View usage and details from previous contract.

I have been a Verizon customer for quite some time. I'm on my third contract. Is there anyway to view calling usage in detail(phone numbers, location, minutes) from my previous contract? I have been able to use the analyze usage tab and it has aloud me to view up to a year ago. Can I view any further in history? I also renewed my 2 year contract only 5 months ago. Any info would help.

Your account information is available on line for 12 months. Contract terms/ and renewals do not affect the history available, unless you changed the account owner.
You should be able to view your billing for the previous 12 months, call details for all of that and texting details for the last 3 months. You can call customer service and they may be able to email you pdf copies of billing more than 12 months ago.

Similar Messages

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H.

HT4483 Trying to download previous apps and videos from previous lost ipod to recently purchased ipod

Trying to download previous apps and videos from previous lost ipod to recently purchased ipod

Holmes girl wrote:
Trying to download previous apps and videos
Make sure you are using the Apple ID that made the Original Purchase/Download.
More Info here > http://support.apple.com/kb/HT2519

Copy Control - Address Details from Quantity Contract to Purchase Order

Dear Experts,
When I create a Purchase order w.r.t a Quantity Contract, in some cases the address details (such as street address, phone #, e-mail etc.) are copied from Quantity contract and in other cases they are copied from the vendor master. I compared the vendor masters and quantity contracts in both the scenarios and cannot figure why this is so.
The way I create a PO is to use the selection variant option in ME21N to pull in the Quantity contract and then 'Adopt' the details.
Is there a address copy control functionality somewhere at the vendor master level that governs this behavior?
Examples:
1) Vendor A has telephone 888-888-8888 on vendor master data and QC 5000001 has 999-999-9999 as telephone for the same vendor in the quantity contract. When I use this QC, 999-999-9999 copies over to PO and this is desired/correct
2) Vendor B has telephone 888-888-8888 on vendor master data and QC 5000002 has 999-999-9999 as telephone for the same vendor in the quantity contract. When I use this QC, 888-888-8888 copies over to PO and this is not desired/incorrect
Any insight would be helpful
Thank You
Siva
Edited by: Sonshine on Feb 23, 2012 3:53 PM

Hi Arminda,
The note refers to the Plant/shipment Delivery address and I am having trouble with the communication address (supplier address, email, fax, telephone etc.) of the vendor.
Any other inputs?
Thanks
Siva

Report to display total and detail from table GLT0 and FBL3N

hi guys,
we have the requirement to show a report with total amount per GL account from table GLT0 and to as well display the detail from tcode FBL3N ..
shall i use normal report via SE38, if yes, what is the table that stores detail from FBL3N or does report painter support the above requirement..pls advice

use report SAPF070 as sample
(compare documentation!)
hope that helps
Andreas

Can I import Events and Projects from previous versions of iMovie

I just installed the latest version of iMovie - but I have a bunch of projects, events, etc. from previous version - going way back. Is there a way to move those items into the new version.

Yes. File - Update Projects and Events. Your iMovie 9 folders will still be available. (I would not delete any iMovie 9 stuff untill you are happy with iMovie 10 - its quite different.)

Unbale to view videos and pictures from 8500 curve to my PC

Hi,
I am unable to run Videos nor i am able to view my pictures taken from 8500 (both videos and pictures) when i transfer them to my pc. Plz suggest what needs to be done.

Well... could you say why you can not view your videos or pictures on the PC?
Do you get an error message?
What happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SQL/VBA SDK to view Universe Connection details from CMS

Hi
Am trying to find Database Name and User Name from Universe Connections. It looks like all these details are placed as a Property bag. So am looking for VBA code to view the Property bag or any direct Query Builder SQL to fetch these details.
Please share your Inputs.
Thanks.

