View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

Similar Messages

Strange Behaviour with JPEG files on Premiere Cs5 Timeline

Whew! Have not seen this problem before. Have been using Premiere since Ver 3.
I am in a project where I am dropping Jpeg images on the time line and creating a slideshow.
I am doing lots of motion with keyframes on scale., position etc .
When I render the project some images disappear and another image appears several times in their place.
Here is the link to the uncompleted video :
http://youtu.be/GA6iSXkFhK0
Notice the image of the bride and groom at front of the car keeps repeating itself, whereas other images were placed in the timeline.
Help would be appreciated. I have redone the project 4 times.

BTW, this issue should be fixed in Premiere Pro CS5.5. Users of Premiere Pro CS5 will need to use the workaround that Colin mentioned.

Strange behaviour with Subjective Assessments comments in SSM10 SP10

Good day community,
We have strange behaviour with Subjective Assessments comments in SSM10 SP10.
We have been using this successfully for 3 quarters.
The scenario is as follows.
Business users capture Subjective Assessment comments successfully and these can be viewed on the scorecard overview for Q3. This can be printed to PDF successfully as well.
A few hours later, when the user accesses the Scorecard Overview, the Q3(March 2014) comments are now replaced with the
Q2(Dec 2013) comments.
This has not happened previously. We have recently deployed Internet Explorer (IE) 10 to some of the machines that previously used IE9 or IE8. Could this be a contributing factor?
This has happened with one database on 2 contexts. Although the database/scorecard in question has been created on SSM10, we have recently upgraded the rest of the organisation onto SSM10 from SSM7.5 but those are completely separate databases.
We have not found a pattern yet, but there is only one assigned administrator for this database and she often has 'funny' things happen on her machine. Could it be possible that there's a virus on her machine? Or maybe there's a sequence or combination of steps that she's doing that could cause this? We have not been able to recreate the situation in our developer offices.
Any ideas on this strange behaviour would be appreciated.
Regards,
Natasha

Hi everyone,
We have since noticed that if you go into the Administrator > Context Management > and change the "Person Responsible" and then save, once you go back to the Scorecard Overview all the Q3 comments have been overwritten with the Q2 comments.
This happened on a different machine so it seems there could be a bug in the Administrator.
Any thoughts on this strange behaviour would be appreciated.
Regards,

Strange behaviour with Safari.

Very strange behaviour with Safari this morning. Pages loading piecemeal or partially. The content only becomes viewable after the cursor has passed over the area. Have cleared caches and reported it but I'm wondering if this is a local matter here in the UK. Anyone suffering similar problems? Firefox is responding perfectly normally.

I see a reply has come back via a previous post. As I am trying to get a response to this one I shan't reply there but I should point out that for me, this is an isolated problem. I do use open DNS but with no track history of problems there , I can't blame that.
In the last few minutes normality has returned.

Strange behaviour with nested overflow headers

Hi there,
I have a strange behaviour with nested overflow headers. I have a hierarchy with some dynamic tables an several headers for the hierarchy steps. When the table entries lead to an page overflow, I would assume, that all parent headers will be shown. But unfortunatley only the last (the deepest in the hierarchy) defined overflow header will be shown. Here you can see a quick example of it. (http://www.nemonon.de/HeaderProblem.xdp)
Any help would be very welcome.
Thanks and greetings,
Joerg

That will sure work for some requirements and thanks for the ideas. But this would fail for the second table. Perhaps my example xdp only shows the behaviour of the nested overflow headers and it´s structure is reduced to show that. The real situation is a bit different. The parent containers also contain some other content. The Problem is not the table...I've just chosen it to produce some content and another nested header. Just try to uncheck the overflow header of the table. This will lead to, that the next defined header (in this case "HeaderThree" is shown. When you go on by also disabling that header, the next one will be shown...and so on. This shows, that the headers for their own are functional, but they fail in combination.
Greetings,
Joerg

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

Can you actually see that the attachment has a .jpg extension? Some mail systems strip it off (I've seen AOL do that) which makes the attachment difficult to open.

