View Planner 3.5 Auto Login

I am having an issue where I have the GoldenDesktop Setup. It logs in without issue. This VM was created with the same customization file as the next set. Once I use the View Planner to provision the remaining VMs, each have their local admin account disabled. They do report to the View Planner. They do start the workload. However, only the original VM uploads the data. Any ideas?

Yes, agree. The auto login was working after the view agent was loaded. However, once the customization wizard ran, I noticed a few changes. The admin was disabled and the registry entries were missing under HKLM\Software\Microsoft\Windows NT\CurrentVersion\winlogin. The keys needed to login were AutoAdminLogon = "1" (Enabled), DefaultUserName = Administrator DefaultPassword = Q1w2e3r4! . This was present before the customization wizard. So, I looked at the customization wizard closer. On the 4th step for "Administrator Password" you need to set the password toe Q1w2e3r4!. Furthermore, place a check mark for "Automatically log on as the Administrator". I also set this value to 10. After doing this, the login portion worked.
The second issue I had was the .bat file behavior. It needed to be set to "open this file each time". Since there were only 50 desktops, I check the box on each and pressed open. I'm sure there is a setting to fix this. However, I haven't researched it enough to comment just yet.

Similar Messages

Auto login problem in Discoverer -- Urgent Help

Hi All,
I'm trying to call discoverer 4i plus from viewer.
I did auto login for discoverer 4i plus for 9i AS(2.1).It worked
fine. I did the same for 9i AS(2.2).Basically i tried to get
login inforamtion from cookies in webdisc.js file .The edited
webdisc.js like this
var user = getCookie ("Username");
If i remove this line my discoverer 4i plus works fine without
having any problem.if add the above code then i get the
following error
"Unable to connect to the Oracle Discoverer Application server.
Failed to connect to session XXXOracleDiscovererSession4 using
OSAgent."
Any help please..
Thanks in advance,
Sapna

Hi Jerome ,
Thanks for the reply.
I installed 9iAS(2.2) on NT. clint is on WIN2000.
Are u using cookies?
In my viewer, i've provided a link to plus. When an user hit
this link it should take the userid from viewer and auto logins
to plus. In viewer, i'm putting the userid and password in a
cookie and reads the information from cookie in webdisc.js(This
is disco plus script file for auto login)
I did the whole process in 9iAS(2.1) it works fine. Only this
version(2.2) i'm getting the error
"Unable to connect to the Oracle Discoverer Application server.
Failed to connect to session XXXOracleDiscovererSession4 using
OSAgent."
I'm interested to know how u did auto login on NT using <PARAM>
tag.
Best Regards,
Sapna

Problems joining Wi-Fi networks that require viewing a redirect page in iOS 8.1.1? Check your "Auto-Login" setting.

Are you having problems joining previously used Wi-Fi networks that require you to view a login or redirect page (say to accept Terms of Use) first? The problem could be your Auto-Login Wi-Fi network setting.
I found numerous cases where I could not access in-store Wi-Fi networks (Nordstrom was one), hotel networks or in fact networks where you had to first view a Terms and Conditions page or where you had to login via a web form.
These were all networks I had used before.
This appears to be due to the "Auto-Login" setting assuming that once you (re)join a previously known network you can just go ahead and use it without further action. When the iOS device receives an error trying to use the network, it silently drops the Wi-Fi association.
If this is happening to you, follow these steps:
1) Go to Settings -> Wi-Fi
2) Select the network you want to join
3) When a check-mark appears next to the SSID, press the "i" button on the right hand side
4) Set Auto-Join however you want, but shut off the Auto-Login switch
5) Now attempt to use the network and you should be presented with the usual redirect page with terms you must accept or where you must login to use the Wi-Fi network in question
This cleared up the issue for me everywhere I had previously been having issues.

