View of Org models
Hello,
When I'm in the transaction 'Maintain Organizational model', how do I get a view of all the Organizational modal that there are in the system?
I would apprectiate a simple explanation that suits the point of view of someone who isn't familiar with the system
Hi Iris,
Once you goto transaction PPOMA_CRM (Maintain Org Model), on the left hand side in the transaction, there are 4 things:
Find By:
Organizational Unit
Position
Employee
User
Inside each of these four thing, again there are two things:
- Search term
- Structure Search
Once you click on Find By Structure Search, you will get all the Higher level org unit created in your system. You can view those by double clicking on each of those, in order to find the assgined Positions, Users and so on.
I hope this will help you in viewing all the org model in your system
regards
Srikantan
Similar Messages
-
NAKISA Org Modeler additional features
Hi Experts,
We have implemented NAKISA Org Modeler 4 SP 1. We would like to get insight on below mentioned points and if this can be achieved using standard or by enhancement.
1. Is there any preferred screen size to view Nakisa Org Modeler (Org Structure) ?
2. Is there a possibility to create Job and Job Family in Nakisa Org Modeler?
3. Nakisa Org Modeler has approval functionality, however there are no mail notifications available for user to communicate that the task is complete. Can we implement the mail feature?
4. Once the scenario is approved and user executes “Write Back” only OM data is updated, is there a out of box solution to update PA transaction as well (other than using RHINTE reports)?
5. When creating a position – Attributes Employee Group, Personnel Area and controlling area has hard stop not to enter data but to choose from pop up. Is there a possibility to convert this into drop down or editable field?
Regards,
Jijeesh1) Not that I'm aware of.
2) Not in the standard product.
3) Not that I'm aware of.
4) No. See p81 (4.1 doc) of the Admin Guide entitled "OM/PA Integration After Writebacks"
5) This may be possible but might cause you lots of complications. What is the reason for wanting to avoid the pop up screen to enter the data?
Stephen -
Where would I find concise help info on the organisation model. I am particularly interested on the way it should be shaped.
Kindly advise and oblige.
Regards,
TariqFine, I get your point, I am partocularly keen to know about the following issues:
1. The validity dates for the org model. How and when should it be used. Every time I view it, I see it as valide from the current date to 3 month.
2. The principle to be followed in its creation should be what? I understand it as:
a. The sales org unit should be at par with my Sales Org and / or a sales office -- i dont find the
division being mentioned....Am I mistaken anywhere? (The division is made as "active")
b. The position, as in General manager / Manager, forms below the sales org unit. If I have to
maintain two positions for one org unit. Position wise they are GM's but pertain to two different
grouping e.g. sales division. How would I go about it? Creating two different positions, say GM_1
and GM_2 where the suffixes 1 and 2 denote the different divisions or is there any other way out.
3. I understand I can maintain several 'versions' of the org, model. If I can have a few tips on this too.
For the moment this could quench my thirst for info on the org model. Rest later as I 'digest' more..!!
Thanks in advance. -
Org Modeler 3.0 : Hierarchies - how to turn off employee listing
Hi,
I'm in Org Modeler 3.0
In Source Org Chart -> Hierarchies -> Org Structure, there are 2 position and employee. We only want to show Org Unit and Position in the View, thus, we need to turn off Employee. However, there is no enable / disable button. Does anyone know to turn it off?
(In Org Chart 3.0, Employee is placed under a different hierarchy, so I can easily disable it. But I can't do the same in Org Modeler).
Thanks.Hi there,
Your post is a bit confusing because you mention listing in the subject (which can be disabled in the AdminConsole) but your post is referring to the Employee hierarchy of the Organization Structure orgchart.
You'll need to disable this directly in the XML file for the SAPOrgUnitOrgChart orgchartconfiguration object. Copy a version to your .delta folder and open it for editing. In the hierarchies section comment out or delete the <hierarchy>SAPEmployeeHierarchy</hierarchy> declaration. Then go through the rest of the configuration file and remove/comment out any object references to the SAPEmployeeHierarchy.
Good luck!
Luke -
Replication of HR Org model from ECC to C4C
Hi,
Just wanted to know whether we can replicate HR Org models in ECC system to C4C.
