View Settings change when message is selected

When I select a message to view all of the other messages's view order changes. I go to VIEW in toolbar and the SORT BY selection has changed from ORDER RECEIVED to SUBJECT and the order has changed from DESENDING to ASCENDING. This happens about every time I go to INBOX. What do I have to do to keep the settings permanent?

are you perhaps clicking on the column headings instead of the actual mail item? clicking a heading sorts by that item and clicking again reverses the sort.

Similar Messages

JPGS are set to open in Photoshop Elements, but they open in Windows Photo Viewer instead, even when I specifically select Photoshop (and it's the default app)

JPGS are set to open in Photoshop Elements, but they open in Windows Photo Viewer instead, even when I specifically select Photoshop (and it's the default app)

Hi,
It seems this is a Microsoft related. You are referring on how to set JPG Image in Photoshop Elements by default. You may try visiting Microsoft's Support page http://support.microsoft.com/ for you to get the correct information/help you need.
Thank you.

Settings changing when adding to another movie

Each time I attach a new chapter (mini movie) PROJECT to the already existing main movie PROJECT the settings change. I have tried adding on the front with the new chapter as well as trying to add the main movie to the mini movie. Is there a way to lock all settings on a movie so when it is added to another movie the setting won't change oon either clip. The chapter movie is approximately 1 1/2 minutes long and the main clip is approximately 9 Minutes long. There are several transitions, and scrolls included in both clips.
Message was edited by: jimfromdenver

Hi Luis, thanks for the reply. I first made a video approximately 8 minutes long. I used digitized video, still images, sound tracks, titles and numerous transitions between the clips. I then opened a new project and made a movie of one of the last letters sent home by the veteran prior to his death. I also used transitions, movie clips, titles and various images. So far I have three of these last letters completed. I was able to copy and pasted two of the letter clips in front of the main generic movie. However, when I attempted to paste the third clip at the beginning of the main movie and two letters - it causes some of the titles, scrolls to overlap.

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

Is the transaction log is changed when i execute select statemetns

hello
i want to ask about updateing the transaction log: is it modified when a select statement is executed
is it changed when update,delete or insert statements are executed ?

In general SELECT statement don't write redo but if you use SELECT with FOR UPDATE clause, then redo is generated and written to redo logs or in special cases like delayed block cleanout. INSERT, UPDATE and DELETE write redo, yes.
Note that Oracle right name to use is redo log and not transaction log which a Sybase/MS SQL Server concept.

Screen color settings changes when certain software is launched.

Since today I noticed the screen color settings of my Macbook Pro 17" (beginning 2011 model — Running OSX 10.8.4) is changing when certain software is launched. In this case, Indesign CS6.0 gives a strange blue hue over my screen, but when I check my screen color settings, nothing has changed, everything is set the same as when I don't run the softwares that change my screen color settings. I don't recall changing any settings that could have triggered this action. I didn't change any settings in Indesign CS6.0. I do regularly use CleanMyMac 2 to clean out my computer, maybe this has changed some settings? How can I change this back to normal? Google didn't help me neither.

Ah right, don;t use laptops much and always forget about that one, good catch. Switching graphics cards would definitely have an effect.
Just remember with that unchecked you will decrease battery run time so you might want to switch it back on when you are not doing graphics and you are on battery.
regards

My settings change when I change sim card?

Hi,
I am going to go to Croatia for a holiday. I would like to buy there some prepaid sim-card. Does Blackberry's settings will change or it would be all the same when I will change simicard?
Solved!
Go to Solution.

Hi and Welcome to the Community!
Nothing should change when you do this. With legacy BB devices, there could be some changes...but with BB10, nothing should change.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Printer Settings change when switching between printers

First time in the forum, so please be gentle. I know little about Adobe.
I am working with Windows XP (SP 2) machines (I know - should be at least on Windows 7, but can't change what my company has) and have Adobe Reader 8.1.2. We have run into a "bug" of sorts.
Many of our locations (these are PCs all off-site) print labels (pdfs) with a Zebra brand printer where the labels are 2.25 by 4.00 inches. The Zebra printers are always attached directly to the PCs where they create these labels. Sometimes, they want to send the labels to a Lexmark printer that is attached at a Primary Server elsewhere. When they do that, they make sure to choose "Fit To Printable Area" under Page Scaling when the Print Box comes up so that the 2.25x4.00 label is enlarged to fit on 8.5x11 inch paper. The problem we run into is that right now, the default settings for these Zebra printers is 2x3 inches and Portrait. We need them to be 2.25x4 and Landscape. The user makes those settings changes and saves them and it used to be those settings hold once they save them. We also have to change our Lexmark settings to "Letter - 8.5x11", otherwise it defaults to "Custom-4.88x21". Recently, there's been this bug where if they save the settings for Zebra, print something, it's fine. They switch to Lexmark, print to it with "Fit to Printable Area" it's also fine. When they go back to the Zebra printer, suddenly the saved settings are gone and it's back to default.
This also is happening in the reverse - if the user usually uses the Lexmark, but switches once to the Zebra, then back to the Lexmark, the settings have defaulted again. Someone here said they remember seeing something like this before in regards to Adobe Reader. Does anyone have any ideas?
PS - I am creating a new image which will have the correct default settings for our needs so that hopefully this will not be an issue in the future.

