View the SQL code

Hello,
I'd really like to see the SQL code generated for a webi request in XI version 3.0. Could you help me please ?
In webi XI R2, you have a little button "i"sql that open the windows with the code (from the request) ; I find this functionality quite practical to look for a bug !
Thank you for your answer,
Regards,
Camille

Hi Camille,
If it is built over a Relational DB eg Oracle and you have the permission granted then you should be able to see the SQL Viewer button.
If your universe is connecting to a OLAP Cube, SAP BEx query or anyother data source based on MDX then it will not be available.
If this is not the case for you I would report it as a bug.
Regards
Alan

Similar Messages

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to view the source code of JavaFx component ?

Hi everybody,
I just want to know if it's possible to view the source code of the component Button (from JavaFx) and how to do it ?
In fact, I don't really understand if JavaFx is entirely open source ?
Thanks.

I lack time right now to experiment, but I think you can get your goal just with CSS.
Here are the variables I found for Button:
Button
borderFill: class javafx.scene.paint.Paint = (null)
button: class javafx.scene.control.Button = Button
colorBrightness: Float = 0.8156863
cornerRadius: Float = 7.0
fill: class javafx.scene.paint.Paint = (null)
focusFill: class javafx.scene.paint.Paint = javafx.scene.paint.Color[red=0,green=147,blue=255,opacity=1.0]
focusSize: Float = 1.4
highlightFill: class javafx.scene.paint.Paint = (null)
label: class javafx.scene.control.Label = LabeledImpl [id=-Label]
paddingBottom: Float = 4.0
paddingLeft: Float = 10.0
paddingRight: Float = 10.0
paddingTop: Float = 4.0
shadowFill: class javafx.scene.paint.Paint = (null)
textFill: class javafx.scene.paint.Paint = (null)
textFont: class javafx.scene.text.Font = Font[name=Verdana, family=Verdana, style=, size=11.0]Try changing cornerRadius and focusFill/highlightFill, etc. Note that some discovered properties are not affected by CSS... Perhaps that's why there isn't an official doc about CSS styling currently.

Is there anyway that I can view the program code behind the vi diagram?

e.g. to view the vi code in C++ instead of G.

G is translated into assembly code directly.
There is no low level language like c needed.
So there is nothing to view except assembly coding.
greetings from the Netherlands

How to view the sql behind a report.

Hi All,
i am using OBIEE 10.1.3.4.1. while running a report its showing no result. There is something wrong with the join I guess. But still I need to see the sql it generates.
In NQQuery.log its not updating the sql that I am running a report in answer. How Can I view the detail sql behind the report? Is any more settings to do for view the SQl...
Thanks in advance,
Deepak.

Hi Deepak,
go to Settings > Administration > Manage Sessions from front end..
You'll find view log option related to the report you run..
Make sure that you've set loglevel greater than equals to 2 for the logged in user(in rpd level)

W3_PUBLISH_SERVICES and dump while viewing the source code in se80

Hi,
external ITS6.20 on SAP R/3 4.7
we have installed ITS and we published the templates. When we published the teampltes using the standard prgram   W3_PUBLISH_SERVICES, and around 43 of the services fail Not sure if this is an error
After the upgrade is finished, you must make this up, before you can use the Internet applications of the system. For a detailed procedure description see Note 399578.
or not.
On the other hand when i go to se 80 and try to view the source code of any ITS service lets say PZM3 in my case, the entire application goes for a dump with error
Exception condition "INVALID PARAM VERB: TEXTSTREAM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
A RAISE statement in the program "SAPLOLEA " raised the exception
condition "INVALID PARAM VERB: TEXTSTREAM".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
The termination occurred in the ABAP program "SAPLOLEA " in
"AC_FLUSH_CALL_INTERNAL".
The main program was "SAPMSEU0 ".
The termination occurred in line 220 of the source code of the (Include)
program "LOLEAU10 "
of the source code of program "LOLEAU10 " (when calling the editor 2200).
Any deas what the error could be??
On the other hand i tried to see the Service 'System' and 'webgui' from se80 di dnot find any..
Any ideas if we are missing in our landscape.
Message was edited by:
        RajK
Message was edited by:
        RajK

Hi RajK
> On the other hand i tried to see the Service 'System'
> and 'webgui' from se80 di dnot find any..
> Any ideas if we are missing in our landscape.
The services system and webgui are shipped within the installer of ITS 6.20. So you can't find them in the database via SE80, instead only in the filesystem.
Not your main problem, I know, but I just wanted to clarify.
Best regards,
Henning

Viewing the source code

hi,
I'm interested in doing some programming in Java but I'm having some real trouble just viewing the source code. First of all, I have a program I would like to look at and I have downloaded the binary files. However, after downloading the Java Development Kit, I still can't find a way to look at the actual source code. I have tried clicking everything in the C:\Program Files\Java\jdk1.6.0_12\bin file but with no avail. Is there a way to look at the actual source code? I've tried writing java but I really need examples in order to learn anything useful. Reading a HOWTO will only get me so far...
In case you are wondering, the program I have downloaded is called iFreeBudget. Like I said earlier, it's programmed in Java and I have downloaded the binary files but I can't find a way to view the actual code the programmer used to make the program.
Thanks for your time!
Mike

I've tried writing java but I really need examples in order to learn anything useful. Reading a HOWTO will only get me so far...I'm not exactly sure what you mean by a HOWTO but in addition to looking at examples you really should go through the tutorials here .
From your message I inferred that you are a complete java beginner. I think you will save yourself much confusion and trouble if you take the time to go through the tutorials.
There are code examples, instructions on how to setup and compile things, and all kinds of explanations of things that you will need to know.

