View sites without assigning "Web Page Composer" role

I have created a site in web page composer, created a "Test" role in portal and connected it with the site.
Now the requirement is to assign the "Test" role to users so that users can see the output of the sites as a visitor but they should not be assigned the "Web Page Composer" role.
I removed the role "Web Page Composer" from users and assigned them the "Test" role to view the output. As a result, they are able to open the site but do not see any content.

Hello Arpita,
You should check the initial configuration steps from the online documentation
http://help.sap.com/saphelp_nw70/helpdata/EN/45/3fea9ff34d4a18e10000000a114a6b/frameset.htm
Do you have the Everyone group assigned to the Standard User role (eu_role), and have you assigned your test user to the Everyone group? 
Check the following documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/47/f0f7415e639c39e10000000a155106/frameset.htm                          
Regards,
Lorcan.

Similar Messages

  • Nested site navigation using Web Page Composer (WPC)

    Is it possible to nest navigation nodes using Web Page Composer?
    I have created a WPC site and added pages, but I am required to create a node with sub-pages (similar to adding a folder to a workset) for a site.
    Has anyone done this or know how to easily do this?  I do not want to maintain a separate WPC site (and corresponding workset folder) for each navigation node/group in the structure hierarchy.
    This is an example of what we are trying to accomplish in our navigation structure using a single WPC site:
    * Page 1
    * Page 2
    + Group 1
        * Page 3
        * Page 4
    + Group 2
        * Page 5
        * Page 6
    * Page 7
    Thanks in advance...
    Points will be awarded for helpful answers.

    Hi Angie,
    Could you please guide how to make the RSS link lists work in WPC, we do not receive any updates from external websites.
    Thanks,
    Shravs

  • Unable to create a Site Content in Web Page Composer

    Hi All,
    I am new to WPC and would like to explore more on the same. I tried following some blogs inorder to create and publish Web Pages.
    I was stuck at a point where we need to create a site content. I guess all the permissions required to access each folder is properly set.
    When I tried to create a content like for example an article... A window pops up which says please select a document type and I dont have any option to select whereas I have a cancel and next button at the bottom of the screen. When I click next nothing happens.
    Did anyone went through this issue? What am I doing wrong? Did I fail to set some role to the author creating content?? Author has wpc_editor_role though.
    Regards,
    Rekha Malavathu

    Hi Sandeep,
    The popup window (which I suppose is an XML Editor) doesnt have any UI Element to select when I try to create any content... may it be an Article, Linklist, etc...
    I am using WAS 2004S SP 14. As I mentioned, all the xml and xsl files are available in the folder and even in the KM Configuration.
    My problem is, I am unable to create a content as the popup window is blank... No UI Element to select or enter.
    Regards,
    Rekha Malavathu

  • Migration of an existing web site to Web Page Composer

    Hello,
    I am investigating the options and the feasibility of the migration of an existing web site to a Web Page Composer (WPC) site. The web resources of the site can easily be copied to KM and used afterwards in WPC containers. However, they can neither be integrated to the WPC site navigation nor edited through the WPC UI. For example, only WPC Web Page or Web Sites can be WPC navigation nodes.
    Has anyone ever done or tried such a migration? Do you know where I could find a description (or the javadocs) of the WPC API? Any suggestions or hints will be much appreciated.
    Thank you
    Youlian Dimitrov

    Hi Youlian.
    If I understand correctly you have rebuilt only a few hundreds of the old pages using WPC forms. Did you do this manually or you have found a way of migrating them programmatically?
    Yes, we did it manually for a two reasons:
    1. short timetable;
    2. 20 intranet sites with variety of used technologies and tools, styles, navigation structures.
    Did you leave the rest of the pages as HTML (non-WPC) files?
    Yes. But we imported them into KM.
    Does it mean that you have implemented only part of the navigation structure through the WPC/portal navigation?
    Yes and no.
    Firstly, in our case it would be a bad idea to bring all legacy, sometimes cluttered, navigation structure to a new platform as is.
    Secondly, keeping in mind that in a common scenario portal already has own top level navigation you should carefully decide how deep is your site navigation structure will be.
    Finally, migration it is a good time for information architecture redesign based on standards and guidelines.  
    Assuming that you have adjusted properly the links to all resources, have you encountered any particular navigation or display issues following this approach?
    I could remember two limitations concerning a navigation:
    1. you should avoiding links to navigation nodes inside non-wpc html files, because in this case a target page opens without DLN;
    2. first linked non-wpc html page, which placed outside wpc container, should be opened in new window.
    As for design, all our display issues caused by inline styles within source html files.
    Did you notice any noticeable performance degradation after the migration?
    We didn't have any degradation of performance. However, it is highly individual and depends on your portal infrastructure.
    Best regards,
    Aliaksandr Zhukau

  • Web dynpro iview in web page composer ?

