View two pages option is greyed out
MacBookPro Retina 10.9.5 > iBook app > for no known reason, halfway through reading a book > View - the two page option is greyed out and I can find no way to revert from the one page view.
Help please
Ah! I did open it at one stage but more out of curiosity than anything else. At some stage I added a page number and it was some time after that when the app went from double to singe page mode.
I was not able to close the Notes panel, so quit iBooks, restarted the computer, but still only one page and the Notes panel was, and is still open - I can find no way to close it.
Thanks for your reply.
Similar Messages
-
ATA190: Web GUI page options are greyed out
ATA190: Web GUI page options are greyed out and device failed registration to CM 10.5
do anyone have a resolution o this issue?Options Greyed out issue can be due to the below Bug, which is listed as just cosmetic:
ATA190: Web GUI page options are greyed out
CSCur53864
Description
Symptom:
ATA190: Web GUI page options are greyed out.
Most of the options in the Web GUI of the ATA 190 are greyed out and cannot be configured. There is no option in CUCM configuration page or the ATA190 Web GUI to unlock the configuration options.
Here is a list of a few of the pages that are greyed out and do not allow any editing:
Network Setup > Basic Setup > Internet Settings
Network Setup > Basic Setup > Time Settings
Network Setup > Advanced Settings > VLAN
Network Setup > Advanced Settings > CDP & LLDP
Administration> Log > Log Module
Administration> Log > Log Setting
Administration> Log > Log Viewer
Conditions:
ATA 190 Devices running firmware version running 1.1.0 (006)
Workaround:
These options are not configurable and are supposed to be view only. The issue is cosmetic.
Most of the Configurable settings are available under the Voice Menu and Administrative Menu.
-Terry
Please rate all helpful posts -
Photos per page option is greyed out.
Hello. I would like to print out two copies of the same photo on a 4x6 paper. The print setting option for this is greyed out. Any suggestions? Thank you iphoto wizards!! Melody
Any more info available? Like what you are doing?
The correct way to do that is to select the photo and select the printer, print size and paper size (must be larger than 6 x 8) and click customize - click on the setting tool in the tool bar (the gear looking thingy) and select multiple copies of the same photo - the preview will reflect your selection - and click print and make any printer specific selections and click print to print
LN -
All iWeb options are greyed-out, and can't make a new sites or pages.
Hello,
I am having a very annoying problem with iWeb. Every option is greyed-out! I can't make a new page or site, and it quits as soon as I close the iWeb window. It is version 1.1.2 I have tried installing useless updates for iWeb that did nothing, and I've tried to open iWeb from iPhoto by clicking the iWeb button, which also did nothing. I'm just about to give up on it.
Can anybody please point me in the right direction or have a fix for this? All help will be appreciated!Hi ineedagoodalias,
The answer to your problem isn't necessarily the simplest, but I'm 99% sure that it will work for you.
You need to delete and reinstall iWeb. Not hard to do; you just need your installation DVD's that came with your machine.
Drag the iWeb.app from your Applications folder to the trash. Spotlight for other elements of iWeb, and trash those as well. Empty the trash and restart your machine.
On your recovery disks, as you move through the prompts, look for "Install bundled software". Customize the install to include only iWeb. After reinstalling iWeb you will be back to 1.0.1.
Update the app to 1.1.1 directly from this link:
http://www.apple.com/support/downloads/iweb111.html
This will get you going, and you can update to 1.1.2 when you are sure everything is working properly. For other FAQ on iWeb, please see this link:
http://web.mac.com/varkgirl/iWeb/iWebFAQ
Be sure to let us know how it goes.
Mark -
I go to print and try to select the radio button to print all frames, but It's not working
The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page. -
I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out. Does anyone know why?
Post your question in the forum for Adobe Acrobat.
-
Two sided print option is grey out
Recently, I noticed that when I need to print two-sided documents, the "two-sided" print option is greyed out. I have gone into System Preferences Printers & Scanners- and under "options" for the printer enabled the HP Two-sided Printing Accesory (Duplexer). This button continues to disengage (won't remain enabled) and each time I need to print two-sided, I have to repeat the above process. Please help
Hi,Try resetting the printing system and check if that may help:*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Printers & Scanners.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets. Next click the plus sign and select the listed printer. Within the Use drop down menu select the printer model and press the Add button. Hope that may help,Shlomi -
I was able to print from adobe digital editions up to two days ago and now I do not have the option to print. The "Print" option is greyed out. Please help.
Printing Expiry option might be set by the Publisher at server level. Right click on the book and select Item Info to know about the book permission.
