View in Reporting?

What are the views in Reporting?

Hi Raina,
When ever you execute a query, it will be displayed in it's initial view ( as per design in query designer).
Assume you performed view changes, for example say, by adding drill downs, exchanging char's , making a field to be displayed as keyt and text etc...
Now if you would like to see data always in this format that you have made, you need to save this format as an query view.
So, Next time when you open query view, you can see data in the format you designed earlier ( and not the design format as per query designer)
It is possible to have many query views for a single query.
Regards,
Sagar

Similar Messages

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Not able to view any report in BI Publisher 11g

Hello All
I have installed BI Publisher 11g in Intel Solaris 10. I started of from the scratch, created a Data Model, then created a Report. but now I am not able to view the report. Upon clicking the report name or Open it logs me out.
I am logged in as user, weblogic the default user created while installation.
Please help
Ash

Hi Rony,
You may have created the report initially with Web Layout only - therefore there will no paper layout.
To 'get' the paper layout back, select your Report module name from the Builder and then select Tools-->Report Wizard. Select 'Create both web and Paper Layout' and then go through the various wizard steps.
Best of Luck.
Regards,
John

Can't view Crystal Reports from BW

Hi,
I'm installing SAP Integration Kit XI 3.1 SP3 with IIS. I am able to publish reports from BW to BOE but not able view them from BW. I followed the documentation to use report/report_view.aspx to define the viewer application in Content Administration Workbench. But it is giving me a "The page cannot be found" error when I try to view Crystal Reports from BW. I tried looking for the file report/report.aspx but cannot find it. I was able to locate the file in SAP_CrystalReport_View/report_view.aspx. I repointed the system to this path but it still giving me the same error.
Anybody here encountered this before?
Thanks,
Elijah

Hi Ingo,
- has the report being saved to BW and then published to BusinessObjects enterprise ?
    Yes, the report is being published from BW to BOE successfully.
- did you import the ABAP Transports to the BW system ?
    I imported all the transports that came with the Integration Kit. I'm not sure if the ABAP transport is one of them.
- has the viewing service in transaction SICF been configured ?
    Yes, the top entry in the handler list is /CRYSTAL/CL_BW_HTTP_HANDLER.
I did notice that the BW system is on a different subdomain than the web application server. For example,
   BW system        - bw01.us.mydomain.com
   BOE web server -   boweb.mydomain.com
Would that affect the single sign on?

Visual Studio 2010 Upgrade - Unable to view some reports

I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?

OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
And here is what I posted to start the thread that I am replying to:
I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?
As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging. I have also tried deleting a report and adding it back in but it made no difference.
Is this enough information?

View Crystal Report Layout for my UDO Form

Hi all,
I try to view a report created for my UDO form. I set all settings in Administration -> Setup -> General -> Report and Layout Manager. Now I wonder what should be assigned to eventInfo.LayoutKey. I tried assigned report's DocCode from RDOC, DocEntry of my UDO object or UDO Code but nothing works. Always get an error: Incorrect format of argument or something like that - I didn't get an error in English so I tried to translate it.
How to show a report layout for my UDO form?
Regards
Szymon Lipnicki

Hi and thanks for Your reply.
Help file contains example how to open report layout prepare in Crystla Reports designer for UDO form.
//Add Layout Key Event Handler
SBO_Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SBO_Application_LayoutKeyEvent);
void SBO_Application_LayoutKeyEvent(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
    BubbleEvent = true;
    if (eventInfo.ReportTemplate == "A001" && eventInfo.ReportCode == "A001001")
        eventInfo.LayoutKey = 1; //Set the key of the layout
I am using SAP 8.81.
Regards
Szymon

How to call database view in report

Hi i have a small problem in report
the problem is like this i had created a database view in which i got all the values displayed but can any one of you tell me how to declare this database view in report with example
i had created a database view named as znew1
and the fields are
             LIFNR LIKE EKKO-LIFNR,
             EBELN LIKE EKKO-EBELN,
             LIFNR1 LIKE LFA1-LIFNR,
             NAME1 LIKE LFA1-NAME1,
             EKBE   LIKE EKBE-EBELN,
             VGABE LIKE EKBE-VGABE,
             MATNR LIKE EKPO-MATNR,
             WERKS LIKE EKPO-WERKS,
             NETWR LIKE EKPO-NETWR,
             MENGE LIKE EKPO-MENGE,
             MWSKZ LIKE EKPO-MWSKZ,
             TXZ01 LIKE EKPO-TXZ01,
             KOSTL LIKE EKKN-KOSTL,
        PS_PSP_PNR LIKE EKKN-PS_PSP_PNR,
             EBELN1 LIKE EKKN-EBELN,

