View of a large Document in a JTextComponent

Does a JTextComponent build a View of the entire Document
or only the small portion of the Document that's actually visible on the screen?

Hi,
I have a table where files are stored. The file could be of any type, including MS Word with pictures. You can see all files with description by a report. Fist column is "downloading".
You can get this example from (I think) "2 days Development Guide".
If you want to open a MS Word file, it could be done by using a job in Oracle. There was a discussion about that in the forum.
- First CMD
- WinWord Filename
I hope that this could help.
Konstantin

Similar Messages

Reformatting a large document in Pages '09

I need to completely reformat a large manuscript. I'm lost when it comes to changing the indent of paragraphs (the first in a section must be flush left, but all others slightly indented and right now mine are very wide) and I need to include page & name on top of left page, page & title on top of right page, except on new chapter pages which are without headers. Help?

ark-1 wrote:
I need to completely reformat a large manuscript. I'm lost when it comes to changing the indent of paragraphs (the first in a section must be flush left, but all others slightly indented and right now mine are very wide)
Create 2 paragraphs:
ParaFirst: +Inspector > Text > Tabs > Paragraph Indents > 0/0/0+
ParaFollowing: +Inspector > Text > Tabs > Paragraph Indents > 1cm/0/0+
Select each in turn:
+Menu > View > Show Styles Drawer > click on little triangle to right of paragraph styles > Create New Paragraph Style from Selection > Name > OK+
Select first paragraph again:
+Inspector > Text > More > Following Paragraph Style > ParaFollowing+
This will make paragraphs after the ParaFirst style automatically become ParaFollowing style.
and I need to include page & name on top of left page, page & title on top of right page
+Menu > View > Show Layout+
+Inspector > Document > Document > Document Margins > check Facing Pages > Header/Footer+
+Inspector > Layout > Section > Configuration > check Left and right Pages are different+
Click in the Headers and type the text you want on each side followed by:
+Menu > Insert > Auto Page Numbers… > Choose whatever format you want+
The Text and page numbers can be formatted as you wish and positioned using tabs.
except on new chapter pages which are without headers.
Go to the following pages of the section and click in the text of of that page:
+Inspector > Layout > Section > Configuration > First page is different+
Go back to the 1st page of the section and delete the contents of the Header there.
When you have everything the way you want:
+Menu > Format > Advanced > Capture Pages… > Name: > Include: > First 3 pages > OK+
+Menu > File > Save as Template… > Name > OK+
Peter

Have Windows XP and Adobe 9 Reader and need to send a series of large documents to clients as a matter of urgency When I convert 10 pages a MS-Word file to Pdf this results in file of 6.7 MB which can't be emailed. Do I combine them and then copy

I have Windows XP and Adobe 9 Reader and need to send a series of large documents to clients as a matter of urgency When I convert 10 pages a MS-Word file to Pdf this results in file of 6.7 MB which can't be emailed. Do I combine them and then copy to JPEG 2000 or do I have to save each page separately which is very time consuming Please advise me how to reduce the size and send 10 pages plus quickly by Adobe without the huge hassles I am enduring

What kind of software do you use for the conversion to pdf? Adobe Reader can't create pdf files.

How have a list view of last published documents when you are a contributor ?

Hello,
thanks for your help.
here is the problem :
- A library is set with versionning (draft and published) documents.
- the library contain this documents
- DOC A : version 1.3 : version 1.0 is published
- DOC B : version 2.4 : version 2.0 was unpublished
- Adam is a contributor of this library. He can create, edit, delete, publish, unpublish a document. His list view display DOC A v1.3 and DOC B version 2.4.
- John is a reader of this library. He can only read the published documents. His list view display DOC A v1.0 only.
To manage this library, Adam want to have the same view of this library as John. He want to view only the published documents.
How can I give a published document view to Adam ?
My first reflexe was to do a view filtering the versions containing ".0". The problem is that DOC A not appear, because the visibility version of this document is 1.3 for Adam (and 1.0 for John)
How can I give him a published document view? perhaps with programmation, SharePoint Designer,...
thanks for every help and samples.

