View this row after submitted

I have 2 pages (insert.jsp and submit.jsp) and i want to display all the information that I've just submitted in the submit page (submit.jsp) including the request. no (primary key) which is automatically generated in the database.
I try to pass the row key from insert page (insert.jsp) to the submit page (submit.jsp) as the paramater to find the request. no (primary key) but it failed... how to solve this? your help is very much appreciated.

Hi,
This is a bug. Please contact support to get a fix for this.
Thanks,
Sharmila

Similar Messages

Takes longer then normal to load hotmail after submitting user credentials and doing this on other websites

firefox takes longer to load webpages after submiting user credentails on websites such as hotmail or banking websites. this has been doing this since i upgraded firefox. also been experiencing alot of firefox crashes since the upgrade. firefox is usually a better and faster brouwser then IE9.

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> ''Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

SBS 2011 VM and Server 2012 R2 Hyper-V host. After rebuilding the host image, no email is received, EMC states "You don't have sufficient permissions to view this data" when looking at organization config. Server config not shown on EMC.

Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael Faklis

Hi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu

Going back to same row after saving changes in classic report

dear all,
I have a long classic report .User is able to update different rows of this report using MR update process.Now user is asking for easier flow.What he wants is to be able to go back to same row after he saves the changes.How is it possible to do so
Thank you so much,
Zahra

Hi,
I have one sample
https://apex.oracle.com/pls/apex/f?p=40323:40
When you change Active column select list, page is submitted. After submit JavaScript scrolls report
See this post about details
HELP TABULAR FORM CURSOR FOCUS
Regards,
Jari

ALV - Adding an additional row after subtotal

Hi Friends,
I want to develop an ALV report wherein I want to have an additional row after the subtotal in ALV to show some calculation.
Please refer the below link for the report layout. In the ALV output after subtotaling the total operating revenue and total other income i would like to have an additional row to show the Total revenue(total operating revenue + total other income). Similarly after subtotaling the cost of sales, I would like to show the gross profit(total operating revenue - cost of sales) in an additional row. Please let me know whether this is possible in ALV Grid or List.
http://www.imagebanana.com/view/gpl4ynnk/report_layout.jpg
Regards
SAPient

Hi ,
Please go through the below link it may help you .
LInk : [Sub total text |http://wiki.sdn.sap.com/wiki/display/Snippets/DisplaysubtotaltextinALV+grid]
Regards,
Maruthi

After submitting a request the find button does'nt work in R12.1.1

Hi,
We have an instance where in After submitting a request the find button does'nt work and we have to close it and again press view->Requests. I think there is a bug for this in R12.1.1 as i have read some where in metalink. But can't find now. Does any know of this document or method/patch to fix this.
Regards
Taher

Taher,
Can you find any errors in the application.log file or in the database log file?
Do you have any invalid objects?
Try to regenerate the form via adadmin and see if this helps.
Also, if you have any other identical instance, please see if you can reproduce the issue.
If none of the above helps, obtain the FRD file as per (Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications) and see if more details will be collected in the logs.
Regards,
Hussein

Retain newly created rows after page navigation.

Hello,
I have designed two pages. On First page I have to create multiple rows and to assign some values I need to open another page.
The problem is once we create new rows on view object and if we redirect to any other page its view object is automatically executed and newly created rows will not be retained.!
I have tested redirection using both methods with retain AM to True, but its not working.
pageContext.forwardImmediately("page",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
pageContext.setForwardURL("page",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
Please suggest something....
Thanks,
Swati

Hi Krithika, Thanks for replying...
Krithika wrote:
If you want to create new row in table and commit to the db, please find this sample:
http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html
This is done automatically when user clicks on commit button on ADF create form, rows gets commited in database.
I just need to display these newly created rows on ADF table on the same page below commit button.
Can you give more details about your usecase..?
What happens when the same user comes back after closing the session? Do you want still show the blank page/table with out any previous data created by the same user..? If yes, what happens to the previously stored data..?
Basically, give a brief note on what you are trying to achieve..?
When user comes back to this page after closing this session, it will not show any rows in the ADF table.
user will enter new values to create new rows and this time again on click of commit button the newly row created for this session should be shown.
The previously created rows are already commited to database table
Hope I am able to explain the requirement. Please let me know for any questions on requirement
Regards,
Tanveer