    Hi All,
                     I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
    Regards,
    Rahul.

    HI Rahul,
    As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
    But you can try to create a URL iView from Web Dynpro application
    and then add that URL iView to your page.
    _Vishal

  • Pictures not loaded in a Web Page Composer site without admin role

    Hello!
    I have got an new problem concerning SAP Web Page Composer.
    I have created an new site with some paragraphs and some pictures. The problem is when I, with admin role, access this site I am able to see everything. When another user, without admin role, is trying to access this site he is able to see everything but the pictures. All paragraphs or linklists are displayed but the pictures are not available. When giving the user the admin role he also become able to see the pictures.
    I know it is a permisson problem but not know where I forgot to set the permissions to "every user". But I do not understand why this is only concerning the pictures and every other Web Page Composer element is displayed properly, although the pictures permissions set to the same as the other elements. When trying to access the pictures by the user without admin role NetWeaver is throwing following exception:
    "com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs)"
    Thanks for your help in advance!
    Regards
    Georg

    The whole exception:
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: pcd:portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs - user: Manager,
    at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1932)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:234)
    at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
    at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
    at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.wcm.portal.connection.KmConnection.handleRequest(KmConnection.java:52)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs)
    at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
    at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
    at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
    at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
    at javax.naming.InitialContext.lookup(InitialContext.java:347)
    at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1919

  • Web Page composer : Localizing Web Sites

    Hi,
               I have done a PoC on Localizing Web Sites in web page composer. As you may be aware localization comes with 2 variants. One is the language and the other is the "Region" variant.
               I have created region variants in KM admin and have created Web Content using language and region variants. I am able to see the language variants working successfully when the user changes the language.
               But how do I get the region variants to work? Online [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/46/792f9b608c0ad3e10000000a11466f/frameset.htm] s says "...to select the ....region for displaying Web pages, select Personalize in the portal masthead...".
               My challenge is...
              1) How do I get to view and select the "regions" i have created in KM to show up in User Personalization ?
              2) My UME is on ABAP stack. How do I get this to work ?
             Any help on this will be much appreciated!
    Regards,
    Winston

    Hi Winston,
    To enable end user selection by end user of region, check the configuration steps [here|http://help.sap.com/saphelp_nw70/helpdata/EN/46/71b0701a3601dce10000000a1553f7/frameset.htm] under the section titled Selection by user: Adding an iView for personalizing the region in the portal.
    Hope this helps.
    Best Regards,
    Joseph

  • I want Full Documentation for Web Page Composer to Create Full Fledged site

    Hi Experts ,
    I want to know the Full fledged Information And Docs how to make Intranet website Using WEb Page Compopser .
    Send me ur Docs and pdf * ANy screenshots to : venkat685atgmail.com
    Regards ,
    Venkat

    Hi Venkat,
    You might want to check the following resources for creating web sites:
    - SAP Help [Creating and Publishing web sites|http://help.sap.com/saphelp_nw70/helpdata/EN/46/792f9b608c0ad3e10000000a11466f/frameset.htm]
    - Web Page Composer content creation [blog|https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5924] by Roland Wilfer (check also Christopher Kaestner blogs about additional WPC features)
    Hope this helps.
    Best Regards,
    Joseph

  • Web Page Composer - Creating Frontpage

    Hi!
    I'm trying to create a frontpage with the web page composer and have some questions. Is it possible to create a normal article and only display the introtext and if you click on it you get to the full article. I think there must be an option to adapt multiple xsl rendering files to the containers in the page layout and other xsl rendering files for the full article view. Or do i have to create a shor article and a normal article and show the short article on the front page and create a link to the full article, but this is not really effective. I have read all articles about the web page composer but didn't find any conclusion.
    Another question is about the iviews. I managed to create an entry point for iviews, but if I assign an ivew to a container, the front page automatically redirects to a new page with the iview in it. I wanted to integrate a calendar iview. Is there any tutorial for this, didn't find one.
    Thank you very much.

    Ponraj -
    Procedure
    1. In the Web Page Composer, navigate to the Web page that you want to integrate into the portal navigation.
    2. To copy the path to the Web page to the clipboard, choose Copy Path from the context menu for the Web page.
    3. Choose Content Administration → Portal Content.
    4. Choose New → iView from the context menu of a folder.
    5. Choose Portal Component as the source type.
    6. Choose the com.sap.nw.wpc.runtime portal archive. On the next screen to appear, choose default.
    7. Once you have created the iView, choose the Web Page Composer category in the property editor.
    8. In the RID of Compound Document property, enter the path to the KM folder representing the Web page.
    Example: /wpccontent/Sites/MyWebSite/Web Pages/MyWebPage
    You can paste this path from the clipboard.
    9. Open the workset or role that you created when you carried out the initial configuration.
    10. To add the iView to the workset or role, choose Add iView to Workset/Role → Deltalink from the context menu of the iView.

