View Layouts and Unavailable Windows

I work in a college and have several users using the same Final Cut workstations. I came in this morning to find out the timeline, canvas and other windows will not open. I went to the menu bar and noticed both of those windows are shaded gray like they are unavailable. Any idea how to make them re-appear? Please and thanks
appreciated
Mike

I tried pressing control U, but it just put the Viewer slug and the Browser next to each other in the top left of one of my monitors. If I go to the window menu, the timeline and Canvas are still unavailable.
What do I search in the help menu, If you don't mind me asking. It might have been a good idea to save a default layout for my own good.
thanks

Similar Messages

I am working in Pages and am trying to have the same footer on every page ?I went into View/Layout and typed in footer text in the space but it only appears on first page and not any subsequent pages? Thank you.

I am working in Pages on a report and trying to have the same footer on each page. I went to View/Layout, followed instructions, but the footer text only appears on the first page and not any subsequent pages? What should I do differently please? Thank you., Elisabeth

Help is in the Pages forum.

Restore Last View Settings and Max Window

When I check "Restore last view settings when reopening documents", and if the window was maximized before it was last closed, the window will start at a place slightly below the top bar (where you see "file", "edit" etc.), leaving a gap between the top bar and the window.
However, if I turn on Dock hiding, this problem goes away. But I do not want to turn on Dock hiding.
Are there any way I can solve this problem? Thank you!
(I hope I am posting my question in the right place.)

I am using Mac 10.9, by the way.

Bug: syntax error in code editor breaks layout and redrawing windows incorrect

I'm working with "SQL Developer" version:
Oracle IDE    4.0.0.13.80
Plataforma Java(TM)    1.7.0_45
installed on windows 7 64 bits.
when I execute some ddl command in the code editor with syntax error, all layout windows are incorrectly drawn, and I have to close "SQL Developer" application to go on.
Example:
   COMMENT ON COLUMN "TABLE"."COLUMN1" IS 'comments on column 1';
   COMMENT ON COLUMN "TABLE"."COLUMN2" AS 'comments on column 2';
First comment is correctly aplied but second comment has a syntax error (AS is wrong) but you no receive error output, layout it hangs.
I tested with thick/OCI and using jdbc, and I always go to the same problem.

Good Morning
Did you ever get this working without restoring ?
Kind Regards
Marius

Viewing Layouts on Remote/Testing Server

This is a beginner question.
I'm trying to view Layouts and/or Content Holders on the Remote/Testing Server out of Dreamweaver so I can edit them independently, but I just get 404 messages.
When I create a new page in BC, I am prompted for a Page Title which subsequently creates a Page URL and File name. The Page URL by default has no extension. The File Name has an extension.
If I view that new page on the Remote Server I get a 404 message. If I edit the Page URL to include the File Name extension, I have no problem on the Remote Server.
Now for example: In File Manager I have the following directory structures:
http://www.MySite.com/_System/ContentHolders/layout.html
http://www.MySite.com/Layouts/SystemMessages/SecureZoneAccessDenied-CA.html
Why is it that I can't view these pages on the Remote Server?
Is BC creating a default URL for these Layout pages that isn't the same as the file name it gives them? or no URL at all?
Thanks,
Cam

Hey there. Those are not pages. They are system generated layouts and for content holders only render when the module issued for that content holderin a pager template.
Ile extensionsyouseefor these are needed to work via FTP and understnd HTML formatting etc.
Zone access denied is a system message and will render when you create a login and enter a incorrect password.
Actual pages do not need agile extension.
Loin into the admins floor around. Look and pages, system layouts and templates, apply templates to pages. get a feel of things there as well to help get abetted understanding.
Also check out the links from the main page oftheseforums to theknowledgebaseto read through things as you need them.

Opening a view from another view of the same window in diff Browser.

Hi Experts,
My requirement is to open a view (say view 2) from another view (say view 1) with click of a button in a different browser, both the views are embedded into the same window, and also i have to pass some data from view1 to view2, based no the input data, i am displaying some information. Also both views belog to the same component.
Some pointers on this would be of great help.
Regards,
Ashish.

You would need to open another window.
See if_wd_window and if_wd_window_manager.
Call the GET_API to get a handle to window manager.
The new window can show V2.
The original Window with 2 views,
must fire plug to navigate v2 to empty view to hide it from Window1.
The to Views talk to one another via WDC Controller.
View 2 calls WDC controller methods. The WDC controller the fires Event.
View 1 can listen to this event with a method of type event handler.
View 1 can for example react to button on View 2 and close WINDOW 2.
Good luck
Phil.