Regards,
SubhasishHi Subhasish,
If you have access to C4C then you can Go to go to the Business Configuration work centre and choose the Implementation Projects view. Select your implementation project and click Open Activity List.
Select the Fine-Tune phase, then select the Perform Organizational Structure Setup activity from the activity list.
here you can choose option 1. Manual setup of Org structure or 2. Import Org structure using migration template
Since you need to migrate you can fill in XML sheet with legacy data and upload into C4C
Regards,
Surjeet Bhati -
Changing The Validity Dates In Org Model in CRM- User Level
Hi
How can we restrict the Validity Dates in Organisation Structure at User Level.
I need that the user should be given some specific dates<b> ( Valid till or assigned till )</b> while assigning in the org. And it should be visible always in the Org Model.
We tried using Delimited Date Function, but the User gets ellapsed if the Validity is expired.With the business point of view, <b>the requirement is that all user should be listed in Org model with respect to any dates.this would mean that if a user is terminated we would want to change the Valid till date in the Org</b>Hi Amrita,
Business partner number and Object ID is automatically determines by system when creating a org unit.
I dont find any configuration to create org unit with your own BP number and object ID. You have option to make repairs to the existing org unit.
Please find the below path to repair the org unit
IMG -> CRM -> Master Data -> Business partner -> Integration Business partner -Org management -> Create Business partner initially
Select the org unit and execute to get all the org units.
You can select the org units with errors /warnings and click on start repair to get automatic assignment of BP.
Hope it helps
Reward points if it helps
Regards,
Madhu -
Org Modeler 3.0 : Silo is empty
Hi,
I'm in Org Modeler 3.0
In position details panel, under the structure tab, there is Silo. In my setup, the Silo is empty. However, if I go to Actions->View Profile, the Silo works perfectly.
Has anyone seen this problem?
Thanks.Hi Stephen,
Here's the log file, maybe it means something to you? It is pretty long, I'll have to seperate it to different replies. Thanks.
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - Tenant ID: 000
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - LoginSettingsObject Load: 16
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Credential provider Anonymous
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User to authenticate d66942c7-1386-4837-a454-742c8619c3cc
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication provider Anonymous
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User authenticated d66942c7-1386-4837-a454-742c8619c3cc
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication row is null
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User population provider is Anonymous
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User populated
06 Jan 2011 15:42:07 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Login process finished successfully
06 Jan 2011 15:42:08 INFO com.nakisa.Logger - Invoking action:refresh []. For processor ModuleControlAppProcessor. Against controller ModuleControlCtr
06 Jan 2011 15:42:08 INFO com.nakisa.Logger - refresh on ModuleControlAppProcessor took: 5ms
06 Jan 2011 15:42:09 WARN com.nakisa.Logger - class com.nakisa.troll.web.ResourceServlet : processRequest : Image 'E:\usr\sap\NKQ\J00\j2ee\cluster\apps\Nakisa\OrgModeler\servlet_jsp\OrgModeler\root\images\ordos\scenariotocicon.png' doesnt exist.
06 Jan 2011 15:42:11 INFO com.nakisa.Logger - Invoking action:refresh []. For processor ModuleControlAppProcessor. Against controller ModuleControlCtr
06 Jan 2011 15:42:11 INFO com.nakisa.Logger - refresh on ModuleControlAppProcessor took: 9ms
06 Jan 2011 15:42:11 INFO com.nakisa.Logger - Invoking action:loadscenario []. For processor ModuleControlAppProcessor. Against controller ModuleControlCtr
06 Jan 2011 15:42:11 INFO com.nakisa.Logger - loadscenario on ModuleControlAppProcessor took: 3ms
06 Jan 2011 15:42:12 INFO com.nakisa.Logger - Invoking action:initialize []. For processor ScenarioAppProcessor. Against controller ScenarioCtr
06 Jan 2011 15:42:12 WARN com.nakisa.Logger - DB2Version8CommandProcessor.getWhereClause() : Unable to parse Where Clause so unparsed Where Clause will be used as is
06 Jan 2011 15:42:12 INFO com.nakisa.Logger - initialize on ScenarioAppProcessor took: 285ms
06 Jan 2011 15:42:19 WARN com.nakisa.Logger - class com.nakisa.troll.web.ResourceServlet : processRequest : Image 'E:\usr\sap\NKQ\J00\j2ee\cluster\apps\Nakisa\OrgModeler\servlet_jsp\OrgModeler\root\images\ordos\scenariotocicon.png' doesnt exist.
