VIEW OF STRUCTURE

How in the easiest way write a procedure which will create the view of subtree looking from a given node of the tree? I mean, I need to have a view of a tree where given node is the root , and this tree is part of thr bigger one.
Thanks for any hints or sample code.

i think you will need Oracle Connect By<a>

Similar Messages

  • Tcode to view/change Structures

    Hi,
    I need to add new fields to VA05. OSS Note 350068 intructs to change Table VBMTV.  However, the system generates error message "VBMTV is a structure, not a table" when I tried viewing from SE16.
    What is the tcode to view change Structures?
    Thanks!

    VBMTV is a structure and not a table. In SE11 select radio button Data type and enter VBMTV in corresponding fields and click on display to view the contents of the structure.
    Regards,
    GSL.

  • View table structure

    Hi,
    Is there in other way or command to view table structure.Like to view tables,constraints on same etc..
    Thanks,

    why not
    desc emp
    I agree the OP hasn't spent as much time formulating their question as they expect us to spend on answering it, but it seems clear to me that they want a single command which lists everything - not just columns but constraints and indexes too.
    To which the short answer is, 'cannot be done'.
    The slightly longer answer expands to include references to IDEs such as SQL Developer or TOAD which offer us tabbed information sheets on our database objects, and so provide an easier way of seeing this information than running half-a-dozen queries against the data dictionary.
    Cheers, APC
    blog: http://radiofreetooting.blogspot,com

  • Viewing chemical structure stored as a SMILES string

    Hello,
    I am testing a trial version of Crystal Reports to create reports from our Oracle database which we use to store chemical information. I have had success except for being able to view chemical structures that are stored in the database in SMILES format. I want to see the actual structure in the report. Right now, it just shows a blank box. Does Crystal Reports have a way of doing this?
    Thank you.

    Hi Paige,
    I've never seen or heard of anyone every asking about that field type so I did a little searching and found this link:
    http://www.dalkescientific.com/writings/NBN/chemical_dbs.html
    I doubt we support that field type but try creating a Command Object, connect to the DB and then select Add Command and type in SQL that should return that field and then drop the field into the report and see if it shows any thing.
    If not the only thing I can think of is if it's possible to create a stored Procedure and convert the data into text formats as a work around.
    If you could explain what you shoudl see as an example and how to insert the data into and oracle field I can post this to the PM and R&D group to see if it's something we could add into our data type support.
    Thank you
    Don

  • Need a tool to view jsp structure

              Hi *.*
              I have got a package of jsp files with JavaBeans. The relationship between each
              jsps is not documented.
              Therefore, I need a tool that is able to creat the structure of the JSPs. Most
              important for me is to know,
              which beans are used in a certain jsp, which JSPs are referenced from a certain
              jsp (the linking of JSPs).
              Please mailto: [email protected]
              TIA
              Sky
              

    If you are using iStumbler to identify sources of potential wireless interference, keep in mind that the utility will not display any "closed" or "hidden" networks around you.
    So, if iStumber displays 6 networks, for example, there are probably going to be a few more lurking around you that iStumber cannot "see".
    And, the devices that cause the most problems for wireless networks....cordless phones...of course are not displayed in the iStumbler window.

  • How to view the structure details

    Hi,
    In some of the fields, we can see only structures instead of tables.
    How to find out the data for this fields?
    Normally, for table we will goto SE16 and enter the table name and will get it after executing.
    Similarly, How to do this for structures?
    Regards,
    Mohd Ali.M.A

    Hi,
    I need to check for some fileds which i am doing the operational closures and all frequently.
    Could you please let me know the way to find out?
    Thanks in Advance,
    Regards,
    Mohd Ali.M.A

  • Determining what views are created for certain structure

    Hi!
    I need to create some views to structure in Development system as it is done in Production system already. It is something like manual transfer of structure and it's views from Production to Developement system (special case).
    My question is this: how to determine what views are created for certain structure?
    Will reward,
    Mindaugas