  • Portal themes and Web page composer

    Hi,
    I am wondering how applying portal themes would impact the views in Web Page composer based / created sites?
    We are trying to create new sites using web page composer tool but was wondering if simply applying portal themes solves our problems of display (colors etc).  I know that portal themes would not cover the layout of the pages but atleast we only have one other thing to solve.
    By the way was also wondering if I got the concept correctly. When an admin person applies a portal theme, the specific team he or she assignes to the users will be permanent for all the users under a role or group right?
    thanks in advance

    Well Alvin, logically the theme applied to portal should take over any content published using WPC. I remember during our implementation, we did not have to had any extra efforts for creating themes for WPC sites :-)...Also for your other question, as per the display rule applied, the theme will be applied to all the users under a group.
    ~Cheers,
    Vivek

  • SAP Web Page Composer: Detailed Navigation is not getting built

    Hello!
    I am new at this forum. At first I´d like to say hello to everybody! :]
    Our issue concerns the following:
    We started to work mit the Web Page Composer to build websites für our workers. Everything worked fine until the detailed WPC-navigation is not getting built anymore. We have this issue after a portal restart. Every steps to build and publish a website were done the right way.
    1. Publish navigation und paste it to the external connector of the role in the form "wpcnavigation:///wpcontent..."
    2. Permissions and security zones were set. Even the super admin is not able to see the detaild navigation anymore.
    It is still possible to put single webpages to iViews and then to display them in the portal. And every function of the Web Page Composer works fine. The caches are deactivated. I tried to build a new site with new pages and a new navigation but there is the same problem, no detailed navigation is shown in the portal navigation. The role is assigned to a user and he can see the role at the top navigation but when clicking on it no detailed navigation appears, just a blank page.
    As I mentioned this iusse appears after a portal restart. What could be the problem?
    Thank you in advance!
    Best regards
    Georg

    Hello Sandeep!
    I created a new role and also did the Initial Configurations but it still does not work. May be there is a problem with the external connector where I connect the WPC navigation with the portal navigation? I know it sounds confusing but is there may be a way I could "reset" the WPC configuration? Because at the moment I tried to merge roles the system saved "some configuration" and started to avoid displaying the detailed navigation. So if could delete/reset/change this configuration, it could be that the navigation will be displayed again? I do not unterstand, if I just use one role and so avoid merging roles it just should work again? Or I am on the wrong way? Hopefully I am not telling bull**** right now! :]
    At this moment our system running SAP NetWeaver 7.00 SP18. The patch is only available at least SAP NetWeaver 7.00 SP20. We are probably going to upgrade in october to SAP NetWeaver 7.00 SP23 and then we can update the WPC, too. Our Basis said, I have to wait till october. Before this upgrade no updates will be done.
    Thanks for your help so far!
    Kind regards!
    Georg
    Edited by: GBrauer on Aug 30, 2011 9:21 AM

  • Links Web Page Composer

    Hi!
    How can i get the link of a page in web page composer.
    I´m going to details of page and Settings - Properties - Access Links - Content Link. But when i use this link in "href" it show the page in full browser and i lost my area of masthead (that is in framework)..
    Thanks

    Hi Leo,
    The direct access link for each WPC web page is dynamically constructed after you publish your site and assign the value of the site navigation path to your role folder property External Connector.
    So to answer your question, you can not take the portion of the URL I indicated and derive the complete WPC page path as it depends partially on your role PCD path, and also the web page path in the KM WPC repository (i.e. <PCD_PATH_TO_PAGE_OBJECT> does contains a PCD path and a KM path to web page in the WPC KM repository).
    Once you are able to get the correct access link of a WPC web page from its property Content Link, your should see the web page displayed within the entire portal layout framework you configured for your system (i.e. includes masthead, top level and detailed navigation).
    Hope this clarifies a bit.
    Best Regards,
    Joseph

  • Web Page Composer

    Hi,
    I am working in EP NW04s SP 14. I am using web page composer for designing a web page. I have followed all the steps and finally assigned the web page in the navigation structure to both the anonymous user and the logged in user. I am able to view the details in logged in user. But the contents are not viewable for an anonymous users.
    I have given anonymous access to page layout, iview templates, security zone as mentioned in the thread
    Web page composer and end user
    We have anonymous access to KM content as specified in the note 837898. But still the contents are not displayed? Any specific reasons?
    Consultants worked in WPC, kindly help...
    Thanks & Regards,
    Ganesh N

