View Standard tabs in BP

Hi Experts,
I have a requirement to view standard tabs on BP transaction which are not visible.
For Eg:
While Creating Business partner with role as (BP General) I could see the following tabs :- Address , Address Overview , Identification , Control , payement Transaction , Long text , Marketing Attributes ,Status , Documents tabs respectively.
But while creting Business partner with role as (Finincial Services BP ) I could see differenet set of tabs.
My requirement is if there is a tab name Ratings available on (Finincial Services BP ), I want that tab to be visible on ( BP General screen), i.e I want Ratings tab to be also visible on BP creation screen when the role in (BP general).
Please letme know the respective SPRO settings or is there some other settings which I am supposed to do.
Help will be appreciated.
Thanks and regards
Sourabh Verma

Try this ..
IMG-Cross appli compsap bpbpbasic settingscreen config.

Similar Messages

View standard tabs in BP transaction

Hi Experts,
I have a requirement to view standard tabs on BP transaction which are not visible.
For Eg:
While Creating Business partner with role as (BP General) I could see the following tabs :- Address , Address Overview , Identification , Control , payement Transaction , Long text , Marketing Attributes ,Status , Documents tabs respectively.
But while creting Business partner with role as (Finincial Services BP ) I could see differenet set of tabs.
My requirement is if there is a tab name Ratings available on (Finincial Services BP ), I want that tab to be visible on ( BP General screen), i.e I want Ratings tab to be also visible on BP creation screen when the role in (BP general).
Please letme know the respective SPRO settings or is there some other settings which I am supposed to do.
Help will be appreciated.
Thanks and regards
Sourabh Verma

Hi,
For thsi go to transaction SPRO. Follow the path Cross application components -> sap business ppartner -> business partner -> basic settings -> define bp roles.
Here double click on the role and click on hide flag.
Smita.

Wide report causes standard tabs in two-level-tabs to move

I know that sounds odd. So, if you have a large (wide) report, that spans the browser window, and you resize the window, the tabs will move to the right, eventually right out of the window. Very odd.
I have Apex 3.0.0.00.20. I have a simple report region with a query that has over 20 columns. The data isn't really meant to be read, there is a download to spreadsheet link that people will use. However, there is also a two-level tab system in place. Parent tabs at the top (on the right) look fine. The standard tabs, below are left aligned and look good on all pages except this one. If the window is wide, fitting the entire width of the report, then the tabs align on the left. That is very wide, filling up more than my widescreen monitor on my two-monitor setup. For users on a single smaller monitor, they cannot size it that large, and if the window is narrow enough, the tabs are actually off the screen. You have to scroll right to see them. It's the strangest thing. But, it's a pain, since they need to use these.
Anyone see this? Any ideas how to prevent those tabs from moving and staying anchored on the left?
Thanks

Sounds like the result of a layout based on nested tables, which are expanding to accommodate the wide report content.
Solution would be to move the standard tabs region or the report region to another region position, or change the page template so the tabs current region position is not contained within a table that also contains the table containing the report region position.
This should all become clear if you view the page in Firefox and outline the tables using the Web Developer Toolbar...

Can't grasp the relation between tab set, parent tab, standard tab set and standard tab

Very novice to apex application building, but after trying to figure the concepts behind the tab sets I'm getting more and more confused about it as I always get different behaviour when changing things.
The documentation is not very clear on this.
Is there someone who can explain this in a comprehensive way?
It would be nice to have a view on the consequences of using these different levels of groupings.
Any help will be dearly appreciated ;-)

Jan
One level tab application
Tabsets are used to group standard tabs.
Use full when splitting up the application in different sections. Much like how the apex is split up in the application builder, sql workshop, team developend and administration.
Parent tabs aren't used. And a one level tab application can't be turned into a two level tab application.
Two level tab application
Parent tabs belong to only one tabset "main".
The standard tabset is the connection between the parent tab and standerd tab.
There is one standard tabset for every parent tab.
The standard tabset in the two level application has the same function as the tabset in the one level application.
The standard tabset also determines when a parent tab is current.
When on the page the setting Standard Tab Set is set then the parent tab belonging to that standard tabset is current.
This means that if you change a page form one parent tab to an other you not only need to change the tab settings. But also the settings on the page.
If you still in the position to choose between list or tabs as your main form of navigation I would recommend using lists.
The possibilities with the list templates are greater that with tabs.
Tabs have a maximum of two levels. List don't have such a limit.
If you created your application as a one level tab application you can't turn it in a second level application without some serious hacking.
Clicking on a standard tab submits the page and branch after the computations. This could also be viewed as a pro for tabs because with list navigation your page needs to be accessible by url. Did isn't necessary with standard tabs making them more secure. Parent tabs also use an url to navigate.
Only the standard tabs belonging to the current standard tabset are rendered making a drop down menu impossible.
Hope this clears up some of your questions.
Nicolette

Is there any way to view two tabs at the same time w/o opening a new window?

