View issue in web template

Hi,
I have created a view on my query using the 0ANALYZER. But when I run this using WAD my query returns results but the view takes a long time. The view is restricted by a hierarchy node and there is also another hierarchy in the query.Now when the view finally comes up it is not displaying the second hierarchy(the first hierarchy on which I restricted is displayed) but gives me a flat list of all the elements in the second one.
Here is the message I get:
<b>Diagnosis</b>
You tried to filter according to an invalid value.
This could be because you filtered according to a hierarchy node which is not visible to the current user.
<b>System response</b>
The filter is not evaluated for the characteristic, but removed instead. If no other filter values exist for this characteristic, the system responds to the whole request with the message "no applicable data found".
<b>Procedure</b>
If you receive the message "no applicable data found", execute a navigation step, in other words, filter according to another value.
<b>Procedure for System Administration</b>
  Notification Number BRAIN 502 
Waiting for your feedback on this issue.
Thanks,
Kal

Sally,
The programs mentioned by you are for executing a template  / viweing the HTML code within the template.
Go to RSRT and select HTML from the dropdown and then give the following line in the text box below :
&template_id=<your template Technical name>
Also try clearing your HTTP cache in SMICM and then try...
Edited by: Arun Varadarajan on Jan 6, 2010 2:08 AM

Similar Messages

  • View previous precalculated web template

    Hi,
    I'm working with Reporting Agent, because I need Precalculated Web Templates in my portal.
    I need to access, not only, the last precalculated Web Template (i.e. this month), but also the others (previous months)!
    How can I view previous precalculated web template?
    Could anyone help me?!
    Thanks in Advanced
    Fede

    ... no, I'm not using download scheduler at the moment! (I have tryed to use it, but it doesn't load my .gif  and .css from /bw/Mime/Customer/Images/)
    In BW Reporting Agent there is Document Overview section, where I can see the history of my precalculated web templates, how could I access them?!
    thanks...

  • Issue in web template (version 3.x )

    Hi Experts,
    we have web templates in 3.x versions. Today, some changes were done in the Bex queries underlined.
    Normally, the changes in the Bex query will be reflected correctly in the web templates without any problem (no need to adjust the web templates). However, we are having issues - the web template doesn't display the changes made in the query.
    If you have any ideas how to fix this issue, please help me.
    I found two programs:
    RS_TEMPLATE_MAINTAIN
    RS_TEMPLATE_MAINTAIN_70
    Does any expert know, if I could use one of the to generate the template in production without damaging anything?
    Thanks!
    Sally

    Sally,
    The programs mentioned by you are for executing a template  / viweing the HTML code within the template.
    Go to RSRT and select HTML from the dropdown and then give the following line in the text box below :
    &template_id=<your template Technical name>
    Also try clearing your HTTP cache in SMICM and then try...
    Edited by: Arun Varadarajan on Jan 6, 2010 2:08 AM

  • How to Create/Modify/Delete a query view from the web template in BI 7.0

    All:
    In BW 3.5, the <b>Query Selection View</b>  web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
    The Query Selection View web item <u>does not</u> exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
    Can anyone share how to create,modify,save or delete a <b>query view</b> on the web in BI 7.0
    Thanks,
    Kumar

    Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

  • Displaying query view name in web template.

    Hi all,
    In the standard web template (0ANALYSIS_PATTERN) there is a text box which displays the query title.  I need to change this so it displays the name of the query view instead of the query.  Does anyone know how to do this?
    Many thanks,
    Nick.

    Hi Nick,
    In the template you need not to do any special setting for Query View Name display.
    When You use a query view in template that becomes as a data provider, so for every data provider whether that's a query or query view it works same.
    You can select to display query technical name or description.
    Hope i understood your requirement correctly. If not than please correct me.
    Thanks
    Dipika Tyagi

  • Remove "inforarea" option when press "open view" in 0ADHOC web template

    hello expert,
    in a web template 0ADHOC, when you click on "open view" it gives you the option to select your view from history, favorites, roles, and infoarea. 
    I'd would like to remove the possibility to select a view from "infoarea" in the web template (a little bit like hiding the infoarea button in Bex using S_RS_FOLD).
    How can I achieve this?
    Many thks in advance,
    /Sid

    hi,
    I have just made a test:
    I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
    then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
    so those texts are exist as well
    Only question is: does those texts numbers same for all systems?
    Regards,
    Andrzej

  • Displaying name of the Used Query-View in a Web Template

    Hello Experts,
    I am using a Query View as Dataprovider in a Web Template.
    Now I would like to display the name of the View.
    But with a Text Element this isn't possible.
    You can only display the name of the Query.
    Is there a way to display the name of the used Query-View?
    Thank you for your help.
    D.Kramer

