View the changes in iSync?
Hi,
The sync works perfectly with my Motorola RAZR.
But is there a way to see what are the changes being applied?
E.g. when I get a message one new contact added...how do I see which contact is being added?
Thanks.
Rather than add on to an existing, unrelated thread, you should post a new thread regarding your issue. Most users are not going to relate View the changes in iSync? to an inability to synchronize a Motorola RAZR V3 with iCal using iSync.
Only iSync 2.4 requires Mac OS X 10.4.9 at a minimum: no version requires Mac OS X 10.4.10. The version of iSync used with Mac OS X 10.4.7 and 10.4.8 is iSync 2.3, and would have been upgraded to that level from iSync 2—with either an appropriate Combo update application or use of the Software Update mechanism—when bringing your reinstalled Mac OS X 10.4 base configuration to either Mac OS X 10.4.7 or 10.4.8.
An appropriate reinstallation of Mac OS 10.4—coupled with an upgrade using the Mac OS X 10.4.7 or 10.4.8 Combo update appropriate for your processor type—is the easiest and most effective means to 'restore' synchronization using iSync 2.3.
The V3m may well be supported by iSync, though not explicitly. The list of supported devices includes these:
• Motorola RAZR v3 (GSM)
• Motorola RAZR v3i
• Motorola RAZR v3c (5)
• Motorola RAZR v3x
The (5) flag points to a note that states this about the V3c model closely related to your V3m: "The Verizon version of this phone does not support calendar synchronization." So, if your model has been provided by Verizon Wireless, that may also be an issue. (You did not identify your carrier or specify from whom you obtained your V3m mobile handset.)
You may also be able to find a solution in this forum by searching for the string "V3m" in the search box in the upper right corner of each forum page.
Related information can be found using this Google search string.
Similar Messages
-
How to view the changes immediately after a jsp is modified?
Hi All,
How can I modify a JSP and view the changes immediately
without packing a war and deploying again.
The JSP may reference a tag library.
And also, I don't want to register the compiled jsp class
as servlet class in web.xml because there are hundreds of
jsp files.
Then, how can I do this to save the development time.
Any suggestion is appreciated.
Thanks!!!
Kammau
Hi Kammau,
the next thing you should do is:
- create a standard EAR (jar, not "exploded"), with application.xml,
manifest entries, etc.
- try to deploy. If you can't deploy this way, you still have some
problems which have nothing to do with the jsp-reload-thing. Solve them
first. (You can ask us, of course)
- if it works, try to deploy the EAR "exploded" with "exploded" WAR in it.
- if that works, try the jsp-reload.
Good luck,
Philip
Kammau wrote:
> Hi All,
> I try to deploy my jars (local ejbs) and my jsps separately.
>
> I have tried two ways, but all fail.
> 1. I create a app directory under my server directory (same as DefaultWebApp),
> and put all the jars and the war (exploded) under the directory. Then I add the
> script in the config.xml likes:
> <Application Deployed="true" Name="myApp" Path=".\config\mydomain\applications\myApp">
> <EJBComponent Name="myJar1.jar" Targets="myserver" URI="myJar1.jar"/>
> <EJBComponent Name="myJar1.jar" Targets="myserver" URI="myJar2.jar"/>
> <WebAppComponent Name="war" Targets="myserver" URI="war"/>
> </Application>
>
> //myJar1.jar and myJar2.jar are my jars and I put all jsps under the war directory.
>
> Unfortunately, it fails.
> I found the weblogic tried to deploy the jars and war, but both of jars and war
> can not be deployed.
>
> 2. I put the jars into a ear and I also create the
> app directory under my server directory (same as DefaultWebApp), and put the
> war (exploded) under the directory. Then I add the script in the config.xml likes:
> <Application Deployed="true" Name="myApp" Path=".\config\mydomain\applications\myApp">
> <WebAppComponent Name="war" Targets="myserver" URI="war"/>
> </Application>
>
> Unfortunately, it fails.
> In this case, I can deploy the jars, but when the weblogic tried to deploy the
> wars, it can not find the jndi names of my jars.
-
Hi All,
How to view the change immediately after a java file that is used in jsp is modified
without restarting server or redeploy?
Moreover, it is better to keep the original session.
Any suggestion is appreciated.
Kammau
Hi,
In order to have a new version of a java class, the current classloader must be
deleted and a new one created. This is what redeployment does. I believe that
this is more of an issue with Sun's implementation of classloaders. You could
ask BEA support (719.232.7878) and see if they have any plans to periodically
check jar files to see if java class file timestamps and destroy and re-create
classloaders on the fly.
1) You will still have to accept the performance hit of destroying classloaders
and creating new ones. There isn't any way around that.