Just let me get one thing straight...you don't change don't do this for the PC you have your router plugged in to?
"For Vista:
1. Open Control Panel, Network and Internet, Network and Sharing Center, Manage Network Connections
2. If Wireless, Right click on your Wireless Network Connection, otherwise, Right click on Local Area Connection and click Properties
3. Highlight Internet Protocol Version 4(TCP/IPv4)
4. Click Properties
5. Tick Use the Following IP Address and enter the IP you want to use for that PC. I would start at 192.168.0.100(D-Link) and work your way up on each additional device. The second device would be 192.168.0.101, the 3rd, 192.168.0.102 and so on. Like I said, different brands of routers use different IP's, so it could be 192.168.1.100 and so on, so you will need to know the IP address of your router first.
6. Subnet Mask is 255.255.255.0 on all pc's and devices
7. Default Gateway is 192.168.0.1(D-Link) or whatever your router's IP is on all pc's and devices
8. Tick Use the Following DNS Server Address and enter 192.168.0.1(D-Link) or whatever your router's IP is and click OK.
9. You will need to do this on all Vista Pc's"

Auto-Login Network User

I am wondering if there is any way to auto-login as a network user?

Quit System Preferences.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the System Preferences and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Auto Login Option, Perhaps?

I'm noticing that the forums don't (at least, not that I've been able to find) have an option to automatically log in whenever I visit the site.
I'm a huge believer in auto-login, especially as I tend to (as I've done today) navigate away from one page (such as the forums) to take care of something, and like being able to navigate back and have the forums still live. (And while I do know there's a possibility to prevent myself timing out, using auto-login also helps when I access from multiple places throughout the day... my desktop, my laptop, my computer at work...)
Is there any possibility adding such an option?
Thanks in advance!

i_like_turtles wrote:
i also agree with the auto logon, its like a 10 minute idle period and boom its gone !!
But if you set the timer as a I suggested in my previous post in this thread most of the "boom its gone" will be gone The only time I now sometimes get logged out automatically with the timer set to 2 minutes is when I view a thread and then just leave it sitting there instead of going back to the list. Try it, it is not the same as auto login by any means but it does mostly keep you from getting logged out due to inactivity.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248
Message Edited by Justin on 07-29-2009 03:11 PM

Deploy an auto-login user on 10.9.5

I am trying to create an auto-login user on our network of 10.9.5 machines, but the com.apple.loginwindow.plist reverts itself after any change I make (I have tried changing it in terminal and editing it manually). I understand that starting with Mavericks that plist files are now cached, and I believe that this has something to do with it. Has anyone been able to implement auto-login network wide on 10.9.5?

Quit System Preferences.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the System Preferences and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Auto login in Solaris 10

Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
PS. Reposted, because I submitted my query in the wrong forum.
Add the line below, to */etc/inittab* file.
ip:1234:once:/full/path/to/scriptEdited by: mysol on Aug 4, 2009 4:12 PM
Edited by: mysol on Aug 4, 2009 4:15 PM

What do you mean by auto login?
Do you want to implement Integrated windows authentication in OIM Design console. If yes, then I don't think it's possible.
Post your requirement here so that ppl can help you out.

Auto logins on websites no longer working

I recently (a couple days ago) got a pop-up on the lower part of my screen that said that firefox was going kind of slowly or something along those lines and said if I would like to fix this that I could click this button. Well I did that and it took me to a page that talked about resetting firefox to its default settings but that all info pretty much would be kept correct like my passwords, bookmarks, addons, and other things like that. Well I said what the heck and tried it and when it was finally done doing what ever it was doing I get back online with none of my opening tabs aloud to be there so that was wiped out, my book marks were there so that was good, but all of my addons like X-notifier and things like that were now gone, and when I go to pages now it has no idea who I am. My user names don't show up or the passwords. I can login to them and it might be fine for 5-10 minutes but then all of a sudden it tells me that I need to login all over again. Even my X-notifier does it and its supposed to know my login permanently so I never have to type it in. But I can be in the middle of sorting my emails and trying to delete something get a message that says I am no longer signed in to my email account.
I have searched all over in the tools>options area and made sure everything is the same as it used to be with saving passwords and even scrolled through my stuff saved to see if something had gotten deleted but they are all there and I see no reason why it would not log me in to the ANY site. I know some of the sites out there don't like to allow auto login stuff which I am fine with but some of these websites I am the owner of and I know for a fact that its not my site doing it. The repeated login issue is really getting on my nerves cause its started to disturb my daily working. Please help me with figuring this out.
Thanks
Troy

I am going to try the stuff mentioned by you above and see if it helps. I know its affecting this site as well and isn't keeping logged in at all as I have had to re-type my password each time I come here.