I seem to be having trouble "save" or "save as" with jpg files. Any Suggestions?

I seem to be having trouble "save" or "save as" with jpg files. Any Suggestions?

By the way, a full uninstallation and reinstallation is a bit heavy-handed and is not always necessary.
Keep in mind that with Photoshop CS6 the Plug-ins subfolder is now normally completely empty. So to undo an inappropriate copy of plug-ins generally you can just delete all the copied plug-ins and that will restore proper Photoshop CS6 operation.
Then you can reinstall your needed 3rd party plug-ins one by one.
-Noel

I seem to be having trouble "save" or "save as" with jpg files.

I seem to be having trouble "save" or "save as" with jpg files. Any suggestios?

Awol2010 wrote:
Any suggestions?
Yes. - clarify what trouble(s) you are having.

Strange stack behaviour with referenced files

I have just started to notice peculiar behaviour with referenced images within stacks. I have been reviewing last years pictures with a view to clearing out the junk.What I have found is rather alarming in that on clicking a stack to open it all the images within the stack were the wrong pictures, wrong as in taken with a different camera in a different year.The top picture does not seem to be affected.On attempting to find the correct files using 'manage referenced files' all the wrong images are shown as found in the list view with their own file names at the same time the thumbnails (top right hand pane) show the original correct file names but with the wrong thumbnails,Aperture does not realise that it is referencing the wrong files and so will not let me reconnect to the correct files.
Anyone with a similar problem or a cure for this behaviour?

Ok I have deleted and rebuilt thumbnails files to no avail.
What appears to be happening is that aperture is using the wrong file-path for the affected pictures.
I keep all pictures arranged by date order so for example where the correct file path for an image would be;
Raid Zero/Pictures/2006/0609/060928/pict3722
Aperture is giving a file path of
Picture Library/2007/0712/071223/_DCS1023
in the manage referenced files pane it shows the wrong path as above, the thumbnail picture is of the wrong file but the thumbnail name and date is correct.
Interestingly since rebuilding the thumbs it is now possible to reconnect to the correct original file whereas before the reconnect option was not available, however it is only possible to do this one file at a time,the re-connect all function does not work presumably because Aperture is not aware that its filepath is wrong.
Oh dear.... Aperture has just crashed,this immediately after reconnecting 6 files and waiting for the files to update to the correct image in viewer mode.
GRRRRRRRRR!

Cannot view jpg files in full page mode. Contents of jpg files are enlarged so that it requires 4 pages to print one page.

When people send me jpg files that contain a page of information, I cannot view the file in full page mode. I can only view 1 quadrant of the page at a time. If I print the jpg file, it uses 4 pieces of paper (1 quadrant per page). Others who receive this file can view it fine.
== This happened ==
Every time Firefox opened
== It has always worked this way.

There is an option for the Initial View that is "Magnification:" "Fit Page". And this works for the initial page when the PDF is opened and it does not matter what the page size it, Acrobat/Reader will automatically fill the screen with the page. If you want the zoom type to change with each page then you need add a page open script to each page to set the pages zoom type to "zoomtype.fitP"
this.zoomType = zoomtype.fitP;

Strange DW Behaviour with local file includes

Can anyone please help?!?
I've been using DW for many years, and we've just moved over
local files to a new server. Unfortunately, during this copy, some
of the files have started behaving very strangely...the virtual
includes are no longer showing in the WSIWIG display. There's
nothing wrong with the files - if I upload them to the web server,
they work.
Here's the example:
1) I set up a new web site in DW. I don't specify a remote
site at this stage.
2) I copy in 2 of the "problem files" into the local
directory, page1.asp and includefile.asp
3) Page1.asp looks like this:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
</body>
</html>
This page does not display the includefile in the design view
as it should.
If I go to "new web page" and copy and paste the exact code
into the new page, it works fine and displays the include file.
Both files are in the same directory.
If I strip both newpage.asp and page1.asp down to just
"", one works and
one doesn't!!
This led me to believe it was some sort of permissions
problem from transferring the files and folders around, but if you
look at newpage.asp and page1.asp, they have exactly the same
permissions.
It's driving me mad - we have a load of web sites behaving
like this, so I can't just create a new page for every page and
copy in the code!
Is there some strange hidden permissions I'm not aware of?
Thanks!!!

