View photos in thumbnail mode with info visible

Hi,
I am using ipad as a catalog - how do i get to view my pics and their file names at the same time? work uses microsoft/windows...any advice appreciated

You can't in the Photos app itself, though there may be third-party app that allow it.

Similar Messages

Can't view photos in edit mode

Hello,
I just upgraded to iPhoto '08, and while I can view all my thumbnails ok, the photos themselves won't load at all in edit mode.
I was using iPhoto to try to"jumpstart" my iWeb (per my other help request in another topic) when I noticed this.
I have Leopard 10.5.2, iPhoto 7.1.2 and a 1.8 GHz processor and 512 MB RAM in my upgraded G4 tower. I tried deleting the preferences file, rebuilding the library file, opening in another account, etc, with no luck. I had even just erased my hard drive and cleanly re-installed Leopard, etc. with still the same problems in both apps. Do I just need to add more memory perhaps? I can't think of anything else...?Does Leopard require much more memory than Panther (which I had before) to run properly?
Thanks,
Paul

I've had the what sounds like the exact same problem with iPhoto '08. I, too, have an upgraded 1.8 GHz G4 (AGP Graphics) running OS 10.5.3 (although the original installation was 10.5.1 and the same problem occurred before the software updates). When I try to edit a photo, the edit window opens but no picture appears. Clicking on the various editing tools and manipulating them (blindly, on a blank screen) shows that editing is actually taking place, and that changes can be saved.
An earlier post of mine concerned the first problem I noticed since my OS and processor updates; namely, that the DVD player app won't work, but instead returns an error message saying that a valid device could not be found for playback. Several responses to that post seemed to suggest that the ATI Rage 128 video card might be the culprit and that it would need to be replaced. In the past week I've been on the phone or in email contact with tech support people at ATI, Sonnet, Other World Computing, and Apple, the last being the least knowledgeable of all of them, I'm sorry to say.
The Sonnet guy personally runs a computer just like mine, but with the ATI Radeon 9800 Pro Mac video card. That item costs $209 at OWC. But ATI says it won't work because of the G4's 200 power supply.
These folks think that the iPhoto problem would be solved by the new video card -- but I'm not yet convinced I want to spend that kind of money to find out. Most also say that the DVD Player issue would be fixed, although the OWC guy says it has nothing to do with it.
So we're going blind here, with much conflicting expert opinion. I'll keep watching for further discussion.
cc

Trouble viewing photos as thumbnails - iphoto 6

I have iPhoto version 6 and all of a sudden, I can't view my photos as thumbnails - only each picture separately. Does anyone know how I can get back to viewing my photos as thumbnails so that I can select more than 1 photo to add to an album?

Shaiken
Welcome to the Apple Discussions.
At the lower right of the iPhoto Window is a slider. Drag it to the left.
Regards
TD

Can't view photos in Develop mode. Just a blank template (as is the preview template)

Hello community,
I don't know what happened and I certainly can't figure out what to do about this problem. When I open LR 4, I can see all my folders in the Library. When I switch to 'Develop', I still have the strip below and when the mouse hovers over the pic, it shows up in both the preview and main window. BUT, when I move up to the window with the mouse, the pic disappears and the screen goes to the default grey. ALSO, the few times that the picture was in the screen, I would try to make adjustments and nothing would happen. So I NEED HELP!!!! Thanks.
RB

Post screen shots of the Library and Develop module views and you may get some responses.
Things to try in this order:
1) Close out all applications, shut down, and reboot your system.
2) Reset the LR 4 Preferences file and recover catalog:
http://helpx.adobe.com/lightroom/kb/recover-catalog-images-resetting-lightrooms.html
You may want to record your Preferences settings. You can also rename the old preferences file for recovery if this does not help:
com.adobe.Lightroom4.plist.old
Lightroom 4 Preferences.agprefs.old
3) Uninstall LR4.x and reinstall LR4.4.1.

How to random select photos in slideshow mode with iPhoto 7 ?

iPhoto 6 would do random selection of photos during a slideshow. After I installed iPhoto 7, I am unable to find the random key? Do you know if the feature was dropped?
Gary

You need software for it. Do you have iPhoto installed? That is one possibility, but there are many others - you create the slideshow from your photos. Or, you can simply use Quicklook - see here:
http://osxdaily.com/2012/09/06/8-tricks-mac-os-x-full-screen-slideshow/

Why can't I view photos in landscape mode in iOS 7 on iPhone 5???

Some video Apps only portrait as well. Frustrating.

Because that is how iOS 7 does it. To make a suggestion to Apple:
Apple - iPod touch - Feedback

View NEF thumbnails taken with Nikon D600 on my iMac without buying Aperture?

How on Earth can I view NEF/RAW thumbnails taken with Nikon D600 without buying Aperture. My others cameras work fine, I can vuew both my JPEG and NEF now no such luck.

