View source without checking out?

Is there any way to view the source of a page on my site,
without
checking it out? Quite often I just want to check and/or copy
a section
of code to another file, and I'd rather not have to check the
file out
and then check it back in again each time.
Thanks in advance
Kevin

Browse to it, and use View | Source in the browser?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Kevin Blount" <[email protected]> wrote in
message
news:ed47k5$qn9$[email protected]..
> Is there any way to view the source of a page on my
site, without checking
> it out? Quite often I just want to check and/or copy a
section of code to
> another file, and I'd rather not have to check the file
out and then check
> it back in again each time.
>
> Thanks in advance
>
> Kevin

Similar Messages

Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested i

Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested in upgrading to Windows 7 currently.

There are still retail packs of LR 4 to be found out there - for example, on EBay. It's just important to be careful whether it's a full version, an upgrade, or a student + teacher version. And to be certain it's genuine, and has a serial number which has never been activated before. The serial number that you get with that, should work with any 4.x version of LR, on either MacOS or Windows. And it will almost certainly be heavily discounted compared with the previous price direct from Adobe.
Of course the other way is to upgrade to Windows 7 SP1, which should also be available discounted, and thus eke out the life of an older PC (I personally would not go to Win8 in such a case). Maybe pick up some RAM also, if that's a problem, provided you can do so cheaply (since that will be simply thrown away in due course, when you get a newer PC),
Using LR4 instead of LR5 you do miss out on a few nice features, as well as potentially the Raw support and lens profiles for more recent camera equipment.
LR 4 is obsolete as far as Adobe is concerned. They will not sell a Serial Number for it.

Dreamweaver: how to view file without checking it out?

I have started using the Check-In/Check-Out feature of
Dreamweaver 2004. Sometimes I want to view a .cfm file without
checking it out. I thought the "Get" command might let me do this,
but the file contents don't display. So how do I view the contents
of a checked-in file without checking it out?
Thanks.

I always use file/open, but then again, I have never checked
out a file in my life.

Cannot View Source Without Issuing New Page Request, making FF Totally Useless for WebApp Development.

The question says all there is to be said about it.
This appears to be caused by an over-reaching security policy that has caused nothing but turmoil amongst my development team.
The bug exists somewhere in Mozilla's strategy; You are impeding our ability to reliably test and debug a secure web-app we've been building over the last year. It was frustrating enough fighting with the about:config settings anytime a new version of FF released (every other day recently), but now the issue is compounded.
Pump the brakes guys, you're going the wrong way. We're ditching Firefox-driven testing until you make this right.
Eric

Is this a new issue in Firefox 26?
When I watch for requests using Fiddler, I'm not seeing a second request when I view source for a few example pages, and the response time implies that I'm seeing a cached page. This may well vary based on cache headers or other factors.
One possible workaround until we figure out what's going on with your application might be to view the source of the rendered DOM. Ctrl+a to select the entire page, right-click, View Selection Source.

OSB - CVS Source code check-out to Eclipse (INDIGO OEPE11.1.1.8)

Hi ,
I am facing issue with CVS check-out. I have checkout the source code to eclipse from CVS and created one configuration project in the eclipse and drag and drop the OSB project into the configuration project but eclipse is showing so many errors and not displaying the code in designer mode. Could you please tell me the correct process to set up the OSB project in eclipse with the existing CVS source code, if I am wrong.
sometimes when i do drag and drop to configuration project , getting below error in eclipse :
Problems occurred moving the selected resources.
Path for project must have only one segment.
Path for project must have only one segment.

Hi,
You should be able to follow the document for the new version, check this link, may there is some difference...
http://docs.oracle.com/cd/E23943_01/dev.1111/e15866/developingeclipse.htm#OSBDV1385
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

View source without loading page

I have Javascript off. The page I want to see starts to load, then it redirects to an error page saying I cannot use the site at all unless I turn on Javascript. After this, I don't trust them enough to let them run their Javascript on my machine.

