View next received email when I click back into a folder
Hello
Does anyone know how to view the next new email without having to actually click into it?
I have rules sent to place emails in folders when I receive a new emails.
I used to be able to click that folder and it would highlight the most recent email and I could read it with the preview pane and then click to another folder and that email would be marked as read.
It only does this for the first mail of the day when I click back into the folder it shows me the first email received that day and not the most recent which obviously is the one I am interested in.
Does anyone know of a fix for this please. I cannot seem to find an answer in the forums all they seem to do is highlight other issues I have to look forward to, I have checked my rules, I have tried changing view settings and filters. Nothing seems to work
(as seems to be the case with most of microsofts products) I have a number of issues with this new look office, but this is the one that annoys me the most. I have workarounds for most of the other issues.
I would like to go back to office 2003, however this is part of a major upgrade (depending on your point of view) to our systems and as I am only an end user however I will not get a say.
If all else fails I will be blind by the end of the week and it will no longer be a concern (We have office 2013 on one screen and navision on the other) I suspect health and safety will insist on snow googles as standard equipment.
Any help or pointers from fellow sufferers would be greatly appreciated.
Outlook provides the keyboard shortcut of Ctrl + < (Last item) and Ctrl + > (Next item) to view the message after we open the email item.
Tony Chen
TechNet Community Support
Similar Messages
-
I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)
In your email settings on the phone check to make sure it is set to receive emails on cellular network. It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on.
-
Receiving emails when I want to
How do I set up my 8520 curve to only receive emails when I want it to? At the moment it is constantly going of all day telling me emails have come in and I would just like to be able to open a inbox and then they all come in then..Like my PC
is this possible?
If not can I turn off the notification of emails received so it don't keep bothering me all day long ?It is a push device.
Set your Sound profile to Phone calls only or all alert off.
Maybe a holster would be good too, I set it up so that most alerts only do a short vibe in holster.
This is what I do to sleep at night.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Invalidate session when user clicks back button
I want to invalidate the session when user clicks back button, so that user cannot refresh and reload a page.
Any suggestions will be highly appreciated.
Message was edited by:
sam_amc* SessionInvalidator.java
* Created on October 27, 2006, 9:18 AM
package web;
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author javious
* @version
public class SessionInvalidator extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
String reposted = request.getParameter("reposted");
if("true".equals(reposted))
HttpSession session = request.getSession(false);
if(session == null)
// This is step 4 and beyond
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("I said, your session is now invalid! Now where are those Duke Dollars at?");
out.println("</body>");
out.println("</html>");
else
Integer hitCount = (Integer)session.getAttribute("hitCount");
if(hitCount == null)
// This is step 2 (the "good" - "stay" page.)
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("Your session is good.<br>");
out.println("If you click the browser's back button, you will invalidate your session.");
out.println("</body>");
out.println("</html>");
hitCount = 1;
session.setAttribute("hitCount", hitCount);
else
//We've used up our good visit
session.invalidate();
// This is step 3
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("Your session is now invalid");
out.println("</body>");
out.println("</html>");
else
// because the javascript in the following output will never allow a user
// to continue clicking back any further than this, we can safely create the session.
// (or perhaps the session can already be created here and this may not be necessary).
// A problem lies where if the user chooses to "select" a page back in history they thereby
// potentially skip back "over" this functionality, thus defeating the purpose of it.
request.getSession(true);
// This is step 1 (indirection)
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet SessionInvalidator</title>");
out.println("</head>");
out.println("<body onload=\"document.getElementById('invalidatorForm').submit()\">");
out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
out.println("<form id=\"invalidatorForm\" action=\"SessionInvalidator\" method=\"POST\">");
out.println("<input type=\"hidden\" name=\"reposted\" value=\"true\">");
out.println("</form>");
out.println("</body>");
out.println("</html>");
out.close();
// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
// </editor-fold>
}The problem with even attempting to do this is that with today's browser capabilities, users can optionally choose to jump to a particular page in the browser history and this may not necessarily be the most recent page. In this case, you would also want to invalidate the user's session after already having been there (whatever page that may be). Then you have situations when the user may wish to jump back in history to external pages they were visiting before they reached your own site's pages. Then what happens when they start clicking forward, forward, etc... from there? This is why I prefer writing Swing Clients as alternatives to browser applications. There are soo many possible ways break web applications made for standard web browsers both maliciously and simply by accident or irregular user patterns. Regardless, this servlet would work based on the assumption that all the user(s) would "ever" do aside from moving logically forward is clicking on the browser's "back" button.
cheers!
Message was edited by:
javious -
I am getting my iphone inbox bombarded so would like it to not receive emails when connected to my computer. My old blackberry had an app that took care of this which worked really well. Am wondering if I can do the same with my iphone4.
Blackberries were/are able to do that with some types of e-mail accounts because the mail is routed to an intermediary (BlackBerry Service).
There is no equivalent for the iPhone as the phone communicates directly with the mail servers and does not go through a 3rd party. -
I am a new at this. I just rented and downloaded a movie, clicked out of iturnes and now when I go back into itunes, I don't see a way to play the movie that I just downloaded ten minutes ago. I just want to watch it on my laptop.
