View mismatch in SQVI tcode in User level

Hi,
I have copied an user A from user B.
Everything is same i.e. role,profile,parameter.
Problem is that B is able to execute and see the reults of tcode SQVI in the initial screen
But user A is not only for that tcode.
Any idea?
Regards,
Mofizur

How to see that?
How can u assign this to another user?
Regards,
Mofizur
Edited by: Mofizur Rahman on Jan 16, 2008 1:23 PM

Similar Messages

Tcode to view the list of all dialog users in SAP XI

Dear all,
What is the Tcode to view the list of all dialog user is SAP XI system.
I checked with SU01, it doesn't have a option to display the list of existing users.
Any other Tcode for this purpose.
Regards,
Younus

Hi..
T-code AL08 -> list all logged users(user login logon)
Regards..
krishna..

Risk Analysis at user level shows nothing in all 3 views though at role level shows risks of global rule set

I am configuring ARA 10.1 for a ECC 6.0 plug in development system and facing this issue. Risk Analysis at user level shows no data in all 3 views though at role level shows risks of global rule set. I am using Global rule set. I generated all risks/functions & using connector group as SAP_ECCS_LG not SAP_R3_LG.I activated common, R/3 & ECCS BC sets. Added integration scenario for AUTH. Run all 4 sync jobs multiple times successfully. My system already has decentralised EAM 10.1 implemented & even used in production as BAU. I have checked at both chrome & IE. The misleading thing is that RFC is also working fine & I can see risks in Risk Analysis at role level & risky roles are even assigned to valid users.GRC is at SP4 & accordingly is the ECC 6.0 plug in. Thanks in Advance. Please consider it urgent.

Hi,
Assign ECC connector to SAP_ECCS_LG group.
Run the programs GRAC_PFCG_AUTHORIZATION_SYNCand GRAC_REPOSITORY_OBJECT_SYNC) in full synch mode(this might take time so better do this in background). Better do it sequentially.Check the logs of the jobs in SLG1 just to ensure everythings fine.
Run ARA for a specific user and mention the connector for faster output. Ensure this user has the role with risks.Also as explained earlier check the GUID against user id in table GRACUSERROLE and using GRACROLE you can find out the technical name of the role updated in the table. This should be same as the backend role.
Then run ARA and while doing so please ensure the selection screen doesnt have any unwanted default inputs. If followed correctly , this should be of help. I am assuming the role analysis yielded correct risks as configured since this would mean that connector have correct actions and basic config is in place.
Regards,
Vivek

Can PID (Parameter ID) be set as a default by TCODE or Role Level

Hi, Any one has any idea if PID (Parameter ID) and its value can be set as a default at TCODE or at Role Level?
Thanks in advance.
Syd.
Addendum:
Re: Can PID (Parameter ID) be set as a default by TCODE or Role Level
Posted: Oct 17, 2006 9:38 AM Reply E-mail this post
Thanks for the reply, you have mentioned try creating a Transaction variant or a Transaction parameter.
Here is my question?
1. Can we set a default Parameter ID at TCODE level so, if any user execute a transaction who has access to execute it, he will have Parameter id and its value as a default?
2. Can PID be set as a default for SAP TCODE or Custom TCODE, or can be done for both, if it can be done then, How?
3. Can PID be set as a default for a particular Role or profile?
Message was edited by: Syed Alam
Message was edited by: Syed Alam

Hi JC,
Yes, I agree.
A small disclaimer however is that we dont know which transaction is being refered to.
Creating a transaction variant with the parameter set for it could enable the use to navigate further and back again and in doing so "shed" the screen which the transaction (initially with variant parameter and skip screen) originally gave them.
Using a user-exit to set the parameter can in some cases be closer to the functionality (irrespective of how the user gets there) and be more reliable. But in this case an adventurous user will be likely to trick it anyway if they want to.
If the decision is made to use PIDs in the coding, then it is a decision that the user can influence the value (in my view). If coding makes insecure use of PIDs, then it is a design error in the coding.
Cheers,
Julius

What is Execution Count in User Level Analysis?

Hi,
Can anyone through a light on that what is Execution Count Column means in User Level Analysis Report ,If it is the number of counts of the users execte the action then how we can discover or from when it counts the number of count ....??
is it count from the starting of the user using that tcode or action?

Hi Pranjal,
Yes, Prashant is correct it counts from the first job run, but as it takes data from STAD, so the counting is actually as per the STAD data store setting.
So if STAD store data for 4 days and if you run job in today it will count from 17.05.2014, make sure you have this job running regularly, if you miss this job run for more days than the retention period of STAD data, you may miss execution count for those days.
Hope this clears your query.
BR,
Mangesh

Can we create wallet at User Level to implement TDE in Oracle 10g

Hi
I am going to use a Oracle 10g TDE security feature for data security.I have gone through with lots document.Everywhere there is mention to open or close a Wallet at system level.I mean ALTER SYSTEM..that means except DBA no one can see the encrypted column.
But my requirement is bit different,I want to encrypt the column based on user.
lets take example- Suppose we have one table TEST with C1,C2,C3,C4,C5,C6 column and there is U1,U2,U3 user.I want to encrypt C1 and C3 for U1 , C2 and C5 for U2 , C4 and C6 for U3 and U1,U2 and U3 can see only all columns except encrypted column.
My question is Can we apply TDE at User level rather than system level.
Any ideas or thought would be appreciable.
Thanks in advance.
ANwar