Thanks - I think that's what I was looking for. But it doesn't work here.
I typed
view-source:http://www.auburnschl.edu/pages/Auburn_School_Department/About_Us/Auburn_s_Vision
and it changed to
view-source:http://www.auburnschl.edu/'''resolver/2496178368.20480.0000/route.01/'''pages/Auburn_School_Department/About_Us/Auburn_s_Vision
and Firefox said
The page isn't redirecting properly
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
This problem can sometimes be caused by disabling or refusing to accept cookies.

Is it possible to see SQL in SQL-T without having to check out the mapping?

Hello guys, Is it possible to see SQL in SQL-T without having to check in the mapping? At my work they use SQL-T a lot and in SQL query tab they use a lot of SQL so I was wondering if you can see the query without checking out the mapping? Let me know. Thanks

Hi All, I am facing an issue wherein Decimal value of 0.01 is getting converted to 0.00. Let me brief you about Source-Target Types Source - Flat FileTarget - DB2Powercenter Version - 9.6.1 HF2 Issue - Field in Source Flat file is defined as Number(5,2). Corrosponding field from DB2 Target Table is defined as Decimal(5,2). Mapping is simple straight forward mapping with 1:1 loading from Source to Target. Now, my Source File contain data as below0.010.020.0312.01 When I execute mapping DB2 target Table gets loaded with all records. Value from corrosponding field from DB2 target table is - 0.000.020.0312.01 As you can see, value of 0.01 is getting converted to 0.00 where as all other values are working fine as expected. As a quick fix I have applied to_decimal(source_field,2) before loading into Target. Could anyone explain if this is a bug in Powercenter or there's some other issue. If I think its a rounding issue then how come value of 0.02 is getting processed correctly? Please advise. Thanks,Rajesh Agrawal

Can't check out files from JDEV 9.02.798

Hi,
We are making a project prototype with JDEV (previously we use another IDE). We have put our files in CVS 1.2. We are able to log in, update and add files to CVS. Unfortunately, we are unable to find a way to check out the files. The only option to do this is via FILE>Source Control>Check out project, but we failed..cant find module name. We also try to right click the files > Source Control>...there is no check out option there. Can you guys help us? There is one option we havent done yet, that is FILE>SOURCE CONTROL>IMPORT PROJECT. What happen if we click this? will it add the project file to CVS? Will it overwrite existing project (assuming we have similar project name with previous..)...Thanks

Hi,
The first thing I'd recommend is upgrading your JDeveloper installation. 9.0.2.798 is not a production version of JDeveloper (in fact, it's Release Candidate 2 of 9.0.2). There have been two full production releases since then.
To add files to CVS as a module, you should use the Import Project command. This will prompt you to enter a module name. After importing your module, you can check it back out (to a different directory) using the Check Out menu, and specifying the same module name you used in Import Project.
There were some specific issues with JDev 9.0.2 and module recognition in CVS - if you're still having problems, upgrading to JDeveloper 9.0.3 is definitely worthwhile to pick up the latest features and bug fixes.
Thanks,
Brian
JDev Team

Portal check out record does not check in when MDM workflow is active

Hi Experts,
We are using portal as front end for the MDM material creation/update.
when a user tries to edit a material via portal, the record is checked out in mdm and once the record update is done and submitted that particular record will be checked in. this is normal process and automatic in nature till date.
However, we have created a simple workflow in mdm, we havent checked out records in start step of workflow.
So it normally executes without check out /in via MDM Workflow.
workflow triggerring action = record import, record update, record add.
when i edit the material vai data manager WF triggers fine and all is well.
However when i edit the material via portal, record is checked out (which is normal) and once record is submitted, the workflow in mdm is triggered successfully.
Workflow ends with all necessary syndication's and validations and ends successfully, But after this the record still remains as checked out? ???
ideally as mentioned above (in bold) once the user completes editing the record and submits it, the record should be checked in, but this is not happening!!!
Please let me know why is this happening.
Please help.
Regards
Eva

