View pivotTableView!1 is either missing or doesn't support this format

I have request with pivot table which is once displayed as bars and once (duplicate view) displayed as pie.
I used view selector to let the user select which view he desire to watch.
Suddenly, after it already works fine, when I changed the view selecotr from the (default) bars view to the pie view, I get the following error message:
'View pivotTableView!1 is either missing or doesn't support this format'
When running from Answers design view of the same request, it runs fine.
There is no issue regarding the data, since the bars view is displayed ok.
Does anyone know the meaning of this phenomena?

Hey! Did what I say work? If so, then it would be nice to indicate so and award points (click "correct" on top right side of my previous post). If not, what did you end up doing to fix your problem? Again, it would be nice to let us know.
Okay, you marked the thread answered thereby closing the thread, but you didn't answer my question. What worked? (And as a courtesy, mark my post "correct" or "helpful" as well as the thread itself, if what I said gave you the solution.)
Edited by: David_T on Sep 3, 2010 12:10 PM

Similar Messages

Wave Studio says "device doesn't support this format"

?Wave Studio says "device doesn't support this format"'I have a X-Fi Extreme Music card I'm using in Windows 7 (x64). I haven't had any issues with the card or the software until I installed a codec pack: Shark Windows 7 Codec pack. It worked OK, but when I try to play a WAV file in Creative Wave Studio (7), I get an error message: Sorry, your audio device doesn't support this format". Weird, since Wave Studio's "nati've" format is WAVs!!
So I uninstalled Shark, uninstalled Wave Studio, and uninstalled (from Device Manager) my sound card. Rebooted, then reinstalled the driver for the sound card, rebooted and reinstalled Wave Studio. I still get the error message and can't play WAVs in Wave Studio. The version is 7.2, and the driver is 6.0..375 (5/5/200). Anyone have any ideas?
Thanks,
Laner

CThe point is moot now, I've gotten a new computer and installed the card in that machine. Everything works great now. I would imagine there was a registry issue that didn't get cleaned, or something similar. Still, it would have been nice to resolve the problem, as someone else might experience the same issue and could find a way to help get it taken care of.
Cheers,
Laner

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks

Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

Error in allInOne.js: Object doesn't support this property or method

We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
Message: Object doesn't support this property or method
Line: 10
Char: 281690
Code: 0
URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
It's killing me because i have installed the same solution on many other server without any issue.
Ben
P.s. The Web server is a Window Server 2003 R2 standard edition

Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033, error message something similar to bootcamp doesn't support this Win

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.

if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
plus it would mean that the windows part would be a part of the timemachine bacup of osx
which it is not when it's in bootcamp

After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

To delete, tap "Edit" (tap to enlarge image)

I have cs5 and when I try to download a raw file from my Nikon 810 an error message says this versioln of raw doesn't support this camera model. Yet I just updated cs5 online.

I have CS5 and when I try to download a raw file from my Nikon 810 I get an error message saying this version of raw doesn't support this camera model. Yet I just updated CS5 online.

I do not use lightroom and I have a subscription so I can open all supported RAW formats. You will need DNG file for Your Camera's NEF files for use in Photoshop ACR version. You can open your NEF files in LR it seems so you could do all your raw conversion with Lightroom and save out Tiff files for processing in Photoshop. I do use lightroom for I do not need its library. Lightroom does not support layered files so lightroom is of no value to me. ACR UI is all I need having a second interface to Adobe Raw Conversion Engine would more annoyance than value to me.

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?

My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?

Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn't support this base station." How can I fix this?

After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn’t support this base station." How can I fix this?

Per chance is your AirPort Express an 802.11g model? If so, you will need to use AirPort Utility v5.6 to administer it. However, this version will not install under OS X Mountain Lion without a workaround.
The following is one of those workarounds:
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

For my new Airport TC I have an error this version of AirPort Utility doesn't support this AirPort wireless device. How do I find and download the latest version of AirPort Utility?

https://itunes.apple.com/us/app/airport-utility/id427276530
AirPort Utility for iOS requires iOS 5 or later.
AirPort Utility 6 requires OS X 10.7.5 or later.

Why my iPad doesn't support adobe format so can't download adobe documents

my iPad doesn't support adobe format so can't download adobe documents

What adobe format?
PDFs are natively supported.
Adobe has several apps in the App Store.

"We could not complete your purchase. (This Game) doesn't support this computer's graphics hardware.

I have posted this question in the "App Store" support community, but received no response. Therefore I would like to try here to see whether someone has any knowledge about this, the original question as follows:
I have repeatedly tried to download a game from App-Store, but always receive the prompt: "We could not complete your purchase. (This Game) doesn't support this computer's graphics hardware.
I have been in contact with the game studio's support, and they say: "This issue has already been fixed and works fine on all computers except yours (mine)". The cause allegedly related to Yosemite 10.10.--.
I've apparently been left to my own devices and decided to try this community.
"This Mac" is a late 2012 iMac 27, 3,2 GHz intel i5 that runs Yosemite 10.10.2. With 1 TB Hybrid HDD, NVIDIA GeForce GTX 680MX 2048 MB and 16 GB ram, which according to Game Studio's is well within specs.
Is there anyone out there who know a way around this or should I just face it and get on with the rest of my life?
Please?

Halonk wrote:
"We could not complete your purchase. (This Game) doesn't support this computer's graphics hardware.
Is there anyone out there who know a way around this or should I just face it and get on with the rest of my life?
There is no way around.
Best.

View pivotTableView!1 is either missing or doesn't support this format

Similar Messages

Maybe you are looking for