View Footage from FCP to Sony HDR-HC7 Camera

Hi all,
I have final cut pro and a Sony HDR-HC7 camera with a SAMSUNG external monitor. I'm trying to view edited video from FCP to my camera then through HDMI to my SAMSUNG external monitor. I can't get this to work.
This works fine through my DVDPRO deck then component to SAMSUNG external monitor.
Any ideas? Thanks in advance.
mdawg

Thanks for the answer.
Now I tried to link my iMac directly to my television (mini DVI to HDMI) to watch my movie, but I got no picture on my television. It is a Panasonic Viera, HD ready (TH-42PV60E). It has 2 HDMI inputs. Has anybody succeeded yet in doing this?

Similar Messages

Export from FCP to SONY HDR-SR11E

How can I export my movie back to my camera, a Sony HDR-SR11E handycam? I want to look at the movie on my HD-television before I go on working on it.

Thanks for the answer.
Now I tried to link my iMac directly to my television (mini DVI to HDMI) to watch my movie, but I got no picture on my television. It is a Panasonic Viera, HD ready (TH-42PV60E). It has 2 HDMI inputs. Has anybody succeeded yet in doing this?

Can import 1080i from Sony HDR-HC7, but not export it

I am helping a friend with a Sony HDR-HC7 camcorder that is capable of DV and HDV formats. They have used it without a hitch with DV shot footage on import and export to the camera. They are using iMovie HD 6.0.3. They shot footage in 1080i format and imported and edited it, without incident, but have had no success exporting the edited project back to the camera. We've gone over the in-camera settings, manual in hand a few times, with no success. We have also phoned Sony on two occasions and basically got no help from them. Always using a firewire cable and camcorder mode and connection as when working with DV, but with connection and format settings changed to reflect the format. iMovie acts like it is going through it's paces and exporting, as we are asking it to, but nothing on the camera indicates we are getting anything from the computer, as the friend is used to seeing when they have worked with DV footage - no matter how long we wait or let it go through it's paces.
Any one with this camera with success exporting it back to the camera with iMovie HD 6.0.3?

I've got the same exact problem. The most frustrating thing is it worked once...iMovie 06 seemed to recognize the camera and just started capturing the footage. Now I cannot get it to connect for the life of me. I'm in VCR mode, I'm using a 4 to 6 pin firewire cable, ect - so frustrating.

No sound when importing from a Sony HDR-HC7

Hello all together,
I bought a new Sony HDR-HC7, the camera is fantastic. There is only one thing perplexing me: When importing HD-Clips into iMovie HD 6.0.3 I cannot hear the sound that was recorded by the camera. When I play the clips, I can hear sound. What could this be?
With my old Sony TVR 33 (no HDV) I don't have this problem.
Did I forget any settings?
Thanks for advices,
Stefan

Hi Stfan:
I guess I would try the easy things first.
Make certain that " Video Play Through Camera " is
not enabled in imovie Preferences. That is
because it sends all audio through the FireWire port
and mutes it on the computer.
ake certain your video is 16-bit audio (not 12-bit).
Once you have imported (and saved) the video into
imovie, close imovie. Then unplug all firewire
devices (camera included).
Relaunch imovie. Is the audio there now?
Sue
Hi Sue,
thank you for your advice. As I use the German version I am not quite sure, if "Video Play Through Camera" is in the third tab of the iMovie-Prefs the fourth checkbox overarm? This one's unenabled. Audio is 16-bit.
Audio was alwas there in the play-mode but not in the import-mode.
Stefan
MacPro 2,66 - 2 GB RAM/PB G4 1,5 15" Mac OS X (10.4.8)

I'm trying to upload videos from my Sony HDR-CX550 camera and the files that contain the video (.cpi or .mts) are all grayed out on iMovie. I've been able to upload footage before onto Apple computers but now it doesn't seem to be working. Suggestions?

I've tried many different options including calling Apple Customer Support and talking to them for over an hour troubleshooting the issue. They couldn't do anything. I also called Sony who failed as well. Somebody please help me out. Thanks!

Hello whatif95,
Sorry to hear that you are having trouble importing video from your Sony HDR-CX550. I found an article that provides some information specific to your camera and iMovie '09:
iMovie: Importing both HD and SD content with Sony HDR series cameras
http://support.apple.com/kb/HT1793
For versions previous to iMovie ’11 v9.0.1, including iMovie ’08, ’09, and ’11 (v9.0 only):
To import the AVCHD content from the camera when MPEG-2 content has also been recorded, you must first import and erase the MPEG-2 content from the camera. You should then be able to import the AVCHD content.
I hope this helps!
Best,
Sheila M.