    Use 'Where-used' list for that structure.
    Go to SE11.
    Enter the structure name.
    click on the Where-used list button in the toolbar.
    Select the applicable options. (In your case 'Views')

  • Invalid extract structure template && of DataSource &&

    Hi,
    While creating a z datasource i have received the above error. Fom the previous threads here (and from notes 202162 & 335342) I can understand that when there are Currency or Quantity fields included in the datasource, their key fields (CUKY for currency and UNIT for Quantity) shoul also be included in the same view and structure.
    In this case I am taking data in the view from table EKBE. I need to have MENGE & DMBTR. For this I am also taking fields LSMEH (Datatype - Unit) and WAERS (Datatype - CUKY) respectively. Yet the error is coming.
    If i try to join EKPO table in the view then this error does not come as I give EKPO-MEINS as ref table and ref field for MENGE. This thing works even if datatype of EKPO-MEINS is also UNIT Datatype. BUt I can not use join on EKPO table as while extracting the data in RSA3 it is giving me data from both tables (which is not the requirement)
    Plz help.

    Hi,
    Try giving EKPO-MEINS as ref table and ref field for MENGE. without joining EKPO.
    Hope it helps
    Regards,
    Rathy

  • User Exit EXIT_SAPLMGMU_001 doesn't work with all MM views

    Hello,
    I'm using user exit EXIT_SAPLMGMU_001 in MM02/MM01 tcode to check if valuation class is correctly filled and i've a problem when i select all views for material. In MM02, when i select Accounting View, i can make the validation because in user exit, structure wmbew is filled, but if i select all views, only structure wmara is filled, all others structure are empty.
    does anyone can help me in this?
    Thanks

    HI
    CHECK WITH THESE USER EXITS
    MGA00001 Material Master (Industry): Checks and Enhancements
    MGA00002 Material Master (Industry): Number Assignment
    MGA00003 Material Master (Industry and Retail): Number Display
    Hope this helps !!!
    Cheers
    Alfred

  • Directory structure on Win/MSS

    Hello,
    It is a conceptual doubt, not an error.
    We have several Dialog instances (on separate boxes) for our Production system running R/3 4.7 on Win server 2003 + MS SQL 8.00.2040
    I noticed that directory structure of Dialog hosts don't have SYS directory under D:\usr\sap\<SID>.
    Hence the profile directory \usr\sap\<SID>\SYS\profile is only present in Central instance host. It doesn't seem to be mounted on any Dialog instance host.
    Q: How does any Dialog instance, in this case, reads the Start & Instance profiles during startup?
    - Roshan

    Hi Sekhar,
    What you say is correct.
    My question is specific to Windows OS, where I am not able to see (on DI's) any sapmnt or any mapping to the global share.
    There must definitely be some mapping but somehow its not visible.
    E.g.
    In a DI host running on UNIX you can view directory structure like below, which clearly shows SYS dir
    [user@host ~]$ cd /usr/sap/PD1/
    [user@host PD1]$ ll
    total 28
    drwxr-xr-x 8 pd1adm sapsys  4096 Oct 13 08:29 D03
    drwx------ 2 root   root   16384 Oct  8 16:30 lost+found
    drwxrwx--- 4 pd1adm sapsys  4096 Nov  3 04:33 out
    drwxr-xr-x 5 pd1adm sapsys  4096 Oct 13 08:26 SYS
    But windows doesn't show the SYS dir. by default. Why?
    By which method/route is sapmnt being accessed in Windows environment?
    >
    > may be you can refer below URL for more informative.
    >
    > http://help.sap.com/saphelp_nwmobile71/helpdata/en/0a/0a2e36ef6211d3a6510000e835363f/content.htm
    > http://help.sap.com/SAPHELP_NW70EHP1/helpdata/EN/20/f8e36764b1e049beee648a987e4315/content.htm
    PS: please check below link for a detailed directory structure of SAP running on Unix -
    http://bit.ly/4TqUTQ
    BR,
    Roshan

  • Successfully imported json bookmarks file into FF19, and library view shows folders correctly, but Sidebar view shows no folders and so loses my organization.

