View of all 5Application server logs from one system

Hi
With my client  1-Central Instance & 4- Application servers has got installed,All 5 servers status look active from sm51,while i look into sm21 it shows only particular server through which i logged in, want to view all 5 servers system logs in one screen so i followed the following path :
SM21 ---> SYSTEM LOG ---> CHOOSE --->  REMOTE SYSTEM LOG / ALL REMOTE SYSTEM LOGS ---> REREAD SYSTEM LOG
By following the above mentioned path also i am not able to view the global system logs.
Can any one suggest me to perform any more activities so view all the servers logs .
Sankar

Please check this link
http://help.sap.com/saphelp_nw04/helpdata/en/1f/8311c64bc511d189750000e8322d00/content.htm
The very first line states:
This section does not apply to R/3 Systems running on IBM AS/400 and Microsoft Windows NT hosts. Central logging is not available on these platforms. See below for details on central logging with Windows NT systems.
central logging is not available on windows operating system.
Also check the section Central Logging with Windows NT
for avoiding warnings related to central logging .
Regards
Ratnajit

Similar Messages

  • Export or transport all the RFC destination from one system to another syst

    Hi
    Is there any method to Export or transport all the RFC destination from one system to another system

    Hi,
    the information is stored in table rfcdes.But there are also some other RFC*-tables which have some relations. Nevertheless the RFC-connectons will possibly not work anymore  in the new system(depending on the release your systems are), as the passwords are stored in the Sec store with system-dependent keys.
    b.rgds, Bernhard

  • I recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?

    i recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?
    Jim Boehme
    [email protected]

    Duplicate post
    see the answer at your earlier post LR 5

  • Can i use my icloud account on more than one iphone.  I would like to find my iphone or wipe all of my iphones from one account

    I want to be able to use find my iphone or wipe all of my iphones from one account.

    Yes- See  Using Apple  ID  on  more than one device
    (870)

  • How do i transfer all of my itunes from one computer to another

    how do i manage to transfer all of my itunes from one  computer to another?

    Copy the iTunes library folder from one computer and restore it on the other. Use an external hard drive.

  • How do i migrate all my imovie projects from one computer to another

    how do i migrate all my imovie projects from one computer to another

    You need to attach the computers to one another say with a firewire cable? Or use an external hard drive to copy the Events/Projects and then move the hard drive to the other computer. Are you able to do either one of these first?

  • Why are my emails not deleting from all devices when deleted from one?  I have iCloud set up and turned on. I have ipad2, iphone5 and a Mac. What am I doing wrong?  Thank you

    Why are my emails not deleting from all devices when deleted from one?  I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong?  Thank you.

    It depends on the type of email account you are using, not on iCloud.  If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices.  If you are using a POP (POP3) account, it won't.  (iCloud email, Gmail and Yahoo are all IMAP accounts.)

  • Has anyone used Migration Assistant to move services from one system running Server to a new system?

    So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server.  In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers.  The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases.  There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
    Has anyone used Migration Assistant to move services from one system running Server to a new system?  Are there any details that are particularly important to get right?  Are there things that require manual steps after Migration Assistant is done?
    There are other ways I could tackle the problem, of course.  I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them.  That would complicate such an approach.  I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

    yes. I migrated a server frm lion to mavericks following these notes a while back:
    OS X Server: Upgrade and migration from Mountain Lion
    i do not recall having any problems with it.

  • Migration of Work Items from one system to another

    Dear Experts,
    We are migrating an application from one system to other and it involves BI, Webdynpro, BSP and workflow. This is mainly a portal application which involves BI as the backend. While migrating the application with the existing data we also require to migrate the open Work items of the Users.
    Can anyone help us in migrating the Work Items or the possibilities of doing the same.
    Useful suggestions will be appreciated.
    Thanks,
    Prabhakar M

    Hi All,
    Am opening this thread again.
    Using Transaction SWW_SARA I have Archived the Completed and Cancelled workitems in one Production system(For Ref, P1) and it got stored as a File in the Application Server.
    But while I tried to view the archived workitems via the same Transaction I can see only the header of the Workitem and not the detailed information of the same.
    Is this the only method to view the archived Workitem or any other way is available to view the detailed Information. Also is it possible to transfer the archived file to another Production system and view the workitems?
    Please help me in finding the solution for above scenario.
    Regards,
    Prabhakar

  • Getting error in file transfer from one system to another system

    Hi All
    One of my client (User) wants to transfer his file from  SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the  program he is getting error "File Transfer Failed due to Network chk with Admin"
    I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
    Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Please help me to resolve this problem. I any detail require I will provide the same.

