View my saprouter config from SAP support web portal ?
Hello,
We're planning to change our saprouter IP address, and I just thinking - is it possible to view current registered saprouter config (IP address and etc) using SAP support web portal ? I mean to view it changes after SAP receives saprouter network config change message.
Or it's just secure info not available on SAP support portal ?
thanks
Vilius
If you go to the SAP Support Portal -> Data Administration and edit any of the system you'll be able to see and choose between the registered SAP Routers and it will show the IP Address and other details
Regards
Juan
Similar Messages
-
Config view for VLAN config is not supported
Hi folks,
I have the following error when I try to view the VLAN config from RME->ConfigManagement->Version Tree.
"Config view for VLAN config is not supported"
I didn't found any information over the RME and Campus documentation.
Anybody know what kind of error I'm issuing
Thanks and Regards.
LeonardoHi Pablo,
The VLAN.dat file cannot be used to be deployed via CiscoWorks, but it can be done manually:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1311740
The problem with viewing the VLAN.dat contents in the config viewer or change audit reports is also mentioned in the link below:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/chgaud.html#wp1060886
Look for the "Details" row and there you will see the following:
VLAN configurations cannot be compared because they are in binary format. In this case, the Details link will not be available and will be shown as NA.
Hope this helps! -
How to send a XML file from SAP to WEB SERVICE
Hi folks,
i m creating a XML file with purchase order data, while saving the purchase order.now i need to send this XML file to some WEB SERVICE i.e to some perticular address in WEB.
can anyone give the step by step procedure to do this web service configuration? it's really urgent.
points must be awarded.
Thanks & Regards
pabitraHi all,
i need to send some purchase order data from SAP to WEB SERVICE. while saving the purchase order, i want to send some data from SAP to WEB SERVICE ( a perticular address in WEB).
i want to see those datas in xml format in WEB.
Now i am using SAP 4.7 version. Is this web service configuration is possible or not?
In SE37, i can not see the CREATE WEB SERVICE option in utilitities--> More utilities menu.is it possible in 4.7???
can anyone give any suggestion ? it's very urgent.
Thnaks
pabitra -
Log off pop when navigating from SAP CRM Web IC to Utilities transactions
Hi Experts,
I have created about 100 transaction launchers for ISU transactions, which are linked to the navigation bar in the Web IC. If I Click on this link which should open an ISU trnsaction, it doesnt open the ISU transaction. Rather it gives me a pop up as LOG OFF. The problem is most of the transactions are opening up this way, but there are only a few that doesnt open up and gives a log off error.
The client mapping of CRM system and Utility system has been done.Hi Friends,
I have configured a transaction launcher for ISU transaction code EL27 and EL29,
I am facing the simular issue, when try to access these transaction from ICWC i face the same problem. Logged off successfully screen appears.
Please let me know if you resolved this error.
Thank you. -
Cannot download from Xcelsius support web page
I use IE8 and I get a "broken" download page such that the search leads to a list of files that extend beyond the right side of the browser and I cannot select a download link.
Any suggestions - alternative download sites?
ThanksI have no idea when this will be fixed but I noticed that the page above (which you get to if you go in via service marketplace) has a note about recommended browsers (not IE8).
The page is titled: Downloads for Crystal Reports and Xcelsius and here in the link:
[SAP Crystal Solutions Downloads|SAP Crystal Solutions Downloads]
Regards
Matt -
How do I download Business Objects 3.1 software from SAP support site
I was able to add the software I want to download basket,but when I click on any particular download,I get error message...
Hello,
as tyou are having a BOE 3.1 download issue I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk -
Hi,
With SAP pushing everyone towards HANA, does anyone know what the support strategy/timelines are that SAP has for BWA? I.e. until when will SAP support BIA?
Thanks
WernerHi Werner,
Got this info from SAP Support Portal .Looks like till 31/12/2020 SAP will support BWA.
-Arun.M.D -
JCO.Server Error while trying to execute a RFC program from SAP
Hi,
We are connecting to an external registered server program from SAP via Web Methods.
The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
Number - 10
LUname - dev01
TPName - sapgw00
User - KRAORANE
Status - CONNECTED
Symbolic - PRDB2B
Conversation - 86520353
Prot - REG
SAP return code - 0
CPIC rtn code - 0
The external program returns results as expected.
However sometimes the RFC fails and returns the message JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS.
We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
-KiranHi,
Please see the below links..
JCO.Server Error while trying to execute a RFC program from SAP
Re: JCO.Servcer could not find server function
Re: JCO.Server could not find server function 'SET_SLD_DATA'
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Re: interfacing SAP with an existing java applications
http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
http://www.sapgenie.com/faq/jco.htm
Regards
Chilla.. -
STMS - transport .SAR file downloaded from SAP notes
Hi,
I have download .SAR files from SAP Support Portal and have used SAPCAR.EXE to unpack it.
As the result, I have 2 files: K123110.L6B and R123110.L6B.