2) I would think you would want to have more explicit control in production and
integration anyway.
You can redeploy applications from the command line (script) file not just the
console.
Hope this helps,
pat
"Kammau" <[email protected]> wrote:
>
>Hi All,
>How to view the change immediately after a java file that is used in
>jsp is modified
>without restarting server or redeploy?
>Moreover, it is better to keep the original session.
>Any suggestion is appreciated.
>
>Kammau
-
Can we view the changes of a role, happened in pfcg,through grc?
hi Pls give me reply to this question
Hi Jeevan,
I think you are asking about the PFCG change history. Of course we can. From GRC 10.0 navigate to Reports & Analytics-> Role Management reports->click on the link PFCG change history. In the popup page select your System (ERP backend) & Enter your role name(for which you want to see the change history. Click on PFCG History. In the next pop up ( SP GUI login) enter the credential of the user, that has pfcg authorization in the ERP backend. Finally click on the execute button in the SAP screen. Now you'll be able to see the change history of the role. In fact from GRC it calls the respective ERP system and executes the report "RSSCD100_PFCG". Directly you can also go to the ERP backend" and execute the report in "SA38".
Thanks,
Guru -
No view of the changes of Customer /Vendor master data
Hi Experts,
I have a problem, when I run the standard report to view the changes of customer/vendor master data, I don't find the change relative to a bank account .
I found in the report the technical field that the user has changed, but I haven't found the text of the data in the tab "bank account".
Can you help me, please?
Thanks in advance.
Best regards
GiampaoloDear Ram,
thank you for your answer , but my problem is still present. If I want to see the modify of the Customer/Vendor Master Data for the Payment transaction Data details, I don't try this information in the TCODE FD04.
Do you know a different report or TCODE that I can use?
Thank you in advance.
Best Regards
Giampaolo -
Hi,
The MM core team member earlier was able to view the changes in the material master in mm04, then recently he is not able to view the changes in the materials.
What could be be the probable reason?
ThanksHi Nilesh,
The authorization for MM04 has been removed from the user id.
With the help of your Basis team you can provide him back the same auth.
You can also check the authorizations in SUIM t.code.
Cheers
Arun. -
Viewing log changes in DBTABLOG
Hi.
I need to have a change log of a custom table. I am trying to use the transaction SCU3 to view the changes.
SCU3 -> Comparison: History <> Current
I have checked the 'Log Data Changes' checkbox for the custom table in the technical settings. The parameter rec/Client has been set to the value of the client in use.
When I try to execute the transaction, it gives an error message saying "Table not found", even though I am able to locate the table name in the list that can be viewed using the list of input options.
Could you help me to resolve this error?
Thankyou very much for your help.
Sheril.Teresa,
It is possible - if change document logging is turned on. In SCM, the system is delivered with the logging turned off. You must explicitly turn it on in order to be able to review changes.
Product master changes can be reviewed in transaction /SAPAPO/PROD_CD_READ. Do not leave product or location blank, use asterisk instead for 'wild card'.
If nothing is found, then logging is not turned on. You can confirm by looking at table CDHDR, where the change data is stored.
To turn change recording 'on', IMG > APO > Master Data > Product > Activate change documents.
Best Regards,
DB49 -
Portal Desktop & Display Rules - Not able to see the changes made.
Hi All,
I had created a new theme for the portal. I had also created the rule for the new desktop with the IF & THEN condition.
IF user = KT1137
THEN portal desktop = pcd....(full path)
after that, when I am logging into the portal with the above given id, I am not able to view the changes.
what could be the possible reason? Thanks.
Regards
Chander KarariaHi,
Make sure that there are no
if *
then
conditions above your if condition.
so that, your rule should look like this:
if user=your user
then desktop=your desktop
if user=*
then desktop=...;
Regards,
Srinivas -
Respected,
How could I know if some changes are made in configuration part and by which user it has been done .Is their any path or transaction path to have a look at the changes .
THASNKS AND REGARDS
AVANISH GULATEEHi ,
You need to aks the basis team to activate "change log" to view the changes done . Please note that activating the change log requires a lot of pressure on memomry usage and basis team have to take a final call on that. But once done , all the changes can be viewed using what Kahled had replied .
Regards . -
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Why did my calendar view suddenly change in iCal? I've been using ios7 fôr a few weeks now with no problems. Suddenly, without any updates or anything, the calendar view changed and I can no longer view it as a list without having the entire month seen as well.
Hey Gattypyle,
Thanks for the question. You simply need to go back to Day/Week view, then tap the list-view icon once more.
Calendar at a glance - iPhone
http://help.apple.com/iphone/7/#/iph3d110f84
View a list of events. In month view, tap to see a day’s events. In day view, Tap the to view a list of events.
