View image instantly on monitor from camera with USB connection

Hello,
What I want is to see my image instantly on monitor when I am taking a picture from example a portrait or a painting in the studio. The camera is connected with USB to the computer.
Help!!

So I was shooting teathered the other day with the following:
Nikon D100
USB to Powerbook G4, 1.25 Ghz 2GB Ram OS 10.4.8
Nikon Capture to Hot Folder
Hot Folder to Aperture
My issue was that sometimes for reasons I could not work out my
Camera would lock-up after a couple of frames shot. I was also syncing
to a couple of dynalites but I dont think it was a light re-cycle thing.
This became embarrasing as my subject was standing there and my shutter
would be locked up.
Was this an issue with maxing out the processor on the Pbook?
Or perhaps writing the file to aperture?
Would it be better to have the image display in Nikon Capture and worry bout importing into Aperture later?
After finally de-teathering and shooting normaly I never ran into the problem again.
Any thoughts appreciated.
TIA.
G5 Dual Core, AL 15" Pbook, G4 Quicksilvr, G3 Wallsteet, PM 9600, Mac SE Mac OS X (10.4.8) iPods: Nano, 4th-Gen & 1st-Gen 5Gb Original Goodness!

Similar Messages

Digital Video Camera with USB connection

If anyone can help me please let me know. I own a Sony Digital Video Camera that's 3 years old. It connects to my iMAC through a USB port. I can not figure out how to load my videos to iMovie. Is this camera too old? When I connect the USB port nothing happens; nothing appears on my desktop.

George,
i'm not sure if you can download Image Capture from the Apple Website separately or if it comes as a total download of a specific version of OSX. If you have the original system discs that came with your computer, maybe that would have it, or worst case, an option to "Restore Software." Since you camera records to a DVD, you have another option: Do a Google search for MPEG Streamclip and download it (free). Basically, MPEG Streamclip will convert the files on the DVD back to DV files for editing in iMovie. I don't have any first-hand experience with a DVD camera, so you might also need to download Apple's MPEG-2 Playback Component ($20 from Apple's site) if the video on your DVDs is in MPEG-2 format. Come to think of it, I downloaded some MPEG movies from my digital still camera (it takes simple movies) using Image Capture and I still needed to use both MPEG Streamclip and the Apple Component to get it into iMovie, so maybe skip Image Capture and go for these two programs. I know it should be easier to do than this, but unfortunately getting video back off of a DVD is not what Apple wanted you to do. They setup their movie edit programs to accept DV files. The movies on a DVD are already highly compressed, so you actually need to reverse the process and get these compressed movies back to DV. Most PC computers allow, and even suggest, that you import MPEG movies for editing, but that is toally backwards. That explains why the PC discussion boards are filled with toally frustrated and confused people. Most PC computers still don't come with Firewire. They just don't get it.

Is it possible to post pix from camera with WiFi connection, but no comp? (travelling light!)

I just set up my wireless services on my camera. I will be travelling out of the country and will not have my laptop with me, but will have WiFi access. Is it still possible to post pictures wirelessly to online platfroms such as Facebook?

struong,
A computer is required as far as setting up Web Services and registering them to your camera. However, once that is done, you can send image directly to those services as long as your camera is connected to an access point that has internet access. To do this:
Access the Wi-Fi menu on the camera.
Select a registered Web Service, like Facebook or Twitter.
Connect to an access point.
Once connected, the image transfer screen will be displayed.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Missing pin from the VGA connector of a 17" CRT monitor that came with G4?

Hi, everyone. Regarding the 17" CRT monitor that came with the G4 "Sawtooth", should the VGA connector that plugs into the video card be missing a pin? On the connector of my monitor, there are 5 pins on the top row, 4 pins (instead of 5) on the middle row, and 5 pins on the bottom row. There appears to be a pin missing from the middle row.
-John

Hi John, is it pin#9?
Pinout
1 Red out *
2 Green out *
3 Blue out *
4 Monitor ID 2 in
5 Ground
6 Red return
7 Green return
8 Blue return
9 no pin
10 Sync return
11 Monitor ID 0 in
12 Monitor ID 1 in
13 Horizonal Sync out
14 Vertical Sync out
15 reserved (monitor ID 3)

HT4101 my lightening connection from my ipad mini to camera with usb deleted the pics from my camera and did not put them on the ipad

lightning connection from my ipa mi to camera with usb delted the pics fom my camera and they are not ony ipad

Where did the movies come from?
For what you said you should be easily be able to do what you want except for:
"remove them from the ipad but still have access to them for viewing on the road or at hotel"
Home sharing only works wehn the devices are connected to the same network
Understanding Home Sharing
If they are iTunes purchases, you should be able to redownload most iTunes purchases on the road if you have an internet connection by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?

How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?
I have hundreds of pictures and I want to delete completely the imported files.
Thanks

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?

Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

I have mac book pro and recently changed to Lion. since then it will not recognise my epson r2880 printer telling me it is not connected when it plainly is with usb connection?

I have mac book pro and recently changed to Lion. since then it will not recognise my epson r2880 printer telling me it is not connected when it plainly is with usb connection?

Turn off your printer.
Go to System Preferences > Print & Scan > Printers window and delete the printer from the list, then add it back.
Turn on your printer.
Any difference?
Here are some more tips from Apple Support article.