Understand the issue now and came across this thread which I accept may not solve your problem:Apple Raw update brings support for 11 cameras, including D600 and RX100: Digital Photography Review
Although I could open images (D300) in Finder/Preview my issue was I could'nt seem to be able to scroll through the folder so got into the habit of using View NX2. Although that has an email option it does'nt seem to want to email Nefs' due I imagine to file size though I think there are email 'handlers' that will accomodate such file sizes.
According to this thread, Raw support for the D600 is available via the Apps Store but no app info was mentioned: https://discussions.apple.com/thread/4355881?start=0&tstart=0
All else failing, I defer to Shootist's comments which seem to concur with those in the last thread mentioned.
Also came across this thread:http://news.cnet.com/8301-13579_3-57539833-37/apple-adds-raw-support-for-nikon-d 600-other-photokina-models/
Sorry I have not been able to have been of much help

View pics as thumbnails in finder?

Hi i only migrated to mac about less then 2months ago, and im wondering is it possible to view photos as thumbnails when going through folders, as apposed to looking at them through iphoto? Its just that this would make it a lot easier to go through a folder where i have photos, any help please?

If you are using the icon view, going to View > Show View Options and checking "Show Icon Preview" will change the icon to a preview thumbnail, and column view will also show a preview image in the Finder window.

View Photos over Network

I'd like to view photos on an HDTV with good quality at 1920x1080. Can anyone help me implement the following idea?
I have a desktop and laptop both running Vista and PSE 5 and they are connected over a wired network. The HDTV is connected to the laptop as a second monitor. About 15000 photos are on the desktop and cataloged in the Organizer.
I would like to open selected (using tags, collections, etc.) photos on the laptop running PSE using "View Photos in Full Screen" so I can zoom and move around the photos on the HDTV.
Is there a way to have the PSE catalog on the laptop "look" for photos on a mapped network drive that is on the desktop?
Obviously, the procedure cannot alter the catalog on the desktop so I don't lose photos, tags, etc.
I have used a similar, but piecemeal, procedure where I exported, say, all photos in a collection to the laptop. I then showed the photos on the HDTV using "View Photos in Full Screen" and it has better image quality than a slide show plus I am able to zoom, etc. I am not concerned with the "production" qualities, such as music, slide transitions, etc. But I would like to be able to do this for all 15000 photos over my network without copying.
Can you forsee any performance bottlenecks like network speed, laptop RAM/CPU, VGA vs. HDMI connection to the HDTV, etc.
Any ideas?

Hi Jeffree,
does this happen on both computers?
Unfortunately, several posters to these discussions have had that problem and so far I can't find any definite answers or rhyme or reason to it.
You can try rebuilding both the libraries.
You can try just sharing some of the albums instead of the entire library.
I have an iMac with 512 memory and iBook with 640.
They are wirelessly networked with a older NetGear router. I can share just fine with both computers, so I don't think it is a memory problem.
Could it be a signal problem? How far are the computers from each other when sharing?
Lori

Viewing photo thumbnails in an event is there a way to display file info?

Hi,
When viewing photo thumbnails in an open event is there a way to set the program display file info like filename and date under each thumbnail? Right now I have to look at the bottom left info pane and highlite each thumbnail to compare file datesand it's a PAIN.

Nope, I can get these options when I'm in Events, in a specific Event.
I'm not sure if I'm understanding you correctly:
I would like to be able to just open a specific event and have the thumbnail grouping display filename... and not have to scroll through the whole list of Photos.
Do you mean you want a text listing of the pics with no thumbnails?
Regards
TD

Since upgrading to iphoto 11 I,m having difficulty viewing my photos in edit mode. On the quick scan of info mode the photos appear sharp, however in edit mode the edges blur up making it very difficult to edit properly, What is the problem here? I never

Since upgrading to iphoto 11 I,m having difficulty viewing my photos in edit mode. On the quick scan of info mode the photos appear sharp, however in edit mode the edges blur up making it very difficult to edit properly, What is the problem here? I never

Marisa, you stand a better chance of getting an answer concerning iPhoto by posting this question in the iPhoto forum
https://discussions.apple.com/community/ilife/iphoto

Viewing photos imported with camera connector

Hello,
I just purchased a camera connector and was immediatedly able to import photos from my camera with no problems. However, the manual states that I should be able to view the photos by (1) Choosing Photos > Photo Import, and then choose the roll I want to view and (2) Choosing Browse to display my photos.
The problem I'm having is that after I choose my roll it only shows the roll info (11 photos, size 17.3 MB) and options for Delete Roll or Cancel. There is no Browse.
I'm using a 60 GB Video iPod with version 1.2 firmware.
Any help would be appreciated. I've already searched the discussions and didn't see anyone with this exact issue.
Thanks.
MacBook & G4 Quicksilver Mac OS X (10.4.8)

False alarm I guess. I didn't change any settings on the camera or iPod, but now I can browse through the imported pictures. Curious.