Help.Welcome to the Apple Community Vane_paranormal.
If you rent a movie on your phone, you have to watch it on your phone, likewise if you rent it from the Apple TV you will have to watch it there.
If you want to watch a rental on multiple devices, rent it from a computer. -
How to make the page expired when user click back
how to make the page as expired when i click back button on the browser.
i want a better way.
actually i have a timer.when it reaches 00.00 then the expired page will be called automaticlly using location.href="expired.jsp" then if the user clicks back it should not show the previous page.this concept is applied with paging concept
response.setheader is not working ...
i have redirect when click back using
<body onunload>....i call another page here.
but it is not a good way.
so pls help me to solve this problem
using session or another good wayUse this instead.
Frame.setDefaultCloseOperation(javax.swing.WindowConstants.DO_NOTHING_ON_CLOSE); -
My Iphone 4 will not receive email when connected to wifi,works fine on 3G
My Iphone will not receive emails when connected to wifi,works perfect on 3G
Arrr I have this prob to and this has been driving me made i thought it was a network area have changed providers brought different sim cards to get new numbers deleted everything off my iphone to reset it and still no luck..
After reading your comment it has actually been since I have updated my phone.
I have to turn off my phone everyday as I fly and i need to recieve messages when my phone is turned on if this isnt resolved quickly I am going to have to switch from Apple but I dont want to...
Apple can you please advise if this is going to be sorted asap? Alot of people dont turn there phones off all of the time so wont notice however for those of us that do and have to this is a really HUGE ERROR that needs your QUICKEST ATTENTION !
Thanks ;-D -
Why I cannot send and receive emails when I am in other countries other my original
Why I cannot send and receive emails when I am in other countries other my original country ?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
Cheers, Tom -
How do I receive emails when I am not on WiFi
I recently purchased a Galaxy Note 2. I am unable to receive emails when I am not connected to Wifi. I spent a couple hours on the phone with the tech from Verizon Help Desk and the gal I spoke with tried everything to help me and I still cannot get my emails on 2 different accounts unless I am connected to Wifi. Please help!!!
One is my personal email set up in the email app and the other is my business email set up on the Microsoft Exchange ActiveSync. I have already tried removing and reentering which is not possible unless I am tethered to someone elses phone or I am on Wifi
-
TS3899 Why cannot I receive emails when my iphone5 is on gprs.
Why cannot I receive emails when my iphone5 is on gprs.
thanks. I was reading some of the other postings that I see on this page and got that impression. Not sure what IMAP is but I'll keep reading and see if I can figure it out. I saw something that said a Mac.com email was IMAP so maybe I need to start using that instead of my Charter acct. I know my work is an exchange account. I have an Iphone, Mac and Ipad and need to start figuring out how all these work together and get more educated on this. Thanks for your time.
-
Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here. -
I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
When I click systems preferences, the folder doesn't open. How to I again access systems preferences?
Are you an administrative user?
Are you using any tools which impact System cache? If you are, stop. They are NOT maintenance tools despite their description. They should only be used to troubleshoot cache issues. They can create their own cache issues if you aren't careful, and I only recommend using them on systems that are already backed up. If you were using such a tool and found out how to remove it from its developer, including any supporting documents, and don't have a backup, still backup your data at least twice, as you may be able to import the data back once erase and installing the system. Let us know where you stand. If you aren't using such a tool, still backup your data at least twice, as there are other things that can corrupt or disable System Preference launching, but we can't tell safely unless your data files are backed up at least twice in two separate locations. -
When I click on my desktop folder in the sidebar, I get a screen titled: Desktop-bash-80x24...
When I click on my desktop folder in the sidebar, a screen comes up titled "Deskto-bash-80x24". On the screen it reads: "Last login: Thur Feb 16 17:23:49 on ttys002
(name of my mack): desktop (my name)$
And, the "terminal" icon appears in the dock.If that doesn't do the fix try this fix from Linc. https://discussions.apple.com/message/17853661#17853661
Maybe you are looking for
-
How do I recover a "lost" font in Pages? The font file appears to exist in my MS Office area.
How do I recover a lost font in pages? The font management process seems very opaque, lots of areas on the hard drive with font folders. None seems to match the list of fonts I can pull down from the font menu in Pages. At the moment, the font I n
-
How do i save my resume in pages so others can view it as a word document
how do i save my resume in pages so it can be viewed by others as a word document? every time i upload the pages version(which was originally a word resume), it cannot be read or attached
-
I just got my iphone4s and i cant get my pics and music from my memory card from my previous phone
i just got my iphone4s and i cant get my pics and music from my memory card from my previous phone
-
My Gopro camera has a time-lapse option/feature that takes one photo every X seconds. You can then import those photo stills onto your computer, which I have done. For a 30 minute time-lapse "video," I've collected a little over 1000 stills and hav
-
Hello, I want to update my iPhone 5s from 7.0.2 to 8.0.2 but when I try to do this from the phone, it says that time left for downloading is 72 hours also was trying to update from iTunes on PC, but it stop when "connection to the software update ser