View not showing complete record
hello,
My view object has 4 fields ,
company id, company name, street and pin
when the view object is dragged and dropped iam not getting the complete name displayed in the company name field.
is there anyway that we can increase the column width in the adf table.
Below is the checklist :
1. Make sure you have same number of filters/ restrictions in both the queries.
2. Make sure you are not using any authorisation object.
3. Make sure the technical names of the objects you are using in the query are name.
4. Make sure both the queries are on the same multiprovider.
5. Make sure both are of same version.
These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
Thanks,
Similar Messages
-
How can I Print the next 4 or 5 weeks from iCal in month view (not simply complete months)
How can I Print the next 4 or 5 weeks from iCal in month view (not simply complete months).
I'd like to print the next (up an coming) weeks of my calendar from iCal in month view - The idea is to get this information on 1 sheet of A4.. just like the month view.. but as far as i can see the month view only gives you current or next complete months.. The ONLY time this give me the view I want is in the first week of any given month.. the rest of the month part of the print is in the past and not enough of the up and coming weeks are shown?
I can believe the app won't allow you to do this .. am I missing an easy fix.. or has it been rectified in Yosemite .. I'm using mavericks 10.9.5.
ThanksHope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Query not showing complete data
Hi,
I faced this issue many times. Original query is not showing complete data but when I create a new query with same rows, columns and filters it gives correct data. Do anybody have any idea what can be the problem?Below is the checklist :
1. Make sure you have same number of filters/ restrictions in both the queries.
2. Make sure you are not using any authorisation object.
3. Make sure the technical names of the objects you are using in the query are name.
4. Make sure both the queries are on the same multiprovider.
5. Make sure both are of same version.
These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
Thanks, -
Itunes is not showing complete sentences
My itunes is not showing complete sentences. For example the first option in the options box when my iphone is connected says "sync with this iphone over...". im currently running windows 7. Nothing i cant guess but it gets on my nerves. Please help thanks
It appears this problem can arise in some cases when the Segoe UI font isn't properly registered.
Close iTunes
Open the folder C:\Windows\Fonts, or %Windir%\Fonts if Windows is in a non-standard location.
Click the menu File > Install New Font...
Select the Fonts folder in the folder panel, the panel above should list all fonts.
Scroll down the list of fonts and select Segoe UI (True Type), then click OK
Start iTunes
Any better?
tt2
Oops, just seen you got it fixed -
Why do views not show up in HTML DB?
All,
When I create a new view with SQL/Plus why doesn't it show up in HTML DB? Views that were created previously (before install of HTML DB) are visable.
ThanksJust FYI, I had a problem with views not showing up when using the wizards. Reported the problem and was told it was a bug. Workaround was to create my pages from scratch and explicitly reference the tables instead of the views.
Although HTML DB could handle some views, views that were based upon other views or where there were several layers of views seem to give HTML DB a problem. -
Why is the icon for street view not showing up on the left side of the location on the maps app?
Because the included Maps app no longer gets the maps data from Google, so no more street view.
You can get a free Google Maps app from the iTunes App Store. -
CRM_DNO_MONITOR not showing any records
CRM_DNO_MONITOR shows all the records if using the userid used in the configuration of the service desk but does not show any records if using any other user. We even gave SAP_ALL and SAP_NEW but still does not show any records. We've gone through all the threads in SDN related to this issue but no help.
Please provide any suggestions.
LalitHi,
does not show any records if using any other user.
Check the following
1. If the user has a Business Partner (BP) number
2. If yes, whether his User name has been configured in Identification tab for the BP under Employee role
You can try this in CRM_DNO_MONITOR
1. Change the Status to "All"
2. Change the Layout
Regards,
Rajesh Kumar -
Execution results panel does not show deleted records
Hi,
For OWB 10.2.0.2, i can succesfully run the mapping. But the Excution Results panel does not show deleted records. Shows 0 eventhough it actually did delete the records.
Does anyone have suggestions?
Thanks,
RajHi,
According to your post, my understanding is that you saw the different results for everything and people search tabs.
It is by design in SharePoint 2013.
There are four search experiences that are available on a default enterprise Search Center results page. Each search experience uses a different result source.