How can I view photos I downloaded 2-3 years ago and which suddenly seem to have disappeared. Only photos taken within the past 12 months are visible.

How can I view photos I downloaded 2-3 years ago and which suddenly seem to have disappeared. Only photos taken within the past 12 months are visible.

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto. Version 8.1.2
- What version of the Operating System. OSX 10.9.4
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
When I open iPhoto, only the most recent photos are shown (last 12 months)
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages? This has been going on for several weeks now. There are no error messages, but yes, I had an update in the system (QuarkXPress 10.1), and the problem has occurred from that day.
- What steps have you tried already to solve the issue. I tried to find out where the problem came from, but found no solution.
- Anything unusual about your set up? Or how you use iPhoto? No
Anything else you can think of that might help someone understand the problem you have.
Thank you so much for offering help. I am not a proficient user of the system.

How do i view photos in macbook pro, and while viewing how can i delete the unwanted photos with delete button?

1 My questions are about viewing and managing photos from a folder.
a. How do i view photos in macbook pro - i know the space bar thingy but does not help my purpose?
b. While viewing how can i delete the unwanted photos with delete button?
c. How can i increase the size of the photos that i am seeing in the form of icons?

double clicking in iPhoto will open the photo.
The left and right arrow key will move between photos, as well as swiping on a trackpad or Apple mouse.
See >System Preference>Trackpad or mouse for options and tut
While selected or in the smaller icon view hitting the Delete key will delete the pic.
Command Z will undo the last action taken.
Periodically you have to empty the iPhoto trash. iPhoto drop down menu>empty trash
Same applies for viewing pics in a Folder NOT in iphoto, Use the up and down arrows does not work in Preview, but as you know in QuickLook (spacebar) the up and down arrows will navigate.

How to get the view in editable mode with OCA button.

Dear Experties,
I am new to CRM WEB UI ,I have got the requirement to develope a view with OCA button on it and when i click on the button it should direct to the second view and it should open with edit mode.
The Source view is table type and target view is form type.
I am able to achieve this but unable to get it in editable mode.
I have added the below code in do_prep_output method but getting dump at the line
lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
The error message is
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=CL_BSP_WD_MIXED_NODE' is not compatible for assigning with the target type '\CLASS=CL_CRM_BOL_ENTITY'.
Please somebody help me on this
lv_display = me->view_group_context->is_view_in_display_mode( me ).
IF lv_display EQ abap_false.
ELSE.
     me->view_group_context->set_view_editable( me ).
ENDIF.
DATA:    lr_tx           TYPE REF TO if_bol_transaction_context,
          lr_entity       TYPE REF TO cl_crm_bol_entity,
           lr_comp type REF TO ZL_BT131QI__BSPWDCOMPONEN_IMPL.
lr_comp ?= me->comp_controller.
Check lr_comp is BOUND.
lr_entity ?= lr_comp->typed_context->BTADMINI->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
IF lr_entity->lock( ) = abap_true.
    me->view_group_context->set_view_editable( me ).
ENDIF.
lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
WHILE lr_entity IS BOUND.
    lr_entity->lock( ).
    lr_entity ?= me->typed_context->EMAINLEG->collection_wrapper->get_next( ).
ENDWHILE.
The following error text was processed in the system:
Source type \CLASS=CL_BSP_WD_MIXED_NODE is not compatible, for the purposes of assignment, with target type \CLASS=CL_CRM_BOL_ENTITY
Exception Class CX_SY_MOVE_CAST_ERROR
Error Name MOVE_CAST_ERROR
Program ZL_ZBT131QI_EMAINLEG_IMPL=====CP
Include ZL_ZBT131QI_EMAINLEG_IMPL=====CM00C
ABAP Class ZL_ZBT131QI_EMAINLEG_IMPL
Method EH_ON_EDIT
Line 33
Long text During a 'CAST' operation ('?=' oder 'MOVE ? TO')a type conflict occurred. The source type '\CLASS=CL_BSP_WD_MIXED_NODE' is not compatible for assigning with the target type '\CLASS=CL_CRM_BOL_ENTITY'.
Thanks in advance!!!

Hi,
in CRM a context can consist of model nodes, value nodes and, unfortunately, mixed nodes. While mixed nodes implement the same interface as model nodes they can't be casted into a CL_CRM_BOL_ENTITY directly. Instead you need to perform the following conversion in order to get the model node from the mixed node:
DATA: mixed_node     TYPE REF TO cl_bsp_wd_mixed_node,
           entity              TYPE REF TO cl_crm_bol_entity.
mixed_node = me->typed_context->EMAINLEG->collection_wrapper->get_first( ).
entity = ?= mixed_node->if_bsp_wd_ext_property_access~get_model_node( ).
Best,
Christian

View photos in thumbnail mode with info visible

Similar Messages

Maybe you are looking for