View option in bi publisher 11g

Hey,
There is a bi publisher report embedded in obiee dashboard page.There are several view options in the report.When we try to view the report as excel or rtf it gives a pop up to either open or save.It acts more or less same as Export to Excel/rtf option.
Is there any option to make them viewable in the same window .Is this a tool limitation?.
Kindly reply if you faced the same issue
Regards,
Ishwarya.

as far as i know
in 11g from 11.1.1.6 you can hide the entire parameter section not the single parameters which needed check this link
http://docs.oracle.com/cd/E25178_01/bi.1111/e22257/whatsnew.htm#CHDCDBCA
New report viewer action button to show or hide parameters
This release adds an action button to the report viewer to enable users to hide or show the parameter region. This enhancement complements the new parameter display options. When report parameters are configured to display as a dialog or in a separate full page, the parameter display region is dismissed when the viewer displays the report. Use the Parameters button to redisplay the parameter region to make new selections.

Similar Messages

  • Optional parameters Bi Publisher 11g

    Hello friends, I have a problem with a report, the report has four parameters that must be filled compulsorily without any vacuum, as if I was not some empty parameter gets as no results.
    My question is:
    I can get the result inputting values only in some of the parameters, not necessarily in the four parameters and they still generate the result?
    this is the query...
    SELECT
                    "F42119". "SDLITM" as "Code1"
                    "F42119". "SDAITM" as "Code2"
                    "F42119". "SDDSC1" as "Product"
                    "F42119". "SDMCU" as "Bodega"
                    Sum ("F42119". "SDSOQS" / 10000) as "Number",
                    Sum ("F42119". "SDUPRC" / 10000) as "preciou"
                    Sum ("F42119". "SDAEXP" / 100) as "Value",
                    Sum ("F42119". "SDUNCS" / 10000) as "CostoU"
                    Sum ("F42119". "SDECST" / 100) as "Cost"
                    "F4101". "IMSRP1" as "Division"
                    "F4101". "IMSRP2" as "classification",
                    "F4101". "IMSRP8" as "Brand"
                    "F4101". "IMSRP9" as "Aroma"
                    "F4101". "IMSRP0" as "Presentation"
                    "F42119". "SDDOC" as "Type",
                    "F42119". "SDDCT" as "Document",
                    "F42119". "SDUOM" as "Unit"
                    "F42119". "SDCRCD" as "currency"
                    "F0101". "ABAN8" as "ABAN8"
                    "F0101". "ABALPH" as "Customer"
                    "F0006". "MCRP22" as "Establishment"
    from          "PRODDTA". "F0101" "F0101"
                    "PRODDTA". "F42119" "F42119"
                    "PRODDTA". "F4101" "F4101"
                    "PRODDTA". "F0006" "F0006"
    where       "F42119". "SDAN8" = "F0101". "ABAN8"
      and         "F0006". "MCMCU" = "F42119". "SDMCU"
      and         "F4101". "IMITM" = "F42119". "SDITM"
      and         "F42119". "SDDCT" in ('RI', 'RM', 'RN')
      and         CAST (EXTRACT (MONTH FROM TO_DATE (substr ((to_date ('01-01-'| | to_char (round (1900 + (CAST ("F42119". "SDDGL" as int) / 1000))),' DD- MM-                YYYY ') + substr (to_char (CAST ("F42119". "SDDGL" as int)), 4,3) -1), 1,10))) AS INT) in : Month
    and          CAST (EXTRACT (YEAR FROM TO_DATE (substr ((to_date ('01-01-'| | to_char (round (1900 + (CAST ("F42119". "SDDGL" as int) / 1000))),' DD- MM-                YYYY ')+ Substr (to_char (CAST ("F42119". "SDDGL" as int)), 4,3) -1), 1,10))) AS INT) in: Year
    and          trim ("F0006". "MCRP22") =: Establishment
    and          trim ("F4101". "IMSRP1") =: Division
    Group By    "F42119". "SDLITM"
                    "F42119". "SDAITM"
                    "F42119". "SDDSC1"
                    "F4101". "IMSRP1"
                    "F42119". "SDDOC"
                    "F42119". "SDDCT"
                    "F42119". "SDUOM"
                    "F42119". "SDCRCD"
                    "F0101". "ABAN8"
                    "F0101". "ABALPH"
                    "F4101". "IMSRP2"
                    "F4101". "IMSRP8"
                    "F4101". "IMSRP9"
                    "F4101". "IMSRP0"
                    "F42119". "SDMCU"
                    "F0006". "MCRP22"
    How I do it?
    Appreciate the help...
    Edited by: YeisonSoto on 11/04/2013 01:14 PM

