbook is couple years old.
thnxIt appears you have a iPad Mini and a MacBook. Assuming that, this
About renting movies from the iTunes Store - Apple Support
says
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
This is the Mac Mini desktop forum -
Can I use Bridge to view files in Google Drive?
Is there any way to use Bridge to view files that are in a shared Google Drive folder?
Have you searched for it using the Spotlight? That's the loop icon on the right side of the upper menu bar.
-
I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?
You should be able to change the permissions on the files.. this is yet another bungle by Mavericks I suspect.
http://support.apple.com/kb/PH13799
Sometimes it is because you Migrated wrongly.
http://pondini.org/TM/E10.html
It is not up to Mavericks because sadly the guy who wrote all this great info died recently. -
Viewing file names in vlc in ipad
Hi .. I'm not sure if the topic made sense.. Here is what Im trying to do ..
Say if I'm copying bunch of episodes from a series or movies and copy to vlc via itunes, when i try to open vlc and pick any episode, it only shows me first few letters of the file. Its quite common that all the files starts with same name..(eg. Naruto_Episode or Friends_Season_ )
Is there any way to view file name and then select it accordingly ? OR is there any other software which is out there I can use for this purpose
I spent some amount of time in renaming every files before i copied them to iPad.I dont want to do that everytime ..
Any suggestions / Thoughts ?
Thanks in AdvanceCompletely agree!
What were the developers thinking when they hid info as basic as file name from users once imported. Even mom/pop videos like a hockey high lights vid might have 15-20 vid clips coming in at random times and different sources.
To make users suffer with this crippled GUI just has to be one of those decisions you cynically think were made for $$$$ reasons...
ie cripple a useful cheaper tool like iMovie so users with even modest projects has to buy/learn the more expensive tool.
Thanks apple!
Maybe you are looking for
-
What is causing the "script not running"? Why so long to open? Etc.
-
How to read and save the following XML-Doc?
Hi all, I have a XML-Document: <root> <employees> <emp1> <ename>Test1</ename> <empno>1</empno> <sal/> <ord> <item>1</item> </ord> </emp1> <emp2> <ename>Test2</ename> <empno>2</empno> <sal>1000</sal> <comm>200</comm> <ord> <item>3</item> </ord> </emp2
-
Can anyone actually answer this? Somebody has provided me with 2 links that tell me nothing. When I login into Hotmail, I get a message asking me to Download latest Firefox or use Mobile experience. When I dowloaded the latest Firefox, I got a red ci
-
How Adobe should monetize the AIR SDK and keep supporting game devs
As per the message title, someone at Adobe should take a look at this thread on the Starling Forum: http://forum.starling-framework.org/topic/whats-new-in-adobe-air/page/5#post-26940 Best Regards,
-
I've tried to upgrade to Snow Leopard 10.6.3. I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded. Any suggestions?