Hi BigRedEO,
Thank you for posting on the forums. This seems more like a printer issue as it is not retaining the settings.
Kindly try updating the drivers for the printer and check.
Thanks,
Vikrantt Singh

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

Eax settings change when playing

I have setup the eax for playing ravenshield, by changing a bit in EAX audio effects.. And to begin with it worked.. But for some reason its begun to change my settings when playing.. Its mostly the "reverb" slider that changes even though I saved the settings... Is there anyway to fix this?.. I might add, thats it is not the same value it changes to every time. My card is the Audigy 2 zs?ThxMartinMessage Edited by Rage974 on -03-20060:3 PM
Message Edited by Rage974 on -03-20060:9 PM

Locking the prefs only prevents you from changing the panel. Monitor settings for multiple monitor configurations are not saved. If you want to be able to handle multiple monitor configurations then use SwitchResX. Then you can switch among configurations with a hot key or menu.

How to make signature field work for reader users? Security settings change when doc is extended???

I've been struggling to correct a problem all week and am at my wits end. Customer service was no help as the person I spoke with could barely speak english let alone understand the problem as I explained it to him. Hoping someone here can provide some insight, here's the issue:
I'm using a Windows 7 Professional OS. I created a Microsoft Word doc and used Adobe Acrobat XI Standard to create a form from it. It automatically detected the fields, which includes a signature field. I went through fixed it all up how it needed to be and did "save as other - reader extended pdf - enable forms fill in & save in reader".
The document is a report that will be sent to a small number of people that have to fill it out, digitally sign and return and I'm assuming that most if not all of them will open the document using the free Adobe Reader. So I thought extending it is what I needed to do to make sure they could fill it out, save it to their computer if need be, and also sign digitally. The signature field was automatically added in by acrobat for me and I did not change the properties of it at all except to add a border.
When I open the form in Reader (also XI) I can fill out all the fields, save it... but not sign it. The security settings say signing is not allowed even though I went back to the original pdf form and the security settings on it say allowed for everything. I don't know how to fix this... please help!!!
I've attached some screen shots but can include more if needed...

I don't have the Enable More Tools option under Reader Extended PDF. I just tried to download the XI Pro trial version and it won't complete installation because of the standard version I already have. Any advice or workarounds you know of? Going to the boss for $$ to upgrade to Pro is what I'll consider my last resort if the issue is truly that I have to use Pro to enable more tools for reader.... I appreciate your reply though. I sat here all day yesterday fingers crossed that SOMEONE would give it a go!

Microphone settings change when switching between a

Hi all,?After much fun trying to get my mic working with my Xfi Elite Pro i am now having problems with the sound properties changing the settings when i switch between ap
ps.
If i sit with the audio properties open and set the mic to the line in 2/mic port it works, then if i fire up skype, msn, guild wars, bf2 or any other app in which i want to use the mic the setting switches back to the "microphone", i then have to minimise the app and force the setting back again.How can i get this setting to be permanently set to line in 2/mic?HELP!!

Some applications will do this, check out this thread for a little tool that might be of some use to you:
http://forums.creative.com/creativel...ssage.id=44236
Cat

DNS settings change when restoring image

Situation: In one of our computers we changed the DNS settings from static
to dynamic (DNS through DHCP). We checked these settings and they worked.
When restoring the image on a other computers the settings are back to
static. How is this possible? We have tried all but we can't find the
sollution.
Thanks,
Marcel de Jager

On Thu, 05 Jul 2007 12:27:36 GMT, Marcel de Jager wrote:
> When restoring the image on a other computers the settings are back to
> static. How is this possible? We have tried all but we can't find the
> sollution.
which patchlevel are you using?
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Color Settings Changed when Baby pounded on keyboard

My entire desktop and windows have been changed to a weird flourescent combination of colors. My baby son pounded on the keys and suddenly the colors changed in every application window and picture. Everywhere. I can't figure out how to change the setting back.
In System Prefs I tried "Displays" and "Desktop and Screensaver", but couldn't find the solution.
Is there a keystroke or way to reset the color settings to normal?

I figured this out myself, but thought I'd post the answer. In Universal Access within Sys Prefs, there is a button to change the view from White on black to Black on White. That was the trick. I have no idea what quick keys my kid hit to do this, but there you go.

Detail Table Not Changing When Master Table Selection Changes

Using JDev 11.1.1.6.
I am working through some Oracle tutorials (Storefront Demos).
I am accessing the Fusion Order Demo (FOD) schema.
I have created VOs based on BCs for Categories, Subcategories and Products.
I have added all to my data model and tested functionality using the AppModule. This works as expected.
When I drag the Subcategories onto my jsf page as Master-Detail (Table-Table), the initial list is based on the first index of the BrowseCategory data control.
When I click on another row in the master table, the detail table refreshes but the same data appears.
I confirmed that the selection changes on the master table.
I added a button on the page and checked the BrowseCategoryIterator using some backing bean code and the iterator remains on the first record.
I checked the SelectionListener on the table and it is set correctly as   "#{bindings.BrowseCategory1.collectionModel.makecurrent}"
Does anyone have any idea why the detail table is not getting updated based on a relationship to the master table?
Thanks,
Raymond

Hi,
From what you are saying:
     1. it's working in application module tester
     2. you verified the current row of the iterator and you found that it is stuck on the first row
The problem is then that the selection in the table is not setting the current row in the iterator.
Try to add a custom selection listener where you just execute the "#{bindings.BrowseCategory1.collectionModel.makecurrent}" expression. this is just to make sure that the listener is being called.
Also, the problem might be that the current row is correctly set by the table selection, but later in the life cycle it is being reset. so maybe you can also overwite the methods that set the current row in your VOimpl (again by jsut calling the supper) to check if and when these methods are called.
Regards,
Elias.

View Settings change when message is selected

Similar Messages

Maybe you are looking for