    Now I have to do a search for customers
    I do like this:
    from   "PRODDTA". "F0101" "F0101"
    where  REGEXP_LIKE (TRIM (ABALPH), TRIM (UPPER (: Name1)))
    and    REGEXP_LIKE (TRIM (ABALPH), TRIM (UPPER (: name2)))THE full name appears in a single field
    "CARLOS ALBERTO LOPEZ RUIZ"
    Example when I want to look for "CARLOS ALBERTO LOPEZ RUIZ"
    I enter :Name1 = CARLOS :Name2 = LOPEZ
    but I am bound to input values for both parameters in text format
    because if you leave one of the two empty fields does not produce a result.
    I think it is because it takes the value empty
    I would like to type a value to one of the two parameters and do the search, leaving the other empty parameter
    Any idea?

  • Not able to view any report in BI Publisher 11g

    Hello All
    I have installed BI Publisher 11g in Intel Solaris 10. I started of from the scratch, created a Data Model, then created a Report. but now I am not able to view the report. Upon clicking the report name or Open it logs me out.
    I am logged in as user, weblogic the default user created while installation.
    Please help
    Ash

    Hi Rony,
    You may have created the report initially with Web Layout only - therefore there will no paper layout.
    To 'get' the paper layout back, select your Report module name from the Builder and then select Tools-->Report Wizard. Select 'Create both web and Paper Layout' and then go through the various wizard steps.
    Best of Luck.
    Regards,
    John

  • Problem printing Report with Image in BI Publisher 11g

    I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
    When I tried printing PDF in output I get
    Type /Xobject
    subtype /Image
    Filter /DTDDecode .......
    When I tried printing HTML output I get
    Type /Xobject
    <html...
    ....>
    When I tried printing RTF I get
    { \fontb1 }
    { \f0 Arial;}
    { \f1 Times:}
    I think I am missing some BI publisher configuration. Can you help me in this regard.
    Thanks,
    Santosh
    Edited by: user4956795 on Jan 16, 2012 2:08 PM
    Edited by: user4956795 on Jan 16, 2012 2:18 PM

    Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
    Per the BI Publisher guide,
    Following are recommended guidelines for building data models:
    Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
    You should only use multiquery data models in the following scenarios:
    To perform functions that the query type, such as a SQL query, does not support directly.
    To support complex views (for example, distributed queries or GROUP BY queries).
    To simulate a view when you do not have or want to use a view.
    Thanks,
    Bipuser

  • Year/Annual planning/view option in iCal

    I would like to find a way to print a Year/Annual planning/view option in iCal, but I could not figure out a way to do it.
    Does anybody knows how to do do it?
    If it is not possible, can anyone recommend a script/plugin to achieve it? Or another software that can import iCal calendars and then print Year/Annual planning/view?
    Thanks,
    Anselmo

    Me too! Please please someone reply to this request! This is a vital option that needs to be made available as a view AND print option.
    Some small improvements to the print dialogo window would also be appreciated:
    I think it would be more efficient if the calendars/subscriptions to print were all OFF by default: I would imagine it is more often the times you are printing a selected calendar, rather than all of them together.
    The frame containing the calendars also needs to be expandable making them all visible at a glance. Scrolling through lists in a dialog is a no-no (or for Windoze).
    Thanks for any help on this.

  • How can I turn on the Compatibility View Option?

    In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
    The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
    Would someone direct me to the section where I can turn on the Compatibility View Option?
    Thank you!

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do you remove a web address from compatibility view option using a script?

    How do you remove a web address from compatibility view option in IE using a script or a GPO? 
    Not seeing any options.
    Casey
    This topic first appeared in the Spiceworks Community

    luckyfromhialeah wrote:
    How do you remove a web site from popular list?
    If you mean from the Safari menubar item "Popular"
    Choose "Show All Bookmarks" from the Bookmark menu in the main menubar, or click the icon for that in Safari's menubar -
    The page that opens should show a list of Bookmarks. In the Left column, click the item under Collections named Bookmarks Bar.
    In the new view, locate the folder named Popular and click the reveal triagle to the left of its name - it will open and reveal all the items listed in Popular.
    Find the one you want to remove, click it once to select it, then press the Delete key on the keyboard.