    Hi Sumit,
    hi Björn,
    thank you for your hints.
    We use a template to enable users to create Views.
    So its dynamic.
    That way we don't know the Name of the Views in advance.
    (So putting the text into 'Title' is not possible)
    We already use the "Query View Selection". This works out for users that are able to see different Views. (Power User)
    But is it also possible to display the Query View Name in an Item or with html methods for those templates where there is only one View (as dataprovider) we don't know in advance?
    Thanks again.
    D.Kramer

  • Views in a Web Template

    Hi,
    I created a ZZ web template with 4 analysis web items for 4 views.
    These 4 views are generated on a query.
    My requirement is to schedule the web template using bex broadcaster to send daily email as PDF.
    When i tested the PDF attachment...it looks well apart from
    How/where can i make a setting that output of every view will start in a new page in the PDF.
    Example: At present if the view 1 display results in 1 and half page ad the veiw2 is starting in the same page
    But my requirment is the output of view should start from page 3
    Please update

    Hi,
    have you managed the page break per view? If so, please put some light on it - I have the same customer request...
    Thank you!
    Best Regards,
    Volker Schottdorf

  • SAP BW Web Report : Web Template

    Hi,
    I have created a SAP Query view and a web template.  Then i have created the web report using the below URL.
    http://port/sap/bw/Pub?sap-language=EN&cmd=ldoc&TEMPLATE_ID=TEMPLATE1
    Later i added filter condition sin the web template and created the URL which filter values for that particular Cost Center.
    http://port/sap/bw/PUB?SAP-LANGUAGE=EN&CMD=LDOC&FILTER_VALUE=7&TEMPLATE_ID=TEMPLATE1&FILTER_IOBJNM_1=COSTCENTERA&FILTER_VALUE_1=7046
    I face issues with the below points.
    1.     Now the Title of the web report has to be changed.  Where can i change this ? ( HTML code / web template ) 
    2.     The Title of the report is selected from a Region Value from the .css file.  Is there any relation between this fiel and ABAP code at the backend.
    3.     The Cost center has hierarchy values at the back end.  Even if I do not enable the hierarchy for Cost center, I get values for that parent node.  But the child nodes show extra projects if hierarchy is enabled.  Should that be enabled ?
    4.     In the view I am getting both the fileds Cost centerA and Costcenter B.  But  in the report for filter COSTCENTERA=7046, I get only COSTCENTERB and vise-versa.  What could be the reason ? What should I do to get both the fileds in the Web report.
    Appreciating your valuable suggestions on the above points.
    Please help me in resolving these issues. 
    Many thanks
    Eswari.B

    Hi Vlad,
    I revised the code as below and now Iam able to sucessfully execute the report in BPS layout, however the BPS variable value is not passing to the BI Report; any ideas... Thanks Again...
    <iframe id="BPSREPOR"
    name="BPS Report"
    src="/sap/bi/mime/bex/icons/pixel.gif"
    width="1000" height="600"></iframe>
    <script language="JavaScript" type="text/javascript">
    var frame = document.getElementById( 'BPSREPOR' );
    var url = 'http://wbvmburpr10.warnerbros.com:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=';
    var filter = '&FILTER_IOBJNM=0COMP_CODE&FILTER_COLLAPS=&FILTER_VALUE_EXT=';
    // Example using fiscal year 2004 and variant K4: K4/2004 => comp = #K4/#
    var comp = '';
    var appl = 'BPSREPOR';
    var varvl = '<%descr(BPS_VARIABLE/value)%>';
    // Option: Adjust the 'SELECT' to your local language
    if (varvl != "" && varvl != "-- SELECT --"){
    // expected formatting of variable selector: Text(Key) or Key
    var convert = /((.*))/;
    convert.exec(varvl);
    // If there is value in brackets it is the key
    if ( RegExp.$1 != "") varvl = RegExp.$1;
    // create URL
    url = url + appl + filter + varvl;
    alert (url);
    // remove possible white spaces
    url = url.replace(/ /,"");
    // set source attribute of iframe to new URL
    frame.src = url;
    </script>

  • 500 Internal server error in web template  for specific users

    Hi We have issue with Web templates for some of the users giving error  "500 internal Server Error", all other users able to run the same report.
    We have authorization for the user and following variable which will give target currency selection in variable screen.
    SAP BI Environment
    BI Java : Release: 7 - Patch level: 0000000107 - Description: BI Web Applications Java - Additional info:  - Production mode: true  BI JAVA SPS : 7, Patch : 0
    BI ABAP : Release: 701 - Patch level: 0007 - Description: SAP Business Warehouse (PBICLNT005) - Additional info:  - Production mode: true
    Java Virtual Machine : Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_28-b03
    Operating System :  Windows 2003 - amd64 - 5.2
    Error Message :
    ERROR: Specify a value for variable Select Target Currency
    ERROR: Specify a value for variable Select Target Currency
    Root Cause :
    The initial exception that caused the request to fail was:
    com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:932)
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:109)
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1462)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:516)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:198)
    please let me know if any of you guys had this kind of problem.