Hi Mr. Rich
This is the program code and i want this output int he alv grid format
TABLES:EKKO,EKBE,EKPO.
DATA:BEGIN OF RTAB_ALV OCCURS 30,
             LIFNR LIKE EKKO-LIFNR,
             EBELN LIKE EKKO-EBELN,
             LIFNR1 LIKE LFA1-LIFNR,
             NAME1 LIKE LFA1-NAME1,
             EKBE   LIKE EKBE-EBELN,
             VGABE LIKE EKBE-VGABE,
             MATNR LIKE EKPO-MATNR,
             WERKS LIKE EKPO-WERKS,
             NETWR LIKE EKPO-NETWR,
             MENGE LIKE EKPO-MENGE,
             MWSKZ LIKE EKPO-MWSKZ,
             TXZ01 LIKE EKPO-TXZ01,
             KOSTL LIKE EKKN-KOSTL,
        PS_PSP_PNR LIKE EKKN-PS_PSP_PNR,
             EBELN1 LIKE EKKN-EBELN,
     END OF RTAB_ALV.
DATA:IZNEW1 TYPE TABLE OF ZNEW1 WITH HEADER LINE.
select * into table IZNEW1 FROM ZNEW1 UP TO 10000 ROWS.

Problem with viewing a report in InfoView

Post Author: Florian
CA Forum: Desktop Intelligence Reporting
Hi there,I'm using Crystal Reports Server XI (evaluation version)in InfoView, I browsed to the folder that contains my Crystal Reports.Now I expect to click on the reportname and be able to pass parameters and view the reports. (as demonstrated here: http://www.businessobjects.com/global/flash/products/reporting/crxi_reportviewing.asp )Unfortunately, this does not work. When the report wasn't executed in the past, I'm not able to click on the reportname. When there are old instances of the reports (created via scheduling), InfoView just shows me the newest version when I click on the name.Isn't it possible to view the report ad hoc? Best regards,Florian

Post Author: Florian
CA Forum: Desktop Intelligence Reporting
OK, resolved it.finally found the 'View on demand' option Regards,Florian

How to view deski report in html format ?

Hi,
I use BO XI R2. I use jsp.
I just want to know how to view deski report in a html format.
thanks a lot.
hatoug

Since you're using JSP, please post to the Java support forum:
Java SDK Application Development
or
SAP Crystal Reports, version for Eclipse

View Crystal Report File from SDK

Hello All,
I want to View Crystal Report File (.rpt file) from SDK (using VB 6 )
I have already try following code on my Add On :
   Public Sub RunCrystalReport()
   Dim crlApp As New CRAXDDRT.Application
   Dim crlRep As CRAXDDRT.Report
   Set crlRep = crlApp.OpenReport("D:\ReportTest.rpt")
   Dim CRAX2 As CrystalActiveXReportViewerLib12Ctl.CrystalActiveXReportViewer
   Set CRAX2 = Form2.CRAX
   CRAX2.ReportSource = crlRep
   CRAX2.ViewReport
   End Sub
But, nothing happen
Could some one help one for this ?
Thanks a lot
Regards,
Arie
SDK Beginner

Amazing Sir !!...
I could run my report through B1 SDK right now...
Many thanks to you Sir..
Just one more thing, The Horisontal and Vertivcal Scroll control wasn't appear. Do I have to add scroll object or someting like that
Many thanks again to you Mr. Porcelli
Arie

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

XML Publisher error while viewing a report

I get the following error while viewing a report I have just written using a data template:
The report cannot be rendered because of an error, please contact the administrator.
I am using XML Publisher 562 Enterprise.
The Data template I have loaded is as follows:
<dataTemplate name="FLEETMASTERS" description="Fleet Masters Listing">
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT fm.fms_id, fm.reg_no, fm.vsn, fm.vin
                 FROM fleet_masters fm
                 WHERE rownum <= 100]]>
          </sqlStatement>
     </dataQuery>
</dataTemplate>
The rtf template loaded is simply
Fms Id     Reg No     Vin
F FMS_ID REG_NO VIN E
If I use a Data Model using a SQL Query and type in above select statement, it works fine. The moment I use a Data Template I get the error mentioned above.
A dump of the error in the log is
[080406_041655194][][EXCEPTION] java.lang.IndexOutOfBoundsException: Index: 0, S
ize: 0
at com.sun.java.util.collections.ArrayList.RangeCheck(ArrayList.java:492
at com.sun.java.util.collections.ArrayList.get(ArrayList.java:306)
at oracle.apps.xdo.dataengine.DataTemplateParser.getParentDataSource(Dat
aTemplateParser.java:1449)
at oracle.apps.xdo.dataengine.XMLPGEN.writeDefaultGroup(XMLPGEN.java:298
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:2
64)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:229)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.ja
va:336)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.callDataP
rocessor(AdvancedQueryBoundValue11.java:126)
at oracle.apps.xdo.servlet.data.bind.AdvancedQueryBoundValue11.getValue(
AdvancedQueryBoundValue11.java:79)
at oracle.apps.xdo.servlet.ReportContextImplV11.getReportXMLData(ReportC
ontextImplV11.java:335)
at oracle.apps.xdo.servlet.XDOProcessor.process(XDOProcessor.java:235)
at oracle.apps.xdo.servlet.ReportImpl.renderBody(ReportImpl.java:227)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBody(ReportImpl.java:4
6)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:319)
at oracle.apps.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:223)
at oracle.apps.xdo.servlet.XDOServlet.doGet(XDOServlet.java:159)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterC
hain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilt
er.java:52)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:629)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequ
estHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpReque
stHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSo
cketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
If anyone has experienced something similar please help.
Thank you

