View iPad screen on tv using vid cables
I want to see what is on my iPad screen on my tv when using the cable connection but only can see videos played.
but , can somebody tell me why? digtial av adapter connect to TV.
can"not see all screen in the tv?
i guess that because tv" software could not support!
my e-mail : [email protected]
Message was edited by: yen hsun
Similar Messages
-
How can I view ipad screen on computer, when I pad display is broken but internal system works
how can I view ipad screen on computer, when I pad display is broken but internal system works
THIS WORKS FOR ME
ON MAIN SCREEN GO INTO VIDEOS THEN SETTINGS ON NEXT SCREEN
SET TV OUT TO EITHER "ASK" OR "ON"
TV SIGNAL SET TO PAL
FIT TO SCREEN SET TO ON
REMAINING SETTINGS TO OFF
CONNECT TO TV SCART OR RED,WHITE YELLOW SOCKETS WITH IPOD/TV LEAD AND AWAY YOU GO. -
Bought av adapter to watch iPad on tv. Plugged it in iPad and received message not compatible. Both are apple products. Unable to view movies on tv from iPad. I also used hdmi cable
Every consider an AppleTV for same? no cables, no fuss, LOTS of free content, very handy.
-
Is it possible to view my ipad screen on my imac? What steps are necessary to set this up.?
I can view the ipad on my tv using apple tv, but need to know if it is possible to view my ipad on my imac.
I'm using osx 10.8.2.Google search provided good results
http://ipadinsight.com/ipad-tips-tricks/how-to-use-airplay-mirroring-from-ipad-t o-apple-tv-or-a-mac/ -
Crackling noise while viewing Sky TV in bedroom using RF cable
Hi, We currently have a sky box in the livingroom. As we seem to have a really bad signal in our bedroom we cannot use freeview in there. We also cannot get Sky multiroom as we live in a flat. We now stream Sky from the livingroom to the bedroom TV using a RF cable from Sky box to output in livingroom and RF cable from output in bedroom into that TV. This generally works well and the picture is ok however we get a loud crackling noise every so often that we cant seem to stop, lately this noise has gotten more frequent and louder. Can anyone advise why this is happening and how to fix it? Thanks.
Hopefully that will make it easier to fix!
Try changing the RF Output Channel your Sky box is using. By default it's set to channel 68. Try a channel at the other end of the range - say 25.
To do this. key Services,0,0,1,Select on your remote to get to the Installer Menu. Don't pause between key presses, don't wait for the screen to change and don't forget the Select at the end! At the Installer Menu, you'll see the RF Output tab where you'll find the Output Channel setting. Change to 25 and press Green to save the change.
Onceyou've done this, you'll need to re-scan for channels on your bedroom tv, using its setup menu.
You may need to try several RF Output Channels before you find one that works reliably. -
Fit view to screen on AirPlay?
Any chance there's a way to fit the view in ACV or from the actual app on the screen using AirPlay/Apple TV? Is this going to be a feature in the future? I'd like to be able to use the apps made from DPS as sort of a presentation backdrop this way on some big screens.
Fit view to screen only works with vids as far as I know. iPad apps stay at the same dims.There are two ways to Zoom the Display in and out.
One is holding the Control key, then Scrolling up and down with the Mouse or Track Pad.
The second is using a set of key commands.
In Mountain Lion, go to: "Apple > System Preferences > Accessibility" to make changes and/or familiarize yourself with the Zoom features. -
I have had my iPad since December and have always been careful with it, cleaned it regularly etc.
But just recently 3 deep scratches have appeared on my screen and they distort the image below them. I have been looking for a protector screen for it but apple doesn't sell them and no computer type stores near me do either.
Has anyone had the same problem and if so, did you go to the genius bar? And what did they make of it?The Genius Bar will do nothing, scratches are user damage and are not covered by warranty.
If they were not there when you got the device then you are responsible for the damage.
Amazon sell iPad screen protectors, just use Google. -
I have checked on a couple of places where it shows how to use a cable to connect the ipad to a computer and share the ipad screen but through the meeting room on the computer. Is there any way of doing it all from the ipad or tablet device (Android based)?
Thanks for your help!!No, this functionality is not available on mobile devices. You can mirror your screen onto a computer, as you mentioned above, but that is the only option.
-
How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! RegardsHi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards -
I have a dynex 32" lcd tv and a pavilion dv6 and cant view the laptop on the tv using hdmi cables
trying to view netfilx my computer has windows 7 when i plug in the hdmi cable in the computer screen goes black and there is no signal on tv
I'm having the exact same problem. I have a Pavilion dv6 running Windows 7, and I have a Dynex TV I was planning to use as an external monitor. The HDMI cable didn't work; as soon as I connected the computer to the TV using the cable, the computer screen went gray and no further commands would work. TV said 'No signal'. Did you ever resolve your problem? Should I try a VGA cable?
Note that I connected the same tv to a different computer using the same HDMI cable and *SNAP* it came on instantly.
asantiago428 wrote:
trying to view netfilx my computer has windows 7 when i plug in the hdmi cable in the computer screen goes black and there is no signal on tv -
I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?
Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore -
How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.
The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.
-
My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
Has anyone asked Apple directly about this?Hi there Apples or Pears,
I would recommend taking a look at the troubleshooting steps found in the articles below.
Charging your iPod battery
http://support.apple.com/kb/ht1384
iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
-Griff W. -
How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/
Maybe you are looking for
-
Local documentation for coldfusion 9
Hi, I have recently installed a 30 day evaluation copy coldfusion 9 on a RHEL5 64 bit linux server and we are waiting for a purchase to get a registration code... I cannot see any option for local documentation. The "Documentation" link takes me to
-
Dbms_java.grant_permission() help
Hi, As system I have execute the dbms_java.grant_permission('SCOTT','java.io.FilePermission','/tmp/ls.txt','read,write,execute') which went through fine. In the java procedure I am trying to access the /tmp/ls.txt file. When I execute the procedure I
-
Who is Who - dropdown list for fields in the advance search
Hello: In the advance search of the Who is Who service, we have the Organization Unit and Cost Center as searching fields. We can't be able to see the dropdown list for these 2 fields from the Portal. Do anyone have any idea of what configuration is
-
Hello, yesterday i use my Mac Mini for make some Downloads, and after done i turn he off by quick press power button (i are using Windows XP PRO). Today when i try start he again, get black screen, no sound, no video, just the power led flashing gree
-
I'm very new to Applescript and I can't quite work out how to format the current date and time. set theDate to (current date) as string returns Wednesday, 5 January 2011 18:00:13 set theDate to short date string of (current date) returns 05/01/2011,