Give Adam a test account with the same permissions as John. It's the only way to be sure.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

How do I increase the font size of a large document?

Whenever I try to increase the font size of a large document, the text boxes cross their boundaries and mix with each other, or partly disappear at the end of every page. Do I really have to adjunst every text bos in the document or is there a faster way? Im having this issue with adobe acrobat 11 pro

This is not a feasible thing to do. Editing a PDF is a desperate last resort for so many reasons.
Whatever you need to solve, you are unlikely to solve it in Acrobat. Probably best to export text and remake it.

How can I change a page position in a large document?,

How can I change a page position in a large document?

Question asked and answered many times !
Insert a section break just before the page to move.
Insert a section break just after the page to move.
Select the page's thumbnail
cut
Insert a section break where you want to insert the page.
paste
The required infos are available in Pages User Guide which isn't delivered to help helpers to help you.
Yvan KOENIG (VALLAURIS, France) mercredi 5 octobre 2011 14:33:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Can't print large documents.

For years, we've been printing large documents to our plotter without issue. Suddenly last week, nothing large will print.
I've seen a few different error messages, and have tried different computers, and different versions of Illustrator, but nothing large will print.
When trying to print, I currently get the following:
I've also seen an error suggesting not enough memory is available, which is bogus. And I think another error that was more vague, something to the effect of "can't print"
I've setup a clean install of illustrator on a clean windows install, same issue.
I setup an alternate print server with our rip software, same software we've been using for years. Same error on the alternate server.
Nothing changed, and it's effecting everything here, and new installs. I don't know what happened, but this is getting critical, we need the ability to print.

EFI eXpress v. 4.1
This all worked fine until a week ago, so I don't think there should be a hardware software compatibility issue. The software and hardware were all working fine, and then we got blindsided by this stubborn error that came out of nowhere, won't go away, and has no error or log that gives us any useful information.
It isn't a font issue. I've created a basic test document that just consists of the word test. Using this same font, I've had success printing documents that are 37"x79", 39"x75". But, when I print 39"x79", it fails. i've not zeroed in on the size that seems to be the cutoff, but I knew that a 37x75 worked, and 40x80 didn't, and 39x79 didn't either. So, playing around with the numbers I found the above that did work.
Also, using the general epson driver that you can get on epson's site, any print job can be sent without issue. It's just that anything beyond 90 inches gets cut off.
I suppose this suggests the problem lies with EFI. But, a clean install of EFI didn't resolve the issue. What it comes down to for me is, the error is generated from Adobe. So, at the least, I'd like an explanation from Adobe as to what the error is, since their software is generating it, and giving me no reason why it failed. Plus, there's no way I can justify to management the cost of bringing in a 3rd party support for the EFI software, unless I have a better reason why the EFI software worked last week, but not this week, so I really need better data out of Adobe as to why it fails.
I currently have a paid case open with Adobe, but they seem to be having difficulty as well, so far it's been a lot of time on hold, and a little bit of "try this, try that, try this", which is getting nowhere. I need something more methodical to happen, and some actual following of data, or checking of logs, to get some detailed information, hopefully the case will get escalated to someone with a bit more in depth knowledge on these things.
I will keep posting the details here as they emerge, because there's nothing I hate more than a forum thread with a problem I'm experiencing, that doesn't end with an answer. I think forums should do a better job of either posting a resolution, or purging the cases that don't resolve, to get rid of the useless junk that clogs the internet and wastes people's time searching for answers.

8500 A909a Won't Print Large Documents

My OfficeJet Pro 8500 A909a will not print large documents. Prints fine on websites, 2 or 3 page docs but nothing larger. Trying to print a mail merge of 450 letters - print spooler goes though normal proces but printer never prints - it just beeps when the print spooler is completed. Printer is installed ethernet on XP. HP check software reports OK. Thank you.

Take a look at this HP support page.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Links in each page of a large document

I have a 350+ pages PDF document and would like to add a link to the TOC in each page. Obviously not one by one because this would take a lot of work/time.
I thought to use a general header or footer with the linked text. But I don't know how to put linked text in a header/footer. Can this be done?
Is there any other way you know to easily add a link to all pages of a large document?