I would like to view one tab while I am working in another. I can do it by opening one of the tabs in a new window and tiling both windows on the screen. Is there any way to do it within one window?

Just installed Split Panel and it looks like it will do exactly what I want.
Thanks,
(Don't know how this got in here twice. I'd like to delete it but can't figure out how to.)

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

There are more than one Applications folders. At the root level of your system is an Applications folder for all users, where most installations go. Every user, including you, also has a separat Applications folder.
Check all of them.

Without EEWB Is it Possible to add field to standard tab

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding field to standard tab. Any body can help out in this.
URGENT
Thanks
vikram.c

Yes it is possible, but we are talking a modification of SAP standard here. Also the effort needed will be at least 10 times higher than using EEWB as you have to reprogram all generated code / screen helps that SAP provides. Moreover these fields are then still not exchanged with the interfaces / BDocs etc which will be also some more days of work. There is no usable documentation on this - at least not by SAP and I am not aware of another one. It is much easier to create an EEWB enhancement and then move the fields from one tab to another.
Doing this all by hand is like adding a second processor to an existing motherboard for more performance compared to exchanging the existing one with one of higher specifications.This is possible, but requires a) more work/time/material b) more experience c) you lose warranty d) in the end you do not know for sure what the outcome will be
Regards, Kai

Sap r/3 rel 4.6c - F-03 Process open Items Column Width standard tab output

Hello All:
I use SAP R/3 Release 4.6C. I am learning how to use the F-03 Clear G/L Account function. On the front page of F-03 you enter the account number and then click process open items.
The output comes on the screen in the "standard" tab. In this tab you may start to clear your items.
My question: How do you change the width of these columns? I know you can change the column width by moving the column margin with the mouse. I want to know how to change the column width permanently - make the column a "fixed" width that will not change unless I change it.
Do you know which variant I need?
thx
Tracy Lofstedt
Western States Equipment Co

Hi Tracy,
You've posted your question on one of the SAP Business One forums which is not related to R/3. I recommend you repost on one of the R/3 related forums, a list of which can be found here:
https://www.sdn.sap.com/irj/sdn/forums
Kind Regards,
Owen

Is it possible Without EEWB Adding filed to standard tab.

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding filed to standard tab. Any body can help out in this.
<b>
URGENT</b>
Thanks
vikram.c

Hi
Copy sandard table to Ztable then make it change mode . Then add new field...
Thanks
Sasmita

Columns' positions do not match in pdf form compared to the "View Response" tab in Form Central

I think I understand why this happened. And I am loookng for workarounds.
For example, let's say in the beginning you have five fields (A, B, C, D, E) in your form. Later on, you decided that you need to add two more fields says A1, and C1, and now the fields are as follow A, A1, B, C, C1, D, E. After you submitted the form to Adobe Form Central, you take a look at the "View Responses" tab, and you realize the order of the columns are as follow A, B, C, D, E, A1, C1.
I believe this happened because the new fields A1, and C1 were added later. But I am wondering what are the workarounds?
Thanks in advance.

Yes, it does work in Acrobat Reader. I'm just trying to determine if this is a recent bug in Tiger (like maybe because of the 10.4.9 update) or if it's something related to the particular version of Acrobat the file was created in.
I haven't had to have Acrobat Reader on any of my Mac's since Jaguar.

How to assign custom tab field value to corresponding standard tab field value.

Dear friends,
I want assign a field value ( advice code , advice code description ) in a custom tab to corresponding field value in standard tab (advcode ,). in me51n.
following screen shot are given below

Hi SK,
It looks both the tabs are custom ones. In that case, you can either use Export/Import statement or you can use Set/Get Parameter ID for setting value.
If one is standard subscreen, you can export value from custom subscreen and use line item level user-ext/enhancement to assign the value on standard subscreen.
Hope this helps.
Regards,
Naveen

Is there a quick trick to view a tab's full length label in iPad iOS Safari?