    Longtime FF user. Still on 3.6.28 mostly, due to my need for my large collection of hierarchically organized bookmarks. I have 2000+.
    Trying FF 19 today.
    Successfully imported the json file from other system.
    Via the Bookmarks menu, Show All reaches Library view and everything is there. Except for the fact that this FF design will not let me see the contents of more than one folder at one time. Which is why I've stayed with 3.6.28.
    Now, a friend has shown me that I can see multiple folders AND the contents of multiple folders using Sidebar Bookmarks, just as I wish. Great! But after importing my bookmarks, all I see is a random list of bookmarks in the Sidebar view. There are no folders or subfolders so with this view I lose all the organizational structure I see in the Library.
    Am I missing something? Is there a way (an addon) that would put everything in the Library Right Pane? instead of just one folder? That would be fine.
    OR
    Is there a way to preserve the organization of my bookmarks after importing them, in the Sidebar view? That would also be fine.
    Thanks for any helpful answers. Otherwise, back to 3.6.28 I go.

    In the Library view, everything functions as Mozilla would have it. Yes, individual bookmarks are not to be seen, except in the right side pane. And only from one folder at a time. Returning to the beginning, that was my complaint with Show All Bookmarks and why I've stuck with 3.6.28 coupled with Old Manage Bookmarks.
    And that's why I asked if anyone is aware of an addon to make the contents of more than one folder visible in the right hand pane of the Library view in FF 4 and up. I've even tried Mike S's "hack" of OMB to see if I could make "Organize Bookmarks" return on FF19. No luck.
    So Library View works as it "should". But that's insufficient for my needs.
    You've indicated that Sidebar view SHOULD function as I wish. But so far, barring a fix, I don't see folders, subfolders nor individual bookmarks ''in the order'' that they started in, from PC1. I don't know why that failed. I'm happy to keep trying things, til the moon turns green.
    Proceeding along -- sort Library? Yes, sorting works. But since the Library is functioning, unsorted is my preference. To make the Library View FULLY ADEQUATE though, I'd want to see bookmarks in different folders viewable at one time. What I need is the Sidebar view with all the folders showing, replicating the Library's View hierarchical structure.
    HTML export and import? I'm sure I can import one into FF19. But I don't know how to export them from PC1 as my bookmarks are in .json format. When I try to do that, the dialog window confines me to selecting an HTML file, and so I can't export the .json file I have. I'm sure there's an easy answer, but its not intuitive.
    Thx
    P

  • JMS Adapter - data conversion xml- structured data has extra characters

    Further to [Using MQ / JMS adapter with legacy system to talk to SAP;, I am using the Module tab on my receiver JMS Adapter to convert the xml payload to a structured format. It converts to the mainframe ebcdic code set.  I am on PI 7.11, and the MQ Series (which JMS interacts with) is 6.0.  The code I have is comparable to the wiki:[http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter], i.e. the example at the very bottom of that article.
    The issue we are having is that an extra character gets inserted at the end of each structure (within the message), i.e. our message contains 4 structures, but when we view the structured data on our mainframe system (that arrives from PI), the entire message is shifted by 4 characters... by 1 after the end of each structure.  On the mainframe, this extra character appears as '.'. It must be an end-of-line or something...
    Has anyone had the same issue?  If so, were you able to resolve? I could probably set up my message data type to just be one big declare (thus eliminating the use of structures within it), but that is something I'd rather not do.
    We are in the process of reviewing Note 856346, #6 but not sure if it applies.
    Regards,
    Keith

    Hi,
    check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
    this is not CallJMSService.
    And also check the receiver Structure, if it is falt structure its ok, else
    see the below link if it has the complex structure , how to handle..
    See the below links
    /people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
    /people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
    content conversion
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Regards
    Chilla..