-
I cannot figure out what I am missing here. I have a PDF Portfolio completed and now want to E-Mail for Review. But this option is greyed out on my Comment Menu dropdown list. What to do? Thanks!
Two Places to Check
In iChat in the Video menu (May say Audio) to the right of the Buddies one there is Camera Enabled. It should show a tick next to it.
Next in the View Menu the Show Video Status item also needs a tick.
If those two items are ticked then go to the Apple icon top left > About this Mac > More Info button to open the System Profiler.
Use the reveal Triangles and go to Hardware > USB and see if the camera is listed.
8:33 PM Wednesday; April 23, 2008 -
Browse Sequences option is greyed out
Hello everyone,
When I use the wizard to setup my Generate output the Browse
Sequences option is greyed out. The checkbox is in the second
window in the wizard under the Additional Options view.
The navigation buttons for Next, Previous, and Sync TOC in
the webhelp output don't display. However, the close nav pane is
displayed and works fine.
Is there a way that I can enable the browse options in the
output?
thanks
- AziHi Azi
In addition to what my esteemed colleague Peter has offered,
you may wish to review the link below:
Click
here to view the page
Cheers... Rick -
Bookmark option is greyed-out, how can I create a bookmark from text?
In the Link Inspector the Add bookmark option is greyed-out. I want to make a heading on page 4 a bookmark so that readers can jump to that page from the beginning.
Confirm your process against the topic '- Hyperlink two words/text -' in iBA Tips and Tricks 01.
If a jump to page 4 is that important, I'd consider moving the content around so the user doesn't have to travel to see it - otherwise, just link to the first word on page 4 if using the title/heading gives you trouble. -
Can you view two pages of a document in Pages 5 as you could with the two up feature in the older version of pages?
You should check out Lucidpress (www.lucidpress.com). They have built a great cloud-based layout tool that has facing pages option in the document panel on the right.
-
Newbie: In printing dialog, "Scale to" size options are greyed out
I am in the initial stages of figuring out how to use Aperture (v1.5). I am currently trying to make a 5x7 print of a photo.
In the print dialog, "Scale to" 4x6, 5x7, 8x10 size options are greyed out (only "fit image" and "fill entire page" are available).
I've tried searching through the forums, but to no avail...
Thanks!Click the Arrange button on the toolbar and select the desired option.
-
The Inline options are greyed out. I can't imagine why this wouldn't work like it does in Pages. Is there a work-around?
Gone?
iBA isn't Pages
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html -
IPod touch no longer opens iTunes -- option is greyed out in device Summary
I've been using my 1st gen iPod touch with iTunes for two years with no problems. Recently when I plug the iPod into my computer, nothing happens (besides charging). If I manually open iTunes, the iPod does appear as a device, and I can click Sync to get things going -- but the "Open iTunes when this iPod is connected" option is greyed out. Anyone know how to get this option back so my iPod will automatically open iTunes when I connect it to my iMac?
Looks like that, or a combination of the two took care of the problem. Yaaaaayyyyyy!
Thanks again for your help. It got a little dicey because without the manage my own files box checked iTunes tried to sync the iPod to iTunes and there wasn't enough room on the iPod for all of the music. Once I got the prevent sync bow unchecked in Preferences and unchecked the manage my files and use disc boxes unchecked I was able to check the start iTunes box and the manage my files box an apply it so that I have the best of both worlds going own.
Life is good!
Thaks again Brother.
Maybe you are looking for
-
I am trying to add jdbc to my project and find that jdbc components seem to be missing compiles and runs fine in IDE but when I try to run outside IDE I get this error Exception in thread "main" java.lang.NoClassDefFoundError: org/netbeans/lib/sql/ D
-
How do I edit a recording?
I recorded my sister's outgoing voicemail message using Garage Band and by holding my phone up to the computer mic. There is a lengthy blank space at the beginning that I want to remove but cannot figure out how. Thanks in advance for your help.
-
Mail sends extra attachments - Can I stop this?
For some reason, Mail is sending extra attachments that Outlook users see whenever I actually include one or more attachments. This happens even if the attachment is at the end of the message. It also happens if I am sending plain or rich text. It do
-
Problem exporting QuickTime file (*.mov)
When I try to export my Flash animation as a QuickTime movie (*.mov) in Flash 8 Professional (or in Flash MX 2004, doesn't matter) an error appears stating that an error occured because a required QuickTime component could not be found. I have Apple
-
I loaded the newest 7.0.2 to my i phone and got an italian appstore, not the norwegian one I use, what can I do???