    Hi Ganesh,
    Check my [reply|/thread/916997 [original link is broken]; to this similar post in the Knowledge Management & Collaboration forum.
    Hope this helps resolving your issue.
    Best Regards,
    Joseph

  • Web Page Composer (WPC) – Web page - Approval process

    We have requirement with our web publishing environment where we want to stage the web pages for review before they are published for public. Currently, if you develop a web page in Web Page Composer ( WPC ) and click publish to review the content/layout. The page is published for public and included in TRex and can be searchable.
    We thought KM Approval process will help resolve this issue. The approval process work very well with the u2018Site Contentu2019 where once author develop the content (article, paragraph etc.) and submit for approval in this case Editor (role). The content under site content folder is not published (not available for public) until approved by Editor.
    This same approval process does not work on the Web Page folder. We have exactly same permission/ Service permission setup on the Web Page folder. Even though the u2018Approvalu2019 is turned on the Web Page folder it does not inherit the same to new web pages created or existing web pages in that folder. If we go and turn on the u2018Approvalu2019 on a page then we see a u2018Approvalu2019 button in WPC but when you submit the page for approval it pops up another screen with below message.
    Confirm that you want to publish the page. A new version of the homepage will be created and, if appropriate, submitted for approval. Changes to pages not subject to approval are active immediately.
    When you confirm this message nothing happens (no workflow kicks off).
    I would like to hear if any one has tried the approval process on WPC web pages. If you are not using this process how you are staging the web page for review before publishing to public.
    Thanks.

    Hi Bertina,
    We encountered the same problem couple days back in our environment. There is a SAP note (# 1294833) which details the issue but affected version indicated in this note is different then what we are on so we decided to create a note for SAP.
    Below is SAP response for this issues
    13.09.2010 - 08:52:12 CET - Reply by SAP     
    Dear customer,
    I can confirm that the issue described in SAP Note 1294833 is indeed
    present in EP 7.01 SP4 and is the reason you are currently experiencing
    this problem.
    Unfortunately, as outlined in the note, there is no workaround
    available but our developers have advised me that the fix will be
    included in the next patch for KMC WEB PAGE COMPOSER 7.01 SP04.
    Hope this helps.

  • Web Page  Composer Questions

    Hey again
    Im new to web page composer so here are some questions that i cant seem to find a proper answer to:
    1- Im using  a Framework witch have two zones:
                     Header Component - Normal Iview
                     Content Area - witch changes depending on top level navigation node
                                          This area is mainly build with pages that have detail navigation and a iview to a WPC Page.
                  My problem is: when i preview the iview's im using in content area i can see the WPC im supposed to see , but when i log in as a user that is supossed to have this framework and content as the only available , this iviews to the WPC content are not really showing. the tray is there but no content inside it.
                  What could be the problem?
    2- Im used to have my Custom CSS / JavaScript in components but with wpc that wont be the case anymore as we want people to change content if they want too. is there a way to load CSS's without a "invisible css provider component" ?
    Thanks

    Hi Vijayalakshmi,
    An entry point provider makes one or more folders available as links that you can access from a central point.
    Please refer to this.
    http://help.sap.com/saphelp_nw70/helpdata/EN/f6/da3340284e7a56e10000000a1550b0/frameset.htm
    In this context as soon as you create an entry point, you can upload site specific/ global content and  images or documents into these folders
    Let me know if you still have any questions on it.
    Cheers,
    Sandeep Tudumu
    Edited by: Sandeep Tudumu on Jul 2, 2008 5:13 PM

Maybe you are looking for

  • How do i get the movies that I bought on iTunes onto my new macbook through iCloud?

    how do i get the movies that I bought on iTunes onto my new macbook through iCloud?

  • Convert  Objects into an XML Document? Possible?

    Hello, Is there a way to convert different objects into an XML File/Document If I create 10 objects and then I want to create an XML Document of these objects,is it possible to do this? Ajay

  • Problems after updating to iOS8

    I would like to point out some problems on my iPad and iPad mini after updating to iOS8. First one is a DISAPPEARING CURSOR when typing. Example: touch Safari - select Google - touch the search bar - keyboard appears....                After typing i

  • Windows Live (Hotmail) Calendar won't display

    When I try to view my Windows Live calendar, it displays the "Loading..." graphic forever and the calendar never shows up. It works in FF 3.6 and other browsers, just not FF 4.

  • Service PO (Urgent)

    If in my construction industry vendor brings the material & also gives service. for eg . suppose interior work. This matl is non stockable. Vendor wants the payment for material first in seperate PO. Can I put the material in service PO? Whether this