Auto login in AUR with Firefox.

Is there a way to auto login into AUR with Firefox. Now when I get there, the username and password is filled in. But I would like to be logged in. I think Opera does it.
Possible?

It should work, I've updated my FF last week and had no problem so far. Actually I'm using FireFox 2.0.0.8 to post this message. I have noscript extension as well.
All you need to do is enable cookies for forms.oracle.com/ and set it as whitelisted if you have any security extensions.
Tony

Auto login in Design console in OIM

I want to know the changes to be done so that I can auto login to xelsysadm when using design console in OIM 9.1.0.2
Any help appreciated

What do you mean by auto login?
Do you want to implement Integrated windows authentication in OIM Design console. If yes, then I don't think it's possible.
Post your requirement here so that ppl can help you out.

How to auto login in Solaris 10

Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
P.S. Just noticed I might have posted in the wrong forum. Sorry !
Which forum should I post again ?
Edited by: mysol on Jul 20, 2009 10:44 AM

ZFS has not yet been integrated into Solaris 10...
At this time you need either the "Software Express for Solaris 2/06"
( http://www.sun.com/software/solaris/solaris-express/ ) or the
"Solaris Express: Community Release"
( http://www.opensolaris.org/os/downloads/on/ ) to play with ZFS.
.

Auto login and password problems with Safari after OS 7.0.4 update?

Hi all,
I updated my IPad 4 to OS 7.0.4 , now Safari won't auto login to my favorite forums and won't remember my user names or pass words. I checked in Safari settings and Names/passwords and auto fill are on. Have restarted a number of times but no change. Any fixes?
Thanks.

Make sure Private Browsing is off.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

Help required on configuring Auto Login...!

Hi All,
I'm using SUn ONE Webserver Service Pack 9. And once after starting my Web Server instance and when ever I invoke my application url (http://localhost:8080/) It automatically takes me inside the application. I need to remove this auto login configuration. Because whenever I use Logout and login using some other user_id. It still logs in as the same Auto login user name.
Kindly help me.
Thanks in advance.
SAM

Hi,
I resolved the problem. It was too some more properties files which needs to be added to the app.
Cheers
SS

Auto Login Setting Not Being Saved

I'm trying to enable auto login. When I go to sys prefs and set auto login to the userid I want and exit sys prefs then go back to sys prefs it is reset to the original user. Any ideas what is wrong?

Try to move this file on th desktop and restart :
youraccount/Library/Preferences/ByHost/com.apple.systempreferences.xxx.plist
HD/Library/Preferences/com.apple.loginwindow.plist
If doesn't fix the problem , put them in their original place.

Safari Auto-login/ Auto-fill problem

Hi!
I recently updated my safari after which I have been unable to auto login to my yahoo,gmail etc accounts. I have checked my safari preferences and all 3 auto-fill webform tabs are clicked. Also, when I go into yahoo, it does not prompt me to ask if i want to save my password. For my other accounts e.g gmail, they prompt me and my password + user-ids are still saved, just that i have to press the sign in button.
Also, it stays signed it as long as i am on safari. However, if I were to quit safari and use safari again, it goes back to square one and no longer keeps me signed it.
What can I do to enable safari to auto-login for all my accounts?
Thanks!

I have asked a similar question several times before, and I have the answers varied from the typical I do not have that problem to its a security feature incorporated in Safari.
I tend to think it is a new feature added ito safari n the last several months (via an update).
The bottom line is I am NO longer able to stay logged into various websites if I quit safari, even though the websites have the feature available that should allow a user to stay logged in for 2 weeks.
The only way I can now stay logged in for an extended period of time is to NEVER quit Safari.
That is not an option for me.
rjj

View Planner 3.5 Auto Login

Similar Messages

Maybe you are looking for