IIS Server 7.5 403 Forbidden Access Denied Error after submitting login Page

Hi All,
Need help to resolve below error:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
Getting this error once hitting submit button, here i am entering only user name it should give an alert msg asking for the password.
The application is running on IIS server 7.5 and recently enabled Anonymous Authentication and since then it is giving this error.
But if i am accessing the application locally it means in server machine it is working but from remote system it gives 403 error.
Regards,
Kirti

Hi,
it's difficult to say what exactly is causing without more info on you confiuration.
I'm, from you description, assuming a webpage that was configured for forms authentication. You enabled anonymous authentication and now it no longer works.
Forms authentication relies on webpage logic. In most cases, you cannot replace it 'like that' by another authentication method as the login page contains logic on how to store the usercredentials and/or authorization and were to go after authentication
has finished.
Anonymous authentication relies on the application pool identitiy (or the anonymous user) having RX access to the content. Depending the configurations you made when enabling anonyous authentication, you might aditionnaly need to assign an identity
to the anonymous user and configure ntfs privilges on the content.
Check IIS logs and event logs for information. if you do not succeed to resolve, I would suggets to post on teh iis.net forums and include detailed configuration information.
MCP/MCSA/MCTS/MCITP

Problem with "Uncommited changes" when viewing certain rows in detail group

Hi Guys,
When I try to view an row in a detail group I get a popup box saying that there's uncommitted changes. This will happen even when there's no changes in the master group. It will also happen for all rows in the detail group except for the first row listed.
e.g.:
Master Group is department
Detail group is employees
The detail group will display:
Employee 1
Employee 2
Employee 3...
If I select to view the details for employee 1 it will go to the form view without any problems, if I select any other row (2,3,4..) I get a popup box warning that there's uncommitted changes on the current page.
If I go into the form view of employee 3 (confirming that there's uncommitted changes on the current page as I do) and then use the breadcrumbs to go back to the department screen then Employee 3 is the only detail group row I can go into without getting the uncommitted changes popup.
How is it possible that different rows in a detail group can cause this popup to happen?
I am using JDev 10.1.3.2
and the pages where generated by JHS 10.1.2.26
Is it possible that when the radio button that is used to select a detail group is changed that this is showing up as an uncommitted change in the javascript?
I need a fix for this urgently so a fast response would be greatly appreciated
Bar

Im using a custom method to stack the detail groups and Im missing the line that adds the radio button to the ignore list:
#if (${JHS.service.generateJavaScript})
<afh:script text="addToIgnoreChangedFields(['${group.name}:${group.name}Table:selected']);" id="${group.shortName}IgnoreChangedFields"/>
#end
is there a certain place to add this in the template?

Insert Blank row After every Row in alv report

How to insert blank row After every row in Alv report

what do you mean by a 'blank row'? ALV displays tabular data with 'any' number of columns. Now if you actually want a blank row (no columns at all, just a row), then that is just not possible. If I'm not mistaken, this question was posted before, so try to do a search on SCN. See what is says.

Add a row after Total row in ALV report

Hi Experts,
I have a report is displayed by ALV format(not use function module to display it but use Class cl_gui_custom_container),I want to add a row after the total row. for example,
Customer   amount1    amount2    amount3
10000         1,234        1,000         2,000
10001         4,000        2,000         1,000
10002         1,300        1,000         3,000
11000         1,200        4,000         3,000
     Total:     7,734        8,000         9,000
Ratio%        31.27       32.34          36.39
the row of 'Total' is calculated by fieldcat-do_sum = 'X' But after the Total row we need a Ratio row to display the ratio. Yes we can calculate the total amout and ratio and then append it into the output itab, but we don't like this solution.We want to keep the total function in the ALV report.Any experts can poit me a direction. Thanks in advance.
Joe