The idea of TDE is to provide data protection on storage media, so when your backup tapes drop from the truck or the hard disk of a stolen laptop is sold online, encrypted data remains encrypted and can't be read by anyone.
It seems to me as if you try to achieve access control by encryption, which you don't need: If users have sufficient privileges or the business need to see data, then they should be granted access and see the data de-crypted. Otherwise, access control mechanisms (roles, views, VPD, OLS) should kick in and hide the rows from them.
So, for day-to-day business of your database, the wallet needs to be open, so that the database can de-crypt data for users who have been granted to see credit card numbers etc., but then limit access to credit card numbers they are not allowed to see with other measures. There is a little hands-on for TDE and VPD here:
http://www.oracle.com/technology/obe/10gr2_db_vmware/security/tde/tde.htm
Hope this helps,
Peter

Converting user level personalizations to site level personalizations

Hi All,
My Requirement is as follows:
In one search page i have created one view to save my search by providing view name.
Now if i login from different user i am not able to see that view name in the drop down which i have created from different login.
i intend to see that view for all users even if create from single login.
i know that save search is user level personalization, but i want to get the same at site level.
but while creating there is option like site level or responsibility level.
Any help would be greatly appreciated.
Thanks in Advance.
Regards,
Naren.

Hi Reetesh,
find the below steps.
let me know if you need any clarity.
Create, Duplicate, Update or Delete an "admin-seeded user-level" personalization :-
==================================================
Select the Personalize pen icon to launch a focused version of the Page Hierarchy Personalization page for a selected boxed region.
Use the Hierarchy Page HGrid to identify the query region for which you wish to create an "admin-seeded user-level" personalization. (You can create seeded user-level personalizations only for a table or a HGrid in a query region.)
Select the Seeded User Views icon to launch the Personalize Views page where you can create, update, duplicate or delete "Admin-seeded user level" personalizations.
When you create, duplicate or update a seeded view, you navigate to the respective Create/Duplicate/Update Views page. Select Apply to save your changes when you are done.
Regards,
Naren.

User Level SOD Report - Batch

Hi GRC Experts,
Every day my company runs a User Level SOD analysis against every user in ERP or HRP. Here is the criteria for ERP (there is a connector):
System: Our defined ERP connector
Risk Level: All
Rule Set: Global
User is not DDIC
User Type: Dialog
Format: Detail Technival View
Access Risk Analysis at the Permission Level
Show All Object
This job is run in Background, and the report output is downloaded from Background Jobs.
Is there a way to schedule this job using SE38 and a variant? We would like to start using a automated scheduling tool.
The program run is GRFN_BP_SCHEDULER with variant &0000000001569
I looked at the variant, and it looks for I_PLANID and I_UPDTSK.
Is all the criteria I selected stored in a table as a PLANID?
Thanks in advance.
Donna Wiley

Hello Plaban,
Thank you for the info! How do you set up the variant for the "Report" options? We need two reports for "User Level". In the Report Options section, we need one report with a Format = Detail and one with a Format = Management Summary. Both reports should be in the Format = Technical View.
Thank you and kind regards,
Janice

Issue with Total Number of SODs at user level.

Friends,
Quick question -
We are using GRC 5.3 Production on NT 20003 server. and back end systems are ECC 6.0
1.We added the Additional Role to one of the business users in ECC 6.0
2.We ran the FULL synch after adding this role in backend.
Issue : The total number of SODs did not change for users, even though the SODs for this business users did increase about 300.
Locations of Screen
Informer Tab ->> Risk Violoations.
Analysis Type -> Users
Does anyone has any idea how this numbers get interpreted?
The Total number of Violations for permission should increase, if user level SOD gets increased, as per our understanding.
PT

It should be in below sequence -
1. Full or incremental sync for user/role/profile
2. Full or incremental batch risk analysis for role/user/profile
3. Management report
The view you see is management report, which is based upon above jobs. FIrst jobs does high level sync like user/role/profile addition/deletion etc. Second job actually does risk analysis. Third one fills up the management view. If your batch risk analysis was run on Aug 30 aug 10 and management report after completion of the same, the report will show the same data till you run these jobs again even there are many changes in backend authorization.
Hope it clarifies your query.
Regards,
Sabita

Remove Personalization at User Level - Saved Searches

All,
There is a problem in the Saved Searches. We are on 11.5.10. The page immeditely throws error when a custom view is created using "Save Search" button.
It says,
## Detail 0 ##
java.lang.NullPointerException
at oracle.apps.fnd.framework.webui.OADataBoundValueCustomization.getValue (OADataBoundValueCustomization.java:191)
I am not able to revert this view created through save search. I tried by setting the Disable Self-Service Personal to Yes at that user level where i created the view and bounced apache. But the error still exists.
Is there any means like by "Functional Administrator" responsibility where these views can be removed?
Thanks,
Padmaja

Pl see if a similar issue reported in MOS Doc 859190.1 (Personal Worklist Returns NullPointerException When 'Disable Self - Service Personal' Is Set To Yes) can help
HTH
Srini

Profile options at USER level in EBS r12

Hi Gurus
I'm an new to Oracle EBS can some one help with this,
1. Turn on debugging using the following profile options at USER level :
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
2. Run the Create Accounting Program
3. Derive debug message using the following query and upload in excel format :
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
4. Upload the LOG and OUTPUT files for the :
- Create Accounting
- Accounting Program
Will be waiting for you reply.
Best Regards
Babu.