I just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial

just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial. Basically nothing saves and it was all screwed up when I first got it.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

I want to get and set windows system time through lab view

Hi
I want to get and set windows system time with the help of lab view 8.5.
please help me out.
ekanth

You can use the call library function node. Once you drop it on your block diagram double click it and you will be able to select the dllyou want to use. Choose kernel32.dll and you will see methods listed called getsystemtime and setsystemtime. Use those
CLA, LabVIEW Versions 2010-2013

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

My Biggest Complaint is the Combined Viewer and Events Window

I, like most editors, work on two monitors. Personally with FCP 7 I keep my Bins and my Favorite Effects on my second monitor and have my viewer and my Canvas and timeline in the main window.
Now if I want to make my Events (formerly Bin) usable I would put them on the second monitor, but then the Viewer and where I have to scrub is moved to the second display, and that is really inconvenient as compared to have the Viewer and Canvas window next to each other on the same screen. Why would I want to scroll on a second display and watch so far away.
This drives me crazy!

Rosco188 wrote:
fcpx advocates call this dinosaur whining.
And I call this not usefull at all.
This is something that actually makes a function much harder to use, so is a legitimate complaint.

FCP 7, viewer and canvas window is dark in lion

How to fix this problem???

The image in the Viewer and Canvas windows are 1 to 2 apperture too dark. When I convert a timeline to .mov file into Compressor or Quicktime converter, has the picture (movie) the right exposure ...
hope my English is understandable...

FCPX. Viewing timecode and scrolling in the viewer window on a second monitor?

I am an old FCP7 user, learning FCPX. In 7, I liked being able to see timecode and scrolling in the frame of the canvas window. I would move and enlarge the canvas to fill a second monitor. I could still see the timecode and be able to scroll without having to go back and forth with the timeline on the first monitor.
I don't like that in X, the timeline is the only place that shows timecode and scrolling. So that when my viewer is in a second monitor, I have to go back and forth with the first monitor to view timecode and scroll. I put my script (word doc) on my first monitor which covers the FCP timeline. And makes it very cumbersome to view the script, view the movie in a large format and scroll/ get my orientation in the movie I am editing.
In FCPX, is it possible to view timecode and scrolling in the viewer window on a second monitor?

I don't use dual monitors, so this may not help, but my 1st thought is device driver version
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

I set up a new router and the windows machines have no problem with connectivity. I go through the MacBook Pro's airport assistant and view my network and then enter the WPA2 password. I get back a message saying the password is incorrect when it is

I set up a new router and the windows machines connect fine. My MacBook Pro does not. I go through the airport assistant and see the network yet when I enter the router WPA password I get a message back saying that the password is incorrect. And, it isn't! Very frustrating. What can I do as I had the same problem after I tried to reinstall my last router. Again, only on the Mac. Thanks!

If you kept the same Base Station name and network name, that can confuse Keychain Access. Either change the Base Station and network name, or open Keychain Access Utility and delete any reference to your Base Station and network name. Make sure you delete from the Login and System keychains.

How to create a webdynpro view dynamically and embed into view container?

Hi all,
Anyone knows how to create a view dynamically and embed the view into an existing view container?
My layout looks like this:
I have an existing view named main_view.
Inside main_view, I create a view ui container named vcu_view.
I embed the main_view into my window.
I need the codes to create a view dynamically and embed the view into the view container. Anyone have any idea?
Thanks in advance.
Rgds,
Siong Chao

hi Siong Chao ,,
empty view insence ..( create a view without any UI element in it ) in design time ..
>
Siong Chao wrote:
> Hi Chinnaiya,
>
> How do you create an empty view dynamically then? Thanks in advance.
i think we cannot create a new view dynamically because it is a webdynpro restriction ..
NOTE: experts correct me if i am wrong in this answer
Regards
Chinnaiya P

Abap webdynpro layout and application not displayed

Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
                1) Layout of ABAP Webdynpro Component are not displayed .
                2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
      If any one have information for this kindly let me know .
Thanks :
Vishwas
Edited by: vishwassap on Aug 12, 2010 7:17 AM

Hi,
   Thanks for reply ,
   Above mention is not link ,its an error in pop up inside layout of view .
I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:31 AM

View Layouts and Unavailable Windows

Similar Messages

Maybe you are looking for