Hi Ted
The MetaData DataConnection objects housed in the CMS repository don't have a public API associated with them.
Thanks for your information. I found the below code from BOB forum which gets Database Name etc from CMS, but am not able to make it work this in VBA (Excel Macro).
Imports System.Xml
Public iStore As New CrystalInfoStoreLib.InfoStore
Public Connections As CrystalInfoStoreLib.InfoObjects
Public ConnectItem As CrystalInfoStoreLib.InfoObject
Public ConnectObject As New CrystalConnectionPluginLib.Connection
Dim QueryStr As String = ""
Dim ElementStr As String = ""
Dim NWLayer As String = ""
Dim RDMS As String = ""
QueryStr = "select SI_ID, SI_CREATION_TIME, SI_UPDATE_TS, SI_REVISIONNUM,SI_OWNER, SI_DESCRIPTION, SI_NAME, SI_CONNUNIVERSE, SI_METADATA_PROPERTIES from CI_APPOBJECTS where SI_KIND = 'MetaData.DataConnection' and SI_PARENTID=123 order by SI_NAME"
Connections = iStore.Query(QueryStr)
For Each ConnectItem In Connections
Dim sr As New System.IO.StringReader(ConnectItem.Properties("SI_METADATA_PROPERTIES").Properties("SI_METADATA_BVCONN_ATTRIBUTES").Value)
Dim doc As New Xml.XmlDocument
doc.Load(sr)
Dim reader As New Xml.XmlNodeReader(doc)
While reader.Read()
    Select Case reader.NodeType
      Case Xml.XmlNodeType.Element
        If reader.Name = "Name" Then
          ElementStr = reader.ReadElementContentAsString
            If ElementStr = "NetworkLayer" Then
              NWLayer = reader.ReadElementContentAsString
            End If
            If ElementStr = "RdmsName" Then
              RDMS = reader.ReadElementContentAsString
            End If
        End If
    End Select
End While
Next
MsgBox(ConnectItem.Title & vbCrLf & NWLayer & vbCrLf & RDMS)
Thanks.

Peel off hourly output value and subtract from previous hours (then write to file)

Here is another problem I have been working with and what I have tried so far. Right now, my current VI is writing data to an excel file at a point every second. I would LIKE peel off a point from this datastream once every hour and subtract it from the previous hour's value and write an hourly value to an excel file (same file or different file is ok). I was working with a guy here at my university who had some ideas to use the Elapsed time function. I have included a screenshot of the part of the VI containing the function we were working on. We never could get it to work quite right. We were having some problems getting the shift registers to work (used to subtract the current hour's value from the previous hour's value). Let me know if you have any ideas, if maybe we are on a good pathy, or maybe I should try something altogether different. I'm just looking for a simple solution at this point.
Thanks,
Jeremy
The local variable "Total Consumption" is the data stream off of the hourly values are being taken. Currently (not shown in this screen shot), the value of "Total Consumption" is combined with the other channels into one signal that is fed into the "Write to Measurement File" VI (shown at the right).

You have a true constant wired to your stop button for the loop, which means the loop will only run once.
You may want to consider the positions of the previous and current indicators inside that loop. It's not clear how you want them to function. The previous indicator doesn't get updated until right as the elapsed time occurs. The case structure gets executed, and you will immediately have a new previous value calculated, but you won't see that again until the end of the next hour. Not sure if you are updating the current value in the false case as well. Otherwise that would look like stale data for an hour. If you are updating it in the other case, than you should move the local variable and the indicator completely out of the case structure and only pass in the wire to the subtraction function.

Clips stretched in Canvas view with same footage from previous sequence

I created a 1 minute video to play on a laptop that I've edited down to 30 seconds. This 30 second version will be playing on a television, so I changed the Sequence Presets to "DV NTSC 48Hz" and the QuickTime video settings from "Photo -JPEG" (since I'm using still shots in the video) back to "DV/DVPRO NTSC."
I'm using the exact same clips and essentially duplicated the previous sequence and edited down the clips. But for some reason, the clips appeared stretched in the Canvas with black bars on either side, and it exports the same way as a Quicktime file. I checked the Sequence settings on both the 1 minute and 30 sequence versions, and they are identical. Any idea why the clips would all of a sudden stretch and how to resolve it?
Thanks!

Still images within the sequence are Photo JPEG Quicktime files
Why? FCP can read actual picture files. Just curious. PhotoJPEG at 75%?
so I changed the Sequence Presets to "DV NTSC 48Hz" and the QuickTime video settings from "Photo -JPEG" (since I'm using still shots in the video) back to "DV/DVPRO NTSC."
What was the sequence setting before? Why did you use that setting if your footage was DV?
OK...try this. Explain your workflow. What did you start out with as your settings? Why did you do this? What was your intended workflow?
If you put a DV file into a sequence setting of anything other than DV, the file will adjust to meet those parameters. For example, I edit DVCPRO HD 720p at 960x720. When I drop a DV file into the sequence, it will scale up to 150% so that it fits full screen (with black bars on left and right...200% makes it fill the screen). I have adjusted the settings on the clip.
Now, if I adjusted the SEQUENCE settings, the clip settings remain the same...still 150%...so they will appear large or distorted. You then need to fix each clip until it is right with the sequence. Or fix one and then copy and paste the attributes to the other.
Still, I don't understand why you were in a different preset to begin with. Was the first clip you added to the sequence a PHOTO JPEG still, so the settings adjusted to that?
Shane

How can I restore folders and files from Previous Systems folder

I have been unable to migrate files (or even find the option to migrate files) located in my Previous Systems folder. I've been able to change the Privilege of these files to Read & Write (though my Permissions still indicate "You can only read.") and drag them from my previous Users folder to my current desktop, which creates a situation where I have them but am still unable to alter them (or delete them).
thanks, all.