Okay some more information:
If I change the data template to this
<dataTemplate name="FLEETMASTERS" description="Fleet Masters Listing">
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT fms.fms_id FMS_ID, fm.reg_no REG_NO , fm.vin VIN
                 FROM fleet_masters fm
                 WHERE fm.fms_id BETWEEN 55531 and 55620 ]]>
          </sqlStatement>
     </dataQuery>
</dataTemplate>
I only get the titles being printed but no errors i.e the select does not seem to retrieve data from the database(85 records in database). If I remove the where clause I get the same titles as per the template with no data(49089 records in Database).
Layout of template
Fms Id Reg No Vin
Now it begs the question, is XML Publisher finicky about the syntaxes you can use inside the "sqlStatement" clause?
I have to say that this is really frustrating as I have had no successes using Data Templates

How to allow normal/regular users to view a report

I have been compiling reports in MS SQL 2012 Reporting Services. the URLs is
http://test_report:80/reports. I have no problem with viewing the reports because I am an admin but normal users are getting access denied. this is how I assign permission to user. Open Reporting Services
Config Mnger --> Connect --> Click on Report Mnger URL --> click on
http://test_report:80/reports --> Open a another folder called Reports. In this "Reports" it has many reports. --> Click on Folder Settings --> Click on Security --> Click on "New Role Assignment" -->
In "Group or user name" text box, I entered user network computer login name, such as: domain_name\bambi --> Ensure "Browser" is checked --> Ok. I send this weblink to users but they cannot open it because of either access denied
or not have permission.
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fCorp_Reports%2fReportOfTimeInLieu. I am unsure why users cannot view my reports. Please let me know if I had missed any step(s). I use the Report Builders in Reporting Services
Config Mnger to compile reports. Regards,

so this web link will lead me to Home page:
http://myservername/Reports/Pages/Folder.aspx.
at the home page I have folder called Reports:
http://myservername/Reports/Pages/Folder.aspx?ItemPath=%2fReports&ViewMode=List
inside Reports folder, I have multiple reports, ie:
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfTimeInLieu,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfVacationTime,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfSickDays,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfConferenceDays
On Home page I click on Folder Settings --> Security --> New Role Assignment --> Group or User name: domainname\bambi --> Role = Browser
On Home page I click on Site Settings --> Security --> New Role Assignment -> Group or User name: domainname\bambi --> Role = System User
On Home page I open Reports folder --> Site Settings --> Security --> new Role Assignment --> Group or User name: domainname\bambi --> Role = System User
Is this how I enable user bambi to 1) enable to open Reports folder and also browse for reports in Reports folder 2) enable user bambi to execute all reports in Reports folder.
Problem: user bambi was able to open Reports folder and see all reports saved in it; however, bambi gets a blank page upon selecting a report and open/run it. bambi should see company logo and report name. It was a blank white page.
What did I do incorrectly?
Thanks,

How to view the reports in excel

created repots in excel, then how the user will view the reports.what we must provide to the user

First of all, user should installed Spreadsheet Addin
Then, we would need to provide an access to the particular application.
Regards
Cnee

Unable to view the reports in PDF from Workspace

Hi Experts,
I am able to view reports using Worksapce in HTML but not in PDF whereas ghostscript is installed on the FR reporting server. Bin and Lib folder of ghostscript are also in PATH of FR host. Please help how can I view the reports in PDF format.
Thanks a lot in advance.
-Naveed-

Hi Vivek,
Thanks for your reply. I am using the Hyperion Financial Reporting (11.1.1.3) server on Windows 2003 32 bit and GNU Ghostscript is only available for unix type of OS. On one of our old 9.3.x env on Windows 2003 is working fine with regular ghostscript. So seems issue is something else. Is any log files which I can review and post the error for you ?
Thanks
-Naveed-

Is it Possible to 'Re-view' a Report?

I see the ease of 'Re-running' something in the history, but can I 'Re-view' a report or result for which the result window was closed.
Thanks.

Connect the iPod to your computer. Make sure that you are signed inot your iTunes account in iTunes. The restore the iPOd to factory defaults/new iPod. Se the restoring topic of:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

View in Reporting?

Similar Messages

Maybe you are looking for