Hi Babu,
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
- Navigate to sysadmin responsibility > profile > system
- Find for the respective profiles eg: FND: Debug Log Enabled
- Set your desired value.
2. Run the Create Accounting Program
Run the create accounting conncurrnet program View > Request > New from the respective module
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
Run this query from backend, and provide the Concurrent ID of the Create accounting program (replace this at <’Accounting program ‘ request ID>)
- Create Accounting
- Accounting Program
Upload the the logfile and output files of the respective program and the output of the above query.
I believe this is an action plan from the SR, you may also get the assistance from the SR itself and they will help you. Anyways let us know if you need any assistance
Thanks &
Best Regards

Limitations at user level

Hi experts,
I want to know if is possible to limit the use of memory, buffers,...at user level (no at instance level)
Does someone tell me how can I do it, please?
Thanks in advance.
Message was edited by:
Eshmarc

Hi Marc
From a security point of view the answer is No, if it's possible on another level ? - I doubt it, but try to ask in the NetWeaver AS, General Forum instead
Regards
Morten Nielsen

Profile chance at user level

hi,
two things i wanted to know.
(1) Can i change site name at user level ? (i tried updatable for user th' Application Developer responsibility)
(2) The default color for query mode is Yellow. I want to change it to blue. Is this possible ?
TIA
dbaapps.

Hi Babu,
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
- Navigate to sysadmin responsibility > profile > system
- Find for the respective profiles eg: FND: Debug Log Enabled
- Set your desired value.
2. Run the Create Accounting Program
Run the create accounting conncurrnet program View > Request > New from the respective module
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
Run this query from backend, and provide the Concurrent ID of the Create accounting program (replace this at <’Accounting program ‘ request ID>)
- Create Accounting
- Accounting Program
Upload the the logfile and output files of the respective program and the output of the above query.
I believe this is an action plan from the SR, you may also get the assistance from the SR itself and they will help you. Anyways let us know if you need any assistance
Thanks &
Best Regards

AC 10.1 Empty screen on User Level analysis

Hi all,
We have migrated our 5.3 Access Control System to 10.1 and all the post-installation steps are applied. We loaded the user and roles from our ERP System, created rules and generated them for our system. Parameter 1027 – Enable offline risk analysi is set to YES. We also ran the batch job for the risk analysis in Background (transaction GRAC_BATCH_RA). When we run the NWBC -> Access Management -> User Level for our System we get just an empty window – no error message, nothing. It doesn’t make a difference if we run it on action level, permission level with offline data or without, in foreground or background, the result is just an empty window. What might be the issue here ?
Thanks in advance
Bernd

Hello Bernd,
In GRC 10.1 there are a few new things. Can you tell which view you are running the report on? There are three in GRC 10.1; namely - Remediation view, Business View and Technical View. See screen below.
Most problems are on Remediation View (which is selected by default when you start running the RA). For traditional risk analysis report please run on the "Technical View" and see if you get results.
To fix the issue with the remediation view's blank screen please review following notes:
2040204 - Remediation View does not show up while running risk analysis
2035538 - Remediation view in Risk Analysis does not show any data
2099999 - Remediation View screen shows blank while Risk Analysis
Thanks
Sammukh

Changing The Validity Dates In Org Model in CRM- User Level

Hi
How can we restrict the Validity Dates in Organisation Structure at User Level.
I need that the user should be given some specific dates<b> ( Valid till or assigned till )</b> while assigning in the org. And it should be visible always in the Org Model.
We tried using Delimited Date Function, but the User gets ellapsed if the Validity is expired.With the business point of view, <b>the requirement is that all user should be listed in Org model with respect to any dates.this would mean that if a user is terminated we would want to change the Valid till date in the Org</b>

Hi Amrita,
Business partner number and Object ID is automatically determines by system when creating a org unit.
I dont find any configuration to create org unit with your own BP number and object ID. You have option to make repairs to the existing org unit.
Please find the below path to repair the org unit
IMG -> CRM -> Master Data -> Business partner -> Integration Business partner -Org management -> Create Business partner initially
Select the org unit and execute to get all the org units.
You can select the org units with errors /warnings and click on start repair to get automatic assignment of BP.
Hope it helps
Reward points if it helps
Regards,
Madhu

View mismatch in SQVI tcode in User level

Similar Messages

Maybe you are looking for