Everything search experience use Local SharePoint Results sources.
People search experience use Local People Results sources.
Local SharePoint Results specify all items from the local SharePoint search index except People items.
Local People Results specify People items from the profile database of the User Profile service application.
More information:
Understanding result sources for search in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
AP_Checks table not showing any records.
I am using oracle e-business suite 11.5.x. The table ap_checks is not showing any records at all. Please let me know as when i have to look into ap_checks and when into ap_checks_all table. The code that i am looking into is running for very long time and am sure the ap_checks is waht it is pointing to and it is correct.
Hi.
What is the result of?:
SQL>SELECT DISTINCT org_ig FROM ap_checks_all;
Octavio -
Crystal Reports XI Release 2 Viewer Not showing when installed on 64-bit OS
Hello,
I'm having an issue with the Crystal Active X Report Viewer Control 11.5. I've got a VB .NET 2005 application that uses this control to view a Crystal Report. I created a Setup Project and added all of the required Merge Modules to it. It installs perfectly on both 32-bit & 64-bit OSes, but the viewer control does not show up when I launch my application on the 64-bit OS (it works as expected on the 32-bit OS). I've tried just about everything (including changing the target platform and using the Service Pack 6 Merge Modules among other things), but I just can't get it to work. The application doesn't error or anything, the form is just completely empty. Will this application work on a 64-bit OS?
Thanks!Hi,
This could be a good start:
What do I need to do to get the fastest issue resolution?
Next you might want to look here:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567
If you find above helpful then look here
How do I resolve 'bobj' is undefined issue?
Hope that helps.
- Saurabh -
CS3 - Design View not showing externally linked images
In CS3 Design View, externally linked images are not showing
up... i am only getting the place holder.
To prempt some questions:
1/ Links are correct and complete - apart from the fact that
they show up when previewing in the browser(s) - i have
crosschecked
2/ There are no spaces in the url
3/ In the 'View' menu, 'Display External Files' is checked
I had this problem before and escargo suggested saving and
rebooting. It worked then but strangely, today, that file is again
showing some of the externally linked images but not all. And on a
new file, created today, none of the externally linked images are
showing up... :(
I'm sure there's a simple solution to the problem... anyone
have any idea what it could be?
Thanks and cheers,
JJNope. Some show - some don't.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jhabrix" <[email protected]> wrote in
message
news:faom5n$9ku$[email protected]..
> Bump....
>
> Anyone have a solution to the above problem??? -
Report not showing all records
Hi ,
I have made a report but when i execute the report only the first page comes with 18 records but when I execute the same query from SQL*Plus then it shows 30 records.
Please suggest me how to solve ?
Bye
AshuHi,
what do you use to view the output? The Live Previewer in the Reports Builder? One idea ist that you have not seen the button for going to the next page; other reasons can be format triggers which supresses records or frame properties which doesn't allow more records (not expandable) or a group filter in the data modell ...
Regards
Rainer -
ALV GRID Report is not showing all records which is in internal table
hi all,
have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input. Example: it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
temporarily i have given excel output file from it_main table. excel file is showing all records.
here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
please give me some idea.
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
is_layout = wa_layout
it_fieldcat = it_fcat
it_events = it_events
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_main
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE text-204 " 'Error in Display the list'
TYPE 'I'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM. . "DISPLAY_ALV_REPORT
Best Regards,
Srinivashi
Please study this program and give me suggestions.
ALV Declaration
DATA : it_events TYPE slis_t_event, "ALV event
it_fcat TYPE slis_t_fieldcat_alv, "Field catalog
it_list_top_of_page TYPE slis_t_listheader,
c_tabname TYPE slis_tabname VALUE 'IT_MAIN'.
DATA : wa_layout TYPE slis_layout_alv,
wa_event TYPE slis_alv_event,
wa_fcat TYPE slis_fieldcat_alv,
wa_variant TYPE disvariant.
START-OF-SELECTION.
PERFORM material_pass.
PERFORM data_retrieval.
END-OF-SELECTION.
PERFORM sub_display_report.
FORM sub_display_report .
DATA status(1).