Min mediakälla kan inte hittas i version 13 (Sony HDR HC7)

My video source cant be found in version 13 Sony HDR HC7. It should be supported and is seen i the tuturial view but not in "Import video" menu. Cant update either????

alllanladd
Premiere Elements 13 on what computer operating system?
What are you trying to update? There should be nothing to update. There is no update to 13, like 13.1. And, the program should come with Camera Raw 8.6 which I believe is the latest version of Camera Raw.
Your Sony HDR HC7 appears to be a miniDV camcorder. Premiere Elements 13 no longer offers DV and HDV Capture. Adobe document suggests a workaround if you are interested.
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
Please review and consider and then me know if I have targeted the question that you asked.
Thank you.
ATR

Sony HDR HC7 - does it work with FCE 3.5 HD?

Is the Sony HDR HC7 capable with mac fce 3.5 hd?
thank you so much.

Hi(Bonjour)!
Yes the HC7 records HDV or standard def DV on MiniDV tape. This material can be captured via firewire (iLink or IE-1394, name it) connection without problem.
Michel Boissonneault

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

Print to video - HDV 1080i60 to Sony HDR-HC1 camera

Like many before, am struggling with print to video of HDV material captured as HDV 1080i60 to a Sony HDR-HC1 camera. Just can't figure out what settings to use, only get the darn blue screen. Have tried several settings, but no success. Does anyone know the trick? Thanks!

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

I viewed photos from the memory card of my camera without importing them to my mac air but on the next day I realized that I Lost my memory card. Is there a chance that my mac air took a back up of these photos ? Please say yes and guide me pls

I viewed photos from the memory card of my camera without importing them to my mac air but on the next day I realized that I Lost my memory card. Is there a chance that my mac air took a back up of these photos ? Please say yes and guide me through the steps to recover them. I need URGENT HELP please

If you didn't import them to Photos or copy them to the hard drive there will be no way to recover them.
How did you view them?

I Can´t get my macbook pro to recognize my Sony HDR-HC1 Camera

This is my first Mac computer in life and I´m trying to connect my sony Hdr-Hc1 camera through the firewire 800 port but there is no sign of recognition of the device on the system or on final cut or imovie.
I´ve seen a lot of topics on the matter but mostly for other model of computers, as I´ve come to notice there seems to be a solution for the matter but I haven´t been able to reach it.
Has anyone experienced this specific problem?

Plenty of discussion here:
http://discussions.apple.com/thread.jspa?threadID=303903

FCP 6 no longer 'sees' my Sony HDR-HC7. Works perfectly with iMovie HD

I used to be able to capture from and print to my HC7. Setup was saved. Now, FCP doesn't 'see' the camera with the saved settings, or when I try setting it up again from scratch. Camera connection, driver, etc. are good in that the camera works perfectly with IMovie HD. Obviously I've messed something up in FCP, but I can't find it. Suggestions?

Thanks for the response SDIllini, unfortunately when I do go the Disk Utility, my camcorder isn't even show for me to even repair the disk permissions. As monty jr stated, Sony was no help for me either, they also told me that I would need to contact Apple. The problem still remains unsolved though, it's as if the MBP just doesn't recognize the camcorder whatsoever. I'm open to any suggestions, have anymore?

Have FCP, new Sony HDR-FX7e and an iMac G5 (non intel core) please help

Hi,
This is going to be a bit of a dumb question but i need to ask to be sure of the equipement i have and if i need some new hardawre n my mac to capture the video in HD.
I have an older iMac G5, FCP and a new Sony HDR-FX7e with Belkin 4-6 pin iLink cable.
When i try to capture video that i have filmed in HD 29fps, FCP brings up an error:
Something like: Codec is wrong and also hardware card. I am guessing that the video card is not capable enough as it is the one that came with the mac. Also i am trying to capture the video onto the Hard drive which has 198Gb left. I guess this needs a firewire drive capable of teh right speed.
I am guessing here so please advise as i am so new to this you would not believe and i know it is ambitious of me to expect to plug and play but i can pick it up quickly with the right advice.
Oh, the easy set up i used was on 1080i 60
Thanks,
Neil