    Guruprasad Wrote:
    He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
    If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
    Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
    Regards,
    Raghu

  • Brachive takes long time to copy from one system to another

    HI TO ALL,
    I AM USING IBM BLADE SERVER AND CONNET TO SAN WHEN I SHEDULE BRARCIVE / BRBACKUP ON ANOTHER SERVER (ANY SERVER ) IT TAKES LONG TIME TO COPY ARCHIVE FROM ONE SYSTEM TO OTHER SYSTEM.
    I AM USING DB ORACLE 9i and SAP 4.7 EXT 1.1
    REGARDS,
    VIKAS NAGAR

    - how big are the files you copy?
    - are both machines connected in the same network segment?
    Markus

  • Send PO from one system and create a SO in another system

    Hello Gurus
    ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
    What i am planning to do:
    Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
    Steps i am planning to do:
    1). Configure the sending system for a outbound PO idoc
    2). Configure the receiving system for a Inbound SO idoc
    3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
    Questions:
    1). Am i missing any steps?
    2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
    ~Suresh

    Hi Suresh,
    this might be of some help.
    ALE IDOC
    Sending System(Outbound ALE Process)
    Tcode SALE - for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Create Model View
    Tcode BD82 - Generate partner Profiles & Create Ports
    Tcode BD64 - Distribute the Model view
    Message Type MATMAS
    Tcode BD10 - Send Material Data
    Tcode WE05 - Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE - for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 - Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Create Model View
    Tcode BD82 - Generate partner Profiles & Create Ports
    Tcode BD64 - Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE - for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 - Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 - Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 - Send Material Data
    Tcode WE05 - Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Change Pointers
    I know how to change the description of a material using ALE Change Pointers.
    I will give the following few steps
    1) Tcode BD61---> check the change pointers activated check box
    save and goback.
    2) Tcode BD50---> check the MATMAS check box save and comeback.
    3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
    4) Tcode BD52---> give message type : matmas press ok button.
    select all what ever you want and delete remaining fields.
    save & come back.
    5) 5) go to Tcode MM02 select one material and try to change the description and save it
    it will effects the target systems material desciption will also changes
    6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
    give Message type : MATMAS and Executte
    ALE/IDOC Status Codes/Messages
    01 Error --> Idoc Added
    30 Error --> Idoc ready for dispatch(ALE Service)
    then goto SE38 --> Execute the Program RBDMIDOC
    29 Error --> ALE Service Layer
    then goto SE38 --> Execute the Program RSEOUT00
    03 Error --> Data Passed to Port ok
    then goto SE38 --> Execute the Program RBDMOIND
    12 Error --> Dispatch ok
    Inbound Status Codes
    50 Error --> It will go for ALE Service Layer
    56 Error --> Idoc with Errors added
    51 Error --> Application Document not posted
    65 Error --> Error in ALE Service Layer
    for 51 or 56 Errors do the following steps
    goto WE19 > give the IDOC Number and Execute>
    Press on Inbound function Module
    for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
    kindly reward if helpful.
    cheers,
    Hema.

  • Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

    Hi Experts,
                 I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
               I'll get all the required data with field in an excel file.
                 Does any standard transaction exist for it ? Or how to go ahead with it ?
    Thanks and regards,
    Jyoti Shankar

    Hi
    If you are checking for CREATE option then Sales Doc Type
    For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
    Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
    That will show the MANDATORY parameters...
    Reward if helpful....
    Message was edited by:
            Enter the Dragon

  • Transport system objects i.e. contents of table t100 from one system to ano

    hello all,
    how do i transport contents of table t100 from one system to another...
    tried creating a transport request... but when i got an error when used r3tr tabu t100... i got a pop up saying
    "System objects cannot be transported directly"
    know abt restore... any other way of doing it...
    Regards, Jatin

    Hello all,
    Thanks for the support so far...
    to clarify the problem in more detail...
    when i add R3TR TABU T100... and hit enter... i get the error message at the bottom of the screen...
    " System objects cannot be transported directly (e.g. T100, TRDIR, TFDIR..) "
    When i double click the error message, i get a pop up, detailing the "KINDS" of tables which cannot be
    transported. (like in my case is t100)...
    The only help which i get at the bottom of the popup is...
    "Direct transport of these table entries is only allowed for special tools, such as the client copy program."
    Any other way of doin it...
    Regards, Jatin

  • IDOC from One System to another

    Hi All,
    I am sending idocs from one system to another For Eg System A to System B .
    Now suppose 2 idocs are generated 1 and 2.
    Now how to determine , for idoc 1 in system A, what is the corresponding Inbound Idoc in System B because the data which is coming in System B might be different than in System A for the same Idoc?
    Thanks in Advance.

    Hi,
    direction 1 for outbound idoc,
                  2 for inbound idoc,
    goto tcode WE02
    enter direction - 2.
    creation date
    and basic type i.e. idoc type
    double click on an idoc num.
    on L.H.S  u have 'Control REc'  double click on it..
    it contains all the sender details and to what outbound idoc it corressponds to  -> basic type, message type
        -> Partner details like partner num, port, partner type
        -> date & time of creation
        -> and the other details
    Regards,
    Neelima.

Maybe you are looking for