Hi Eva,
That is useful.
Analyzing this issue I came across SAP note 1740194-Record remains in exclusive lock after workflow is completed.This was an issue observed in SAP MDM 7.1 SP08.
It gives a workaround -
The workaround is:
The owner of updating has to click on the modified record in Data Manager after workflow completed. The original modified record will be unlocked.
Ofcourse,resolution would require an upgrade.
Thanks,
Ravi

Check out ESS source code

Hi Experts,
EP7.0 SP11 ESS1.0 ERP2005, NW2004s.
NWDI is installed successfully and two tracks are created according to the NWDI cookbook for ESS. Development configuration is imported into NWDS. Here our NWDI DEV system is used as local J2EE engine in NWDS for local test purposes.
I also created a project under <b>InActive DCs</b> views in NWDS. In the web dynpro perspective I could see the source of the applications (ex. DC ess~ben). I have read in the forums to check out the source code. Here I do not see any option to check out!! where will I see the option?
when a new project is created in Inactive Dcs view, it should ask for creating an activity, but this did not happen!! should i create a activity in DTR perspective?
it seems to me i can make the changes in the inactive dcs and then activate them later and deploy into local j2ee engine (here NWDI DEV) for test purposes. Is it ok?
Regards!

Hi,
WebDynpro should automatically check-out source files if you want to modify something.
If you are not asked for an activity: Or you logged on? You didn't accitdentally check the checkbox "keep local for now" when creating a new DC? Or do you have an activity that is marked as default activity so the NWDS automatically added the files to that activity without an explicit dialog?
Making changes, activating them later and deploying locally built (inactive) deployables into a local/test J2EE engine does make perfect sense to me. You are testing before you commit your changes and publish them to you colleagues (to switch language a bit). Sounds OK to me.
Regards,
Marc

Visual Source Safe VI checked out but cannot edit

I am using LabView 7.1 and Visual Source Safe (VSS). Previously, I have created several VI's and used VSS to manage them without a problem. I received a VI (and sub VIs) from another company location -- I copied them into my local directory -- and copied them from there into VSS.
I then check out the files (using VSS or using LabView|Tools|SourceCodeControl ... I have tried both) but I am not allowed to edit the VI -- all I get is the "operate" cursor. VSS shows the VI as "checked out". My local directory shows that the VI file does not have the "R" attribute (read only) set. So I should be able to edit the VI, but I cannot. ????
If I try to use LabView|Tools|SourceCodeControl to check the file out again ... I get an error, stating that I already have the file checked out, and I cannot check it out again. LabView seems to "know" that I have the file checked out, so what might be preventing me from editing it? [I tried different settings in the tool palette, but regardless of what is set, I only see the "operate" cursor when I try to work on the VI.]
I am relatively new to LabView, and have only been using it with VSS for a couple of months now . . . . so it could easily be something simple that I am overlooking...

Hi Rich,
I'm happy that your issue was solved.
Now, for the suggestion about placing the "Change to Edit/Run Mode" in the "Edit" menu - that DOES sound like an intuitive choice. However, I can also see the logic in having the menu item under the "Operate" menu - for choosing how to operate your front panel and block diagram.
I would recommend you (and anyone else with good ideas) to submit your Product Suggestions through the 'feedback' link on www.ni.com/contact. Our R&D team will then look into the possibilities of implementing the feature in future versions of LabVIEW.
We appreciate your ideas, thanks.
- Philip Courtois, Thinkbot Solutions

Has anyone checked out the latest iTunes update where you are supposed to be able to view your wish list from your music library?

I updated my iMac yesterday to check out this new feature, but I can't seem to figure out how it works. Can anyone tell me how to view my wishlist from my music library. I restarted my computer, but that didn't work either. I'm obviously missing something. Otherwise, accessing my wishlist just works like it always did. I would appreciate some input on this.

Here are several screenshots from my iTunes Library...