  • Parameter is not working in HTTP( XML FEED) dataset in bi publisher 11g

    Hi,
    I have used parameter in BI Publisher 10g for HTTP(XML Feed) dataset to have dynamic url which worked by using ${p_url} where p_url is the parameter.
    The same procedure when I use in BI Publisher 11g is not working.It does not consider the parameter ${p_url} and throws the following exception
    *oracle.xdo.dataengine.datasource.plugin.DataAccessException: java.lang.Exception: java.net.MalformedURLException: no protocol: ${p_url}*
    Has anyone faced this issue?
    Please let me know if am doing something incorrect here.
    Thanks &Regards,
    Balaji

    Thanks for your reply.
    In BI Publisher 10 g we are using it this way ${p_url}.
    p_url is the parameter which gives us the entire URL for the XML feed.
    e.g. p_url=http://rss.news.yahoo.com/rss/topstories
    The p_url takes the entire url.
    Please let me know if this can be done the same way in 11g.
    Thanks,
    Balaji

  • BI Publisher 11g Trial dont work fine , send ERROR

    Hi.
    I Install BI PUblisher 11G Trial in a new clean server with :
    + Windows 2008 R2 Foundation Spanish with SP 1
    + Download, Install BI Publisher 11g Trial
    + Execute Demo Report "Revenue Budget Actual and Detail "
    + In Inteactive mode work fine
    + In HTML send ERROR : "java.lang.ArrayIndexOutOfBoundsException: 0"
    + In PDF the pivot table don't display any value higer 1.000.000
    This is a bug ?,how correct this errors ?
    Thank you very much
    Carlos

    Hi Carlos,
    Are you still experiencing this problem?
    I do not see this on my installation on Windows7 64 bit running in English.
    I also set the BI Publisher UI language and Report Locale to Spanish and all three output types:
    Interactive, HTML and PDF render correctly.
    When you say that the pivot table doesn't show any values higher than 1.000.000 ... what does it show instead?
    How do the other sample reports look for you?
    Mike
    Edited by: mdonohue on Jun 5, 2012 4:45 PM

  • Whenever I drag photos from safari to my desktop, it keeps on auto-arranging them. I've tried checking the arrange to none view option but it doesn't seem to work. HELP, PLEASE?

    I just want them to stay exactly where I dragged them on my desktop. Can anyone help me on this. It's starting to get really frustrating.

    Can't find the "sort by" option. I've tried the view options and clicked "none" in arranged by section as I've seen in forums, but still doesn't work.

  • Feature Request - Please allow for a "classic" view option.

    Please allow for a "classic" view option like you have in Mail.  Miss the sidebar that had a list of all the calendars using.  The pop up list is not nearly as functional.  iCal in Lion may be great for touch screen users but is a step back on the intuitive scale for Mac users.
    Also, the delete / revert button are too close to the done button.  Too easy to hit on accident.

    This is a good feature request and should be submitted here: Adobe - Feature Request/Bug Report Form
    The team reviews all the requests that come in through that form. It is a guaranteed way to get your request seen while we do not always see everything that gets posted to the forums.

  • "Open in Smart View" option. Hyperion Planning version 11.1.1.3

    Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
    Your feedback is appreciated.

    I understand you are on 11.1.1.3.
    However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try: 
    When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide. 
    HTH-
    Jasmine.

  • View options in iTunes

    Under view options, I would like to sort albums by year and descending. This 'descending' option was in earlier versions if iTunes. How can we sort the albums where the new content appears on the top of the list?

    Hi,
    In song view you can sort a number of field by either ascending or descending order.
    You can select year, click on heading, this changes to descending order, click again to get ascending.
    Is this what your looking for?
    Jim

  • Is it possible for Apple to add "key" to the view options selection?

    Is it possible for Apple to add "key" to the view options selection?

    DJ1970,  Unfortunately no.  iTunes does not have the key in the database.
    People who want to know the key of a song can use (unless they already have perfect pitch!) key detection software such as Mixmeister. 
    Once you know the key, iTunes does not even have a field to store it, although you could stick it into Comments or some other unused text field such as Grouping.  These fields are indeed viewable in iTunes.

  • Change view options for a single folder

    I use the Finder exclusively in "column view".
    I have a folder that contains some huge (> 1 GB) .tiff files. If I navigate to one of these files, the Finder tries to generate a preview image, but this typically takes more than a minute. I want to turn off the "Show preview column" for this folder (but only for this folder). Under Finder>View>View options I can hide the preview column, but this change applies to my entire file tree. I can't find a way to restrict the change to a single folder.
    Note - if you work in "list view", the view options menu gives you a choice of making changes to "this window only" or "all windows". Not so in column view.

    Probably the best option is to put that folder in list view. When you navigate to the folder containing that folder in your normal Column view, you can hold down the Command key and double click the folder. It will then open in a new window and display in List view. If you use this folder frequently, drag it to the Dock, when you select it from there it will open in List view. I have a number of things that I prefer to open in List or Icon view, rather than my usual Column view, but don't want to clutter up my Dock, so I keep aliases to some of them on my Desktop, and some in my home folder (depending on how often I access them). The ones on the Desktop open in the preferred form with a double click, the ones in my home folder open the way I want with a Command double click.
    Francine
    Francine
    Schwieder

Maybe you are looking for