Another way is to put your link in a button: buttons can be duplicated to all (or a range) of pages. If you don't like a button that 'looks like a button' just use 'no border, no fill', or even an icon to customise it.

Why can't I import the u3d file as a view onto my pdf document?

After searching the web I finally found the instructions on how to import a 3d view onto a PDF document using Acrobat 7 Pro.
I created the .u3d file and clicked on the TOOLS menu, then ADVANCE EDITING and then 3D Tool. I highlighted an area where I want the 3d view to be and the ADD 3D content window shows up. I then brouse to select my .U3D file and click the OK button. But nothing happens, why? Maybe I need to install more options? Does anyone know?

garymewis wrote:
.. I have created a 17 min copy of a short film I made and imported it onto the hard drive of my iMac. It's a seemingly straightforward MP4- Video file ..
iso-conform mpeg4 ? or, perhaps a mp4 container with e.g. DivX encodings...?
with what app did you create this file?
which audio + video codecs are in use in this 'MP4' ?
iM09 is no 'all purpose' editor, supports a very small range of codecs, and is meant for camcorder imports..
download the free converter tool *Mpeg Streamclip* www.squared5.com
convert your file to 'mpg4' , or AppleIntermediate, or h264, or motion jpeg..
ahh, and Welcome, garymewis, to the  iMovie boards ...

Initial View set in PDF Document not working.

I have a PDF document w/Initial View in the Document Properties set to Navigation tab: 'Bookmarks panel and Page', and Open to page '1''. However, when I send this document out, the Initial View settings do not happen (The PDF opens to the page last accessed before the document was sent and the navigation pane does not display). Help - what am I missing or doing wrong when trying to distribute PDF?
I am using Acrobat X Pro.

It might be the settings in Acrobat that is causing the problem. Edit – Preferences…, under Categories select Documents. Uncheck Restore last view settings when reopening documents.

How do I view/print a pdf document in an email? I'm not getting the little hand icon.

How do I view/print a pdf document in an email? I'm not getting the little hand icon.

Ah, yes, I'm using Adobe Reader! That makes sense. Thanks so much for your reply. At the moment, I scan Word documents into my computer and they're automatically converted to PDFs. If I had Adobe Acrobat on my computer, and scanned in documents, would they open in Reader automatically or could I open them in Acrobat and therefore add password protection?

After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

"Restore last view settings when reopening documents" option not working with all documents

Said option (found under Edit/Preferences, category Documents), which works like an automatic bookmark in that it takes you back to the same place you were at when you last closed a document, is very useful, but apparently doesn't work with *all* documents.
- Does anyone know what determines whether a given document works with this option or not?
- Is this by design or a bug? A matter of PDF format version?
- Is there a way to work around the problem?
I've compared two documents, only one of which works with the option, to determine what the relevant difference may be, and found two suspects (under File/Properties): the PDF version (1.5 in the document that works, 1.4 in the one that doesn't), and 'Fast Web View' ('yes' in the document that works, 'no' in the one that doesn't).
Thanks,
Michael

This seems to be a problem with some PDF files.
Suggested workaround: If the PDF you have allows "Save As", then try save-as to a new file. The "Restore last view settings when reopening documents" option should then work as expected (in the new file).
(Original post: Restore last view setting not working in version XI)

Larger Document Appears Black and Displays Incorrectly

Hello,
I have just purchased Web Premium CS4. Photoshop CS4 Extended was included with the package and I installed and ran it. Sadly any large document I tried to open appears black and sometimes when I zoom in partly displays with random black lines through it. I have checked my system's specs and they all match up with the requirements. I am running Vista SP1 on a Dell computer. I have read all the knowledge base articles relating to this matter and have done everything they said (including disabling OpenGL, etc.) but still the problem continues. Is there any way or patch/addon to fix this?
Thank You So Much,
Bailey

Do they open up in other images manipulation software packages? Try CS3 if you have it.
What size, format (psb, tiff, etc) are they?
I've only experienced what you say with corrupt files...I hope that's not the case here.

View of a large Document in a JTextComponent

Similar Messages

Maybe you are looking for