Neil,
1) Your best bet is to get 5.1 if you do not have it yet. It is a paid crossgrade, but as long as you have the original install discs it is a simple process.
2) The "e" at the end of your camera indicates that it is the PAL version I believe. Do you edit in PAL? or NTSC? Whichever you use just make sure to choose the proper easy setup.
3) Since you have a G5, I would suggest using that as your video machine. You can get around the firewire situation in one of two ways. First, and best in my opinion, is to purchase a second internal SATA harddrive and install it in the spare bay, set this as your "Scratch Disk" and your off. Second, buy a PCI firewire card and install this in a spare PCI slot, then connect your firewire drive to this. Or, if you feel the need, do both.
4) As for why iMovie works and FCP doesn't, the simple answer is the iMovie is a consumer program that has much lower tolerances than the PRO FCP. From what I understand, iMovie does not capture timecode and does not capture audio and video as separate files, among other things. To do these things there must be proper communication between the computer and camera.
5) Another thought is that your camera may be set to downconvert the footage to SD on output. This might also explain why you got something in iMovie and not FCP. Check in the menu system for your cam and see if it is set to downconvert.
K

DVD studio wont recognise PAL footage from FCP

OK, I have shot some footage on my Canon XL1S (PAL) and done some very minimal editing in FCP Studio, again set to DV PAL, I have added no effects as it is basically a video assessment for a friends pilates class. I have then exported it from FCP using Compressor and gone to import the footage into DVDSP...it has then told me that I cannot import NTSC formatted assets into a PAL project? Am I missing something?!

Did you create a PAL m2v in compressor?
You might confirm your workflow. Make your sequence timeline active in fcp and hit command-zero to view your sequence settings. Confirm that it's PAL pixel dimensions and 25 fps.
Either export a quicktime with current settings or send your sequence to compressor. Apply the appropriate DVD preset and then doubleclick on the item in the batch window in compressor and review your settings for the compression in the inspector. Again, confirm that it's PAL pixel dimensions and 25fps.

Sony HDR-HC7 camcorder and PB Ti with IMovie HD

Hello everyone. Im in the army and I will be deploying soon to Irak. Im looking for a good digital camcorder that will work with my PB. Im running Tiger with IMovie HD . I have been looking at different web sites and one that i like is the sony (nothing particular) HDR-HC7. Now the problem is that it is a high definition camcorder. I really dont know if my PB can handle the format or any software that it will require. Besides I dont know a lot about computers and cameras. The reason for the camera is that it has firewire connection( my PB has usb 1.1), image stabilization and good reviews for low light operations. I am a pilot and I'll doing a lot of flying at night. It also has a remote and good still pictures capabilities. Any advice or other suggestion on a good camera will be appreciated. Im I going to have issues with this particular camcorder? Anyone has this equipment setup? Can anyone suggest a good camcorder in the price range of 1000 dollars that will work with my PB? Please any advice and suggestions will be appreciated.
Gonzo

Good camcorder. But importing hi-def HDV will be -s-l-o-w- on your PowerBook, and especially on your 400 MHz G4 PowerMac.
You really do need at least a Dual G5 or a new Intel-powered machine for importing hi-def in real time, and lots of memory (1GB or more).
Hi-def also uses up much more space on your hard disc than standard-definition 13GB/hour video. So you'll need (a) more space, and (b) more patience!
When hi-def has been imported and edited the only reasonable means to create a hi-def DVD is to use Apple's (expensive) DVD Studio Pro software, or external software and hardware such as a Blu-Ray burner. (No Macs presently come with these ..and your existing Macs certainly don't have them.)
So you can shoot in hi-def with the camera ..but using that hi-def material may be problematic.
HDV isn't too good when you're shooting anything fast-moving (..because of the way the compression works..) so shooting from a pilot's seat in hi-def may give inferior results compared with shooting standard-def! ..It may look a bit sharper, but the detail won't really be there, and it may judder, compared with standard-def.
For fairly static shots, hi-def is much (about 4x) sharper.
So, the camera's good, but you may need to upgrade all the rest of your Mac equipment to match the camera's capability if you use its hi-def features. You can, of course, use the camera in standard-def ..but then that defeats the purpose of spending the money on hi-def, doesn't it..?
NOTE that all miniDV-tape camcorders have a FireWire connection, and so do your two Macs. USB is just for transferring photos, not video. Sony call the FireWire connection either 'DV' or 'i.Link', but it is normal FireWire, nevertheless. You'll also need a separate 4-pin-to-6-pin FireWire/DV/i.Link cable ..Sony doesn't put one in the box with the camcorder ..and I don't think many of the other manufacturers do, either.

View Footage from FCP to Sony HDR-HC7 Camera

Similar Messages

Maybe you are looking for