You can report this to Apple here:
http://www.apple.com/feedback/macosx.html

Bridge,( Installed, Default .jpg viewer), doesn't open by default jpg files.

I have Adobe Bridge installed and set as my default image viewer including .jpg's. It appears in programs list and as default image browser. I have some jpegs, however that a friend sent me that won't launch Bridge when selected. Their extensions are DSC###.jpg.
When selected, Windows viewer is launched. When file association is promted, Bridge does not appear in the program list, even when a deeper search in the Adobe file is performed. The images appear and open properly IN Bridge, but not by default when their file is selected outside of Bridge. Bridge appears in file association for other .jpgs. There doesn't seem to be a file extension DSC listed ( I didn't think it would be).
What Gives? (Win7 ultimate, Adobe CS5)
TY in advance!

Perhaps it is a matter of semantics. Bridge is not a separate program, so it will not be listed as the default program to open image but listed as CS5 (don't have any of those programs on this laptop, and out of town). It is strictly a browser so technically the images do not open within it. You can view the image but to open it it will be in the parent program Photoshop or one of the other in a suite.
Adobe is quite particular on images. Some images just will not open in PS. Then the best bet is to open in a program like Infanview and then use "save as" to save without imperfections.
Quicktime is the default program to open many files in Bridge, and is necessary with certain file formats.
If I am not getting to the heart of your issue I don't mean to dance around it, just not fully comprehend it.

IPhoto: strange behaviour with preview thumbnails

Is there a simple way in iPhoto 8 to rebuild the thumbnail database?
I recently noticed a strange behaviour iPhoto 8 has with previews: In some of my event categories, iPhoto does not display the correct preview thumbnail of the picture, but a preview thumbnail of another event. When I click on the thumbnail, it reloads the appropriate preview and it does not happen again - with that picture. Also, if I double click an event to open it, the small thumbnail of the event's key photo that is to be displayed in the title bar (next to the All Events button) is not always correct.
Thank you for your help!
Stefan

I have similar problems (lately) with iPhoto 6.0.6 -- thumbnails do not equal the images they 'thumbnail' of.
Sometimes when it opens, it (recently) asked me to rebuild the thumbnails, but not always.
Can I force a thumbnail rebuild using the command you gave - Apple-option while opening iPhoto? In iPhoto 6.0.6 this primarily forces a new selection of a library.

Strange behaviour with Slideshow placement since upgrade to 3.2 from 3.1

Hello, since I upgrade from 3.1 to 3.2, I have some strange behaviours but in particular with the placement of a slideshow on a new page. It is not displaying in the same position as I have in in Design. It is way off and going up over my menus when I look at it in Safari or Chrome. Does anyone know how to fix this or could it be a bug?

Ben,
When you upgrade, only apex_030200 will be created and that will use the tablespace you specify. It does not have to be the same one used by flows_030100.
Scott

Strange behaviour with smart music list in iTunes

I don't know how is the name of this list in english. In portuguese iTunes calls "Lista Inteligente". So, I eddited a list to show all musics never played up to 100 months ago. If I click on a music in this list, before it plays, the music disappear from the list as it would be played and nothing will be played. And so one, the next and etc. No date is shown in "last play" but the music isn't anymore to see in this List.
This list works well for many years but suddenly I have this strange behaviour.
could it be something wrong with new update? Now I have iTunes installed 11.3.0.54

Click the gray disclosure triangle in front of the iPod touch name.
Thus I cannot do any functions with the music on my iPod - such as delete songs, update song info, etc.
I would suggest making any changes to songs in iTunes and then transferring the songs to the touch.
You can create playlists and autosync on lythos playlists.
Then add/delete from those playlists, update items in iTunes then plug in the touch to sync it.

View Master mode strange behaviour with jpg files

Similar Messages

Maybe you are looking for