Here's my exact issue: I've spent many hours converting vinyl records to mp3s, which were then stored in the iTunes folder of my previous system. Upon performing the Archive and Install, all of these files were located in my Previous Systems>Users>"X">Music folder, which initially could not be opened, prompting the notice, "The folder Music could not be opened because you do not have sufficient access privileges." So, I clicked "Get Info" and changed the Privilege from Read Only to Read & Write. From there I could open the folder, and as you pointed out, move these files wherever I chose. The problem is that I can't use them in any practical sense; I can't import them to my iTunes library and I can't delete them, being notified, "The operation can't be completed because backup items can't be modified." Which, would lead me to believe that I have yet to restore them properly.

SQL TEXT and ID from previous Snaps

Hi Gurus,
Need help please, few days ago a SQL was ran in one of our database release 10.2.0.4 which contains the bind variables values passed by the application. That SQL is not in library cache and can't run due to missing/unknown variable values. I have the SQL text , how can I find the snap id/sql id for this sql text which can search through the snap id (unfortunately I dont have SQL ID either).
Thanks
-Samar-

Hi,
You can try querying the hist views:
select sql_id from dba_hist_sqltext where sql_text like '%%';
dba_hist_active_sess_history
wrh$_active_session_history
Do you have any tools like Toad? You can try running an awr or ash report (if you have the license for it) within the approximate time when you think the query was run.
Thanks and Regards,
Raj..

Adobe Bridge CS4 doesnt keep workspace layout and folders from previous session.

After I was working with my photos in specific folder I set workspace layout to specific size of UI elemenst. Like preview windows size, thumnnail size, navigator panel size and so on. When I restart my PC and launched Bridge again - it is again meessed up nad set to some strage sizes and the main bugger it doesnt preserve folder I was working before.
What might be a problem?
Thank you
Bridge CS4 3.0.0.464
Windows 7 Professional 64bit.

Assuming that you are closing Bridge correctly and not just shutting down the computer, the fault is probably with the fact that Bridge is Autostarted in the background due to it being enabled in Bridge preferences.
Setting that as default was a big mistake from Adobe.

I cannot view photos and videos from my Iphone 4 on Iphoto.

I just purchased a new Iphone 4 last week. When I connect it to my computer it recognizes there are photos and videos there but I cannot view them or import them. Can anyone advise?

Hello evanbn. I can help you with figuring out how to view your pics and music. Have you attempted to connect your device to your PC and view the files? Were you ever able to view your pics and music on your phone using your SD Card?
If you are unable able to view the files on your PC or your phone the SD Card could be corrupted or the files could have been erased. Do you recall re-formatting the SD Card? This erases all saved data. I hope this information helps!
ChaunceyM_VZWSupport
Follow us on twitter @VZWSupport

Recovery of tags and albums from previous catalog

I recently transferred my photos and catalog to a new computer, but was not able to get PSE9 to recognize the original catalog. Adobe tech support advised me to rebuild the catalog, which was mostly succesful. However, all of the tags, albums and star ratings were lost. Is there any way to recover those from the old catalog? I have already uninstalled PSE from the old computer, but still have all of the old data files.

When I did the transfer of files from my old computer to the new one, I used Windows Easy Transfer, which moved all of My Documents folder, including My Pictures, which contains all of my photos and all of the Adobe support files, including the catalog (catalog.pse9db). I then installed PSE9 on the new computer and used the Catalog Manager to point to the catalog. Part of the problem with the catalog appeared to be that the path to the My Pictures folder was different on the new computer than it was on the old computer. I tried to Reconnect All Missing Files, but PSE was never able to find them. That's when Adobe Tech Support recommended I just rebuild the catalog.
I was pleased that the captions on the files were restored with the building of the new catalog, but the tags and albums were lost. Are they stored in the catalog or in another file? When I rebuilt the catalog, it looks like it used the existing one, since the old catalog is no longer in the Adobe My Catalog folder.
The other files in the My Catalog folder are:
backupCt.dat
collstatus.dat
face.thumb.9.cache
itemData.mk4
rmf.3.cache
tagstatus.dat
thumb.5(1).cache (has not been modified since transfer to new computer)
thumb.5.cache
tn.4.cache (has not been modified since transfer to new computer)
watch.2.cache
I've gotten some other replies that sound like I'll probably have to manually recreate and attach the tags. I've got over 6000 pics, so I'll appreciate any help you might have.

View usage and details from previous contract.

Similar Messages

Maybe you are looking for