Iphone while getting On showing itunes logo with usb connection

Dear Sir,
I was upaditng my iphone 4s for from IOS 5.1.1 to IOS 6.1.2 by connecting with a personnel hotspot wifi connection. While doing this my iphone got switch OFF and then automatically got ON and the showing " Itunes logo with usb connection with up arrow".
Also i tried to switch OFF and ON 2 to 3 times but still showing same.
Can you please assist me , what i have to do now, to get my Iphone ON as normal like before.
Awaiting for your quick response,
Thanks and Regards,
Vishal Haswani.
<Personal Information Edited By Host>

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode:
You may need to try this More than Once...
Be sure to Follow ALL the Steps..

Any network adapters with usb connection for mac?

Hi!
Sorry if this is posted in the wrong forum/section. But I need a better network adapter than what comes with my macbook. I need an adapter with usb connection. Found a lot of them, but only for windows Any software that can take a windows driver and "merge" it to the airport software on the mac os x?

Hello johannesharestad. Welcome to the Apple Discussions!
Other World Computing (OWC) carries a number of OS X-compatible USB wireless adapters that you many want to consider.

HT201210 my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night, but it doesn't change. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.

my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.

it says "itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes." I click OK
then I click the restore button
Then the box says "Are you sure you want to restore the iphone to it's factory settings? all of your.....etc." I click Restore and Update
then it goes into software update
at the end of the software update it says "Itunes has detected an iphone in recovery mode...."
All this time, the screen of the iphone stays on with USB to Itunes
I might add that while the phone was in it's first attempt at recovery mode, it was accidentally unplugged.
any suggestions?

How receive image from camera with PCI-bus

Hello all
Please help
me.
I have LV 7.1.1.
I wont
watch two and more images from cameras at the same time.
I have capture
card (PCI-bus) with 4 video-input.
What kind
of data must be transfered from this capture card to LV?
With respect
Aleksandr.

Hello Aleksandr
please provide more information, what type of video card do you have?
Have you configure the card so you can watch an image with MAX?
I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
vicente

Image quality after opening from camera RAW

Why does the image quality seem to get worse in Elements 11 once the image is opened up after editing from Camera RAW? The image looks great in the RAW screen, then once opened in Photo editor it seems pixelated, smooth lines look jagged. Is it something I am doing wrong?

Try viewing at 25%, 50% or 75%

View images in a datatable from byte[]

I am trying to view images in a datatable where the image is
a byte[]. This is what I tried... doesn't work.
<h:dataTable rows="5" value="#{AirportList.airportList}" var="airport" binding="#{AirportList.airportData}">
          <h:column>
            <f:facet name="header">
              <h:outputText value="airportCode"/>
            </f:facet>
            <h:outputText value="#{airport.airportCode}"/>
          </h:column>
          <h:column>
            <f:facet name="header">
              <h:outputText value="airportMap"/>
            </f:facet>
              <h:inputHidden id="ole" value="#{airport.airportMap}"/>
              <h:outputText value="#{AirportList.myMap}"/>
             <div>
             
              </div>
          </h:column>
          <h:column>
            <f:facet name="header">
              <h:outputText value="airportSugBook"/>
            </f:facet>
            <h:outputText value="#{airport.airportSugBook}"/>
          </h:column>
        </h:dataTable>

my backing code
public class Airport
Collection AirportList;
private UIData AirportData;
byte[] MyMap;
public Airport()
public Collection getAirportList()
    try{
      InitialContext context = new InitialContext();
      AirportLOBLocalHome home = (AirportLOBLocalHome)context.lookup("java:comp/env/ejb/local/AirportLOBLocal");
      AirportLOBLocal local = home.create();
      AirportList = local.showAirports();
      Iterator it = AirportList.iterator();
      while(it.hasNext())
        ((OtnAirportLobDetailsLocalDTO)it.next()).getAirportMap();
      return AirportList;
    catch(Throwable e)
      e.printStackTrace();
    return null;
public void setAirportList(Collection AirportList)
    this.AirportList = AirportList;
public UIData getAirportData()
    return AirportData;
public void setAirportData(UIData AirportData)
    this.AirportData = AirportData;
public byte[] getMyMap()
    OtnAirportLobDetailsLocalDTO ap = (OtnAirportLobDetailsLocalDTO)AirportData.getRowData();
    return ap.getAirportMap();
   // return null;
public void setMyMap(byte[] MyMap)
    this.MyMap = MyMap;
}

Is there a way to use import from camera with a cannon 7d CF card so that you can select only the parts of the clips that you want?

I used to use log and transfer and now in final cut x I know you are supposed to use import file, however you have to import the entire clip instead of being able to select an in and an out point of the footage being imported. This is not good for me because I have a limited amount of space and if I'm going to be converting everything to prores and only using 65% of the footage that is a huge waste. Any help or work arounds would be appreciated. Thanks!

I import from P2 and 7D cards daily, it's super easy, very fast, very simple, not so complicated.
Here's how you do it.
1- CF card in a card reader, mount on Desktop, or copy whole card contents to a folder. (P2 can read directly from inside cam)
2- Open "Import From Camera" in FCP X.
3- Click "Open Archive" button.
4- Point to CF card.
* FCP X will act like L&T now.
* Select a Range of a clip you want to import, click import button.
* Select a different Range of same clip, click import button.
* If you want whole clips, highlight one or more whole clips, import.
* Imports are ProRes 422 files.
* If you want a backup of the CF or P2 card "as is", click the Create Archive button.
Very simple, no need for thrid party BS. It's really simple and easy.
Canon DSLR's have never been able to mount the cards while inside the camera. You have always needed a card reader.

View image instantly on monitor from camera with USB connection

Similar Messages

Maybe you are looking for