IF r1 = 'X'.
PERFORM build_fieldcatalog USING :
'1' 'ERDAT' 'S.O DATE' '' '10' 'X',
'2' 'VBELN' 'SALE ORDER' '' '10' 'X',
'3' 'POSNR' 'SALE ITEM' '' '6' '',
'4' 'BSTKD' 'CUSTOMER PO' '' '35' '',
'5' 'BEZEI' 'REASON FOR REJECTION' '' '40' '',
'6' 'PLNUM' 'PLANNED ORDER' '' '10' '',
'7' 'AUFNR' 'PROD.ORDER.' '' '12' '',
'8' 'MATNR' 'MATERIAL NUMBER' '' '18' '',
'9' 'MAKTX' 'MATERIAL DESCRIPTION' '' '40' '',
'10' 'WERKS' 'PLANT' '' '4' '',
'11' 'KWMENG' 'SALE ORDER QTY' '' '15' '',
'12' 'VRKME' 'UNIT' '' '4' '',
'13' 'GAMNG' 'PROD.ORDER QTY' '' '13' '',
'14' 'IGMNG' 'CONFIRMED ORDER QTY' '' '13' '',
'15' 'GMEIN' 'UNIT' '' '4' '',
'16' 'MENGE' 'G.R QUANTITY' '' '13' '',
'17' 'SOBAL' 'S.O BALANCE' '' '13' '',
'18' 'PRDBAL' 'PROD.BALANCE' '' '13' '',
'19' 'GSM' 'GSM' '' '4' '',
'20' 'SIZE1' 'SIZE1' '' '10' '',
'21' 'SIZE2' 'SIZE2' '' '10' ''.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = pathname
filetype = ftype
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = it_mains
EXCEPTIONS
file_write_error = 1.
IF sy-subrc = 0.
status = 'S'.
ELSE.
status = 'E'.
ENDIF.
ELSEIF r2 = 'X' OR r3 = 'X'.
PERFORM build_fieldcatalog USING :
'1' 'ERDAT' 'S.O DATE' '' '10' 'X',
'2' 'VBELN' 'SALE ORDER' '' '10' 'X',
'3' 'POSNR' 'SALE ITEM' '' '6' '',
'4' 'BSTKD' 'CUSTOMER PO' '' '35' '',
'5' 'BEZEI' 'REASON FOR REJECTION' '' '40' '',
'6' 'PLNUM' 'PLANNED ORDER' '' '10' '',
'7' 'AUFNR' 'PROD.ORDER.' '' '12' '',
'8' 'MATNR' 'MATERIAL NUMBER' '' '18' '',
'9' 'MAKTX' 'MATERIAL DESCRIPTION' '' '40' '',
'10' 'WERKS' 'PLANT' '' '4' '',
'11' 'KWMENG' 'SALE ORDER QTY' '' '15' '',
'12' 'VRKME' 'UNIT' '' '4' '',
'13' 'GAMNG' 'PROD.ORDER QTY' '' '13' '',
'14' 'IGMNG' 'CONFIRMED ORDER QTY' '' '13' '',
'15' 'GMEIN' 'UNIT' '' '4' '',
'16' 'MENGE' 'G.R QUANTITY' '' '13' '',
'17' 'SOBAL' 'S.O BALANCE' '' '13' '',
'18' 'PRDBAL' 'PROD.BALANCE' '' '13' '',
'19' 'GSM' 'GSM' '' '4' '',
'20' 'SIZE1' 'SIZE1' '' '10' '',
'21' 'CUT1' 'CUT1' '' '11' '',
'22' 'SIZE2' 'SIZE2' '' '10' '',
'23' 'CUT2' 'CUT2' '' '11' '',
'24' 'SIZE3' 'SIZE3' '' '10' '',
'25' 'CUT3' 'CUT3' '' '11' '',
'26' 'SIZE4' 'SIZE4' '' '10' '',
'27' 'CUT4' 'CUT4' '' '11' '',
'28' 'SIZE5' 'SIZE5' '' '10' '',
'29' 'CUT5' 'CUT5' '' '11' '',
'30' 'SIZE6' 'SIZE6' '' '10' '',
'31' 'CUT6' 'CUT6' '' '11' ''.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = pathname
filetype = ftype
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = it_mainall
EXCEPTIONS
file_write_error = 1.