Visual Source Safe keeps checking out my .cs file associated with a report

Hello there.
I am new in this community and I need some help. I am part of a team that works with Crystal Reports under .NET framework and we are using Ms Visual Source Safe. Any time we open a solution (.sln file) all .cs files associated with a Crystal report are checked out. This, of course, drives all of us crazy. If I try to delete the .cs file, it is added automatically. And we could not find any solution to this problem.
I compared the 2 .cs files (before and after check out) and the indeed differ. The namespace , to be more specific is different.
I believe the problem is that we are using a separate project that contains the report files and then those .rpt files are added as links to the main project.
So ... my question is... is there anyway I can tell Sourcesafe or Crystal report or any other program, application or person to stop checking out my .cs files or stop modifying them?
Thank you.

Hello Don.
Thank you for your answer.
It seems I have SP1 already installed. I am referencing the following files with versions in my report project:
CrystalDecisions.CrystalReports.Engine v12.0.2000.0
CrystalDecisions.Enterprise.Framework v12.0.1100.0
CrystalDecisions.Enterprise.InfoStore v12.0.1100.0
CrystalDecisions.ReportSource v12.0.2000.0
I personally believe that the problem is with the link files.
To be more exact, I have several projects (csproj) that handle all reports and report loading. I also have several applications that refer these projects (not all in the same time). Because all .rpt files are loaded at runtime, I made these files Embedded resources and I created a folder in the main projects named Reports where I added all .rpt files as links.
When I open main application A solution, all .cs files associated with the .rpt files are checked out (the namespace is modified to A).
When I open main application B solution, all .cs files associated with the .rpt files are checked out (the namespace is modified to B).
And so on.
And since we are a team of several developers working with all main applications, this is rather annoying.
I hope this presents my situation a little more clear.
Any ideas?
Thanks again

I can't check out all the WD sources in NWDI

Hi Experts
I have this scenario:
I developed some Web Dynpro development component and check in in DTR.
Another developer check out this DC and start to developed some change and increase objects in this DC.
This ojects is: 1 EJB Model, some code in controller, some new Nodes in controller and in view.
Then he check in his changes
Now when i sync my project with DTR, just some changes was gotten from DTR like the new model and a view,
but the code in controller and the new nodes in controller didn't change.
Can someone give some solution to this issue?
Regards
Marcos

Hi,
After checking in the activity make a habit of activate the same activity.
Ask the other person to activate his activity.
After the activation of all previous activities. sync the dc it should effect the changes to dc in your nwds.
If the above procedure doesnot work then delete the dc from workspace and nwds. goto dc perspective->sync your project in inactive dc's>create project from inactive dc's, this will create the dc's in your nwds will the current changes in edit mode.
Regards,
Kiran Kumar

CR files are automatically checked out (with Visual Source Safe 2005)

Dear CR Support,
i have a strange problem. Every time i open my solution in V.S. 2008 (V.B.) all my CR files are checked out automatically.
I must do "Undo Check Out" every time.
I Use:
Visual Basic 2008
Crystal Reports 2008
Visual Source Safe 2005
For any extra information, please let me know.
Thank you in advance.
Best Regards,
Navarino Technology Department.

Dear Don hello,
sorry for that.
I have made some tests and i notice the followings:
I'm working in a CR file in design mode. I make the changes that i want, i click save and then "Check In" in order the changes to be saved in VSS. If i Don't "close" the CR File (the open tab of Visual Studio) the CR file stays "Open" in design mode. If i right click over the tab of the CR and click "close", the CR closes. This is what i mean "Open" and "Closed" file.
- When i open the solution with the crystal reports files open (design window open), the files are checked out automatically.
- When i open the solution with closed the reports, i have no problem. But if i try to open (in design mode) the crystal reports files, the report is checked out automatically (this is not happening to all reports).
I will try to reinstall the SP2 again.
Is there any newer Patch after the SP2, in order to install it?
Thank you for your reply.
Best regards,
Navarino Technology Department

View source without checking out?

Similar Messages

Maybe you are looking for