    SLD is not down its in active , I checked SLD url and Technical system also
    Its in active , but when the problem is happend they done restart 
    but many times its happening every time restart is not preferrable ,upto that one is production system.
    SLD is in active , but why the JCO'S ARE DISABLE under content Admin
    where we can search the SLD user , we checked in SU01 but the user didn't exist there
    If user is lock in the sense after the restart again it's working fine
        I want to know the Root cause , why bcz it's simultaniously happend.
    Regards,
    SONY

  • Different Web Template selection based on query selection values entered

    Dear Experts,
    We have a very unique requirement in our BI7 system.
    There is a web report which comprises of multiple queries and query views embedded in web templates. There are 2 selection parameters F1 and F2 that appear on executing the report.
    Our requirement is to display a unique web template to the user based upon his selections. If user enters values for both the fields F1 and F2 then we want to display report output from query views in web template T1.
    If user enters value for only field F1 and keeps F2 value blank, then we want to display report output from query views in web template T2.
    The problem we are facing is to decide the appropriate place where this type of condition could be coded. We do not think user exit would do the job here.
    Please help if you can.
    Regards
    XX

    Hi Pravin,
    Thanks for the reply.
    Let me please clarify my problem further.
    Web Template T1 --> Query Views V1, V2, V3.
    (All query views V1, V2, V3 have variables on fields F1 and F2).
    Web Template T2 --> Same Query Views V1, V2, V3.
    (All query views V1, V2, V3 have variables on fields F1 and F2 but this time variables would be having different values than above).
    If user enters values for both fields F1 and F2, then we want to display Template T1 with F1 variable = "value by user" and F2 variable = "value by user".
    If user enters value for only field F1, then we want to display Template T2 with F1 variable = "value by user" and F2 variable = "all values for which transaction data exist".
    Thus, we want to display a unique web template based on whether the value of F2 is entered by user or not.
    Please let me know if you need any further clarification.
    Thanks

  • Precalculated Web Template

    Hi,
    I'm working with Reporting Agent, because I need Precalculated Web Templates in my portal.
    I need to access, not only, the last precalculated Web Template (i.e. this month), but also the others (previous months)!
    How can I view previous precalculated web template?
    Could anyone help me?!
    Thanks in Advanced
    Fede

    Isn't there anyone with the same problem?!?
    In my portal, I need a list of link for each precalculated web template...
    Thanks in Advanced
    Fede

  • Web template not refreshing

    Hi gurus,
    Am using a saved view for a web template. In the view the values are displayed correctly when it comes to portal its showing as 7 days back values. can we read definition of the saved view. how can i refresh the  web template plz help on this
    Regards,
    Prasad Ch

    Hello
    We are looking at doing the same thing (iviews in Sharepoint)
    Any luck in solving the problem ?
    thank you
    Robin

  • Web Template Issue

    Hello
    I am getting a very weird error in one of my web templates when running it on portal. I have a report which has a dropdown box and in which you can view data in perid view or analysis view etc. Now when i run the report it opens in period view.the data is displayed. now if i select another view from the drop down box for eg..analysis view and then after seeing the data come back to period view my report is givng me this error.
    The initial exception that caused the request to fail was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    Please can someone assist if know of this error

    Do you already have a solution for this issue.
    I am facing the same problem.
    Regards,
    Jos.

  • Web Template with Query Views not showing Variable Screen

    Hi, I have a Web Template using 3 Query Views based on a single query.  The Query has 2 mandatory variables (CALMONTH and VERSION).  When I execute the Web Template it does not prompt with the Variable Screen, and presents the report with the Variables that were in place when the view was saved/created.  I'd like the Variables to appear.
    1. Is this the correct behavior? 
    2. Is there any documentation that might describe this behavior.
    3. Should I just copy the query and create 3 queries instead?
    Note: I did a search in SDN and found lots of similar threads, but nothing exact.  Also, I know about forcing the variable screen, but I thought I shouldn't have to do this.
    Thanks!

    k forget the view, when you run the main query... do you get a pop up for variable screen,. yes or no?
    if you dont then try to run another query and see if you get the variable screen as well. if you dont then its a bug. if you do then something is wrong in your query and its having an issue, but if you do get the screen on your query then it is a setting in your web template not in your query.
    you can also try to run the query in RSRT backend ...

Maybe you are looking for