Thanks,
Matt M. -
I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!
Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT -
Dear All HANA Studio Experts,
I'm using SAP HANA Studio Version: 1.0.68 in our current landscape and looking for a expert and intelligent solution for a problem that we have encountered recently.
We have created multiple AT views, AN views and created CA views on top of these AN views to cater different LOB related to our organization. We have also designed BO universe on top of the CA views from HANA and finally created webi reports out of these universes.
In a particular scenario, we have one AT view which is been used by 10 different AN views.
Now we had 3 Requirements like below:
1. To add a new field in this AT view,
2. To update an existing field in this AT view and
3. To remove a field from this AT view which is not required anymore.
Problems Encountered:
Req 1. When we added a new field (e.g. XX_ADD) in the AT view and activate it, its throwing warning that there are dependent objects on this AT view. However no error thrown and it leads to re-work to check if this new field is available in all those dependent views and re-deployed those all.
Question: How to ensure if this addition of object will not impact the rest of the dependent views?
Req 2. When we updated an existing field (e.g. XX_UPDATE_NEW) in the AT view and activate it, its throwing warning that there are dependent objects on this AT view. However the BO reports built on top of these different dependent AN views became inoperative.
Question: How to ensure if we need to update the name of an existing object it will not impact the rest of the dependent AN views?
Req 3. Finally we have removed one object from the existing fields as it is not required. Again we faced warnings that there are dependent AN views on this AT view.
Question: How to ensure if we need to delete an existing object, it will automatically reflect in all dependent AN views?
Please suggest, if it is a good practice to create separate AT,AN and CA views for each of the LOB's and avoiding any dependent views (hence gradually the total no. of logical objects will be increase) or to reuse the AT/AN views whenever possible and in case of any updation/deletion we need to do a huge rework to check and redeploy the dependent objects again and again?
Thanks for reading this detailed explanation and please let me know in case you need any other inputs....don't hesitate to share your expert thoughts on this.Hi Avishek,
Are you using Development or Modeller Prespective?
Avishek Chakraborty wrote:
Now we had 3 Requirements like below:
1. To add a new field in this AT view,
2. To update an existing field in this AT view and
3. To remove a field from this AT view which is not required anymore.
1) Adding a new Field in the AT View and after activating the view. Then you have to Refresh/Check out the dependent views to see if it is reflecting.
2) We cannot update the existing field in the AT view i.e like name change if it is being already used in joins in any of the dependent views. It will not allow you to activate
3) To remove the field which is not being used any where, we can make the changes in AT View and Refresh/Check out to see if the dependent views are reflecting the change
Regards,
Krishna Tangudu -
According to a web and support forum search, myself and another person, Chloe in the Dreamweaver Club forum, have ever reported this. Trying to follow along a Lynda.com tutorial, and the instructor isn't getting this error. Can't imagine why it's happening. I'd be very grateful for any help. I'm also getting an error dialog message:
DIALOG BOX:
While executing onClick in InsertFGDiv.htm, the following JavaScript error(s) occurred:
At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CC 2014.1:Configuration:Commands:InsertFGElement.js": The object is not currently contained in a document.
This appears at the top of the screen:
Couldn't commit the changes made in Live View. Refresh the Live View and try editing again. [Refresh doesn't do anything.]Try the suggestions here -
Index to Dreamweaver FAQ
The solution for Javascript errors is likely the one. -
When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?
Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Maybe you are looking for
-
How do I remove backup files from desktop
I am having difficulty removing backup files that are locked from my desktop that I transfered from a backup external hard drive. It starts to delete but whern it gets to 0 it rewrites the file. this happens evn after I answer "remove all locked file
-
hi all i want to display the status of production order (latest) in my report for each production order...can somebody help me with the names of tables and fields help please.....points wil b rewarded. thanx.
-
IPhoto update from iLife06 won't open HP Scans. Help?
I decided to install iLife06 and had instant problems. I have a 2.5 Dual G5 running 10.3.9. and am using an HP 4890 scanner. Prior to installing the iPhoto update as part of iLIfe06, everything worked fine. I would scan a photo and transfer it to iPh
-
How to include other web page in servlet response?
Is there any way how to include the contents from some other web page in my own response? For example, I wish to printout some text and below that to put the complete contents of let's say Google's page, so something like: include("www.google.com");
-
Null Pointer when fetching VARRAY / OBJEC TYPE
Hi, i'm trying to fetch a VARRAY, containing an Obeject Type consisiting of two NUMBERS (see scripts below). Now i used JDeveloper to generate corresponding Java Klasses. What i'm trying to do is this: String SQL = "select quantityprice from ts_trans