Is there a quick trick to view a tab's full length label in iPad iOS Safari?

I have ipad rotated for landscape viewing, but with just a few tabs open much tab real estate is dedicated to showing ellipsises, is there no way to view a full tab label w/o closing tabs--that really defeats the whole notion of tab browsing?

Error viewing variables tab after running edit UI

Hi,
I have a problem that seems to be somewhat like this:
http://forums.ni.com/t5/NI-TestStand/Error-viewing-variables-tab-in-Runtime-Operator-Interface/m-p/1...
The VI I am trying to run is an edit substep of a step type. LabVIEW checks to see if the "Step.Setup.ReadMeasName" property exists, populates a listbox with it if it does. Another listbox with all the available measurement names also appears on the UI. The user has an Add and Remove button to remove measurements from the "ReadMeas" listbox or add them to it from the "MeasNames" listbox. Multiple names can be added/removed at once depending on whats selected when the buttons are pressed. Once "Done" is clicked the VI writes the"ItemNames" property of the "ReadMeas" listbox to "Step.Setup.ReadMeasName", using a Set Property Value node which is passed the TestStand Sequence Context. If the property doesn't exist it creates it.
The only time I have any problem is when I try to remove items from the property after it is already initialized (i.e. not empty). In other words, if I run the VI from teststand, put several measurement names into "ReadMeas" click done, run the VI again (the names already added appear in the box when the UI comes up, LabVIEW reads "Step.Setup.ReadMeasName" ), and then remove some of the names. IF I had "ThisContext.Step.Setup.ReadMeasNames" opened in the step "Variables" tab when trying to remove the names this message appears in the Variables tab: "One or more errors have occurred. Please Save your work and restart the application." If I make sure not to have "ThisContext" expaded in the variables tab, but check the property before and after removing names from the list it does work properly and there is no error.
This isn't a big deal becuase I doubt the end-user will be checking to see that the property actually got populated, but I still would like to fix the bug if possible. I've installed the patch for TestStand 2010, and the .Net framwork 4.0. Anyone have any idea what could be going on here?
Thanks,
-Josh
Solved!
Go to Solution.

Josh -
It looks like you're running into a Known Issue 193751, which is documented in the TestStand 2010 and 2010 SP1 Known Issues List. This is an issue that we intend to fix in a future version of TestStand.
I hope this helps and am sorry for any inconvenience this issue may be causing you.
Manooch H.
National Instruments

Add custom fields to standard tab in BP

Hi ,
I want to add a new field in address tab in communication area.
I tried doing through EEWB but the transaction creates a new tab and adds the new fields.Can anybody suggest how to shift the custom fields from the new tab to standard tab.
Many people have suggested BUCO transaction but it would be great if anybody can give the steps to do the same.
Thanks and Regards
aarthi

Hi Aarthi,
You can acheive your requirmetn through BDT tool. Have a look of the link <a href="http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm">BDT</a> , This might help you.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Google Key Length and Standard Tabs

OK, here's a 'fun' one for a Monday morning. I am using APEX 3.2.
I have an application where we have an OpenLayers Google map in a region on a page of the application. The map works fine within the application. The problem I am having is, the standard tabs won't work for that page with the Google Map on the page. When we try to click on a standard tab (in Firefox) we get this message:
Bad Request
Your browser sent a request that this server could not understand.
mod_plsql: /mrrp/wwv_flow.accept HTTP-400 Bad parameter name: 46 exceeds limit of 30 bytes
The standard tabs also don't work using IE but the error message is only 'The webpage cannot be found" (real helpful...).
After working on this issue, it appears that it has to do with the length of the Google Key for the map. Here is the link for the Google key:
http://maps.google.com/maps?file=api&v=2&key=ABQIAAAAcrd1edlMGEgG5i0uaAFzhBRez-M17v_uUlrf3pDwt5LPqfSb2RRpnazvdHjqtzEcIBDO4PB53HWnFQ
When I take the key portion out of the code, the Standard Tabs work correctly. FYI, in either case, the parent tabs work correctly.
I have tried creating an application item for the Google key, so the actual code just shows:
<script src="'||:GOOGLEKEY||'" type="text/javascript"></script>
That doesn't appear to help.
I hope I have explained the issue clearly. Any help would be greatly appreciated.
John

Check parameter sec/rsakeylengthdefault. More info in note 509495.
Cheers

View Standard tabs in BP

Similar Messages

Maybe you are looking for