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - Invoking action:refresh []. For processor ModuleControlAppProcessor. Against controller ModuleControlCtr
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - refresh on ModuleControlAppProcessor took: 10ms
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - Invoking action:loadorgchart []. For processor ModuleControlAppProcessor. Against controller ModuleControlCtr
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - loadorgchart on ModuleControlAppProcessor took: 34ms
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - Invoking action:refresh []. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 26ms
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 18ms
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 17ms
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
06 Jan 2011 15:42:23 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1 -
Org model/structure, territory management:
Hi All,
Can some one tell breifly about Org model/structure, territory management & how tomaintain them?.
Thanks, Sudeep..Hi Sudeep,
Organizational Management allows you to set up your companyu2018s organizational structure.
You can use this flexible tool to maintain the company structure, including the positions and employees in an application, and assign specific attributes to the organizational units. Organizational Management allows you to specify organizational data automatically in a business transaction using the organizational structure. It can also be used to determine business partners; for example, you can find the employee responsible for a business transaction.
You can further Select Determination of Data for Organization as per the following
Determination of Org Model via Organization Rule:
Determination of Org Model via responsibility
<Wizards to Create the Orgainsation Determination are available for Ease Creation of Determination Rule>
Teritorry Management
Territory Management enables you to structure and organize your sales market by dividing it into territories according to criteria of your choice (such as size, distance, revenue, products, number of visits). The organizational model reflects the internal view of your organization. The territory hierarchy reflects the market view. Changes to the territory hierarchy usually occur more frequently than changes to the organizational model. The customer base can increase or decrease and territories must be resized or reallocated to accommodate this, to ensure that a sales representative has the appropriate workload.
Territory Management enables you to structure and organize your sales market by dividing it into territories according to criteria of your choice (such as size, distance, revenue, products, number of visits). These territories are structured in a territory hierarchy.
In Territory Hierarchy you can Classify Territories as per your Requirements
For Further Details you can Refer to Link
http://sapcrm.blog.co.in/
Also Please Refer CR 100 and CR 300 for Detailed Description of the Same
Thanks and Regards,
RK -
BADI in Org model determination..
Hey Gurus..
We determine the org model(service org,service team , etc) by the zipcode of the sold to.User just needs to enter sold-to.
I am in pocess of understanding the configurations done in the system in order to implement this.
I would like to know the way to determine which BADI is trigerring for this org determination.
ThanksHi,
Its not a BADI which is triggering the determination. It is function module which is attached in the rule definition. U can view the rule definition in Tcode: PFAC.
This Rule is inturn attached to the org profile.
If u wish to change the determination, all u need to do is decide on the parameter to be passed, and change the logic accordingly in the function module.
There is one BADI also available CRM_ORGMAN_BADI and its method
CRM_ORGMAN_DETERM_INITIAL may be of some help.
Regards,
Shalini Chauhan -
hi experts,
we have done the initial download of org model from ECC 5.0 to CRM 5.0.
now we need to understand that is there a delta download available on the org model. if we do any changes in org model in either of the systems will it automatically get reflected into other system?
any specific settings/ configurations to be done to enable org model delta download?
please let us know your views at the earliest.
thanks in advance
RHThis subject is a bit obscure. At least in CRM 4.0 the organizational unit upload (spro activity) worked very poorly, and I had to manually correct a lot of units.
Now that I thought about it better, the ALE distribution only works corretly between CRM landscape levels, not ECC and CRM since sales organizations are not necessaritly Org Units in ECC HR.
The conclusion is ....no delta available I believe. -
Adding new data elements to Org Modeler.
We are trying to add 4 fields to the org Modeler. However it is nowhere to be found like in the orgchart.