How can I view the source code of chrome://browser/content/browser.xul?

How can I view the source code of chrome://browser/content/browser.xul of mobile FireFox?
In my desktop version I just open this page in new tab and view webpage source, but there is no option for FF mobile to view source code.
Best regards.

Does the view-source: protocol work on mobile?
*view-source:chrome://browser/content/browser.xul

How to view the java code of the message mapping,

Hi Experts,
how to view the java code of the message mapping,
how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi sowmya,
Open any Message mapping in IR. Press CtrlShift0(zero) to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.

View the source code before deciding which PHP CMS to download?

Maybe no one knows this site, for I just was recommend by a friend, if you want to install an Open Source [PHP CMS|http://www.phpkode.com/projects/category/php-cms/] but don't know which one to choose you can visit PHPKode.com and first view the source code of this PHP CMS with the file list feature on the page before installing it...

If you use SAPlink http://www.saplink.org - you can download the entire component.
If you want just the classes, that is a little bit harder. The classes are dynamically generated. There are different tricks to find out what the class names are. You should NEVER directly interact with the underlying classes. However if you just want to view the code in them you can see the class names in the debugger. Also if you want, you can just set a breakpoint within one of the methods and then choose utilities->breakpoints->display . You will see the name of the class where your breakpoint is set. It will be something like: /1BCWDY/4XLHG76LQV8VMTT2GRB2 - however you might find that it is difficult to look at the code from these classes; as we now restrict the ability to pull them up in the class editor. You just get a message that the object does not exist or is not assigned to a package. This restriction is a protection to keep anyone from accidentally changing the generated objects and corrupting the WD Component.

How to view the sql query generated in query designer..?

Hi experts,
Can i view the sql query generated by the query designer for a query in sap bw?
regards,
ksvsivam

Hi Sivam,
You can definitely view the sql query.
Go to RSRT and give the report name. Then goto Execute+Debug and click on it.
A new window will open, there tick the box Display SQL/BIA Query and the press on the ok button.
Finally click on execute. The Sql query will be displayed.
Hope this helps.
Thanks,
Rahul

How can we prevent viewing the source code of JSP by the user

Dear sirs,
how can we prevent viewing the source code by the user ( from the browser for the Viwe Sorce option) for a JSP file that use struts frame work.
infact i don't wan the user to view the javascript that in incorporated in the JSP for various purpose...
thanks and regards...
Sudheesh K S
INDIA

Dear sirs,
how can we prevent viewing the source code by the
user ( from the browser for the Viwe Sorce option)
for a JSP file that use struts frame work.
infact i don't wan the user to view the javascript
that in incorporated in the JSP for various
purpose...
thanks and regards...
Sudheesh K S
INDIAJSP and Servlets are programs/scripts that run on the server. The user/clients only sees the HTML output generated by the server. If you want to hide JavaScript from casual users then you can put the JavaScript code in a seperate file. This file can however be read from the Cache.

Viewing the VBA Code and Retaining during the code

Hi Experts,
Where can i view the VBA Code and Macros used in the Workbooks (If any). We are migrating the workbooks and we have some VBA Code used for formatting the workbooks. And after migration we lost the formatting features in the workbooks. How can i retain the earlier formatting. Anyone who was involved in a similar me share your experiences.
Thank You!
AM

Hi,
Migrating the workbook to 7.0: I did this, in following way:
-save it. At this stage the format is going to be exactly same as 3.x workbook. If you start refreshing, you loose format.
-Go to design mode and deselect 'apply format' option and save it again. Here you can see that you have lost the format.
-Format it again and save it.
-This should work now when you refresh. Refreshing takes.
Pls chk this links;
/message/3502939#3502939 [original link is broken]
/message/3693377#3693377 [original link is broken]
/message/3502939#3502939 [original link is broken]
http://www.techonthenet.com/excel/macros/refresh_pt2.htm
http://www.dicks-blog.com/archives/2004/09/27/ask-to-refresh/
Re: Where are the BEx variable stored
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/frameset.htm
Hope it Helps
Regards
CSM Reddy

How to view the source code for a Native Method

hi
i am using a Native method Math.pow() ;
but since it is a native method it is taking more time to execute ;
since this method i had to call at least 700 times it is affecting the performance of the application ;
so i am thinking to write the user defined method based on the logic which has been implemented in the pow() method ;
for that i need to know in which .c file this method has been written ;
or else it can not be viewed at all ( if it is in the .dll)
can u help me out
nik

Hi!
Here is part of StrictMath.java code.
* The class <code>StrictMath</code> contains methods for performing basic
* numeric operations such as the elementary exponential, logarithm,
* square root, and trigonometric functions.
* 
* To help ensure portability of Java programs, the definitions of
* many of the numeric functions in this package require that they
* produce the same results as certain published algorithms. These
* algorithms are available from the well-known network library
* <code>netlib</code> as the package "Freely Distributable
* Math Library" (<code>fdlibm</code>). These algorithms, which
* are written in the C programming language, are then to be
* understood as executed with all floating-point operations
* following the rules of Java floating-point arithmetic.
* 
* The network library may be found on the World Wide Web at:
* <blockquote><pre>
* http://metalab.unc.edu/
* </pre></blockquote>
* 
* The Java math library is defined with respect to the version of
* <code>fdlibm</code> dated January 4, 1995. Where
* <code>fdlibm</code> provides more than one definition for a
* function (such as <code>acos</code>), use the "IEEE 754 core
* function" version (residing in a file whose name begins with
* the letter <code>e</code>).
* @author unascribed
* @version 1.9, 02/02/00
* @since 1.3

View the SQL code

Similar Messages

Maybe you are looking for