IF sy-subrc = 0.
status = 'S'.
ELSE.
status = 'E'.
ENDIF.
ENDIF.
PERFORM build_layout.
PERFORM build_events.
PERFORM sub_comment_build USING it_list_top_of_page.
PERFORM sub_set_variant.
PERFORM display_alv_report.
IF status = 'S'.
MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
ELSE.
MESSAGE 'Download Not Possible' TYPE 'I'.
ENDIF.
ENDFORM. " SUB_DISPLAY_REPORT
FORM BUILD_FIELDCATALOG
FORM build_fieldcatalog USING p_col_pos
p_fieldname
p_text
p_datatype
p_outputlen
p_col_freez.
wa_fcat-row_pos = '1'.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fieldname.
wa_fcat-tabname = c_tabname.
wa_fcat-reptext_ddic = p_text.
wa_fcat-datatype = p_datatype.
wa_fcat-ddic_outputlen = p_outputlen.
wa_fcat-key = p_col_freez.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
FORM build_layout.
CLEAR: wa_layout.
wa_layout-window_titlebar = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-totals_text = 'CUMULATIVE'.
ENDFORM. "BUILD_LAYOUT
*& Form BUILD_EVENTS
FORM build_events.
CLEAR wa_event.
REFRESH it_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_events
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc = 0.
READ TABLE it_events INTO wa_event
WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'TOP_OF_PAGE'.
APPEND wa_event TO it_events.
CLEAR wa_event.
ENDIF.
ENDIF.
ENDFORM. "BUILD_EVENTS
-->P_IT_LIST_TOP_OF_PAGE text
FORM sub_comment_build USING it_top_of_page TYPE slis_t_listheader.
DATA ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = str1.
APPEND ls_line TO it_top_of_page.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header[].
ENDFORM. " SUB_COMMENT_BUILD
*& Form SUB_SET_VARIANT
text
--> p1 text
<-- p2 text
FORM sub_set_variant .
CLEAR wa_variant.
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = c_variant.
wa_variant-variant = p_layout.
ENDFORM. " SUB_SET_VARIANT
*& Form DISPLAY_ALV_REPORT
*Display Report Using ALV GRID
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
i_callback_pf_status_set = c_pf_status
i_callback_user_command = c_user_command
is_layout = wa_layout
it_fieldcat = it_fcat
it_sort = it_sort[]
it_events = it_events
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_main
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE text-204 " 'Error in Display the list'
TYPE 'I'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM. . "DISPLAY_ALV_REPORT
*ALV Report Header
FORM top_of_page.
DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_header-info = str1.
APPEND wa_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header[].
ENDFORM. "TOP_OF_PAGE
here it_main internal table having all data. but output is showing few records only.
pl. give some idea.
Thanks & Regards
Srinivas. -
Form does not show "new" records from SQL Database
I have a PDF form that pulls data from a SQL Server. The fields in
the PDF are populated from the database after selecting a specific
record from a drop down and then clicking on a button labeled "Fill".
The problem is that the dropdown does not display new records that
have been recently added to the database. I have to open the form up
in designer then save it, (*note - I change nothing at this point.)
Then when the form is opened back up in Adobe the dropdown show all
the records including the new ones. I even put a manual refresh on
form to try and fix this an it did not help. Seriously stumped.
Any help is greatly appreciated.
Here is my code for the dropdown.