  • JDeveloper 10.1.3.2.0 - How to see content of showDetailItem in Design View

    Hello,
    I am new to use the JDeveloper to create JSF Applications and I learn with the tutorials.
    So I have a question:
    I want to find out: How to see the content of the second or third showOneTab component in the WYSIWYG Design View of a page.jspx?
    For example, I am orientating the tutorial: "Introduction to ADF Faces/Trinidad Using JDeveloper" (http://www.oracle.com/technology/obe/obe1013jdev/10131/trinidad/adf_faces_trinidad.htm)
    Page: table.jspx
    There is the showOneTab "Single Row Select" and "Multi Row Select" and I see only the content of "Single Row Select".
    How can I see the content the table2 of "Multi Row Select".
    I have created the table of "Single Row Select" and can see only this one.
    The download of that example show me in the View of structur the component table2, but not in DesignView.
    Can you help me?
    best regards
    Joachim

    Hello Frank,
    many thanks for your answer. It try it and it works!
    For completion, I think the argument "disclosed" of the component "af:ShowDetailItem" with "default" setting is "false".
    So if I will editing one tab in WYSIWYG editor, I set only this tab disclosed = true.
    All others to "false". When my edit is completed, I set only the first tab to "true" and all other "false", because I want to start with the first tab by first request.
    I look again into the "help". Hopefull in answer:
    Which effect has this argument by deployment?
    There is only the desciption: "whether or not to disclose the children This attribute is not supported on the following agent types: pda, phone, voice."
    I think this is for me irrelevant. My application have to support only a client like a personal computer.
    Which effect has this argument by deployment?
    Or is this only for the WYSIWYG editor?
    Joachim

  • Idoc structure not displying in XPATH at Receiver Determination..!!! Urgent

    Hi All,
    Doing Idoc to File Scenerio,
    In the receiver determination, I need to select the XPATH from the Idoc structure and by based on the GLN number which is coming in one of the segment, I need to pass to different receivers.
    Problem here is Iam not able to see the Idoc structure in the  XPATH to provide the condition.
    But when doing File to Idoc scenarios, Iam able to see the File structure.
    Any idea why IDoc structure is not displaying over here??
    Its a bit urgent for me..
    Waiting for your replys.
    Thanks&Regards
    Seema.

    Hi,
    This will help you now
    Hi,
    If you get the following msg while selecting the BS in Receiver Determination and if you are unable to view the Structure of the Source
    "Message interface does not exist in any software components installed on this business system"
    1) Open ID-----Double click on Business system that which u are using in the scenario
    2) Check whether you are able to see the SWC in the Othere attributes TAB
    3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
    4) Click on Installed Products TAB
    5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
    6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
    7) Click on Installed products and Check the check box of your Product and then finally save that.
    Now you should be able to see the SWC in the Othere attributes TAB in ID
    Regards
    Seshagiri

  • Maintenance view of two tables

    I need to update two tables Header and Item with the hepl of maintenance view.There structure is as follows :
    Header - GRPKEY (Pr. Key)
                  Printchk
    Items :- GRPKEY ( Foreign key - check table Header-GRPKEY)
                fieldname ( Key)
               descr type char255
    Now i am creating maintenance view using header as base table. In this case its not showing fields of items in View fields tab and i can't have those fields for data entry.
    If i use items table as base table when i create data through this view header table doesn't get updated.
    Please suggest.
    Thanks

    Hi,
    My real question is, Will a maintenance view really enables me to enter data into two tables simultaneously?
    OR
    Is it just one table that I can enter data into and the fields from other table will appear based on the join condition?
    All SAP documentations talk about entering data into multiple tables using a maintenance view. But it was not practically possible for me when I tried.
    Regards,
    Mahesh

Maybe you are looking for