Djoe,
First you need to handle the user command,in order to capture the button action. For this you need to implment a class, i am attaching sample codes here
In top include write the following code
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
    METHODS:
     handle_toolbar FOR EVENT toolbar                   " To add new functional buttons to the ALV toolbar
                     OF        cl_gui_alv_grid
                     IMPORTING e_object,
     handle_user_command FOR EVENT user_command          " To implement user commands
                        OF cl_gui_alv_grid
                        IMPORTING e_ucomm .
PRIVATE SECTION.
ENDCLASS.                                               " Lcl_event_handler DEFINITION
Now   <b>Class implementation</b>
CLASS lcl_event_handler IMPLEMENTATION .
METHOD handle_toolbar.                                " Handle Toolbar
    PERFORM f9500_handle_toolbar USING e_object.
ENDMETHOD .                                            " Handle_toolbar
METHOD handle_user_command .                          " Handle User Command
    PERFORM f9600_handle_user_command USING e_ucomm .
ENDMETHOD.
ENDCLASS .                                              " lcl_event_handler IMPLEMENTATION
FORM f9600_handle_user_command USING p_e_ucomm TYPE sy-ucomm.
CONSTANTS:c_newl(4) TYPE c
                      VALUE 'NEWL',               " New line
            c_copy(4) TYPE c
                      VALUE 'COPY',               " Copy
            c_corr(4) TYPE c
                      VALUE 'CORR'.               " Correction
CASE p_e_ucomm .
    WHEN c_newl.
Create a new line
      PERFORM f9610_insert_new_line.
ENDFORM.                                          " f9600_handle_user_command
FORM f9610_insert_new_line .
*Data Declarations
DATA: lt_rows     TYPE lvc_t_row,                 " Itab for row property
        ls_rows     TYPE lvc_s_row,                 " Work area for row
        lv_cntid    TYPE i.                         " Counter
DATA: gv_index TYPE sy-index.
CLEAR gs_last.
CALL METHOD gr_alvgrid->get_selected_rows
    IMPORTING
      et_index_rows = lt_rows.
READ TABLE lt_rows INTO ls_rows INDEX 1.
IF sy-subrc EQ 0.
    gv_index = ls_rows-index + 1.
ELSE.
    gv_index = 1.
ENDIF.
DESCRIBE TABLE gt_last LINES lv_cntid.
lv_cntid = lv_cntid + 1.
gs_last-cntid = lv_cntid.
INSERT gs_last INTO gt_last INDEX gv_index.
LOOP AT gt_last INTO gs_last FROM gv_index TO gv_index.
Make the new line editable
    PERFORM f9611_style.
ENDLOOP.
CALL METHOD gr_alvgrid->refresh_table_display
    EXCEPTIONS
      finished = 1
      OTHERS   = 2.
ENDFORM.                    " f9610_insert_new_line
You can ask questions doubts if any!
regards
Antony Thomas

Type_1099 error after submitting supplier open interface import

Hi,
I am working on supplier Importing Interface. I have to import suppliers, and supplier site information into base tables.
I successfully loaded the data into AP_SUPPLIER_INT and AP_SUPPLIER_SITE_INT interface tables. After submitting 'SUPPLIER OPEN INTERFACE IMPORT' program to move data from interface to base table, i am getting below error.
ERROR: '1099 Type is inconsistent' for a particular vendor.
I checked type_1099 validation with the base table AP_INCOME_TAX_TYPES.INCOME_TAX_TYPE, validation was fine.
Could anyone has any idea, how to solve this error.
Thanks in advance.

Hi;
Please check below note which could be helpful for your issue:
1099 Processes Troubleshooting Guide [ID 110399.1]
Reagard
Helios

How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?

How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?

You need to follow the instructions in this article that best apply to your situation:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
If you do not have a backup in either iCloud or iTunes, then you will have no way to retain the information on your device because you will have to restore it in order to access it again.
Sorry,
GB

How to display a row after a subtotal field in ALV Grid

Hi All,
My requirement is to print a extra row with values and constant text after printing subtotal values in ALV Grid.
e.g. TOTAL 12.23 ---> Subtotal field
Tax 5.2 ---> extra row after subtotal field.
Please help me....
Thanks in advance.
Regards
Ajay

Hi
You can try using INSERT <WA> OR INSERT INITIAL LINE .
fill the wa with tax value.
INSERT <wa> into table < internal table >
A row will be inserted into internal table with the values.
Try this and let me know.
Thanks
Hariharan

View this row after submitted

Similar Messages

Maybe you are looking for