I copied these K123110.L6B to my DEV server \usr\sap\trans\cofiles
and R123110.L6B \usr\sap\trans\data
I would like to transport it from DEV server to QAS server.
So, I logon on to DEV --> STMS, I clicked on the "Transport" logo,
then double click the DEV server.
Then, at the menu bar, I goto Extras --> Other Requests --> Add and
enter Transport Request: L6BK123110
But, there is an error message:
<b>Transport control program tp ended with error code 0247
Errors: addtobuffer has problems with data- and/or cofile</b>
I guess I must miss out some steps, can anybody guide me?
I need to update the SAR file to my QAS server.
thanks in advance.
best regards,
ying yingHi,
Please send the files to ur Basis guy. they will upload it to the server.
And also read the documentation of the OSS notes there they mention it.
Thanks
Shiva -
How to tranport the users from SAP R/3 to portal ?
Hi All,
I had connected to SAP R/3 system from portal. I am trying to tranport the users from SAP development server . So that everyuser can enter through the portal only and work on SAP.
Please guide me the procudure how can i tranport the users from SAP system to portal.
Please urgent replies are appreciated .Hi Abhishek,
Thanks for your information.
please let me tell you the detailed information. My basis guy had configured the system for me as i didnt have any idea on installation procedure. So i am facing th e fallowing problems.
<b> First Problem</b>
I am not able to create the user from portal directly. Its showing the fallowing error.
<b>An error occurred in the persistence; contact your system administrator</b>.
so i had created the users in WAS by SU01.
<b>Second</b>
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
<i>If u dont mine Please provide with me the steps to fallow</i>
<b>Third</b>
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
<b>Could not able to look up the system.</b>
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent -
How to transfer role to Web Portal
Hello Friends..
Need some help.
There is some specific requeirment of my project.
We have some Bex Queries which have been assigned under one particuler role and we can execute the same from Buss explores.
Now I just want to transfer this role to enterprise portal , so i can see all the iview for all queries under the same role.
Currently we are creating all iview manually which is unlogical.
Could you please let me know how can we transfer role to Web , so we can see all iview.
I hope my question is clear to all of you. Thanks in advance.
RegardsThanks for your help.
But I m not transporting the Web tempaltes and i view any where.
I just want to chck all Iview and Webtemplates be there for all queries and reports in same server.
When i go in Portal , all iviews shld be created automatically for all reports.
For this , we need to transfer our roles from Bex to Web portal , so it automatices create all iview for all report.
But i dont have idea , how can we do this..
Please let me know if any one of you have any idea.
Regards -
Only allowed 1 simple list of web portal?
Hi all,
I have 4 simple lists as user prompts for a Service request. From the the web portal all is fine and seperate.
When i log the same request from the console the 4 list are now 1 big list.
Any way to seperate these out for the console other than creating MP lists for each?
Which would mean you can only have 1 simple list per Service request?
2012 RTM.Hi Anton,
From the request offering setup, i added 4 differnt simple lists
And from the console when i open the Service request i see all my lists with the default value for list in item 6 above, and when i try to drop down it shows everything from all 4 lists
Any thoughts or is this normal behaviour?
Thansk in advance
John -
HTTPs connection from SAP WebAS
Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer. -
How to consume a web service provided by third party system from SAP system
Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
RamHi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton -
How to change web screen for Creation of SAP Support Message.
Hi Experts
I need assistance on the following, I need to change the web screen for Creation of SAP Support Message to the user's requirements.
Technical Information About the application and component.
Application: AGS_WORK_INCIDENT_CREATE_APP
Web Dynpro Component: AGS_WORK_INCIDENT_CREATE
Window Info: MAIN
View Information: VWMAIN
Configuration ID: AGS_WORK_INCIDENT_PROCESSOR
Thanks
NelsonHi
Is there other solutions?
Thanks
Maybe you are looking for
-
Quantity Variance in Invoice Verification
Dear All I have a requirement where the system should display error in Invoice Verification if the quantity exceeds Goods Receipt quantity however there should be seperate treatment. ie.If the quantity variance upto 5 percent is allowed for raw mater
-
Regarding content conversion parameter
Hi I am doing content conversion in sender file adapter.I want to remove " " in target file. I used row.enclosureSignEsc "" but its not working. can any one tell me how to use enclosure sign parameter. Source Flat file looks like: "A00",417,"SC9",20
-
Mac App Store problem - I have an update for an app that do not exist in my Mac
Hi, I have an update for an app that I never didn't bought before in my Mac App Store. Thats happen before more than a year, I tried everything including updating the app (got an error) and format the Mac but the update for this app didn't remove. th
-
Can I use Win Xp setup apllication, found in "I386" folder?
Is it all possible, to reinstall win xp using the setup file found in the I386 file on my harddrive, it asks for a cab1 file, but I can only assume it has only been extracted as there are a load of files with the last letter of their file name replac
-
I have attempted to restore and import the former bookmarks, but I do not know where to look for the files. On a windows XP service pack 2 desktop computer, I upgraded from 3.6 to 15 last night and all bookmarks are gone. Please help me find where to