Org Modeler 3.0 SP2
PA0001, PA0008, HRP1005 and HRP1008. (also linking to the texts in T001P, so we will require a table inner join)Hi Wade,
In order to get the fields in OrgModeler scenarios you need to make sure that your hierarchy data element in the Source OrgChart contains all fields that you want. For this I recommend creating a NakisaRFC function for the additional data, creating a data element for it and then creating a linked data element to link together the new data element and the existing hierarchy data element. There is no data center in OrgModeler so you will need to do this manually.
Best regards,
Luke -
Re: [SunONE-JATO] Re: How to use a tiled view without a model
I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jspCraig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
How to add an index to a materialized view in Data Modeler 3.3
Hello everyone,
I'm looking for a how-to to add an index to a materialized view in Data Modeler 3.3.0.747, as I coudn't find a way to do it so far.
I looked here:
Relational Model
Physical Model
Oracle 11g
Materialized Views
"my_mv_name"
"INDEXES" IS NOT HERE IN THE TREE
"Tables" does not include it either
Thank you & Best regards,
BlamaHi David,
thanks a lot. I did so and it worked, but I found a minor bug while doing so:
I marked the table as "Implement as Materialized View" and went to File->Export->DDL (for Oracle 11g).
The generated code (I checked all options in "Drop Selection") includes a row:
DROP MATERIALIZED VIEW mv_mymatview CASCADE CONSTRAINTS ;
which produces a syntax error.
Best regards,
Blama -
Missing Business Attributes in Org Model
Hi,
I am working on CRM 5.0 system...In the process of creating Master data... I have created an Org model under that created some Org units.....
In any Org unit of any Org model > under the business attributes tab..... I am not able to see the entries for Division, Distribution Channel, Tupel and some other...
And also I could not see any values for division and distribution channel under BP>Sold to Party Role>Sales Area Data.....
Could anyone tell me what would be the reason.....
Thank you very much for your help in advance....Dear Sr,
I hope I got your question right.
I guess the attribute entries (Division, distribution channel, tupel etc) are invisible in your system. You may check the following:
Use t.code <b> OOATTRCUST </b>
In the screen that opens select your scenario for which you cant see these entries. i.e. sales, marketing , service etc.
And then double click on the attributes/ scenarios folder from the left hand frame.
You will now see a large list of attributes. See if your attributes (Division, distribution channel, tupel etc) are made invisible becos of the check box invisible being ticked besides each of them.
If so, uncheck it. You should now see the entries.
Julius -
Mapping SAP CRM Org model to ecc Enterprise structure
Hi
SAP gurus,
I am looking for some step wise guideline for conversation of SAP CRM org model to sap ecc, I want to do the mapping. Can any one please help for required steps.
and one more thing is I tried to do this by "Convert Org. Model to Represent Multiple Assignments in SAP ECC" option in crm 5.0 but i failed, some error happened, so how can I revert back to crm org model.??
Please help, I really need this.
Thanks
Rahul{I am looking for some step wise guideline for conversation of SAP CRM org model to sap ecc, I want to do the mapping}
I think it's not possible
{so how can I revert back to crm org model.}
Not. Please read documentation.
Maybe you are looking for
-
How do I install purchased software without a disk drive?
We recently bought Elements 12 + Premiere Elements 12 with the intention of buying a new computer. But now our new iMac doesn't have a disk drive. How do I install the software? On the site I only see options for trial versions or to buy the products
-
Deleting Original Pictures Question?
I just started using iPhoto. Prior to that I had all my pictures organized in folders by event. I imported all my pictures in iPhoto and almost everything was correct. For about 500 photos they dates we wrong causing the events to be out of order. I
-
Upgrade 9.2.0.8 32bit se to 9.2.0.8 64 ee
HI All, I would like to ask if it is possible to upgrade 9.2.0.8 32 bit se to 9.2.0.8 64 ee. If yes, what are the steps to do it?
-
Subsequent searches of PDFs hang
I just noticed that when I use iBooks to search for text within PDF documents, the first search works successfully, but subsequent searches seem to hang (i.e., they take longer than I am willing to wait). This is on my 1st gen iPad running the lates
-
Can this UI rendering can be created in DynPro?
Hello, I would like to create the following UI: A table which will contain X Rows. Each row has a title and a liitle triangle at it's side. Pressing this triangle will open Y Rows, pressing the triangle again will hide these rows and show the title a