++++++++++++++++++++++++++++
topmostSubform.Page1.JobSelect::initialize - (JavaScript, client)
var sDataConnectionName = "BBCC"; // example - var sDataConnectionName
= "Test";
var sColHiddenValue = "ContractAdmin_Key"; // example - var
sColHiddenValue = "Dept_ID";
var sColDisplayText = "JobDescription"; // example - var
sColDisplayText = "Dept_ID"
// Search for sourceSet node which matchs the DataConnection name
var nIndex = 0;
while(xfa.sourceSet.nodes.item(nIndex).name != sDataConnectionName)
nIndex++;
var oDB = xfa.sourceSet.nodes.item(nIndex);
oDB.open();
oDB.first();
// Search node with the class name "command"
var nDBIndex = 0;
while(oDB.nodes.item(nDBIndex).className != "command")
nDBIndex++;
// Backup the original settings before assigning BOF and EOF to stay
var sBOFBackup =
oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("bofAction");
var sEOFBackup =
oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("eofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayBOF",
"bofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayEOF",
"eofAction");
// Clear the list
this.clearItems();
// Search for the record node with the matching Data Connection name
nIndex = 0;
while(xfa.record.nodes.item(nIndex).name != sDataConnectionName)
nIndex++;
var oRecord = xfa.record.nodes.item(nIndex);
// Find the value node
var oValueNode = null;
var oTextNode = null;
for(var nColIndex = 0; nColIndex < oRecord.nodes.length; nColIndex++)
{ if(oRecord.nodes.item(nColIndex).name == sColHiddenValue)
{ oValueNode = oRecord.nodes.item(nColIndex); } else
if(oRecord.nodes.item(nColIndex).name == sColDisplayText) { oTextNode
= oRecord.nodes.item(nColIndex); } }
while(!oDB.isEOF())
this.addItem(oTextNode.value, oValueNode.value);
oDB.next();
// Restore the original settings
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sBOFBackup,
"bofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sEOFBackup,
"eofAction");
// Close connection
oDB.close();
++++++++++++++++++++++
Here is code for the refresh button
+++++++++++++++++++++
topmostSubform.Page1.Button27::click - (JavaScript, client)
sourceSet.BBCC.requery();
+++++++++++++++++++++pguerett wrote:
The other thing that might be happening is a refresh issue on the DropDownList. Try adding the command xfa.layout.relayout() after the database connection has been closed.
Paul
Good catch Paul! Would you believe that I have been trying to get this resolved for almost two years! Works perfect now.
Thank you,
- Eric -
IPhone 4 iOS 4.1 - Calendar App List View Not Showing Events Immediately
After upgrading to iOS 4.1, whenever I open the calendar in List view mode the events do not show up immediately. I have to navigate to the "Day" style or "Month" style before I can see any events. All the events are viewable normally in both the "Day" & "Month" style calendar but the "List" view.
I regularly sync my iPhone with iCal events and with Google calendar. I did delete and re-added the Google account but the problem persists.
Has anyone faced this problem? I will be doing a full restore again today. My wife's iPhone 3GS is working fine with the 4.1 build of 3GS.
Message was edited by: Raja RoyHello all,
I have the same issue with my iPhone 3G under iOs 4.1 (8B117) with one local calendar and three Google calendars. The first time the Calendar application is loaded, if it opens in "List" view, no events are displayed. Switching to another view is enough to get the items back. In "Day" and "Month" views, the events eventually appear after some time (~5 to 10 seconds).
My boyfriend has the same problem on his iPhone 4 under iOS 4.1 (less annoying because of multi-tasking).
Hopefully this will be fixed in iOS 4.2... :-S
Regards,
HAL1
Maybe you are looking for
-
Has anyone had any success with syncing a 4th generation iPod Touch in Windows 7 64-bit after upgrading the iPod Touch to iOS 5? Up until I upgraded the device's OS I couldn't for the life of me stop iTunes from popping up and trying to sync anytime
-
Problem with GUI_download in background
Hi all, When i ran the program in the background,the job has been canceled. the report should download the records into the local file have checked in debug mode the job has canceled when it comes to GUI_DOWNLOAD,GUI_download will not
-
Problem in Moving Files Locally after FTP
I am being stuck in the middle of my application development. What simple I need to do is to get all the files from location and put them all on FTP site. After doing FTP I need to put these files locally to other flder. I am done with FTP site files
-
How can I create my I-Tune backup to a hard disk or memory card instead of using a CD as the backup medium?
-
Increase and decrease a numerical text layer over time
I need to create a text layer with a numerical value that will range from 0% to 100% over time using key frames. I need the value to change over time, increasing or decreasing the percentage based on key frames. Any ideas? Thank you!